Imac dvd drive, will not read games disks

imac dvd drive, will not read games disks whilst running in windows 7, cd and film dvd run ok. Can not believe Apple care who told me I cannot run pc games on iMac EVEN under windows 7. Any help please.

Zap the PRAM and Reset the SMC, then try again.

Similar Messages

  • CD/DVD Drive will Not read CD/DVDs

    This desktop is only about 3 months old and so far has worked great!! But since last week for some reason the CD/DVD Drive will not read any disc. The tray will open but then nothing happens at all once a CD/DVD is in. Doesn't even sound like it is spinning. Any ideas?? Please help!! Thanks!!

    Also it is running Windows 8 and is a Ideacentre K410. And the CD/DVD Drive it is showing I have installed is TSSTCorpDVD-RW SH-216BB Not sure if that has always been the drive or not.

  • DVD drive will not read DVD-Roms

    I recently tried to reinstall a game that I had played previously, only to find that my drive will not read it. I can hear the disk spinning, but my computer will not recognize that there is a disk in the drive. I tried some of my other games and I noticed that all of the older games, that ran on CD-Rom, had no trouble installing, while the ones that ran on DVD-Rom never showed up in the drive.
    This is strange because I have installed all of these DVD-Rom games on my laptop before with no problem. I've tried doing simple fixes, like updating everything and uninstalling then reinstalling the drivers, but nothing helps. 

    Hi,
    If it worked before then try few System Restore points and check. Could have happened due to some update.
    Also provide the Product number of your notebook if restore doesnt help.
    Note:
    If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
    Although I am an HP employee, I am speaking for myself and not for HP.
    **Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed.

  • My CD/DVD drive will not accept a disk anymore. Any ideas?

    My CD/DVD drive will not accept disks anymore. Any ideas to make this work short of a very expensive replacement?

    Read the os Help menu. 
    Apple Portables: Troubleshooting the slot load optical disc drive  
    Cures for an uncooperative CD/DVD drive

  • Why my dvd drive will not read or run any install software,

    after i did my system recovery my dvd drive will not load or run any software, need somE HELP

    will the drive read cds? If the ODD will read the cds then it maybe a update will fix it. If it won't read those too, you may need to get a new ODD (dvd drive). 

  • Help :( DVD Drive will not read Blank DVDs but movie and data DVDs ok.

    I am at loss what to do. Whenever I put in DVD with media in it (including +R), it plays and reads it all just fine. CD data reads no problem too. However, when I put in a Blank DVD, it chugs and ejects it out completely.
    Preferences are fine. It says 'Ask What to Do' is set when 'You insert a Blank DVD'
    Here was how it started. Previously, I could put in a blank DVD and it would be just fine but I'm having problems burning after the 10.5.6 update. Read in a post somewhere to try resetting your PRAM which I did and now it won't accept the blank DVDs. Everything else is fine.
    I know a lot may say it's a bad batch, but I bought a new batch, Memorex vs. Verbatim and nothing.
    Would really appreciate ANY help I can get!
    Hardware Overview:
    Model Name: MacBook Pro 17"
    Model Identifier: MacBookPro2,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.33 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 4 MB
    Memory: 4 GB
    Bus Speed: 667 MHz
    Boot ROM Version: MBP21.00A5.B08
    SMC Version: 1.14f5
    Serial Number: W86*
    Sudden Motion Sensor:
    State: Enabled
    MATSHITA DVD-R UJ-85J:
    Firmware Revision: FAV1
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipping Drive)
    Cache: 2048 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -RW, +R, +R DL, +RW
    Write Strategies: CD-TAO, CD-SAO, DVD-DAO
    Media: Insert media and refresh to show available burn speeds
    < Edited by Host >

    Repairing permissions yes. But in my head, if everything is working fine for it, just won't read Blank media, could it be a software thing?
    I'll give it a shot in a few hours

  • My Mac Mini will not read TDK disks from my iMac G3.

    My Mac Mini will not read TDK disks from my iMac G3.
    I used an iMac G3 (2001) -- the ones that looked like a big pod -- running on OS X and saved files to TDK  CD-R, 700 MB disks, which worked fine. Now that I have a Mac Mini (model number  A1347) I cannot get this computer to read those disks, made on the iMac G3.  Once inserted each disk will open and I can retrieve files for a short period, then the problems start. The computer makes some noises, the beach-ball/pinwheel goes around and I cannot get the files to open or the disk to eject. After a while the disk does eject -- to my relief. I keep using Control+E until ejection happens.
    My Mac Mini (2010-2011) is hooked up to a View Sonic HDMI LED monitor, an iOmega external hard-drive for backing up, an Epson Stylus C88 Plus printer and to the internet by a fibre 10MB feed. The Mac Mini runs on OS X version 10.6.8 Snow Leopard: Processor Speed:2.66 GHz
    I took the Mac Mini to an Apple retailer and he hooked the computer up to one of his monitors and it read the TDK disks just fine. I am now using Sony CD-RW, 700 MB disks, but I would prefer to use my TDKs because I have such a large pile of blank ones to use and there are those TDK disks with information that I want to look at from time to time. Can anyone tell me what to do?
    DJG

    Try disconnecting everything attached to the Mini except the monitor.
    If that doesn't work, try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later. If successful, copy the files to the original account Public/Dropbox.
    Isolating an issue by using another user account
    If the problem is still there, try booting into the Safe Mode using your normal account.  Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
    Safe Mode - About
                    Safe Mode

  • DVD Drive will not recognize any movie DVD disk in the drive - thus will not play any dvd movies.

    HP G71 449WV dvd drive will not recognize any dvd disc that has a movie on it. Will not play movies, keeps saying to insert disc when there is a disc in there.  It will recognize a dvd data disc or a blank dvd, it just will not recognize any dvd movies.  I've tried the microsoft fix it, downloaded new codecs, using different dvd playback software but none of that works since the drive will not recognize there is even a dvd movie in the drive.  Computer is out of warranty.

    Hello crollinsphoto1, welcome to the HP Forums.
    It appears that you're not able to play movie DVD's in the DVD player in your notebook. I will try to assist you with this.
    I'd recommend starting with this document:
        Resolving DVD and Blu-ray Movie Problems (Windows 7).
    Also, are these purchased DVD's or burnt DVD's?  
    Do the movies play in other sources? (DVD player, other PC)
    Let me know how this goes.
    Thanks.
    I worked on behalf of HP.

  • My CD/DVD drive will not open

    My CD/DVD drive will not open when I insert any type CD/DVD. The CD/DVD just runs but will not open.

    Try cleaning the lens:
    Use a DVD lens cleaning disk.
    Use a few shots of compressed air in the slot.
    Wrap a fine microfiber cloth (eyeglasses cleaning cloth?) around a business card and gently insert it in the slot.
    If no success, a trip to the genius bar at an Apple store is the best option.
    Ciao.

  • My imac dvd drive is not working

    my imac dvd drive is not working anytime I put a cd or dvd in and it tries to load for like one mintue and then just ejects

    My superdrive has always been sensitive to dirt and smudges. Memorex and other mfgs make a DVD cleaner disk that has little bristles on the DVD to brush the dust away. Vacuuming the slot can also clean out dust buildup. Also there are disk polishers that can repair scratched CDs and DVD if they become unreadable.

  • DVDRAM will not read data disks

    I have a A215-S4697 with a HL-DT-ST GSA T20n DVDRAM.  The drive will read CD and DVD audio and video disks.  It will not read data disks.  The driver says it is a CD-ROM.  Is there a better driver I need?  Has anyone had the same problem and found a solution?
    Thanks 

    Cory K wrote:
    Is the file open in Excel, or is it open because your VI is writing data to it somewhere in your code?
    If the latter case is true, you can use a semaphore to ensure that a read and write operation are not trying to occur simultaneously.
    The file is open in Excel.

  • CD/ DVD Drive is not reading any discs! - HP Pavillion DV6747TX

    Hi there, I have a problem. My CD/ DVD Drive is not reading any discs! I have no idea what's happened..it was going fine and then all of the sudden it stopped working.
    The computer I have is a HP Pavillion DV6700 or DV6747TX to be exact and the CD/DVD-Rom drive is a TSSTcgrp CDDVDW TS%L632N ATA Device. It seems to be present in the Device Manager and in the Computer Menu. When I put a CD or DVD into the disc drive lights are blinking and it sounds like it's trying to load or do something, but nothing is coming up. CD Drive E still says CD Drive E instead of reading the disc that's in there and when I click on Drive E it says Windows cannot read the disc in drive E.
    I have tried searching the net for answers including the suggestions on this website and have tried a few other ideas I have come across but nothing seems to be working. Any help would be greatly appreciated  

    This is usually  a known software conflict and happens across the board will all computer manufacturers due to a issue with multiple media burning/ripping applications being installed on your system.
    You can either run this file, go online to Microsoft's site for a fix, or manually fix it by following the instructions below:
    Manually delete the registry entries
    Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:
    322756  (http://support.microsoft.com/kb/322756/ ) How to back up and restore the registry in Windows
    Note Before you use this method, uninstall all CD or DVD writing or recording programs. Deleting the corrupted registry entries might cause problems with any other CD or DVD writing or recording programs that are installed on your computer. Uninstalling these programs before you start will help you avoid any problems that removing the registry entries might cause. You can reinstall these programs after the problem is resolved.
    This method provides step-by-step instructions for how to use Registry Editor to delete the following corrupted Registry entries:
    UpperFilters
    LowerFilters
    Step 1: Start Registry EditorStart Registry Editor
    Start Registry Editor...type "regedit" into the run box on the start menu.
    Step 2: Delete the UpperFilters registry entry
    In Registry Editor, expand My Computer, and then expand HKEY_LOCAL_MACHINE.
    Expand SYSTEM, and then expand CurrentControlSet.
    Expand Control, and then expand Class.
    Under Class, click {4D36E965-E325-11CE-BFC1-08002BE10318}.
    In the details pane of Registry Editor, on the right side, click UpperFilters.
    Note You may also see an UpperFilters.bak registry entry. You do not have to remove that entry. Click UpperFilters only.
    If you see the UpperFilters registry entry in the details pane of Registry Editor, go to step 6.
    If you do not see the UpperFilters registry entry, you still might have to remove the LowerFilters registry entry. To do this, go to "Step 3: Delete the LowerFilters registry entry."
    On the Edit menu, click Delete.
    Click Yes when you receive the following message:Are you sure you want to delete this value?
    Step 3: Delete the LowerFilters registry entry
    In the details pane of Registry Editor, on the right side, click LowerFilters.
    Note You might see a LowerFilters.bak registry entry. You do not have to remove that entry. Click LowerFilters only.
    If you do not see the LowerFilters registry entry, unfortunately this content is unable to help you any more. Go to the "Next Steps" section for information about how you can find more solutions or more help on the Microsoft Web site.
    On the Edit menu, click Delete.
    Click Yes when you receive the following message:Are you sure you want to delete this value?The LowerFilters registry entry is removed.
    Exit Registry Editor.
    Step 4: Restart your computer
    Restart your computer. After you have done this, try to access the CD or DVD drive. If you can access the CD or DVD drive, and if you do not receive an error message, the problem is resolved. You can reinstall your CD or DVD writing or recording software.

  • CD/DVD Drive Will Not Open

    CD/DVD Drive Will Not Open

    Thank you.  I did find the problem - i'm running Windows 7 through Parallels and i need to Diconnect th CD drive within Windows to let the keyboard eject button work properly.

  • Tecra M5: DVD drive does not read these mini DVDs

    I have canon dvd handycam, and mini dvd works on it. One month back i recorded movie and pictures on mini dvd using handycam and ran mini dvd on my tecra M5 dvd drive, it worked very fine.
    Now after 1 month i have 5 mini dvds with movies and pictures which i took on 1 month vacation in diffierent countries, i tried my best but tecra dvd drive does not read these mini dvd, cd drive label appears instead dvd drive when i put mini dvd in it.
    All other standard size dvds, cds working fine on it.Its complicated and as well as irritating.
    Any suggestions?
    Why its messedup?

    Seems the lens cannot read this miniDVDs. Possibly the drive lens cannot calibrate and therefore the miniDVDs are nonreadable.
    Try the solution from sascha. Maybe youre a lucky man and it works.
    If not, try to remove the drive physically from the notebook. Reboot the notebook without the drive. The Windows and BIOS shouldnt recognize the drive.
    Then shuts down again, put the drive into the notebook and boot up the unit.
    The notebook should recognize the drive and should indicate the firmware again.
    Im not sure if this will help you but its attemptable

  • Satellite A40-151 DVD drive will not play DVDs

    hi my dvd drive will play music cd's but when i try to play a dvd it just makes a beep and nothing happens i tried windvd and it comes on but everything is blurred and still wont play a dvd

    Hello John
    Please dont be mad on me but in your posting there is no question or something just small report that DVD drive will not play DVDs.
    Anyway, if I am remembering well your unit is about 2 years old and has probably DVD-CDRW (Combo) drive. In my opinion there is no much to do. If the drive has problem with original DVDs I presume that there is laser calibrations problem and the device must be replaced.
    I dont know how old is your unit exactly but please check if the warranty is still valid. If yes contact service partner in your country immediately. The drive should be replaced for free. If not you must replaced it on your own. If the drive replacement costs too much I recommend you to use external device (I do it with my old Satellite). On this way I can use newest and very fast super multi DL devices and also create own DVDs.
    You can also try to find already used DVD/CD-RW drive and replace it alone. If you need assistance by replacement please write again.
    Once again, dont be mad on me. I am ready to write my opinion but it is really annoying when someone write just one sentence and nothing more.
    Good luck!

Maybe you are looking for