IMac early 2008 with OS X Lion 10.7.5 running slowly. How can I speed it up?

iMac early 2008 with OS X Lion 10.7.5 running slowly. How can I speed it up?

Hello, see how many of these you can answer...
See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
http://support.apple.com/kb/PH7029
Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
In the Memory tab of Activity Monitor, are there a lot of Pageouts?

Similar Messages

  • Problem description: My iMac (early 2008) with OS 10.10.2 runs slow.  I have run EtreCheck several times, and I am unable to move beyond Problem System Launch Agents (11 processes killed due to memory pressure) and Launch Daemons (12 processes killed

    Problem description:
    My iMac (early 2008) with OS 10.10.2 runs slow.  I have run EtreCheck several times, and I am unable to move beyond Problem System Launch Agents (11 processes killed due to memory pressure) and Launch Daemons (12 processes killed).
    EtreCheck version: 2.1.8 (121)
    Report generated April 14, 2015 at 9:50:48 AM EDT
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        iMac (24-inch, Early 2008) (Verified)
        iMac - model: iMac8,1
        1 3.06 GHz Intel Core 2 Duo CPU: 2-core
        4 GB RAM Upgradeable
            BANK 0/DIMM0
                2 GB DDR2 SDRAM 800 MHz ok
            BANK 1/DIMM1
                2 GB DDR2 SDRAM 800 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
        NVIDIA GeForce 8800 GS - VRAM: 512 MB
            iMac 1920 x 1200
    System Software: ℹ️
        OS X 10.10.2 (14C1510) - Time since boot: 4 days 20:29:22
    Disk Information: ℹ️
        Hitachi HDS721010KLA330 disk0 : (1 TB)
            EFI (disk0s1) <not mounted> : 210 MB
            Mac iBook HD (disk0s2) / : 999.35 GB (521.60 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
    USB Information: ℹ️
        Apple Inc. Built-in iSight
        Apple, Inc. Keyboard Hub
            Apple, Inc Apple Keyboard
        Apple Computer, Inc. IR Receiver
        Apple Inc. BRCM2046 Hub
            Apple Inc. Bluetooth USB Host Controller
    Configuration files: ℹ️
        /etc/sysctl.conf - Exists
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Problem System Launch Agents: ℹ️
        [killed]    com.apple.CallHistoryPluginHelper.plist
        [killed]    com.apple.CallHistorySyncHelper.plist
        [killed]    com.apple.coreservices.appleid.authentication.plist
        [killed]    com.apple.icloud.fmfd.plist
        [killed]    com.apple.Maps.pushdaemon.plist
        [killed]    com.apple.printtool.agent.plist
        [killed]    com.apple.SafariNotificationAgent.plist
        [killed]    com.apple.sbd.plist
        [killed]    com.apple.scopedbookmarkagent.xpc.plist
        [killed]    com.apple.telephonyutilities.callservicesd.plist
        [killed]    com.apple.warmd_agent.plist
        11 processes killed due to memory pressure
    Problem System Launch Daemons: ℹ️
        [killed]    com.apple.AssetCacheLocatorService.plist
        [killed]    com.apple.ctkd.plist
        [killed]    com.apple.emond.aslmanager.plist
        [killed]    com.apple.icloud.findmydeviced.plist
        [killed]    com.apple.ifdreader.plist
        [killed]    com.apple.nehelper.plist
        [killed]    com.apple.nesessionmanager.plist
        [killed]    com.apple.periodic-daily.plist
        [killed]    com.apple.periodic-weekly.plist
        [killed]    com.apple.softwareupdate_download_service.plist
        [killed]    com.apple.wdhelper.plist
        [killed]    org.cups.cupsd.plist
        12 processes killed due to memory pressure
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [running]    com.adobe.AdobeCreativeCloud.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.adobe.SwitchBoard.plist [Click for support]
        [running]    com.arubanetworks.via.NetworkMonitorLaunchd.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [running]    com.spotify.webhelper.plist [Click for support]
    User Login Items: ℹ️
        ChronoSyncBackgrounder    Application  (/Library/Application Support/ChronoSync/ChronoSyncBackgrounder.app)
        Dropbox    Application  (/Applications/Dropbox.app)
        Canon IJ Network Scanner Selector2    Application Hidden (/Library/Printers/Canon/IJScanner/Utilities/Canon IJ Network Scanner Selector2.app)
        Google Drive    Application  (/Applications/Google Drive.app)
    Internet Plug-ins: ℹ️
        Google Earth Web Plug-in: Version: 6.1 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [Click for support]
        Flip4Mac WMV Plugin: Version: 3.1.0.24   - SDK 10.8 [Click for support]
        OVSHelper: Version: 1.1 [Click for support]
        AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]
        AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
        DivX Web Player: Version: 3.2.4.1250 - SDK 10.6 [Click for support]
        FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        Flash Player: Version: 17.0.0.134 - SDK 10.6 Outdated! Update
        iPhotoPhotocast: Version: 7.0
        QuickTime Plugin: Version: 7.7.3
        SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
        AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
        Silverlight: Version: 5.1.20913.0 - SDK 10.6 [Click for support]
        JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
    User internet Plug-ins: ℹ️
        WebEx: Version: 1.0 [Click for support]
        Google Earth Web Plug-in: Version: 7.1 [Click for support]
    3rd Party Preference Panes: ℹ️
        Adobe Version Cue CS2  [Click for support]
        Flash Player  [Click for support]
        Flip4Mac WMV  [Click for support]
        VIA PrefPane  [Click for support]
    Time Machine: ℹ️
        Time Machine not configured!
    Top Processes by CPU: ℹ️
             3%    WindowServer
             3%    Mail
             2%    com.apple.iCloudHelper
             1%    Creative Cloud
             1%    Google Chrome
    Top Processes by Memory: ℹ️
        223 MB    Google Chrome
        150 MB    Finder
        129 MB    Google Chrome Helper
        112 MB    Mail
        69 MB    Google Drive
    Virtual Memory Information: ℹ️
        35 MB    Free RAM
        1.45 GB    Active RAM
        1.45 GB    Inactive RAM
        888 MB    Wired RAM
        27.01 GB    Page-ins
        851 MB    Page-outs

    When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • HT1379 I have  lost everything on my mac, a gray screen with a folder and question mark is blinking. i hav another mac that is running slowly, how can I boot and reinstall os x Lion, i do not have the start up disc with me.

    I have  lost everything on my mac, a gray screen with a folder and question mark is blinking. i hav another mac that is running slowly, how can I boot and reinstall os x Lion, i do not have the start up disc with me.

    Welcome to the Apple Support Communities
    Lion uses Recovery to reinstall OS X. Press Command and R keys when your Mac starts, open Disk Utility, erase the drive and reinstall Lion. The other Mac has probably got its hard disk damaged, so take the Mac to an Apple Store

  • Hi, I have a iMac Tiger running slowly, how can I make it run faster?

    Hi, I have a iMac Tiger 10.4.11 running slowly, how can I make it run faster?

    Look at what is happenning with your Mac when you run Activity Monitor.
    Macintosh-HD -> Applications -> Utilities -> Activity Monitor
    Click on the CPU tab on the lower half of the window to see how much time you are using. 
    Click on System Memory to get statistics on memory usage.  You should have some free memory. 
    When you have lots of page outs more memory will be helpful.  My entry for entry for Page ins/outs is:
    Page ins/outs: 29163/0
    Notice I have 0 pageouts which says that I am not using my harddrive for extra memory space.  Thus, I have enough memory.
    Activity Monitor has a neat feature where it can display a dynamic dock icon.  In Activity Monitor View > Dock icon > Show cpu history.
    "Reading system memory usage in Activity Monitor :"
    http://docs.info.apple.com/article.html?artnum=107918
    <a href="http://developer.apple.com/documentation/Performance/Conceptual/ManagingMemory/A rticles/AboutMemory.html#//apple_ref/doc/uid/20001880"
    >Managing Memory</a>
    See   Kappy 
    http://discussions.apple.com/message.jspa?messageID=8025223#8025223
    Problems from insufficient RAM and free hard disk space
    http://thexlab.com/faqs/lackofram.html

  • Does any one experience having slow performance after upgrading to lion? (I'm using an iMac early 2008 with 4gb memory)

    I'm having a problem on my iMac early 2008 (2.4GHz Core 2 Duo 4gb SDRAM) after upgrading to Mac OS X Lion.
    The animation such as mission control and full screen and especially, launch pad performs really slow.
    Sometimes, mission control doesn't even show the animation.
    This is terrible and I want Apple to fix these problems or otherwise this is just making my mac useless.
    Does anyone experience having similar problem?

    thanks for the reply!
    I've checked the activity monitor but nothing was taking up the space expect for Flash Player (Safari Internet plug-in, which takes up 29% of CPU)
    here's my screenshot. can you see any problems?
    and here's another

  • My imac is running slow how can i speed it up to where it was

    my intel based imac is getting increasingly slower and that spinning color wheel shows up all the time when using the computer for just about anything.
    additionally, i use mac's email program and its acting flaky, asking ror the password multiple times a week.

    1. How much RAM does it have and how full is your Hard Drive?
    2. Test your Hard Drive. > Intel-based Macs: Using Apple Hardware Test

  • Adding ssd to an iMac early 2008

    I have an iMac early 2008 with a hd by sata. I have also SuperDrive by pata/IDE. If I change the hd by a ssd by sata and a 1 tb hd by pata, I will increase the speed of my iMac? Another option is to install osx on a ext. FireWire 800 ssd with a box, which is the best option?

    Adding the SSD for a boot/application volume will dramatically increase the speed of booting and application launching. Retrieving data from the pata hard drive will be slower than the existing SATA interface that your hard drive is on now. I don't know if that's enough of a speed hot to actually notice. The SSD will make the computer feel MUCH faster, I put one in my MacBook and it feels like a completely different machine, it's the single best upgrade I've ever done.
    I don't know how much an SSD in an external FireWire enclosure will speed thins up but I'm considering the same thing as I don't want to open my iMac and risk messing something up.

  • I have iMac early 2008 2.8 Ghz with ox10.9.1 safari keeps shouding down can I deleted  it and installed a new safari?

    have iMac early 2008 2.8 Ghz with ox10.9.1 safari keeps shouding down can I deleted  it and installed a new safari?

    The Safari version you need is 7.0.1.   What version shows in About Safari?

  • I have an older iMac (early 2008) that eats all my bandwidth when i turn it on. I don't know what's running. is there a fix?

    I have an iMac (early 2008) 2.4ghz, Intel Core 2 Duo, 4GB ram, 250GB hdd, OS X 10.9.4. About 8 months ago, we got a call from our Internet provider (Cox) telling us we were were eating up about 250GB of bandwidth a month, and they were going to start charging us extra for it. I monitored it for a few days and found that as soon as i turned on the Mac, it started eating up bandwidth. Took it to the Genius bar, but they were clueless.
    I just bought a refurb iMac (late 2009) 2.66ghz, Intel Core i5, 8 GB ram, 1TB hdd, OS X 10.9.4. Should I transfer all my files over to this new one from the old iMac, or should I try to get the problem fixed before the transfer. Also, I'm hoping to salvage the old iMac, and let my wife use it once I've got it fixed.

    Most often BitTorrent, iCloud, Dropbox, or some other cloud-data application is involved in cases of mysterious bandwidth use by a Mac. If you use iCloud, uncheck at least Photo Stream and Documents & Data in its preference pane and see whether there's any change. If you use third-party network backup or file-sync software, disable that. If you use a torrent client, remove it.
    Otherwise, if you're running OS X 10.9 or later, you can see which processes are most active on the network.
    Launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
    Select All Processes from the View menu, if not already selected, and also select the Network tab.
    Click the heading of the Sent Bytes column in the process table to sort the entries by bandwidth usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Repeat with the Rcvd Bytes column.

  • IMac Early 2008 - Spinning Wheel constantly also in Safe Mode

    Hello Apple Support community!
    Recently I've been having much trouble with my iMac Early 2008. In the last 5 years I have never had an issue with it until about 4 days ago and I have no idea how this problem came about.
    I have 10.8.5 installed and know a bit about OS X.
    Problem Description:  On a recent Dropbox sync where there appeared to be a folder conflict the computer hung and was unresponsive. I had to hard shut down by using the power button. Every successive boot (and attempt for DB to sync) ended in a hang and the spinning wheel. I booted into Safemode, disabled Dropbox as a startup item, rebooted and everything worked for a few hours. Because I needed files from DB i decided to download the update and install. This added DB to the startup items again and history repeated itself. Spinning wheel on startup and a hard shut down again. This time safe mode couldn't save me. I was also getting the spinning wheel there too. I left it for a few days until today when I finally hads the time to troubleshoot.
    From my iPad I unlinked the iMac from dropbox and booted it from the install disk to perform a hardward test. The standard test showed no errors so I rebooted. I immediately wanted to do a time machine backup and after 6GB were transferred, Time Machine stalled.  The spinning wheel was back and I had to hard reset. So I started in safe mode and waited for Time Machine to do its thing. It began cleaning up and then managed only about 140MB before hanging.
    Next I started the iMac in Firewire target disk mode and tried to transfer the files to my 15" Powerbook (OS 10.4.11) After only 700MB the Firewire logo on the iMac screen stopped moving and the file transfer stalled. I did a hard shut down again.
    This time I ran OS 10.5.4 from the install disk and opened disk utility > verify disk to check for errors. None were found so I rebooted into SAFE MODE and wanted to run terminal to clear dyld cache.  Since Finder is unusually sluggish and it seems any mouse-clicking causes the spinning wheel, I waited a bit and then hit command-space to bring up Spotlight into order to launch Terminal. There the iMac hung yet again, but quite strange is that the spotlight search window came up with the description about indexing taking a long time etc etc. I only know that the first time an HD has to be indexed and since this computer is quite old I find that curious.
    A.t.m. I am running the extended hardware test from install disk and looking for suggestions about how I can reliably get my data off the HD in order to do a clean install, if I have to. Alternative suggestions to avoid that would be welcome, but I understand that this may be the only solution, if not also having to buy and install a new HD first.
    thanks for your help in advance.
    best regards,
    Dan

    AHT extended version reports the following error
    4HDD/11/40000000:SATA(0,0)
    Google results show only people with SSD drives reporting that. Cause could be a loose cable??
    two weeks ago I moved and had to pack the iMac in the original box. However I transported this myself and not the movers.

  • IMac early 2008 running slow after installation of Yosemite

    I have been having problems with my iMac (early 2008).  I ran a diagnosis check (Etresoft).  I don't understand them so any help is welcome....
    Problem description:
    iMac early 20089 running slow since installation of Yosemite
    EtreCheck version: 2.1.1 (104)
    Report generated December 7, 2014 at 11:13:12 AM CST
    Hardware Information: ℹ️
      iMac (20-inch, Early 2008) (Verified)
      iMac - model: iMac8,1
      1 2.4 GHz Intel Core 2 Duo CPU: 2-core
      3 GB RAM Upgradeable
      BANK 0/DIMM0
      1 GB DDR2 SDRAM 800 MHz ok
      BANK 1/DIMM1
      2 GB DDR2 SDRAM 800 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      ATI Radeon HD 2400 - VRAM: 128 MB
      iMac 1680 x 1050
    System Software: ℹ️
      OS X 10.10.1 (14B25) - Uptime: 2 days 3:48:58
    Disk Information: ℹ️
      Hitachi HDP725025GLA380 disk0 : (250.06 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Macintosh HD (disk0s2) / : 249.20 GB (162.83 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
    USB Information: ℹ️
      Apple Inc. Built-in iSight
      Apple, Inc. Keyboard Hub
      Apple, Inc Apple Keyboard
      Apple Computer, Inc. IR Receiver
      Apple Inc. BRCM2046 Hub
      Apple Inc. Bluetooth USB Host Controller
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Startup Items: ℹ️
      HP IO: Path: /Library/StartupItems/HP IO
      Startup items are obsolete in OS X Yosemite
    Problem System Launch Agents: ℹ️
      [failed] com.apple.CallHistoryPluginHelper.plist
      [failed] com.apple.CallHistorySyncHelper.plist
      [failed] com.apple.cmfsyncagent.plist [Details]
      [failed] com.apple.Maps.pushdaemon.plist
      [failed] com.apple.printtool.agent.plist
      [failed] com.apple.sbd.plist
      [failed] com.apple.scopedbookmarkagent.xpc.plist
      [failed] com.apple.telephonyutilities.callservicesd.plist
      [failed] com.apple.warmd_agent.plist
    Problem System Launch Daemons: ℹ️
      [failed] com.apple.AssetCacheLocatorService.plist [Details]
      [failed] com.apple.awdd.plist
      [failed] com.apple.ctkd.plist
      [failed] com.apple.hdiejectd.plist [Details]
      [failed] com.apple.ifdreader.plist
      [failed] com.apple.installd.plist [Details]
      [failed] com.apple.nehelper.plist
      [failed] com.apple.periodic-daily.plist [Details]
      [failed] com.apple.softwareupdate_download_service.plist [Details]
      [failed] com.apple.softwareupdated.plist [Details]
      [failed] com.apple.wdhelper.plist
    Launch Agents: ℹ️
      [loaded] com.google.keystone.agent.plist [Support]
      [loaded] com.hp.help.tocgenerator.plist [Support]
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist [Support]
      [loaded] com.google.keystone.daemon.plist [Support]
    User Login Items: ℹ️
      iTunesHelper UNKNOWNHidden (missing value)
      Skype UNKNOWN (missing value)
      Software Update Application (/System/Library/CoreServices/Software Update.app)
      EvernoteHelper UNKNOWN (missing value)
      Dropbox UNKNOWN (missing value)
      Dropbox Application (/Applications/Dropbox.app)
      Messages Application (/Applications/Messages.app)
      HP Scheduler Application (/Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app)
      HPEventHandler UNKNOWN (missing value)
    Internet Plug-ins: ℹ️
      o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
      Google Earth Web Plug-in: Version: 6.0 [Support]
      Default Browser: Version: 600 - SDK 10.10
      Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 [Support]
      OfficeLiveBrowserPlugin: Version: 12.3.6 [Support]
      RealPlayer Plugin: Version: Unknown [Support]
      Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Support]
      FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 [Support]
      Flash Player: Version: 15.0.0.239 - SDK 10.6 [Support]
      iPhotoPhotocast: Version: 7.0 - SDK 10.8
      googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
      QuickTime Plugin: Version: 7.7.3
      Photo Center Plugin: Version: Photo Center Plugin 1.1.2.2 [Support]
      CouponPrinter-FireFox_v2: Version: Version 1.1.6 [Support]
      JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
    User internet Plug-ins: ℹ️
      Move_Media_Player: Version: npmnqmp 071706000001 [Support]
      Google Earth Web Plug-in: Version: 7.1 [Support]
    Safari Extensions: ℹ️
      AdBlock
      Translate
      zoomintosafari
      Shortly
      Pin It Button
    3rd Party Preference Panes: ℹ️
      Flash Player  [Support]
      Flip4Mac WMV  [Support]
      Perian  [Support]
    Time Machine: ℹ️
      Skip System Files: NO
      Auto backup: YES
      Volumes being backed up:
      Macintosh HD: Disk size: 249.20 GB Disk used: 86.37 GB
      Destinations:
      Time Machine Backups [Local]
      Total size: 499.76 GB
      Total number of backups: 191
      Oldest backup: 2008-11-28 18:33:25 +0000
      Last backup: 2014-11-21 14:59:34 +0000
      Size of backup disk: Adequate
      Backup size 499.76 GB > (Disk used 86.37 GB X 3)
    Top Processes by CPU: ℹ️
          2% WindowServer
          0% AppleSpell
          0% ps
          0% syslogd
          0% fontd
    Top Processes by Memory: ℹ️
      815 MB com.apple.SpeechRecognitionCore.speechrecognitiond
      200 MB Safari
      120 MB com.apple.WebKit.WebContent
      45 MB mds_stores
      32 MB Finder
    Virtual Memory Information: ℹ️
      32 MB Free RAM
      1.22 GB Active RAM
      1.21 GB Inactive RAM
      422 MB Wired RAM
      14.67 GB Page-ins
      114 MB Page-outs
    Diagnostics Information: ℹ️
      Dec 5, 2014, 07:24:48 AM Self test - passed

    Please describe the problem in as much relevant detail as possible. The "etrecheck" fad hasn't made that step any less necessary. The usual results of posting etrecheck output on this site without a full description of the problem are very poor. The better your description, the better the chance of a solution.
    For example, if the computer is slow, which specific actions are slow? Is it slow all the time, or only sometimes? What other changes did you make, if any, just before it became slow? Have you seen any alerts or error messages? Have you done anything to try to fix it? Most importantly, do you have a current backup of all data? If the answer to the last question is "no," back up now. Ask if you need guidance. Do nothing else until you have a backup.

  • Have an iMac Early 2008 + Windows 7 and no sound from speaker out? SOLVED!!

    Hello everyone,
    So I'm pleased to say after over a month of trying to solve this annoying problem, it's been solved! Basically, if you have an iMac, Early 2008 edition (8,1) and Windows 7 and notice that the default microsoft driver gives very low sound and the new realtek drivers only give sound through the internal speakers... then this solution is for you!
    What you'll need:
    7-zip (www.7-zip.com)
    Mac OS X 10.5 Leopard Disc 1 (NOT Snow Leopard!)
    Here's what you'll need to do, step by step:
    1) Uninstall the Realtek Driver (latest version currently 2.37) by going to Control Panel / Programs / Uninstall Programs.
    2) Reboot. Upon reboot, the system will automatically reinstall the default Microsoft drivers. You can check this in Device Manager (control panel / system / device manager).
    3) Insert the original Leopard Disc 1 that came with your iMac (very important, as this is the only driver I know for sure will work). Point windows explorer to the folder: D:\Boot Camp\Drivers (assuming d: is your cd-rom drive).
    4) Copy the "RealTekSetup.exe" file somewhere on your desktop. Do NOT install it!
    5) Decompress "RealTekSetup.exe" by right clicking the file and choosing "7-zip decompress". Again, you'll need to make sure you installed 7-zip from 7zip.com prior to doing this.
    6) Go to your Device Manager again, right click the sound device (which should be something like High Definition Audio) and choose "Update Device Software".
    7) Select "Browse my computer for driver software" and direct it to the folder that you extracted the drivers to.
    8) You now have sound through your EXTERNAL SPEAKERS!
    This works because there is a bug that RealTek/Apple does not seem to want to fix where the newer version of the RealTek control panel detects the speaker out as line in and the line in as nothing! This forces drivers normally made for Vista or Vista64 to install on Windows 7, which work 100% great.
    I promise you, if you have an Early 2008 iMac, this WILL fix your problem if you follow each step! Let me know if you have any questions!
    Brad Levicoff

    If you don't have any Leopard disk then just google for "Vista_R199.exe".
    This driver works nice on Early 2008 IMAC. I also tried an earlier version, Vista_R182.exe but there sometimes was a horrible background noise which made listening to music impossible.
    Just download and follow the instructions above in the first post.
    Have fun.
    Uska
    Message was edited by: Uska

  • Which new inkjet printer for my iMac early 2008?

    I need a new inkjet printer for my iMac early 2008 (until now I use an old Epson Stylus Photo 1200 which now is going to its end of life).
    Which printer would you choose, especially for photo prints?
    Thanks for your answers! :-)

    I should have mentioned that I may have the same computer you have  - a late (December) 2007 iMac.  I continue to run 10.4.11 Tiger because of some antiquated software I use that is not compatible with later operating systems.  An additional thing I like about the Canon is its five individual ink tanks.  When one color runs out, I just change out that one cartridge and keep going.

  • Problem reinstalling Mac 10.6.8 on iMac early 2008, 2 meg memory.

    Have iMac early 2008 2meg memory.  Upgraded from 10.5.8 to 10.6 then to 10.6.8 but computer ran slow and froze so tried to reinstall OS 10.6 with disc.  Used disc utility to check hard drive and it was ok.  Tried twice to install 10.6 from install disc, but both times failed due to errors.  Existing system 10.6.8 is corrupt so need to reinstall 10.6 then upgrade to 10.6.8 .  I don't want to erase disc as have some apps e.g. CS5, which I don't want to erase.  I also would prefer not having to back up disc apps and then reformat disc.   Any suggestions?  Guess I could make boot drive, erase hard drive OS 10.6.8, and then install new copy.  Had major issues with 10.6.8 running slow and freezing. Could that be 2 meg memory?  Have more memory coming in mail and will upgrade to 4 meg.  Can you run more than the apple recommended 4 meg on this machine?  Thanks for help.  Sorry for the lengthly post.....  

    To do what you want requires erasing the disk first. There is no way around this.
    Clean Install of Snow Leopard
    Be sure to make a backup first because the following procedure will erase
    the drive and everything on it.
         1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
             with your computer.  Insert the disc into the optical drive and restart the computer.
             After the chime press and hold down the  "C" key.  Release the key when you see
             a small spinning gear appear below the dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, click on Options button
             and select GUID, click on OK, then set the format type to MacOS Extended
             (Journaled, if supported), then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. Be sure you configure your initial admin account with the exact same
             username and password that you used on your old drive. After you finish Setup
             Assistant will complete the installation after which you will be running a fresh
             install of OS X.  You can now begin the update process by opening Software
             Update and installing all recommended updates to bring your installation current.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • IMac early 2008 screen not working properly, lots of lines on screen, re appearing and disappearing at random(normally slowly), computer fine on external screen, any suggestions?

    This seemed to happen very suddenly; I left my iMac running while i went out and came in to find that the screen was totally unusable, as you will be able to see from the picture it has a lot of lines that seem to come and go a random and sometimes it goes black all together. What do you think is wrong with it? Logic board? Graphics card? Screen itself?.. also if it is the graphics card, is it separate to the logic board or do both need to be replaced?
    Also some additional info:
    iMac Early 2008
    2.4ghz
    4gb Ram
    OSX 10.9.2
    ATI Radion HD 2400
    Actual computer working on external monitor, just not internal
    Thanks

    Costs vary by area, I think you may find out though that spending money on a 6+ year computer may not be worth it, you can buy an Apple Refurbished Mac with much more up-to-date specifications and save hundreds of $s. If this is of interest you can only find them on Apple's on-line store, in the US the current link is:
    http://store.apple.com/us/browse/home/specialdeals
    Then click the link to the iMacs. If you don't find one you want, continue looking the inventories change frequently, sometimes by the hour.

Maybe you are looking for