IMac external Hi-Fi buzzing! How do I stop this!?

I have a late 2008 iMac and have connected my external Hi-Fi to it using a standard 3.5mm cable. After about 30 seconds of no sound being outputted the sound card appears to go to sleep and my Hi-Fi begins a horrible buzz! How do I stop this!?
Please note that I have tried both Antipop and SoundStay and neither seem to have made any difference what so ever...
Help?!

Ahh, thanks for the note . Just before I go and splash money on this not knowing wether it will work or not, I know for a fact that if I press volume up or down (basically make it make some noise) then the sound card comes back to life and the buzz disappears entirely! if then there is another idle period of 30 the buzz will come back, Are there any ways of keeping the sound card "alive" like keep a silent tone playing?

Similar Messages

  • I have all my music on my external hard drive when I try to add it to iTunes it is automatically added to my MacBook Pro's hard drive. How do I stop this from happening? I just want the music to stay on the external hard drive. Thanks!

    I have all my music on my external hard drive when I try to add it to iTunes it is automatically added to my MacBook Pro's hard drive. How do I stop this from happening? I just want the music to stay on the external hard drive. Thanks!

    This is true of course, but doesn't cover the situation where some files are in the iTunes Media folder and others are on an external drive. In my case I keep my music in the Media folder and all my films on an external drive (there are too many to have on the internal drive). In iTunes 11, and before, it was easy to add those external files by holding down the alt/opt key while dragging to the sidebar. In iTunes 12 this is no longer possible. There are several workarounds: use TuneSpan to move the file after it's been added; delete the file from the Media folder and empty the trash then use iTunes Get Info which will report the file is missing and allow you to locate it; constantly switch the Add to iTunes toggle on and off as required. All of these require a lot more work than just holding down the alt/opt key while adding.
    It constantly gets harder.

  • Since I upgraded to 10.9.5, my macbook no longer recognizes my external  hard drive. How do I fix this?  External hard drive is a 1TB Toshiba formatted for mac.  Worked fine until latest upgrade.

    Since I upgraded to 10.9.5, my macbook no longer recognizes my external  hard drive. How do I fix this?  External hard drive is a 1TB Toshiba formatted for mac.  Worked fine until latest upgrade.

    Solved the problem by dumping my external HD onto another computer. Re-formatting and re-installing the data.  Not what I wanted to do but it solved the problem.

  • Have over 86GB of music now showing as "other" and although it is still on my iPod it is not playable.  Most is from imported CDs. I do have a backup file on an external hard drive. How can I fix this?

    Have over 86GB of music now showing as "other" and although it is still on my iPod it is not playable.  Most is from imported CDs. I do have a backup file on an external hard drive. How can I fix this?

    To import music into your iTunes library on the computer go to iTunes>Help>iTunes Help>Add items to iTunes and follow the instructions
    Delete the "songs" that do not play in your iTunes library and reimport them.

  • I have one folder on my desktop, i want to copy it on external hard drive so how can i do this?

    I have one folder on my desktop, i want to copy it on external hard drive so how can i do this?

    Welcome to Apple Support Communities
    Connect the external drive and open a Finder window pressing the Finder icon in Dock. Then, drag the folder to Finder, so it will be copied to this external disk.
    If you can't copy this folder, probably you have to format the external disk or use an app that allows you to write in that external drive. Mac OS X can't write in NTFS external disks

  • IMovie events and projects on external HD but optimizes every time, how do I stop this?

    iMovie 11 v 9.0.9 I have the events and clips on an external HD and every time I start iMovie it "optizimizes" then "processing Events".  How do I stop this repetitive and long process?

    It might be worth trying a complete uninstall/reinstall of iTunes and related componentry, as per the following troubleshooting document:
    Removing and Reinstalling iTunes and other software components for Windows XP

  • I am trying to back up my iPad via a external hard drive.  how do i do this with my cloud being full

    I am trying to back up my iPad via an external hard drive.  How do i do this?  My cloud is full>

    Are you trying to backup to an external HD connected to your computer, or a wireless HD interfaced to an iPad?
    Mac - How to Move the iPhone & iPad iTunes Backup folder to an External Hard Drive
    http://osxdaily.com/2011/03/05/how-to-move-the-iphoneipad-itunes-backup-folder-t o-an-external-hard-drive/
    How to Change the Location of Your iPhone Backup (Mac)
    http://ismashphone.com/2012/05/how-to-change-the-location-of-your-iphone-backup. html
    Windows - Change iPad default backup location
    http://apple-ipad-tablet-help.blogspot.com/2010/07/change-ipad-default-backup-lo cation.html
    Windows - Changing IPhone and iPad backup location
    http://goodstuff2share.wordpress.com/2011/05/22/changing-iphone-and-ipad-backup- location/
     Cheers, Tom

  • Gratuitous kernel panic on my iMac G3 running Tiger. How can I prevent this

    Ok, I know I probably shouldn't have installed Tiger on my G3 iMac so you don't need to remind me. However, it runs pretty good and I hardly ever even see the beachball spinning when I ask it to do something. What I am shocked, shocked by is the ridiculous amount of frequency that I end up with a kernel panic that gives me the 'gray screen' telling me I have to restart my Mac. I have been able to keep this down to a minimum by pointedly only running programs and commands one at a time with a good sized pause in between but even with that I am diappointed with how often it happens. Call me a heretic, but I think it would have killed Apple to stick with their classic OS framework rather than go to UNIX. I would like some tips about things I could do to minimize this occurence above what I already do. It really ***** to have had to reinstall Tiger about 3 or 4 times since I upgraded and have to change up the screen position, dock, desktop, mouse, screen saver, and reinstall all my programs after my iMac has croaked and finally accepted another reload of Tiger.

    I'll ignore the major portion of your post which comes across as a rant and try to stick with the title: "kernel panic on my iMac G3 running Tiger. How can I prevent this?"
    Kernel panics are usually caused by bad or marginal RAM or RAM that isn't seated properly, or by buggy or damaged software or drivers. In the past, problems with marginal RAM for Macs has shown up when people upgraded to new versions of the OS -- which might fit your situation.
    Although your CPU is slow, you have lots of RAM, so Tiger should run OK, if the RAM is not defective. You don't mention how much free space you have on your hard drive. Typically you're going to need at least 5 Gig free to give Tiger breathing room.
    Running a system maintenance utility like Yasu would probably also be beneficial:
    http://jimmitchell.org/projects/yasu/
    What does the hardware test for your Mac say about your system? This might help us determine if there is a hardware cause for the kernel panics.

  • I use iPhone 5s and iPad Air to take photos. They download automatically to my iMac. However, I often get dups, triplicates or more on the iMac. How can I stop this and how can I get rid of the extras that are already there?

    I use iPhone 5s and iPad Air to take photos. They download automatically to my iMac. However, I often get dups, triplicates or more on the iMac. How can I stop this and how can I get rid of the extras that are already there?

    Try upgrading your Mac to the newest version of OS X Mavericks, and try upgrading your iPhone and iPad to the newest version of iOS 7.
    OS X Mavericks may not be in the Mac App Store by now, but you can find the newest version of Mavericks here at download.com: http://download.cnet.com/Apple-Mac-OS-X-Mavericks/3000-18513_4-76018588.html. Note: Download.com it a safe website to download free software.

  • My iphone buzzes every 10 seconds while charging. How can I stop this please?

    I there
    Appreciate your help ...
    My iphone buzzes continuously while charging. How can I stop this please

    I wish mine would sync.  I have iCloud and want to be able to move from device to device and see all my message threads but when people send an imessage to my iphone the thread will not appear on my other devices - ipad or Mac.  Frustrating...

  • For some reason, When I add my 'My Music' folder to Itunes on my new computer, as Itunes is adding music, It's creating hundreds of playlists from each of my artist/albums...I end up with a ton of playlists (200 gigs worth) How do i stop this?

    Essentially, Itunes creates a playlist for each album in my 'my music' folder, resulting in thousands of playlists. Why is this happening all of the sudden? How do I stop this?
    Thanks,
    Brendan

    hi Limnos,
    I do not mean the entire ITunes folder but, rather, the contents of the ITunes folder prior to September 29th.  (90% of the media is missing, along with all playlists)  The media that remains says it was added on 9/29 although I know most of it was added many months or even years earlier. There are no playlists listed at all, before or after 9/29.  (I know for certain that I added non-iTunes purchased songs on 10/6 although I had not created playlists for them)
    I have my iTunes folder backed up on both an external drive as well as Time Machine.
    I run iTunes off of an ITunes folder on my computer rather than from the external, if that's what you mean about how I have it set up. 
    Is it OK to drag the entire iTunes folder from the external drive onto my laptop's drive and see if that fixes it?
    Thank you for your help!
    Deb

  • In Yosemite, pasted objects in Photoshop Elements 12 automatically snap to the center of a new window. How do I stop this from happening?

    I installed Yosemite yesterday. Now, when I paste an image into a new window to combine it with another image, the layer or layers automatically snap back to the center of the new window. How do I stop this from happening?

    Thanks, Barbara. I don't use a trackpad on my iMac, just a mouse. However, I DID discover yesterday that if I press COMMAND-T (the command to Free Transform an image) I can then move the image where I want in the window. I need to use the command every time I move the image, which is annoying--in Mavericks, that Free Transform command was somehow the default.

  • Help! My Mouse pad is not working properly. The arrow cannot be controlled, it just keeps jumping all over the page. How can I stop this?

    Help! My Mouse pad is not working properly. The arrow cannot be controlled, it just keeps jumping all over the page. How can I stop this?

    There are several possible causes for this issue. Please take each of the following steps that you haven't already tried until it's resolved. Some may not apply in your case.
    1. Follow the instructions in this support article, and also this one, if applicable. A damaged or defective AC adapter could be the cause, even if it's the right kind.
    2. Press down all four corners of the trackpad at once and release. If there's any effect, it's likely to be temporary, and in that case the unit must be serviced or replaced.
    3. Open the Bluetooth preference pane in System Preferences and delete all pointing devices other than the trackpad, if applicable. Disconnect any USB pointing devices. By a "pointing device," I mean a peripheral that moves the cursor, such as a trackpad, mouse, trackball, or graphics tablet. A plain keyboard is not a pointing device.
    4. Start up in safe mode and test, preferably without launching any third-party applications. If you don't have the problem in safe mode, but it comes back when you restart as usual, stop here and post your results. Do the same if you can't start in safe mode. If there was no difference in safe mode, go on to the next step.
    5. Reset the System Management Controller.
    6. If you're using a Bluetooth trackpad, investigate potential sources of interference, including USB 3 devices.
    7. A swollen battery in a portable computer can impinge on the trackpad from below and cause erratic behavior. If you have trouble clicking the trackpad, this is likely the reason. The battery must be replaced without delay.
    8. There's a report that a (possibly defective) Thunderbolt Ethernet adapter can cause the built-in trackpad of a MacBook to  behave erratically. If you're using such an adapter, disconnect it and test.
    9. There's also a report of erratic cursor movements caused by an external display that was connected but not turned on.
    10. If none of the above applies, or if you have another reason to think that your computer is being remotely controlled, remove it from the network by turning off Wi-Fi (or your Wi-Fi access point), disconnecting from a Bluetooth network link, and unplugging the Ethernet cable or USB modem, whichever is applicable. If the cursor movements stop at once, you should suspect an intrusion.
    11. Make a "Genius" appointment at an Apple Store to have the machine and/or external trackpad tested.

  • How do I delete ..when logging into my email.. it populates my entire email address .. how do I stop this ?

    how do I delete.. when logging into my email.. it populates my entire email address.. how do I stop this ?????

    Hi Roam.
    Message understood.
    I managed to delete me and substitute her as Administrator. Thanks.
    you ask what machine I am now using, I am a Windows man, currently using XP Pro SP3 and have been for 10 years. A friend from the Education Dept gave me a phased out Mac with OS X in an endeavor to convert me.
    At first I was very impressed but as time went on I found that the Mac was not as user friendly as I had thought. The terminology was foreign to me, and where Windows placed thing automatically into place, with Mac I had to physically pick up and re-locate programs.
    But what really turned me off was that nearly every thing that I wanted to do I had to go to the net and try and find drivers or whatever to overcome my problems.
    A point in question, I purchased an external USB dual layer DVD burner. When connected to XP, it was recognized instantly and within a few minutes I as up and going. With the Mac, it is not even recognized let alone getting it to work!
    And then there are all the other little things like printing. In windows every thing from every page I can print, Ctrl + P. With the Mac, I am still trying to find out how to print a page from the Help menu.
    Enough said. My daughter is interested and that is all that counts. Let her work it all out, she is smarter (an younger) than me.
    Regards

  • My desktop pages keep collapsing into my doc. How can I stop this?

    I have an iMac 500 with the Lion 10.6 OS. When I try to move a page I'm working on to a different part of the desktop my mouse doesn't pick it up and move it. Instead it collapses the page into my dock at the bottom of the screen. How can I stop this collapsing feature?

    Chris, thank you for your response. It is appreciated. What you mentioned was my original problem with the SIM (the fact that it did not mesh well with Apple). After plenty of frustration and money wasted, a technician advised me to de-activate iMessage and FaceTime because I was getting charged 0.30 euro for every call and every text. I followed this suggestion and after testing it out, then the phone seemed to be working fine without the extra charge problems.
    This morning when I woke up, I checked my credits on the phone and I had lost another 1.20 euro during the night. When I called PosteMobile, they told me that I had sent another 4 messages to that same UK number. I'm not sure how this is possible, and when I try to explain my situation to them, they are not the friendliest people. I've used WIND before in Italy as a provider without any problems, and they are not listed on the link that you sent me for Italy, so I don't understand why PosteMobile is giving me so many problems.
    I was also wondering if there is a way to block my phone from sending messages to this number? (Although, I don't even know the last 3 digits of the number). Sorry if I'm rambling, but I don't know how to resolve this problem without starting a new contract with another service provider.

Maybe you are looking for

  • JSF Palette in Netbeans 6

    Hi ALL, Im workin' with Netbeans 6.0.1 and Java server Faces (not Visual JSF) and the palette of JSF doesn't has anything, and my question is how to add components into that palette like <h:form>, <h:panelGrid >,<h:outputText > or do I need a plugin?

  • Java beans in oracle

    Hi , Can somebody provide me document that help me to use java beans from scratch using oracle. Regards Nitin

  • Regarding  to logic

    Hi All, Having doubt in ranges ? im having  variable date1 which carries value sy-datlo. for ex : 12.02.2008 My requirment is i want date that shoul be exactly less than 1000 days by the current system date(date1) Regards, Murthy

  • Outbound idoc error

    hi experts. Iidoc type is ACC_DOCUMENT03. for header details(bkpf values)  idoc is sucess . while passing item details along with header details it is giving error status 26.   LOOP AT gt_bkpf INTO gs_bkpf.     gs_e1bpache09-doc_date   =  gs_bkpf-bld

  • Large Aperture Library 250GB

    Afternoon App, I have a large 250GB Library for Aperture - which is currently backed up on my External hard drive via Time Machine. Im looking to update my laptop Mac Pro 2012 to Mac Pro 2013 Retina  - but as these come with SSD im never going to fit