Imac firmware, failed to boot

hello, i have a tray-loading imac and i installed 10.2 and forgot to install the firmware, now it failed to boot, what do i do? i tried to press the option button during start up and nothing happened, i also tried to safe boot, and zap the pram- now what do i do? i need to get this done quickly! Please help!

The Mac Guy 12,
Have you tried rebooting with everything disconnected (ethernet, printer, etc.)?
Any third party add-ons such as newly added RAM?
Try this next if you have not already.
littleshoulders [:-)

Similar Messages

  • 2012 iMac 27" fails to boot AND wake from sleep

    Hi all,
    My 2012 iMac has recently started giving my trouble when booting and waking from sleep.
    When booting - A normal power up results in the apple logo screen being stuck, then I have to hold down the power button for a few seconds until power off, then i power it back up and the computer boots up normally. NOTE: only at the second time does the computer succeed in getting past the apple logo screen to the sign in screen.
    Waking from Sleep - When ever the mac goes to sleep he doesn’t seem to be able to wake up. Usually stuck on a black screen with just the spinning wheel shown. At times i waited more then an hour to see if he can get passed the black screen but in vain.
    Other then that the mac works fine.
    Both issues started roughly two weeks ago and roughly at the same time.
    My mac is mostly used for work, I'm familiar with computers so I am trying to be extra careful with installing weird applications but you could never know..
    SPEC:
    Late 2012 iMac 27'' - 3.4 Ghz i7.
    16GB RAM.
    1TB Fusion drive.
    2GB NVIDIA GTX 680MX
    Wired keyboard and a Magic mouse.
    Mountain Lion 10.8.5 (Updated and backed up on a regular basis)
    Things I've tried:
    Boot to Recovery and Repair Disk/Permissions.
    Safe Boot.
    SMC reset.
    PRAM reset.
    * The first two produced a single case of a normal start up, but after a shut down the problem remains.
    Any ideas/thoughts/help would be much appriciated,
    Thanks in advance,
    Idan.

    Bump.

  • IMac G3 failed to boot

    I installed a stick of 256 RAM into my old 333MHz G3 and for some reason it refuses to boot now. Pressing the power button, it powers on, but the button stays orange, screen does not come on. Removed the RAM and it boots fine once again. Just wondering if someone can shed some light on this, possibly a way to make this work so I wouldn't have wasted money on the RAM.

    Hello, 
    If the Mac functions fine without the RAM but doesn't with it installed it seems the module is defective. Return it to the retailer for a refund/replacement.
    Are you sure you have the correct spec?
    mrtotes

  • IMac G5 fails to boot when cold

    Normally, I keep my iMac on all the time to download podcasts and bit torrent stuff and for the most part have had no problems with this. I went home for the holidays and turned it off for 2 weeks. When I got back and turned it on, I got the "Ta da !" (or whatever its called) followed by the Apple logo and the spinner for a few seconds and then it shut off. I tried again and again and it kept doing this. I did notice that it seemed to stay on a hint longer each time. Eventually, I would get the login screen background before power off. Finally after at least a dozen attempts, I got the login screen and then everything seemed to work as expected. I ran the TechTool Deluxe software that came with my AppleCare plan and it said everything passed (except the extended hard drive tests). I saw a posting about someone having a similar problem with their Power Mac G5, but there was no explicit solution given in the thread. Everything seems to be running correctly now and I've still got about a year on my APP so there's no rush, but if there is a problem, I want to fix it. I'd rather not abandon my iMac at the repair shop for 2 weeks and then have them tell me that there's nothing wrong. Has anyone else had this problem? Suggestions? Thoughts? New hard drive?
    iMac G5, Powerbook G4 Mac OS X (10.4.8)
    iMac G5, Powerbook G4   Mac OS X (10.4.8)  

    I would not wait too long to get it looked at. could be the hard drive or it could be early signs of a power supply going bad. If it were me I would do a complete backup now and go ahead and take it to the repair center. I understand not wanting to be without it but it also makes more sense to be without it by choice and not after a complete failure.

  • Imac fails to boot - at all

    Hi,
    I restored my imac using original disks and then updated the osx to current over the web. all fine so far. then restored the system (full disk image) from time machine to recover my data.  restore said it worked ok but when the machine restarted it failed to boot and i just get a list of script top left of screen saying launch faild, debugger called etc.  Then gray screen and grey box in middle of screen saying you need to restart the computer.  This i have done numerous times but it just does the same thing again and again.  More worrying is that the machine will not boot from original disks either.  Any ideas before I take it to the apple store?
    Thanks, Pedro

    If the disk image or time machine backup was from a older version of OS X then what was currently installed restoring that image/TM backup may have corrupted the newer version of OS X.
    I suggest you start over by wiping the drive completely, then Restore your Mac from that TM/Image backup and Then Upgrade to Mavericks.
    You have the steps slightly backwards. The latest thing you should do is upgrade the OS to the newest version.

  • IMac Model No: A1312 running OS X fails to boot.

    I work in a school. We have a number of Mac devices. One being an iMac Model No: A1312 running OS X. Today this machine failed to boot – instead it started up but after about a minute of a screen with the Apple and the spinney cog wheel it dumped to a dark grey screen with an active cursor and responsive keys on the keyboard (the beep was heard when pressing the spacebar for example) but no log on box or other screen activity.
    I have tried all sorts of diagnostics – hard drives comes up as ok. Reload of OS X – twice but always the same result.
    Any suggestions as to what’s wrong please fellow Forum members?

    Thanks for your lone response @rkaufmann87 I'd have thought more responses were offered - perhaps an indication that this is a rare issue.
    There are no peripheral devices connected - the KB and mouse are wireless and clearly communicating with the device well. I've tried the suggested resolutions without the LAN cable connected and as stated in my OP with the LAN connected (from two different locations) can access the support pages etc. and indeed the machine has spent in excess of 4 hours powered up and twice reinstalling the OS X.  All seems to go well but then after the restart up comes the standard start screen with the Apple Icon and the spinning cog wheel then after a minute or so it dumps out to a darker screen with just the mouse cursor visible. The mouse moves the cursor and pressing various keys on the KB brings beep responses.
    As a School Network Manager, working with a very tight school budget, I'd rather get the machine sorted with Forum help and my in house effort if at all possible.  The last iMac job I put out to a recommended Apple repair Workshop was for a replacement screen to a still under warranty new 21 inch iMac and that cost about half the value of the machine to get done - ouch! 

  • IMac fails to boot from DVD

    I want to repair my HD, but my iMac fails to boot from either the Leopard install DVD or the original install CD for OS X. What can I do?

    Gary:
    Thanks for your reply.  How and what with both installers:  I hold down the "C" key until the Apple logo appears. The only thing that happenshat happens is that the little "sunball" spins interminably.  I waited at least 10 minutes before deciding that it was hopeless.
    I hear ya regarding the external HD but unfortunately don't have one.   Mario   

  • IMAC fails to boot up

    My IMAC fails to boot up. The IMAC powers up, the white backround with the Apple and the windmill spins completes, the system goes to the blue screen, and then a overlay fills the screen with a power button image in gray appears in the center of the monitor with text overlay in several languages instructing me to restart the computer. When I do this the same thing occurs. Can you help.

    I believe you are experiencing a "Kernel Panic"....this link will explain what it is and hopefully how to resolve it
    http://www.thexlab.com/faqs/kernelpanics.html

  • IMac will no longer boot ANY version of Windows CD/DVD

    I have a 20" unibody iMac 8,1 that originally came with Leopard and has been upgraded to Snow Leopard (currently 10.6.1). During Leopard days, it had Boot Camp running Windows XP (for games) and worked fine. At some point, boot camp was removed and the system was returned to a single partition. Recently, I've decided to install Windows 7 Ultimate 32-bit (retail cd) and so went through the Boot Camp Assistant to create a new boot camp partition and launch the Windows installer DVD. After going through the partition process successfully, the Windows 7 DVD failed to boot, ending in a black screen with a flashing underscore ( _ ). I tried to boot the Windows 7 DVD several times with the same result. Thinking that somehow the Windows 7 DVD was damaged, I got out my Windows XP install CD and tried to boot that, with the same result (black screen blinking underscore _ ). I tried this with a retail copy of Vista Ultimate 32 bit, with the same result. I have run Disk Utility and verified the disk contains no errors. I have tried manually forcing the boot to the Windows install DVD/CD's by holding Alt during boot, and manually clicking on them, with the same result. I have backed up the entire HD with Super Duper and erased the disk and then restored the from Super Duper copy, in case there was a problem with the partition table. All with same result, blinking underscore on a black screen when attempting to boot off Windows install media.
    This machine used to have boot camp successfully running XP under Leopard. Now I can't even boot from a Windows install CD/DVD (any kind of windows). What has happened? Did the Snow Leopard installation change something? Is there a firmware update that is needed? I have tried resetting PRAM and SMC with no result. I am out of ideas. All of these windows install disks work fine if I boot them with my MacBook Pro. It's just the iMac that won't boot a Windows install DVD/CD, of any kind.
    Help!

    I can boot both Snow Leopard and Leopard install disks, no problem. I cannot boot ANY version of Windows install disk (XP, Vista, 7). My Super Duper backup was a backup of my Snow Leopard install to reformat the drive, since one theory was that the partition table was messed up. No go.

  • Random I/O errors (hdd) and failing to boot, Windows not affected

    I'm experiencing lots of I/O errors when booting and running my Linux partition. I am dual booting Windows 7 (x86_64) and Arch Linux (i686) on a single HDD.
    Im using a Lenovo Ideapad G505s with a Seagate ST1000LM HDD and an SDD currently not in use.
    Partition layout:
    NAME FSTYPE LABEL UUID MOUNTPOINT
    sda
    ├─sda1 ntfs System Reserved D8B40750B4073094
    ├─sda2 ntfs 00EA107FEA107360
    └─sda3 ext3 b753e7d2-6a23-4c20-8fa7-bf281a4a09e4 /
    sr0
    All three are primary partitions. Using ext4 yields the exact same result.
    The problem is easy to reproduce:
    Install Windows 7 to first half of HDD and Arch on the second half
    At first Arch works fine but over the next couple of days increasingly more I/O errors show up and at some point the system fails to boot
    Windows seems to work just fine
    Dmesg output:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.16.2-1-ARCH (nobody@var-lib-archbuild-testing-i686-tobias) (gcc version 4.9.1 (GCC) ) #1 SMP PREEMPT Sat Sep 6 13:13:35 CEST 2014
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009555dfff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009555e000-0x0000000095d5efff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000095d5f000-0x0000000095dbbfff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000095dbc000-0x00000000966bbfff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000966bc000-0x000000009f8befff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009f8bf000-0x000000009fabefff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009fabf000-0x000000009fbbefff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009fbbf000-0x000000009fbfefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000009fbff000-0x000000009fbfffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009fc00000-0x00000000cfffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022effffff] usable
    [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: LENOVO 20255/Lenovo G505s, BIOS 83CN35WW(V2.05) 12/06/2013
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] e820: last_pfn = 0x9fc00 max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-FFFFF write-through
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
    [ 0.000000] 1 base 000080000000 mask FFFFE0000000 write-back
    [ 0.000000] 2 base 00009FBBD000 mask FFFFFFFFF000 uncachable
    [ 0.000000] 3 base 0000FFC00000 mask FFFFFFC00000 write-protect
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] TOM2: 000000022f000000 aka 8944M
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [c00fe1b0]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
    [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
    [ 0.000000] [mem 0x37000000-0x373fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
    [ 0.000000] [mem 0x30000000-0x36ffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
    [ 0.000000] [mem 0x00100000-0x003fffff] page 4k
    [ 0.000000] [mem 0x00400000-0x2fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff]
    [ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
    [ 0.000000] BRK [0x01798000, 0x01798fff] PGTABLE
    [ 0.000000] RAMDISK: [mem 0x7fcaf000-0x7fffffff]
    [ 0.000000] Allocated new RAMDISK: [mem 0x374ad000-0x377fd0d0]
    [ 0.000000] Move RAMDISK from [mem 0x7fcaf000-0x7ffff0d0] to [mem 0x374ad000-0x377fd0d0]
    [ 0.000000] ACPI: Early table checksum verification disabled
    [ 0.000000] ACPI: RSDP 0x000FE020 000024 (v02 LENOVO)
    [ 0.000000] ACPI: XSDT 0x9FBFE120 000094 (v01 LENOVO CB-01 00000001 01000013)
    [ 0.000000] ACPI: FACP 0x9FBFB000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: DSDT 0x9FBEA000 00CA66 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: FACS 0x9FB7C000 000040
    [ 0.000000] ACPI: SLIC 0x9FBFD000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: UEFI 0x9FBFC000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: HPET 0x9FBFA000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: APIC 0x9FBF9000 000084 (v03 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: MCFG 0x9FBF8000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: ASF! 0x9FBF7000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: BOOT 0x9FBE9000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: WDRT 0x9FBE8000 000047 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: WDAT 0x9FBE7000 0001AC (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: FPDT 0x9FBE5000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: MSDM 0x9FBE4000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 0x9FBE3000 000B9C (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 0x9FBE1000 001F6E (v02 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 1668MB HIGHMEM available.
    [ 0.000000] 887MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 377fe000
    [ 0.000000] low ram: 0 - 377fe000
    [ 0.000000] BRK [0x01799000, 0x01799fff] PGTABLE
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] Normal [mem 0x01000000-0x377fdfff]
    [ 0.000000] HighMem [mem 0x377fe000-0x9fbfffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009efff]
    [ 0.000000] node 0: [mem 0x00100000-0x9555dfff]
    [ 0.000000] node 0: [mem 0x95d5f000-0x95dbbfff]
    [ 0.000000] node 0: [mem 0x966bc000-0x9f8befff]
    [ 0.000000] node 0: [mem 0x9fbff000-0x9fbfffff]
    [ 0.000000] On node 0 totalpages: 649053
    [ 0.000000] free_area_init_node: node 0, pgdat c161c180, node_mem_map f60b5020
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3998 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1744 pages used for memmap
    [ 0.000000] Normal zone: 223230 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 3337 pages used for memmap
    [ 0.000000] HighMem zone: 421825 pages, LIFO batch:31
    [ 0.000000] Using APIC driver default
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x13] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] e820: [mem 0xd0000000-0xf7ffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 14 pages/cpu @f6071000 s33344 r0 d24000 u57344
    [ 0.000000] pcpu-alloc: s33344 r0 d24000 u57344 alloc=14*4096
    [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 647277
    [ 0.000000] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda3 rw radeon.dpm=1 initrd=../initramfs-linux.img
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Initializing CPU#0
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] allocated 5234680 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Initializing HighMem for node 0 (000377fe:0009fc00)
    [ 0.000000] Initializing Movable for node 0 (00000000:00000000)
    [ 0.000000] Memory: 2558328K/2596212K available (4512K kernel code, 483K rwdata, 1328K rodata, 568K init, 824K bss, 37884K reserved, 1687300K highmem)
    [ 0.000000] virtual kernel memory layout:
    fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    .init : 0xc1630000 - 0xc16be000 ( 568 kB)
    .data : 0xc146853a - 0xc162ec80 (1817 kB)
    .text : 0xc1000000 - 0xc146853a (4513 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
    [ 0.000000] NR_IRQS:2304 nr_irqs:712 16
    [ 0.000000] CPU 0 irqstacks, hard=f5408000 soft=f540a000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 1896.408 MHz processor
    [ 0.000028] Calibrating delay loop (skipped), value calculated using timer frequency.. 3794.85 BogoMIPS (lpj=6321360)
    [ 0.000032] pid_max: default: 32768 minimum: 301
    [ 0.000037] ACPI: Core revision 20140424
    [ 0.009582] ACPI: All ACPI Tables successfully acquired
    [ 0.015209] Security Framework initialized
    [ 0.015217] Yama: becoming mindful.
    [ 0.015230] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
    [ 0.015233] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
    [ 0.015472] Initializing cgroup subsys memory
    [ 0.015491] Initializing cgroup subsys devices
    [ 0.015498] Initializing cgroup subsys freezer
    [ 0.015502] Initializing cgroup subsys net_cls
    [ 0.015507] Initializing cgroup subsys blkio
    [ 0.015528] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
    [ 0.015531] CPU: Physical Processor ID: 0
    [ 0.015532] CPU: Processor Core ID: 0
    [ 0.015536] mce: CPU supports 7 MCE banks
    [ 0.015551] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
    Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
    tlb_flushall_shift: 6
    [ 0.015678] Freeing SMP alternatives memory: 16K (c16be000 - c16c2000)
    [ 0.016347] ftrace: allocating 19356 entries in 38 pages
    [ 0.023471] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.023812] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.056821] smpboot: CPU0: AMD A8-4500M APU with Radeon(tm) HD Graphics (fam: 15, model: 10, stepping: 01)
    [ 0.162662] Performance Events: Fam15h core perfctr, AMD PMU driver.
    [ 0.162668] ... version: 0
    [ 0.162670] ... bit width: 48
    [ 0.162671] ... generic registers: 6
    [ 0.162672] ... value mask: 0000ffffffffffff
    [ 0.162674] ... max period: 00007fffffffffff
    [ 0.162675] ... fixed-purpose events: 0
    [ 0.162676] ... event mask: 000000000000003f
    [ 0.179472] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.186176] CPU 1 irqstacks, hard=f554a000 soft=f554c000
    [ 0.186179] x86: Booting SMP configuration:
    [ 0.186182] .... node #0, CPUs: #1
    [ 0.218942] Initializing CPU#1
    [ 0.218972] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
    [ 0.226174] CPU 2 irqstacks, hard=f5570000 soft=f5572000
    [ 0.226179] #2
    [ 0.258736] Initializing CPU#2
    [ 0.258760] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
    [ 0.266174] CPU 3 irqstacks, hard=f559a000 soft=f559c000
    [ 0.266180] #3
    [ 0.276300] Initializing CPU#3
    [ 0.277268] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
    [ 0.279379] x86: Booted up 1 node, 4 CPUs
    [ 0.279384] smpboot: Total of 4 processors activated (15177.40 BogoMIPS)
    [ 0.280484] devtmpfs: initialized
    [ 0.280769] PM: Registering ACPI NVS region [mem 0x9fabf000-0x9fbbefff] (1048576 bytes)
    [ 0.281973] pinctrl core: initialized pinctrl subsystem
    [ 0.282053] RTC time: 22:28:26, date: 09/21/14
    [ 0.282107] NET: Registered protocol family 16
    [ 0.282225] cpuidle: using governor ladder
    [ 0.282228] cpuidle: using governor menu
    [ 0.282436] ACPI: bus type PCI registered
    [ 0.282439] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.282552] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.282556] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.282558] PCI: Using MMCONFIG for extended config space
    [ 0.282559] PCI: Using configuration type 1 for base access
    [ 0.293370] ACPI: Added _OSI(Module Device)
    [ 0.293374] ACPI: Added _OSI(Processor Device)
    [ 0.293376] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.293378] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.297280] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.301911] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.323484] ACPI: Interpreter enabled
    [ 0.323495] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
    [ 0.323501] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
    [ 0.323519] ACPI: (supports S0 S3 S4 S5)
    [ 0.323522] ACPI: Using IOAPIC for interrupt routing
    [ 0.323762] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.324136] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
    [ 0.324308] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
    [ 0.324511] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
    [ 0.335527] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.335534] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.335540] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
    [ 0.335709] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cf1ff])
    [ 0.335713] acpi PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000d3fff] (conflicts with Adapter ROM [mem 0x000cf800-0x000d07ff])
    [ 0.335718] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
    [ 0.335971] PCI host bridge to bus 0000:00
    [ 0.335974] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.335977] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.335985] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.335988] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.335990] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
    [ 0.335992] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
    [ 0.335994] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
    [ 0.335996] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.335998] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.336000] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.336001] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
    [ 0.336003] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
    [ 0.336005] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
    [ 0.336007] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
    [ 0.336009] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xf7ffffff]
    [ 0.336011] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff]
    [ 0.336013] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff]
    [ 0.336022] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
    [ 0.336199] pci 0000:00:01.0: [1002:9903] type 00 class 0x030000
    [ 0.336211] pci 0000:00:01.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
    [ 0.336217] pci 0000:00:01.0: reg 0x14: [io 0x4000-0x40ff]
    [ 0.336224] pci 0000:00:01.0: reg 0x18: [mem 0xf0300000-0xf033ffff]
    [ 0.336266] pci 0000:00:01.0: supports D1 D2
    [ 0.336358] pci 0000:00:01.1: [1002:9902] type 00 class 0x040300
    [ 0.336369] pci 0000:00:01.1: reg 0x10: [mem 0xf0344000-0xf0347fff]
    [ 0.336417] pci 0000:00:01.1: supports D1 D2
    [ 0.336509] pci 0000:00:02.0: [1022:1412] type 01 class 0x060400
    [ 0.336560] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
    [ 0.336710] pci 0000:00:04.0: [1022:1414] type 01 class 0x060400
    [ 0.336759] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
    [ 0.336812] pci 0000:00:04.0: System wakeup disabled by ACPI
    [ 0.336867] pci 0000:00:05.0: [1022:1415] type 01 class 0x060400
    [ 0.336916] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
    [ 0.336970] pci 0000:00:05.0: System wakeup disabled by ACPI
    [ 0.337102] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
    [ 0.337124] pci 0000:00:10.0: reg 0x10: [mem 0xf0348000-0xf0349fff 64bit]
    [ 0.337221] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
    [ 0.337272] pci 0000:00:10.0: System wakeup disabled by ACPI
    [ 0.337330] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
    [ 0.337347] pci 0000:00:11.0: reg 0x10: [io 0x4118-0x411f]
    [ 0.337356] pci 0000:00:11.0: reg 0x14: [io 0x4124-0x4127]
    [ 0.337364] pci 0000:00:11.0: reg 0x18: [io 0x4110-0x4117]
    [ 0.337373] pci 0000:00:11.0: reg 0x1c: [io 0x4120-0x4123]
    [ 0.337382] pci 0000:00:11.0: reg 0x20: [io 0x4100-0x410f]
    [ 0.337390] pci 0000:00:11.0: reg 0x24: [mem 0xf034e000-0xf034e7ff]
    [ 0.337516] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
    [ 0.337528] pci 0000:00:12.0: reg 0x10: [mem 0xf034d000-0xf034dfff]
    [ 0.337617] pci 0000:00:12.0: System wakeup disabled by ACPI
    [ 0.337703] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
    [ 0.338061] pci 0000:00:12.2: reg 0x10: [mem 0xf034c000-0xf034c0ff]
    [ 0.340177] pci 0000:00:12.2: supports D1 D2
    [ 0.340179] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.340285] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
    [ 0.340299] pci 0000:00:13.0: reg 0x10: [mem 0xf034b000-0xf034bfff]
    [ 0.340392] pci 0000:00:13.0: System wakeup disabled by ACPI
    [ 0.340458] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
    [ 0.340887] pci 0000:00:13.2: reg 0x10: [mem 0xf034a000-0xf034a0ff]
    [ 0.343004] pci 0000:00:13.2: supports D1 D2
    [ 0.343006] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.343116] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
    [ 0.343284] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
    [ 0.343303] pci 0000:00:14.2: reg 0x10: [mem 0xf0340000-0xf0343fff 64bit]
    [ 0.343360] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    [ 0.343454] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
    [ 0.343595] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
    [ 0.343659] pci 0000:00:14.4: System wakeup disabled by ACPI
    [ 0.343722] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
    [ 0.343802] pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
    [ 0.343878] pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
    [ 0.343955] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
    [ 0.344036] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
    [ 0.344112] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
    [ 0.344337] pci 0000:01:00.0: [1002:6663] type 00 class 0x038000
    [ 0.344355] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.344367] pci 0000:01:00.0: reg 0x18: [mem 0xf0200000-0xf023ffff 64bit]
    [ 0.344375] pci 0000:01:00.0: reg 0x20: [io 0x3000-0x30ff]
    [ 0.344388] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
    [ 0.344446] pci 0000:01:00.0: supports D1 D2
    [ 0.344449] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
    [ 0.349478] pci 0000:00:02.0: PCI bridge to [bus 01]
    [ 0.349488] pci 0000:00:02.0: bridge window [io 0x3000-0x3fff]
    [ 0.349493] pci 0000:00:02.0: bridge window [mem 0xf0200000-0xf02fffff]
    [ 0.349498] pci 0000:00:02.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.349615] pci 0000:02:00.0: [1969:10a0] type 00 class 0x020000
    [ 0.349642] pci 0000:02:00.0: reg 0x10: [mem 0xf0100000-0xf013ffff 64bit]
    [ 0.349653] pci 0000:02:00.0: reg 0x18: [io 0x2000-0x207f]
    [ 0.349752] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.356148] pci 0000:00:04.0: PCI bridge to [bus 02]
    [ 0.356157] pci 0000:00:04.0: bridge window [io 0x2000-0x2fff]
    [ 0.356162] pci 0000:00:04.0: bridge window [mem 0xf0100000-0xf01fffff]
    [ 0.356295] pci 0000:03:00.0: [168c:0036] type 00 class 0x028000
    [ 0.356334] pci 0000:03:00.0: reg 0x10: [mem 0xf0000000-0xf007ffff 64bit]
    [ 0.356393] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
    [ 0.356487] pci 0000:03:00.0: supports D1 D2
    [ 0.356490] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.362836] pci 0000:00:05.0: PCI bridge to [bus 03]
    [ 0.362848] pci 0000:00:05.0: bridge window [mem 0xf0000000-0xf00fffff]
    [ 0.363018] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
    [ 0.363032] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.363036] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.363039] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.363041] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
    [ 0.363044] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
    [ 0.363047] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
    [ 0.363049] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
    [ 0.363052] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
    [ 0.363054] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
    [ 0.363057] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
    [ 0.363059] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
    [ 0.363062] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
    [ 0.363064] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
    [ 0.363067] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xf7ffffff] (subtractive decode)
    [ 0.363069] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfed3ffff] (subtractive decode)
    [ 0.363072] pci 0000:00:14.4: bridge window [mem 0xfed45000-0xffffffff] (subtractive decode)
    [ 0.363129] pci_bus 0000:00: on NUMA node 0
    [ 0.366581] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [ 0.366668] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [ 0.366752] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [ 0.366834] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [ 0.366902] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [ 0.366953] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [ 0.367003] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [ 0.367062] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [ 0.367177] ACPI: Enabled 5 GPEs in block 00 to 1F
    [ 0.367230] ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
    [ 0.367446] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.367456] vgaarb: loaded
    [ 0.367458] vgaarb: bridge control possible 0000:00:01.0
    [ 0.367505] PCI: Using ACPI for IRQ routing
    [ 0.369255] PCI: pci_cache_line_size set to 64 bytes
    [ 0.369352] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
    [ 0.369355] e820: reserve RAM buffer [mem 0x9555e000-0x97ffffff]
    [ 0.369357] e820: reserve RAM buffer [mem 0x95dbc000-0x97ffffff]
    [ 0.369358] e820: reserve RAM buffer [mem 0x9f8bf000-0x9fffffff]
    [ 0.369360] e820: reserve RAM buffer [mem 0x9fc00000-0x9fffffff]
    [ 0.369516] NetLabel: Initializing
    [ 0.369518] NetLabel: domain hash size = 128
    [ 0.369519] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.369532] NetLabel: unlabeled traffic allowed by default
    [ 0.369583] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [ 0.369588] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
    [ 0.371730] Switched to clocksource hpet
    [ 0.378213] pnp: PnP ACPI init
    [ 0.378231] ACPI: bus type PNP registered
    [ 0.378374] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.378377] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 0.378381] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.378616] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.378678] pnp 00:02: Plug and Play ACPI device, IDs MSF0001 PNP0303 (active)
    [ 0.378740] pnp 00:03: Plug and Play ACPI device, IDs ETD061b ETD0001 PNP0f13 (active)
    [ 0.378836] system 00:04: [io 0x0400-0x04cf] could not be reserved
    [ 0.378839] system 00:04: [io 0x04d0-0x04d1] has been reserved
    [ 0.378841] system 00:04: [io 0x04d6] has been reserved
    [ 0.378844] system 00:04: [io 0x0680-0x06ff] has been reserved
    [ 0.378846] system 00:04: [io 0x077a] has been reserved
    [ 0.378848] system 00:04: [io 0x0c00-0x0c01] has been reserved
    [ 0.378850] system 00:04: [io 0x0c14] has been reserved
    [ 0.378853] system 00:04: [io 0x0c50-0x0c52] has been reserved
    [ 0.378855] system 00:04: [io 0x0c6c] has been reserved
    [ 0.378857] system 00:04: [io 0x0c6f] has been reserved
    [ 0.378859] system 00:04: [io 0x0cd0-0x0cdb] has been reserved
    [ 0.378862] system 00:04: [io 0x0840-0x0847] has been reserved
    [ 0.378864] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.378944] system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved
    [ 0.378947] system 00:05: [mem 0xffc00000-0xffffffff] has been reserved
    [ 0.378950] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.382206] pnp: PnP ACPI: found 6 devices
    [ 0.382211] ACPI: bus type PNP unregistered
    [ 0.420296] pci 0000:03:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
    [ 0.420325] pci 0000:01:00.0: BAR 6: assigned [mem 0xf0240000-0xf025ffff pref]
    [ 0.420328] pci 0000:00:02.0: PCI bridge to [bus 01]
    [ 0.420331] pci 0000:00:02.0: bridge window [io 0x3000-0x3fff]
    [ 0.420335] pci 0000:00:02.0: bridge window [mem 0xf0200000-0xf02fffff]
    [ 0.420339] pci 0000:00:02.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.420343] pci 0000:00:04.0: PCI bridge to [bus 02]
    [ 0.420346] pci 0000:00:04.0: bridge window [io 0x2000-0x2fff]
    [ 0.420349] pci 0000:00:04.0: bridge window [mem 0xf0100000-0xf01fffff]
    [ 0.420355] pci 0000:03:00.0: BAR 6: assigned [mem 0xf0080000-0xf008ffff pref]
    [ 0.420357] pci 0000:00:05.0: PCI bridge to [bus 03]
    [ 0.420361] pci 0000:00:05.0: bridge window [mem 0xf0000000-0xf00fffff]
    [ 0.420366] pci 0000:00:14.4: PCI bridge to [bus 04]
    [ 0.420377] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.420380] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.420382] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.420384] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
    [ 0.420386] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
    [ 0.420388] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
    [ 0.420391] pci_bus 0000:00: resource 10 [mem 0x000d4000-0x000d7fff]
    [ 0.420393] pci_bus 0000:00: resource 11 [mem 0x000d8000-0x000dbfff]
    [ 0.420395] pci_bus 0000:00: resource 12 [mem 0x000dc000-0x000dffff]
    [ 0.420397] pci_bus 0000:00: resource 13 [mem 0x000e0000-0x000e3fff]
    [ 0.420399] pci_bus 0000:00: resource 14 [mem 0x000e4000-0x000e7fff]
    [ 0.420401] pci_bus 0000:00: resource 15 [mem 0x000e8000-0x000ebfff]
    [ 0.420403] pci_bus 0000:00: resource 16 [mem 0x000ec000-0x000effff]
    [ 0.420405] pci_bus 0000:00: resource 17 [mem 0xd0000000-0xf7ffffff]
    [ 0.420407] pci_bus 0000:00: resource 18 [mem 0xfc000000-0xfed3ffff]
    [ 0.420409] pci_bus 0000:00: resource 19 [mem 0xfed45000-0xffffffff]
    [ 0.420411] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
    [ 0.420413] pci_bus 0000:01: resource 1 [mem 0xf0200000-0xf02fffff]
    [ 0.420416] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.420418] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
    [ 0.420420] pci_bus 0000:02: resource 1 [mem 0xf0100000-0xf01fffff]
    [ 0.420422] pci_bus 0000:03: resource 1 [mem 0xf0000000-0xf00fffff]
    [ 0.420425] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
    [ 0.420427] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
    [ 0.420429] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.420431] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000c3fff]
    [ 0.420433] pci_bus 0000:04: resource 8 [mem 0x000c4000-0x000c7fff]
    [ 0.420435] pci_bus 0000:04: resource 9 [mem 0x000c8000-0x000cbfff]
    [ 0.420437] pci_bus 0000:04: resource 10 [mem 0x000d4000-0x000d7fff]
    [ 0.420439] pci_bus 0000:04: resource 11 [mem 0x000d8000-0x000dbfff]
    [ 0.420441] pci_bus 0000:04: resource 12 [mem 0x000dc000-0x000dffff]
    [ 0.420443] pci_bus 0000:04: resource 13 [mem 0x000e0000-0x000e3fff]
    [ 0.420445] pci_bus 0000:04: resource 14 [mem 0x000e4000-0x000e7fff]
    [ 0.420447] pci_bus 0000:04: resource 15 [mem 0x000e8000-0x000ebfff]
    [ 0.420449] pci_bus 0000:04: resource 16 [mem 0x000ec000-0x000effff]
    [ 0.420451] pci_bus 0000:04: resource 17 [mem 0xd0000000-0xf7ffffff]
    [ 0.420453] pci_bus 0000:04: resource 18 [mem 0xfc000000-0xfed3ffff]
    [ 0.420455] pci_bus 0000:04: resource 19 [mem 0xfed45000-0xffffffff]
    [ 0.420484] NET: Registered protocol family 2
    [ 0.420674] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
    [ 0.420689] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
    [ 0.420717] TCP: Hash tables configured (established 8192 bind 8192)
    [ 0.420733] TCP: reno registered
    [ 0.420736] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.420742] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.420798] NET: Registered protocol family 1
    [ 0.420831] pci 0000:00:01.0: Boot video device
    [ 1.038734] pci 0000:02:00.0: set MSI_INTX_DISABLE_BUG flag
    [ 1.038759] PCI: CLS 64 bytes, default 64
    [ 1.038818] Unpacking initramfs...
    [ 1.112669] Freeing initrd memory: 3396K (f74ad000 - f77fe000)
    [ 1.112753] Simple Boot Flag at 0x44 set to 0x1
    [ 1.113077] perf: AMD NB counters detected
    [ 1.113122] LVT offset 0 assigned for vector 0x400
    [ 1.113138] perf: AMD IBS detected (0x000000ff)
    [ 1.113149] apm: BIOS not found.
    [ 1.113200] Scanning for low memory corruption every 60 seconds
    [ 1.113689] futex hash table entries: 1024 (order: 4, 65536 bytes)
    [ 1.114240] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [ 1.116388] zbud: loaded
    [ 1.116669] VFS: Disk quotas dquot_6.5.2
    [ 1.116720] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 1.116962] msgmni has been set to 1707
    [ 1.117034] Key type big_key registered
    [ 1.117325] bounce: pool size: 64 pages
    [ 1.117370] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 1.117448] io scheduler noop registered
    [ 1.117452] io scheduler deadline registered
    [ 1.117524] io scheduler cfq registered (default)
    [ 1.118017] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 1.118037] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 1.118114] GHES: HEST is not enabled!
    [ 1.118129] isapnp: Scanning for PnP cards...
    [ 1.513691] isapnp: No Plug & Play device found
    [ 1.513876] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 1.514746] rtc_cmos 00:01: RTC can wake from S4
    [ 1.515007] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
    [ 1.515032] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
    [ 1.515076] ledtrig-cpu: registered to indicate activity on CPUs
    [ 1.515246] TCP: cubic registered
    [ 1.515386] NET: Registered protocol family 10
    [ 1.515657] NET: Registered protocol family 17
    [ 1.516096] Using IPI No-Shortcut mode
    [ 1.516269] registered taskstats version 1
    [ 1.516866] Magic number: 14:856:502
    [ 1.516927] rtc_cmos 00:01: setting system clock to 2014-09-21 22:28:27 UTC (1411338507)
    [ 1.517032] PM: Hibernation image not present or could not be loaded.
    [ 1.517281] Freeing unused kernel memory: 568K (c1630000 - c16be000)
    [ 1.517350] Write protecting the kernel text: 4516k
    [ 1.517388] Write protecting the kernel read-only data: 1332k
    [ 1.527560] random: systemd-tmpfile urandom read with 0 bits of entropy available
    [ 1.529660] systemd-udevd[57]: starting version 216
    [ 1.549349] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSSG] at 0x60,0x64 irq 1,12
    [ 1.568048] ACPI: bus type USB registered
    [ 1.568103] usbcore: registered new interface driver usbfs
    [ 1.568141] usbcore: registered new interface driver hub
    [ 1.568537] SCSI subsystem initialized
    [ 1.574578] usbcore: registered new device driver usb
    [ 1.593572] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.593667] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 1.593746] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.594746] ehci-pci: EHCI PCI platform driver
    [ 1.594935] QUIRK: Enable AMD PLL fix
    [ 1.594970] ehci-pci 0000:00:12.2: EHCI Host Controller
    [ 1.594980] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
    [ 1.594989] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 1.595002] ehci-pci 0000:00:12.2: debug port 1
    [ 1.595055] ehci-pci 0000:00:12.2: irq 17, io mem 0xf034c000
    [ 1.595121] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 1.595830] ohci-pci: OHCI PCI platform driver
    [ 1.601895] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
    [ 1.602284] libata version 3.00 loaded.
    [ 1.602306] hub 1-0:1.0: USB hub found
    [ 1.602325] hub 1-0:1.0: 5 ports detected
    [ 1.602883] ehci-pci 0000:00:13.2: EHCI Host Controller
    [ 1.602893] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
    [ 1.602899] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 1.602912] ehci-pci 0000:00:13.2: debug port 1
    [ 1.602945] ehci-pci 0000:00:13.2: irq 17, io mem 0xf034a000
    [ 1.612011] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
    [ 1.612308] hub 2-0:1.0: USB hub found
    [ 1.612317] hub 2-0:1.0: 5 ports detected
    [ 1.612814] xhci_hcd 0000:00:10.0: xHCI Host Controller
    [ 1.612828] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
    [ 1.613042] xhci_hcd 0000:00:10.0: irq 40 for MSI/MSI-X
    [ 1.613048] xhci_hcd 0000:00:10.0: irq 41 for MSI/MSI-X
    [ 1.613052] xhci_hcd 0000:00:10.0: irq 42 for MSI/MSI-X
    [ 1.613056] xhci_hcd 0000:00:10.0: irq 43 for MSI/MSI-X
    [ 1.613060] xhci_hcd 0000:00:10.0: irq 44 for MSI/MSI-X
    [ 1.613374] hub 3-0:1.0: USB hub found
    [ 1.613388] hub 3-0:1.0: 2 ports detected
    [ 1.613609] xhci_hcd 0000:00:10.0: xHCI Host Controller
    [ 1.613614] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4
    [ 1.616754] hub 4-0:1.0: USB hub found
    [ 1.616768] hub 4-0:1.0: 2 ports detected
    [ 1.617093] ohci-pci 0000:00:12.0: OHCI PCI host controller
    [ 1.617107] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 5
    [ 1.617152] ohci-pci 0000:00:12.0: irq 18, io mem 0xf034d000
    [ 1.645460] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.673072] hub 5-0:1.0: USB hub found
    [ 1.673098] hub 5-0:1.0: 5 ports detected
    [ 1.673547] ohci-pci 0000:00:13.0: OHCI PCI host controller
    [ 1.673554] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 6
    [ 1.673585] ohci-pci 0000:00:13.0: irq 18, io mem 0xf034b000
    [ 1.729803] hub 6-0:1.0: USB hub found
    [ 1.729831] hub 6-0:1.0: 5 ports detected
    [ 1.730166] ahci 0000:00:11.0: version 3.0
    [ 1.730351] ahci 0000:00:11.0: irq 45 for MSI/MSI-X
    [ 1.730404] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
    [ 1.730409] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
    [ 1.731131] scsi0 : ahci
    [ 1.731321] scsi1 : ahci
    [ 1.731403] ata1: SATA max UDMA/133 abar m2048@0xf034e000 port 0xf034e100 irq 45
    [ 1.731407] ata2: SATA max UDMA/133 abar m2048@0xf034e000 port 0xf034e180 irq 45
    [ 1.962152] usb 1-4: new high-speed USB device number 3 using ehci-pci
    [ 2.115336] tsc: Refined TSC clocksource calibration: 1896.456 MHz
    [ 2.215395] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 2.215424] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 2.216948] ata2.00: ATAPI: MATSHITADVD-RAM UJ8C2, 1.00, max UDMA/133
    [ 2.218438] ata2.00: configured for UDMA/133
    [ 2.274381] ata1.00: ATA-9: ST1000LM014-1EJ164, LVD3, max UDMA/133
    [ 2.274386] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 2.318651] ata1.00: configured for UDMA/133
    [ 2.318844] scsi 0:0:0:0: Direct-Access ATA ST1000LM014-1EJ1 LVD3 PQ: 0 ANSI: 5
    [ 2.320735] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8C2 1.00 PQ: 0 ANSI: 5
    [ 2.337991] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [ 2.337996] sd 0:0:0:0: [sda] 4096-byte physical blocks
    [ 2.338079] sd 0:0:0:0: [sda] Write Protect is off
    [ 2.338085] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.338151] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.338885] sda: sda1 sda2 sda3
    [ 2.339411] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 2.348995] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 2.348999] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.349240] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 2.395434] usb 3-1: new low-speed USB device number 2 using xhci_hcd
    [ 2.438944] ata1.00: exception Emask 0x0 SAct 0x80 SErr 0x0 action 0x6
    [ 2.438989] ata1.00: irq_stat 0x40000008
    [ 2.439030] ata1.00: failed command: READ FPDMA QUEUED
    [ 2.439074] ata1.00: cmd 60/08:38:18:08:00/00:00:00:00:00/40 tag 7 ncq 4096 in
    res 41/84:08:18:08:00/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 2.439127] ata1.00: status: { DRDY ERR }
    [ 2.439166] ata1.00: error: { ICRC ABRT }
    [ 2.439207] ata1: hard resetting link
    [ 2.555934] usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 2.555943] usb 3-1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 2.559635] hidraw: raw HID events driver (C) Jiri Kosina
    [ 2.586950] usbcore: registered new interface driver usbhid
    [ 2.586953] usbhid: USB HID core driver
    [ 2.588065] input: Microsoft Comfort Curve Keyboard 3000 as /devices/pci0000:00/0000:00:10.0/usb3/3-1/3-1:1.0/0003:045E:0780.0001/input/input2
    [ 2.588153] hid-generic 0003:045E:0780.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 3000] on usb-0000:00:10.0-1/input0
    [ 2.594030] input: Microsoft Comfort Curve Keyboard 3000 as /devices/pci0000:00/0000:00:10.0/usb3/3-1/3-1:1.1/0003:045E:0780.0002/input/input3
    [ 2.594150] hid-generic 0003:045E:0780.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 3000] on usb-0000:00:10.0-1/input1
    [ 2.662213] usb 2-2: new high-speed USB device number 2 using ehci-pci
    [ 2.915446] usb 5-1: new low-speed USB device number 2 using ohci-pci
    [ 2.925441] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 3.039928] ata1.00: configured for UDMA/133
    [ 3.039955] ata1: EH complete
    [ 3.081259] input: USB Mouse as /devices/pci0000:00/0000:00:12.0/usb5/5-1/5-1:1.0/0003:05E3:1205.0003/input/input4
    [ 3.081368] hid-generic 0003:05E3:1205.0003: input,hidraw2: USB HID v1.10 Mouse [USB Mouse ] on usb-0000:00:12.0-1/input0
    [ 3.089081] ata1.00: exception Emask 0x0 SAct 0x40000 SErr 0x0 action 0x6
    [ 3.089128] ata1.00: irq_stat 0x40000008
    [ 3.089168] ata1.00: failed command: READ FPDMA QUEUED
    [ 3.089212] ata1.00: cmd 60/08:90:78:28:03/00:00:00:00:00/40 tag 18 ncq 4096 in
    res 41/84:08:7c:28:03/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 3.089265] ata1.00: status: { DRDY ERR }
    [ 3.089304] ata1.00: error: { ICRC ABRT }
    [ 3.089346] ata1: hard resetting link
    [ 3.115583] Switched to clocksource tsc
    [ 3.575598] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 3.694602] ata1.00: configured for UDMA/133
    [ 3.694621] ata1: EH complete
    [ 3.809120] ata1.00: exception Emask 0x0 SAct 0x1e00 SErr 0x0 action 0x6
    [ 3.809168] ata1.00: irq_stat 0x40000008
    [ 3.809208] ata1.00: failed command: READ FPDMA QUEUED
    [ 3.809251] ata1.00: cmd 60/08:48:10:08:00/00:00:00:00:00/40 tag 9 ncq 4096 in
    res 41/84:08:10:08:00/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 3.809305] ata1.00: status: { DRDY ERR }
    [ 3.809343] ata1.00: error: { ICRC ABRT }
    [ 3.809385] ata1: hard resetting link
    [ 4.295566] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 4.404835] ata1.00: configured for UDMA/133
    [ 4.404858] ata1: EH complete
    [ 4.453715] ata1.00: exception Emask 0x0 SAct 0x1fe000 SErr 0x0 action 0x0
    [ 4.453760] ata1.00: irq_stat 0x40000008
    [ 4.453799] ata1.00: failed command: READ FPDMA QUEUED
    [ 4.453842] ata1.00: cmd 60/80:68:80:08:00/01:00:00:00:00/40 tag 13 ncq 196608 in
    res 41/40:80:b8:09:00/00:01:00:00:00/00 Emask 0x409 (media error) <F>
    [ 4.453894] ata1.00: status: { DRDY ERR }
    [ 4.453932] ata1.00: error: { UNC }
    [ 4.637639] ata1.00: configured for UDMA/133
    [ 4.637688] sd 0:0:0:0: [sda] Unhandled sense code
    [ 4.637691] sd 0:0:0:0: [sda]
    [ 4.637693] Result: hostbyte=0x00 driverbyte=0x08
    [ 4.637695] sd 0:0:0:0: [sda]
    [ 4.637697] Sense Key : 0x3 [current] [descriptor]
    [ 4.637700] Descriptor sense data with sense descriptors (in hex):
    [ 4.637702] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 4.637710] 00 00 09 b8
    [ 4.637714] sd 0:0:0:0: [sda]
    [ 4.637716] ASC=0x11 ASCQ=0x4
    [ 4.637718] sd 0:0:0:0: [sda] CDB:
    [ 4.637719] cdb[0]=0x28: 28 00 00 00 08 80 00 01 80 00
    [ 4.637727] end_request: I/O error, dev sda, sector 2488
    [ 4.637786] Buffer I/O error on device sda1, logical block 55
    [ 4.637826] Buffer I/O error on device sda1, logical block 56
    [ 4.637866] Buffer I/O error on device sda1, logical block 57
    [ 4.637905] Buffer I/O error on device sda1, logical block 58
    [ 4.637945] Buffer I/O error on device sda1, logical block 59
    [ 4.637984] Buffer I/O error on device sda1, logical block 60
    [ 4.638024] Buffer I/O error on device sda1, logical block 61
    [ 4.638063] Buffer I/O error on device sda1, logical block 62
    [ 4.638105] Buffer I/O error on device sda1, logical block 63
    [ 4.638188] ata1: EH complete
    [ 4.879313] ata1: limiting SATA link speed to 3.0 Gbps
    [ 4.879320] ata1.00: exception Emask 0x0 SAct 0x4000 SErr 0x0 action 0x6
    [ 4.879364] ata1.00: irq_stat 0x40000008
    [ 4.879404] ata1.00: failed command: READ FPDMA QUEUED
    [ 4.879448] ata1.00: cmd 60/08:70:50:2b:03/00:00:00:00:00/40 tag 14 ncq 4096 in
    res 41/84:08:50:2b:03/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 4.879502] ata1.00: status: { DRDY ERR }
    [ 4.879540] ata1.00: error: { ICRC ABRT }
    [ 4.879583] ata1: hard resetting link
    [ 5.365653] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
    [ 5.469816] ata1.00: configured for UDMA/133
    [ 5.469845] ata1: EH complete
    [ 5.582799] ata1.00: exception Emask 0x0 SAct 0x80 SErr 0x0 action 0x6
    [ 5.582859] ata1.00: irq_stat 0x40000008
    [ 5.582900] ata1.00: failed command: READ FPDMA QUEUED
    [ 5.582943] ata1.00: cmd 60/08:38:18:0b:00/00:00:00:00:00/40 tag 7 ncq 4096 in
    res 41/84:08:19:0b:00/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 5.582997] ata1.00: status: { DRDY ERR }
    [ 5.583036] ata1.00: error: { ICRC ABRT }
    [ 5.583078] ata1: hard resetting link
    [ 6.069015] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
    [ 6.191135] ata1.00: configured for UDMA/133
    [ 6.191166] ata1: EH complete
    [ 6.256026] ata1.00: exception Emask 0x0 SAct 0x8000 SErr 0x0 action 0x6
    [ 6.256073] ata1.00: irq_stat 0x40000008
    [ 6.256114] ata1.00: failed command: READ FPDMA QUEUED
    [ 6.256158] ata1.00: cmd 60/08:78:00:38:03/00:00:00:00:00/40 tag 15 ncq 4096 in
    res 41/84:08:02:38:03/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 6.256212] ata1.00: status: { DRDY ERR }
    [ 6.256250] ata1.00: error: { ICRC ABRT }
    [ 6.256292] ata1: hard resetting link
    [ 6.742436] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
    [ 6.845773] ata1.00: configured for UDMA/133
    [ 6.845806] ata1: EH complete
    [ 6.986177] ata1.00: exception Emask 0x0 SAct 0x80000 SErr 0x0 action 0x6
    [ 6.986223] ata1.00: irq_stat 0x40000008
    [ 6.986264] ata1.00: failed command: READ FPDMA QUEUED
    [ 6.986308] ata1.00: cmd 60/08:98:b0:f8:b5/00:00:58:00:00/40 tag 19 ncq 4096 in
    res 41/84:08:b0:f8:b5/00:00:58:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 6.986360] ata1.00: status: { DRDY ERR }
    [ 6.986399] ata1.00: error: { ICRC ABRT }
    [ 6.986440] ata1: hard resetting link
    [ 7.472592] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
    [ 7.578097] ata1.00: configured for UDMA/133
    [ 7.578124] ata1: EH complete
    [ 7.587216] random: nonblocking pool is initialized
    [ 7.602800] ata1: limiting SATA link speed to 1.5 Gbps
    [ 7.602806] ata1.00: exception Emask 0x0 SAct 0x800000 SErr 0x0 action 0x6
    [ 7.602850] ata1.00: irq_stat 0x40000008
    [ 7.602889] ata1.00: failed command: READ FPDMA QUEUED
    [ 7.602931] ata1.00: cmd 60/08:b8:c8:58:b6/00:00:58:00:00/40 tag 23 ncq 4096 in
    res 41/84:08:cc:58:b6/00:00:58:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 7.602982] ata1.00: status: { DRDY ERR }
    [ 7.603020] ata1.00: error: { ICRC ABRT }
    [ 7.603061] ata1: hard resetting link
    [ 8.089174] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 8.188490] ata1.00: configured for UDMA/133
    [ 8.188517] ata1: EH complete
    [ 8.216300] ata1.00: exception Emask 0x0 SAct 0x2000000 SErr 0x0 action 0x6
    [ 8.216361] ata1.00: irq_stat 0x40000008
    [ 8.216402] ata1.00: failed command: READ FPDMA QUEUED
    [ 8.216446] ata1.00: cmd 60/08:c8:d0:78:b6/00:00:58:00:00/40 tag 25 ncq 4096 in
    res 41/84:08:d0:78:b6/00:00:58:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 8.216500] ata1.00: status: { DRDY ERR }
    [ 8.216539] ata1.00: error: { ICRC ABRT }
    [ 8.216581] ata1: hard resetting link
    [ 8.702603] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 8.809726] ata1.00: configured for UDMA/133
    [ 8.809758] ata1: EH complete
    [ 8.836250] ata1.00: exception Emask 0x0 SAct 0x8000000 SErr 0x0 action 0x6
    [ 8.836295] ata1.00: irq_stat 0x40000008
    [ 8.836335] ata1.00: failed command: READ FPDMA QUEUED
    [ 8.836377] ata1.00: cmd 60/08:d8:d8:98:b6/00:00:58:00:00/40 tag 27 ncq 4096 in
    res 41/84:08:d8:98:b6/00:00:58:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 8.836429] ata1.00: status: { DRDY ERR }
    [ 8.836467] ata1.00: error: { ICRC ABRT }
    [ 8.836507] ata1: hard resetting link
    [ 9.322654] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 9.430994] ata1.00: configured for UDMA/133
    [ 9.431018] ata1: EH complete
    [ 9.664088] EXT4-fs (sda3): mounting ext3 file system using the ext4 subsystem
    [ 9.686362] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
    [ 9.837482] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6
    [ 9.837542] ata1.00: irq_stat 0x40000008
    [ 9.837583] ata1.00: failed command: READ FPDMA QUEUED
    [ 9.837626] ata1.00: cmd 60/08:28:20:08:89/00:00:5e:00:00/40 tag 5 ncq 4096 in
    res 41/84:08:20:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 9.837680] ata1.00: status: { DRDY ERR }
    [ 9.837719] ata1.00: error: { ICRC ABRT }
    [ 9.837761] ata1: hard resetting link
    [ 10.322740] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 10.515900] ata1.00: configured for UDMA/133
    [ 10.515972] sd 0:0:0:0: [sda]
    [ 10.515975] Result: hostbyte=0x00 driverbyte=0x08
    [ 10.515978] sd 0:0:0:0: [sda]
    [ 10.515979] Sense Key : 0xb [current] [descriptor]
    [ 10.515983] Descriptor sense data with sense descriptors (in hex):
    [ 10.515984] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 10.515992] 5e 89 08 20
    [ 10.515997] sd 0:0:0:0: [sda]
    [ 10.515998] ASC=0x47 ASCQ=0x0
    [ 10.516001] sd 0:0:0:0: [sda] CDB:
    [ 10.516002] cdb[0]=0x28: 28 00 5e 89 08 20 00 00 08 00
    [ 10.516010] end_request: I/O error, dev sda, sector 1586038816
    [ 10.516148] ata1: EH complete
    [ 10.529733] ata1.00: limiting speed to UDMA/100:PIO4
    [ 10.529740] ata1.00: exception Emask 0x0 SAct 0x7fffff1f SErr 0x0 action 0x6
    [ 10.529786] ata1.00: irq_stat 0x40000008
    [ 10.529826] ata1.00: failed command: READ FPDMA QUEUED
    [ 10.529870] ata1.00: cmd 60/08:40:d0:08:89/00:00:5e:00:00/40 tag 8 ncq 4096 in
    res 41/84:08:d4:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 10.529924] ata1.00: status: { DRDY ERR }
    [ 10.529962] ata1.00: error: { ICRC ABRT }
    [ 10.530004] ata1: hard resetting link
    [ 11.016129] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 11.139673] ata1.00: configured for UDMA/100
    [ 11.139723] sd 0:0:0:0: [sda]
    [ 11.139725] Result: hostbyte=0x00 driverbyte=0x08
    [ 11.139728] sd 0:0:0:0: [sda]
    [ 11.139730] Sense Key : 0xb [current] [descriptor]
    [ 11.139733] Descriptor sense data with sense descriptors (in hex):
    [ 11.139735] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 11.139743] 5e 89 08 d4
    [ 11.139747] sd 0:0:0:0: [sda]
    [ 11.139749] ASC=0x47 ASCQ=0x0
    [ 11.139751] sd 0:0:0:0: [sda] CDB:
    [ 11.139753] cdb[0]=0x28: 28 00 5e 89 08 d0 00 00 08 00
    [ 11.139761] end_request: I/O error, dev sda, sector 1586038992
    [ 11.139889] ata1: EH complete
    [ 11.153122] ata1.00: exception Emask 0x0 SAct 0x7fffffc1 SErr 0x0 action 0x6
    [ 11.153169] ata1.00: irq_stat 0x40000008
    [ 11.153210] ata1.00: failed command: READ FPDMA QUEUED
    [ 11.153253] ata1.00: cmd 60/08:30:28:08:89/00:00:5e:00:00/40 tag 6 ncq 4096 in
    res 41/84:08:28:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 11.153306] ata1.00: status: { DRDY ERR }
    [ 11.153345] ata1.00: error: { ICRC ABRT }
    [ 11.153386] ata1: hard resetting link
    [ 11.639485] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 11.749884] ata1.00: configured for UDMA/100
    [ 11.749918] sd 0:0:0:0: [sda]
    [ 11.749920] Result: hostbyte=0x00 driverbyte=0x08
    [ 11.749923] sd 0:0:0:0: [sda]
    [ 11.749925] Sense Key : 0xb [current] [descriptor]
    [ 11.749928] Descriptor sense data with sense descriptors (in hex):
    [ 11.749930] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 11.749938] 5e 89 08 28
    [ 11.749942] sd 0:0:0:0: [sda]
    [ 11.749944] ASC=0x47 ASCQ=0x0
    [ 11.749946] sd 0:0:0:0: [sda] CDB:
    [ 11.749948] cdb[0]=0x28: 28 00 5e 89 08 28 00 00 08 00
    [ 11.749956] end_request: I/O error, dev sda, sector 1586038824
    [ 11.750093] ata1: EH complete
    [ 11.763159] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6
    [ 11.763206] ata1.00: irq_stat 0x40000008
    [ 11.763247] ata1.00: failed command: READ FPDMA QUEUED
    [ 11.763290] ata1.00: cmd 60/08:28:c8:08:89/00:00:5e:00:00/40 tag 5 ncq 4096 in
    res 41/84:08:c8:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 11.763343] ata1.00: status: { DRDY ERR }
    [ 11.763382] ata1.00: error: { ICRC ABRT }
    [ 11.763424] ata1: hard resetting link
    [ 12.249523] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 12.360321] ata1.00: configured for UDMA/100
    [ 12.360370] sd 0:0:0:0: [sda]
    [ 12.360372] Result: hostbyte=0x00 driverbyte=0x08
    [ 12.360375] sd 0:0:0:0: [sda]
    [ 12.360377] Sense Key : 0xb [current] [descriptor]
    [ 12.360380] Descriptor sense data with sense descriptors (in hex):
    [ 12.360381] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 12.360390] 5e 89 08 c8
    [ 12.360394] sd 0:0:0:0: [sda]
    [ 12.360395] ASC=0x47 ASCQ=0x0
    [ 12.360398] sd 0:0:0:0: [sda] CDB:
    [ 12.360399] cdb[0]=0x28: 28 00 5e 89 08 c8 00 00 08 00
    [ 12.360407] end_request: I/O error, dev sda, sector 1586038984
    [ 12.360543] ata1: EH complete
    [ 12.369958] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6
    [ 12.370005] ata1.00: irq_stat 0x40000008
    [ 12.370045] ata1.00: failed command: READ FPDMA QUEUED
    [ 12.370090] ata1.00: cmd 60/08:28:38:08:89/00:00:63:00:00/40 tag 5 ncq 4096 in
    res 41/84:08:3a:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 12.370143] ata1.00: status: { DRDY ERR }
    [ 12.370182] ata1.00: error: { ICRC ABRT }
    [ 12.370224] ata1: hard resetting link
    [ 12.856285] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 12.959379] ata1.00: configured for UDMA/100
    [ 12.959426] sd 0:0:0:0: [sda]
    [ 12.959429] Result: hostbyte=0x00 driverbyte=0x08
    [ 12.959432] sd 0:0:0:0: [sda]
    [ 12.959433] Sense Key : 0xb [current] [descriptor]
    [ 12.959437] Descriptor sense data with sense descriptors (in hex):
    [ 12.959438] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 12.959447] 63 89 08 3a
    [ 12.959462] sd 0:0:0:0: [sda]
    [ 12.959464] ASC=0x47 ASCQ=0x0
    [ 12.959466] sd 0:0:0:0: [sda] CDB:
    [ 12.959468] cdb[0]=0x28: 28 00 63 89 08 38 00 00 08 00
    [ 12.959476] end_request: I/O error, dev sda, sector 1669924920
    [ 12.959616] ata1: EH complete
    [ 12.973195] ata1.00: limiting speed to UDMA/33:PIO4
    [ 12.973202] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6
    [ 12.973247] ata1.00: irq_stat 0x40000008
    [ 12.973287] ata1.00: failed command: READ FPDMA QUEUED
    [ 12.973331] ata1.00: cmd 60/08:30:c0:08:89/00:00:5e:00:00/40 tag 6 ncq 4096 in
    res 41/84:08:c0:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 12.973384] ata1.00: status: { DRDY ERR }
    [ 12.973423] ata1.00: error: { ICRC ABRT }
    [ 12.973464] ata1: hard resetting link
    [ 13.459735] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 13.569691] ata1.00: configured for UDMA/33
    [ 13.569750] sd 0:0:0:0: [sda]
    [ 13.569753] Result: hostbyte=0x00 driverbyte=0x08
    [ 13.569755] sd 0:0:0:0: [sda]
    [ 13.569757] Sense Key : 0xb [current] [descriptor]
    [ 13.569761] Descriptor sense data with sense descriptors (in hex):
    [ 13.569763] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 13.569771] 5e 89 08 c0
    [ 13.569775] sd 0:0:0:0: [sda]
    [ 13.569777] ASC=0x47 ASCQ=0x0
    [ 13.569779] sd 0:0:0:0: [sda] CDB:
    [ 13.569781] cdb[0]=0x28: 28 00 5e 89 08 c0 00 00 08 00
    [ 13.569789] end_request: I/O error, dev sda, sector 1586038976
    [ 13.569933] ata1: EH complete
    [ 13.583315] ata1.00: exception Emask 0x0 SAct 0x7fffff9f SErr 0x0 action 0x6
    [ 13.583360] ata1.00: irq_stat 0x40000008
    [ 13.583399] ata1.00: failed command: READ FPDMA QUEUED
    [ 13.583441] ata1.00: cmd 60/08:38:30:08:89/00:00:63:00:00/40 tag 7 ncq 4096 in
    res 41/84:08:30:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 13.585478] ata1.00: status: { DRDY ERR }
    [ 13.585516] ata1.00: error: { ICRC ABRT }
    [ 13.585558] ata1: hard resetting link
    [ 14.069688] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 14.180020] ata1.00: configured for UDMA/33
    [ 14.180069] sd 0:0:0:0: [sda]
    [ 14.180072] Result: hostbyte=0x00 driverbyte=0x08
    [ 14.180074] sd 0:0:0:0: [sda]
    [ 14.180076] Sense Key : 0xb [current] [descriptor]
    [ 14.180079] Descriptor sense data with sense descriptors (in hex):
    [ 14.180081] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 14.180089] 63 89 08 30
    [ 14.180094] sd 0:0:0:0: [sda]
    [ 14.180095] ASC=0x47 ASCQ=0x0
    [ 14.180098] sd 0:0:0:0: [sda] CDB:
    [ 14.180099] cdb[0]=0x28: 28 00 63 89 08 30 00 00 08 00
    [ 14.180108] end_request: I/O error, dev sda, sector 1669924912
    [ 14.180245] ata1: EH complete
    [ 14.190091] ata1.00: exception Emask 0x0 SAct 0x7fffffe3 SErr 0x0 action 0x6
    [ 14.190153] ata1.00: irq_stat 0x40000008
    [ 14.190193] ata1.00: failed command: READ FPDMA QUEUED
    [ 14.190237] ata1.00: cmd 60/a8:28:70:08:89/00:00:63:00:00/40 tag 5 ncq 86016 in
    res 41/84:a8:80:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 14.190290] ata1.00: status: { DRDY ERR }
    [ 14.190328] ata1.00: error: { ICRC ABRT }
    [ 14.190371] ata1: hard resetting link
    [ 14.676439] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 14.779168] ata1.00: configured for UDMA/33
    [ 14.779214] sd 0:0:0:0: [sda]
    [ 14.779216] Result: hostbyte=0x00 driverbyte=0x08
    [ 14.779218] sd 0:0:0:0: [sda]
    [ 14.779220] Sense Key : 0xb [current] [descriptor]
    [ 14.779223] Descriptor sense data with sense descriptors (in hex):
    [ 14.779225] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 14.779233] 63 89 08 80
    [ 14.779237] sd 0:0:0:0: [sda]
    [ 14.779239] ASC=0x47 ASCQ=0x0
    [ 14.779241] sd 0:0:0:0: [sda] CDB:
    [ 14.779243] cdb[0]=0x28: 28 00 63 89 08 70 00 00 a8 00
    [ 14.779251] end_request: I/O error, dev sda, sector 1669924976
    [ 14.779391] ata1: EH complete
    [ 14.793467] ata1.00: exception Emask 0x0 SAct 0x3fffffe0 SErr 0x0 action 0x6
    [ 14.793513] ata1.00: irq_stat 0x40000008
    [ 14.793554] ata1.00: failed command: READ FPDMA QUEUED
    [ 14.793597] ata1.00: cmd 60/08:28:28:08:89/00:00:63:00:00/40 tag 5 ncq 4096 in
    res 41/84:08:28:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 14.793651] ata1.00: status: { DRDY ERR }
    [ 14.793690] ata1.00: error: { ICRC ABRT }
    [ 14.793733] ata1: hard resetting link
    [ 15.279789] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 15.378218] ata1.00: configured for UDMA/33
    [ 15.378240] sd 0:0:0:0: [sda]
    [ 15.378243] Result: hostbyte=0x00 driverbyte=0x08
    [ 15.378245] sd 0:0:0:0: [sda]
    [ 15.378247] Sense Key : 0xb [current] [descriptor]
    [ 15.378250] Descriptor sense data with sense descriptors (in hex):
    [ 15.378252] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 15.378260] 63 89 08 28
    [ 15.378264] sd 0:0:0:0: [sda]
    [ 15.378266] ASC=0x47 ASCQ=0x0
    [ 15.378268] sd 0:0:0:0: [sda] CDB:
    [ 15.378269] cdb[0]=0x28: 28 00 63 89 08 28 00 00 08 00
    [ 15.378277] end_request: I/O error, dev sda, sector 1669924904
    [ 15.378427] ata1: EH complete
    [ 15.390101] ata1.00: exception Emask 0x0 SAct 0x7fffff SErr 0x0 action 0x6
    [ 15.390148] ata1.00: irq_stat 0x40000008
    [ 15.390188] ata1.00: failed command: READ FPDMA QUEUED
    [ 15.390232] ata1.00: cmd 60/08:00:10:08:89/00:00:63:00:00/40 tag 0 ncq 4096 in
    res 41/84:08:10:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 15.390285] ata1.00: status: { DRDY ERR }
    [ 15.390324] ata1.00: error: { ICRC ABRT }
    [ 15.390366] ata1: hard resetting link
    [ 15.876541] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 15.977410] ata1.00: configured for UDMA/33
    [ 15.977500] ata1: EH complete
    [ 15.986870] ata1.00: exception Emask 0x0 SAct 0x7f807fff SErr 0x0 action 0x6
    [ 15.986916] ata1.00: irq_stat 0x40000008
    [ 15.986957] ata1.00: failed command: READ FPDMA QUEUED
    [ 15.987000] ata1.00: cmd 60/08:b8:20:08:89/00:00:63:00:00/40 tag 23 ncq 4096 in
    res 41/84:08:20:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 15.987054] ata1.00: status: { DRDY ERR }
    [ 15.987093] ata1.00: error: { ICRC ABRT }
    [ 15.987135] ata1: hard resetting link
    [ 16.473350] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 16.576437] ata1.00: configured for UDMA/33
    [ 16.576509] sd 0:0:0:0: [sda]
    [ 16.576511] Result: hostbyte=0x00 driverbyte=0x08
    [ 16.576514] sd 0:0:0:0: [sda]
    [ 16.576516] Sense Key : 0xb [current] [descriptor]
    [ 16.576519] Descriptor sense data with sense descriptors (in hex):
    [ 16.576520] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 16.576529] 63 89 08 20
    [ 16.576533] sd 0:0:0:0: [sda]
    [ 16.576534] ASC=0x47 ASCQ=0x0
    [ 16.576537] sd 0:0:0:0: [sda] CDB:
    [ 16.576538] cdb[0]=0x28: 28 00 63 89 08 20 00 00 08 00
    [ 16.576546] end_request: I/O error, dev sda, sector 1669924896
    [ 16.576642] ata1: EH complete
    [ 16.586801] ata1.00: exception Emask 0x0 SAct 0x7fff803f SErr 0x0 action 0x6
    [ 16.586847] ata1.00: irq_stat 0x40000008
    [ 16.586886] ata1.00: failed command: READ FPDMA QUEUED
    [ 16.586928] ata1.00: cmd 60/08:78:50:08:89/00:00:5e:00:00/40 tag 15 ncq 4096 in
    res 41/84:08:54:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 16.586980] ata1.00: status: { DRDY ERR }
    [ 16.587018] ata1.00: error: { ICRC ABRT }
    [ 16.587058] ata1: hard resetting link
    [ 17.073307] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 17.175907] ata1.00: configured for UDMA/33
    [ 17.175963] sd 0:0:0:0: [sda]
    [ 17.175965] Result: hostbyte=0x00 driverbyte=0x08
    [ 17.175968] sd 0:0:0:0: [sda]
    [ 17.175970] Sense Key : 0xb [current] [descriptor]
    [ 17.175973] Descriptor sense data with sense descriptors (in hex):
    [ 17.175974] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 17.175983] 5e 89 08 54
    [ 17.175987] sd

    I have only Arch installed, 64 bit, UEFI boot.
    The things got worse for me. Today I barely managed to boot the laptop. It was throwing a lot of errors at me:
    Sep 24 06:13:59 kernel: ata6.00: irq_stat 0x40000008
    Sep 24 06:13:59 kernel: ata6.00: failed command: READ FPDMA QUEUED
    Sep 24 06:13:59 kernel: ata6.00: cmd 60/a8:00:40:0e:00/00:00:00:00:00/40 tag 0 ncq 86016 in
    res 41/84:a8:87:0e:00/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
    Sep 24 06:13:59 kernel: ata6.00: status: { DRDY ERR }
    Sep 24 06:13:59 kernel: ata6.00: error: { ICRC ABRT }
    Sep 24 06:13:59 kernel: ata6: hard resetting link
    Sep 24 06:13:59 kernel: ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
    Sep 24 06:13:59 kernel: ata6.00: configured for UDMA/133
    Sep 24 06:13:59 kernel: sd 5:0:0:0: [sda]
    Sep 24 06:13:59 kernel: Result: hostbyte=0x00 driverbyte=0x08
    Sep 24 06:13:59 kernel: sd 5:0:0:0: [sda]
    Sep 24 06:13:59 kernel: Sense Key : 0xb [current] [descriptor]
    Sep 24 06:13:59 kernel: Descriptor sense data with sense descriptors (in hex):
    Sep 24 06:13:59 kernel: 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    Sep 24 06:13:59 kernel: 00 00 0e 87
    Sep 24 06:13:59 kernel: sd 5:0:0:0: [sda]
    Sep 24 06:13:59 kernel: ASC=0x47 ASCQ=0x0
    Sep 24 06:13:59 kernel: sd 5:0:0:0: [sda] CDB:
    Sep 24 06:13:59 kernel: cdb[0]=0x28: 28 00 00 00 0e 40 00 00 a8 00
    Sep 24 06:13:59 kernel: end_request: I/O error, dev sda, sector 3648
    Sep 24 06:13:59 kernel: ata6: EH complete
    Sep 24 06:14:30 kernel: ata6.00: exception Emask 0x1 SAct 0x7fffffff SErr 0x0 action 0x6 frozen
    Sep 24 06:14:30 kernel: ata6.00: irq_stat 0x40000008
    Sep 24 06:14:30 kernel: ata6.00: failed command: WRITE FPDMA QUEUED
    Sep 24 06:14:30 kernel: ata6.00: cmd 61/08:00:00:08:24/00:00:41:00:00/40 tag 0 ncq 4096 out
    res 40/00:a8:87:0e:00/00:00:00:00:00/00 Emask 0x5 (timeout)
    Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
    Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
    Sep 24 06:14:30 kernel: ata6.00: cmd 60/a8:08:60:0f:00/00:00:00:00:00/40 tag 1 ncq 86016 in
    res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
    Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
    Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
    Sep 24 06:14:30 kernel: ata6.00: cmd 60/14:10:08:10:00/00:00:00:00:00/40 tag 2 ncq 10240 in
    res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
    Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
    Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
    Sep 24 06:14:30 kernel: ata6.00: cmd 60/01:18:24:0f:00/00:00:00:00:00/40 tag 3 ncq 512 in
    res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
    Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
    Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
    Sep 24 06:14:30 kernel: ata6.00: cmd 60/01:20:25:0f:00/00:00:00:00:00/40 tag 4 ncq 512 in
    res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
    Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
    Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
    Sep 24 06:14:30 kernel: ata6.00: cmd 60/01:28:26:0f:00/00:00:00:00:00/40 tag 5 ncq 512 in
    res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
    Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
    Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
    Sep 24 06:14:30 kernel: ata6.00: cmd 60/01:30:27:0f:00/00:00:00:00:00/40 tag 6 ncq 512 in
    res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
    Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
    Sep 24 06:14:30 kernel: ata6: hard resetting link
    Sep 24 06:14:30 kernel: ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
    Sep 24 06:14:30 kernel: ata6.00: configured for UDMA/133
    Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
    Sep 24 06:14:30 kernel: Result: hostbyte=0x00 driverbyte=0x08
    Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
    Sep 24 06:14:30 kernel: Sense Key : 0xb [current] [descriptor]
    Sep 24 06:14:30 kernel: Descriptor sense data with sense descriptors (in hex):
    Sep 24 06:14:30 kernel: 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    Sep 24 06:14:30 kernel: 00 00 10 08
    Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
    Sep 24 06:14:30 kernel: ASC=0x0 ASCQ=0x0
    Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda] CDB:
    Sep 24 06:14:30 kernel: cdb[0]=0x28: 28 00 00 00 0f 60 00 00 a8 00
    Sep 24 06:14:30 kernel: end_request: I/O error, dev sda, sector 3936
    Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
    Sep 24 06:14:30 kernel: Result: hostbyte=0x00 driverbyte=0x08
    Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
    Sep 24 06:14:30 kernel: Sense Key : 0xb [current] [descriptor]
    Sep 24 06:14:30 kernel: Descriptor sense data with sense descriptors (in hex):
    Sep 24 06:14:30 kernel: 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    Sep 24 06:14:30 kernel: 00 00 10 08
    Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
    and so on... It somehow booted, but now journalctl says:
    ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
    184 End-to-End_Error 0x0032 099 099 099 Old_age Always FAILING_NOW 1
    while the Error hasn't occured yet.
    I think I wil take the emergency procedure, and start backing up my files and system ...
    I don't recall when this error first showed up, and I unluckily deleted my journal before noticing the problem, for it was getting big, so I can't trace back. But I have it in the journal since then (11.september). At begining only from time to time, but now things are getting worse.

  • Restored 10.6 OS from CD and fails to Boot after Combo upgrade

    I have a clean install of Lion on my internal drive and an external clone of the HD from the previous Snow Leopard install. The Clone worked until I updated via the latest auto update. I have App's and other settings to transfer to Lion from this clone so want to get it working so I can ensure all the App's are upgraded to work on Lion or are deleted.
    After the external drive failed to boot I reinstalled the system from my Snow Leopard Install CD, not the 24-inch iMac (Mid 2007) restore CD.
    I then used Auto updater to install the combo and other updates to 10.6.8 this booted fine until I upgraded Safari 5.1 and Java - the last items that came up on the software updater. Upon restart, the boot failed in the last portion of the boot and at this point the Apple emblem went away and the round circle with diaginoal line apeared.
    On starting with the option key down, the clone disk 10.6.8 shows as being available, along with the internal Drive, for booting.
    Starting with "command + S" gets through to the last line of the process then states "waiting on Root"
    When compaired to a Snow OS that boots OK it is the last line of code before the curser is ready for entering a command.
    Can anyone tell me what to look for or how to repair this error so that I can get my data across to Lion. Thanks

    Well, in case anyone else has a similar problem I managed to fix the system by the following process:
    I reinstalled 10.6.0 from the retail Snow Leopard CD. The drive Booted OK but I needed to be upgraded to 10.6.8 to use the migration tool so I then upgraded using the Software Update utility. Boot failed again at this point and could not be fixed by anything I did.
    I then reinstalled 10.6.0 from the CD to try again, but the HD would not boot this time around.
    I downloaded CleanApp by Synium Software (http://www.syniumsoftware.com/cleanapp/) on a commendation from the famous eBook, "Take Control of installing Lion" by Joe Kissell of TidBits. I used this from my Lion HD to remove all orphan files, PPC files and Apps, and other junk. Snow Leapard still not Booting after repairs by various disk repair utilities including Apples.
    I Booted from my internal HD using Lion and ran SuperDuper to make a new Clone of the failed HD on a second external HD. Took a day and a night to run while I was at work, but the new clone would not boot at this stage so I ran SuperDuper again using the "Smart Update Backup" option. This just adds changed files or missing files to the clone. At the end of this process I had a running Clone that would boot on 10.6.0.
    I Booted from the second Clone and used the Software Update utility then to up grade in the two stages the Auto system used to bring my OS up to 10.6.8. This was successful and I had a Bootable Snow Leopard with no old Apps from which to Migrate my data.

  • 24" iMac Firmware

    After reading some troubleshooting posts on the forums regarding hums, etc. I decided to check to see if there were any available firmware updates.
    My firmware doesn't seem to match the most recent intel firmware updates on apple.com. However, the most recent updates are for iMac (early 2006), which have the Core Duo processors.
    I'm assuming they would ship a computer announced one month ago with the most recent firmware. If this is the case, the website should by updated.
    Can anyone tell me the correct firmware to run on the new 24" iMac?
    Mine says:
    Boot ROM Version: IM61.0093.B00
    SMC Version: 1.10f2

    I wonder whether there will be another category added, as I'm not sure the C2D's will use the same firmware as the CD's (core duos). I'm surprised they do not have a section indicating the correct firmware for the new iMacs yet though...I mean, people have been using them for a month.
    I also know that many 24" users have been having problems with bootcamp, and a lot of speculation has been going around about a possible firmware fix. They should at least indicate our firmware is up to date.

  • FaceTime on iMac says "failed"

    FaceTime on iMac says "failed". NOw this app worked fine about a week ago and now I need to work it doesn't. I hav ebeen through all the preferences and everything checks out. Whenever I call my wife, my Dad, my work colleagues it just says failed immediately. I haven't touched anything since last week and neither has anyone else. Time and date prefs are all ok and the "help" on the apple site is next to uselss. Its driving me bats. Anyone with any ideas?
    PS - I works fine on my iphone (5). I can call anyone and see them.

    Back up all data.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
    Step 1
    If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked
    Allow user to administer this computer
    Then reboot. You can demote the problem account back to standard status when this step has been completed.
    Triple-click anywhere in the following line on this page to select it:
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
    Boot into Recovery. When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password dialog will open. You’re not going to reset a password.
    In the dialog, select the startup volume ("Macintosh HD," unless you gave it a different name) if it's not already selected.
    Select your username from the menu labeled Select the user account if it's not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • Macbook Pro Fails to Boot on Operating System

    After Restarting My Macbook Pro 13" 2012 it repeatedly fails to boot up to Mac OSX but instead to OSX utilities. I tried to reinstall Mountain lion but it shows me that Macintosh HD is locked and when erasing it , it tells me couldn't umamount Disc. Any solution!!! Thank you

    Found a solution. As expected, I needed to restore the firmware. However by just downloading the firmware update, OSX didn't want to write the firmware as it was already up-to-date. OSX has no way to know up-to-date but defective.
    Found this thread:
    https://bugs.launchpad.net/ubuntu-release-notes/+bug/774089
    which lead to
    http://pubmem.wordpress.com/2011/04/09/flash-efi-firmware-update-manually-on-a-m acbook-51/
    that explains how to FORCE a firmware to be written.
    I had to download this free software
    http://www.macupdate.com/app/mac/16357/unpkg
    to unpack the EFI udpate downloaded at
    http://support.apple.com/kb/ht1237
    I would say that a good command line knowledge is needed to process the above steps.
    Hopefully I was able to find a solution before admitting that the logic board was defective and pay the 600$ for its replacement, as instructed by the genius at the Apple store. They are not allowed to process firmware restoration, but they should at least suggest it before proposing an expensive logic board replacement.
    Good luck.

  • Upgrade from snow leopard 10.6.8 to montain lion on a iMac system won't boot getting a crossed out circle

    Upgrade from snow leopard 10.6.8 to montain lion on a iMac system won't boot getting a crossed out circle

    Clean install OS.10.6.8 update it completly. May be you ignored some firmware update.
    I have two incedents.
    My thunderbolt port stopped working after upgrading to ML 10.8. I booted from external 10.6 , 10.7 still didnt work. Then i clean installed 10.6.8 and ran software update it updated the thunderbolt firmware and all is well now. This firmware update for some reason didnt show up in ML 10.8.
    Secondly , when i upgraded my Brother's Macbook from 10.5 to 10.6.3 it would install but stuck with crossed out circle. Then i downgraded checked for update found an efi update , then the 10.6.3 worked fine.

Maybe you are looking for

  • Link Sales Office to Company Code in FI (Aging Report)

    Hi, We are currently doing a centralization project where all sales and finance activities will take place from 1 location. This will result in using one single company code and 1 single sales organization with different sales areas instaed of 20+ co

  • ITunes/Quicktime problem "The older version of Quicktime cannot be removed"

    Whenever I try installing iTunes 7, I get the message "The older version of Quicktime cannot be removed." A similar problem with the same wording similarly cropped when I downloaded iTunes 6. Source of the problem is a failed System Restore which lef

  • How do I add several songs to a Slideshow?

    I Have iPhoto 8 and I'm creating a fairly lengthy slideshow. How can I add multiple songs from iTunes and control the order they play? Thanks.

  • Audio only 1-way

    Buddy of mine has iChat 3.x (presumably running Tiger) and I am running iChat 4.x, latest version in Leopard. We can do Video chats, we both see eachother. I can hear him, but the last couple of times he can't hear me. He gets other sounds from his c

  • SAPLMGD1  DYNPRO_NOT_FOUND

    Hi   Please help  i got an  ABAP Dump error  and DYNPRO_NOT_FOUND Problem : while creating MM02 transaction data , *SAPLMGD1  it's getting Runtime error and  DYNPRO_NOT_FOUND and the follwing below error descrition coming Short text      Dynpro does