Imac force display resolution

Hi,
I'm trying to send video to a CRT TV. I currently do it through an HDMI to S-Video adaptor but, no matter what video setting I use on the iMac, it is always out of proportion i.e. too narrow in width versus height. Is there a way to force the iMac to output standard NTSC 486 X 440 or 720 X 480?
Thanks

You really should use Apples Mini DVI to Video Adapter instead of going up to HDMI and then down to S-Video.
Apple no longer sell the Mini DVI to Video adapters at the on-line store, but they are still available at other on-line and retail stores.
Micro Center - Apple Mini DVI to Video Adapter M9319G/A
Amazon.com: Apple Mini-dvi To Video Adapter: Electronics

Similar Messages

How to force display resolution at 1280x1024, or any specific value?

I bought a KVM from aten, a cs-1764 DVI model, on which both my powermac G4 and G5 attached. The console monitor is Samsung 172x with native resolution at 1280x1024.
For both G4 & G5, the systems can detect my monitor as syncmaster and use its native resolution if I start the system from either box. But when I switch from another, for G4, I have to re-detect the display if I didn't start from that box, the system only knows it's a 1024x768 KVM monitor. For G5, it automatically detects syncmaster everytime but takes 5 seconds to be ready for use.
Is it possible to turn off autodetect feature at specific DVI output and force it to use resolution as designated?
regards,
Burke
PowerMac G5 Dual Mac OS X (10.4.7)

I have the exact same KVM and the same issuue with my powermac G5. I just tried SwitchResX and I don't think it helps. It can configure and fix a resolution for a particular monitor, but the problem with using the KVM, is that it thinks the monitor has been disconnected and so re-arranges the desktop. When you then switch back, it re-arranges it again to fit the 'new' display.
What is needed (I think) is a way to force the resolution of the machine to stay the same when the monitor is disconnected. My G4 and Intel Minis have no problem with this.
Any more ideas anyone?

IMac 24' Display Resolutions

I'm having an issue with my iMac 24' specifically with display resolutions. I have the 24' Penryn 2.8Ghz iMac with the ATI 2600 Pro video card.
The iMac is supposed to support the resolution 1680x1050. How do I know this? I had another iMac, the exact same model which supported this resolution. It was available in the Display preference pane on the previous iMac, but is not listed on this iMac. Apple also states in it's support documentation that 1680x1050 is indeed a supported resolution.
I've done everything to try to get this resolution working, I've reinstalled the OS, reset the PRAM and still no 1680x1050. At this point, I don't think the issue is software related but that is entirely guessing on my part.
As far as I can tell, this issue does not seem to be occuring solely on my iMac as I have checked several others and the resolution is not listed in System Preferences but I find this extremely as the previous iMac I had did have this resolutions.
I'm wondering if anyone else if having this problem or if they have 1680x1050 listed in System Preferences.
BTW, two highest resolutions I have listed are 1344x840 and 1920x1200.
Any help would be greatly appreciated.
Patrick
Message was edited by: losierp

losierp wrote:
The iMac is supposed to support the resolution 1680x1050. How do I know this?
I had another iMac, the exact same model which supported this resolution.
[Video Developer Note -- iMac|http://developer.apple.com/documentation/Hardware/Conceptual/HWTechVideo/Articles/Video_implementation.html#//apple_ref/doc/uid/TP40003994-SW301200331181]
According to the above document ([Table 6|http://developer.apple.com/documentation/Hardware/Conceptual/HWTechVideo/Articles/Video_implementation.html#//apple_ref/doc/uid/TP40003994-SW391200331181]), no 24" Intel iMac ever
supported 1680x1050 on the built-in display.
I can't find any detailed listing of supported resolutions on external monitors.
Looby

Force Display Resolution

I have a belkin Flip KVM switch hocked up to a PC and my Mac Mini.
I Have a 22 inch monitor connected to the KVM switch.
The problem Every time the Mac mini boots it detects the wrong resolution for the monitor if The monitor is connected to the KVM switch and the Monitor shows "Mode not supported"
If I attach the monitor directly to the Mini it detects the correct 1280 x 960 resolution.
Is there any way to force OS X to always use the 1280 x 960 resolution and not try to auto detect the display? This is in OS X 10.5.1, I never had the problem with Tiger.

Please post the output of 'xrandr'. Do you have the correct graphics drivers installed?

Windows 7 display resolution problem on iMac 27"

Hi, I have an iMac 27" that is running bootcamp with Windows 7. The resolution on the OS X is fine, but on the Windows 7 side, it is messed up. The display resolution choices make the screen look all stretched and weird; I cannot select the same resolution as I have on the OSX side. The display drivers say that they are generic, so I tried installing manufactuer's drivers. That did not work since they couldn't detect the correct monitor. I've run software update on he Mac OSX side, but to no avail. Does anyone know how to fix this? Thanks!

updates for osx will not affect windows
in osx one can make a packet with all drivers required for bootcamp windows do that
and if you need drivers for windows download the mobile version what amd/ati and nvidia call desktop videocards
are not the type used in imacs they use the laptop versions

27" iMac Display Resolution

I would like to find out which display resolution settings are the default on my iMac 27". Can anyone help me here? I got them set wrong somehow, and can't seem to get them back to where they were before I screwed them up

Thanks so much babowa.
That's the size listed at the top of my list also, but it doesn't depict if it is default setting or not.I'll use it for a while and see if it seems the same. I appreciate your response and help a lot.

How do I force a certain display resolution?

I've had this nagging issue with my Mac Mini both under Tiger and now Leopard where the display resolution is not quite right. I have it connected to a lower end Polaroid FLM-2601 LCD TV and use it function in my entertainment center as a home theater computer.
Now the problem is that the panel supports 1280x768@75Hz via VGA and 1360x768@75Hz via DVI. Now I can attach a monitor and get the resolution I am looking for via either VGA or DVI. Then I unplug the monitor and connect it to the TV and it works just fine at the supported resolutions. However, as soon as the Mac Mini sleeps or restarts it goes to odd resolutions or 74Hz and no picture is displayed. I tried this with an old PowerMac G4 and it just works right. The video chipset or driver in the Mac Mini seems to be the issue with this TV.
Is there some way to override Mac OS X and force a display resolution? Otherwise I end up with a very notchy experience.

I've had some luck with DisplayConfigX - google it. I've only ever used it under Tiger, though, not Leopard. Using it to drive a Vizio plasma screen at a resolution not typically shown under the Monitors control panel in Tiger.

How do I force a larger display resolution?

I have a MacBook with a native display resolution of 1280x900 or whatever it is. This is the laptop is use for work. When at work, I connect it to an external 1920x1200 display and it works great.
When I bring it home, I'd like to plug it into my home network and then use a VNC viewer on my home machine to see that same 1920x1200 screen. However, once I disconnect the MacBook from the monitor at work, the display reverts to its native size.
Obviously, I could either work on the MacBook directly, connect the MacBook to a monitor at home, or I could leave the MacBook at work and connect via VNC from home to work. Each of these solutions will not work for me.
Anyone know how to force MacOSX to make the desktop resolution an arbitrary size and not limited to the size of the display connected to it?
Thanks,
Jeff
MacBook Mac OS X (10.4.9)

Coming from UNIX, I was hoping this was just a question of forcing the "window manager" to have a certain resolution with a hacky command line command. Or hack some esoteric config file deep within MacOSX. Anybody know?

24" Imac only showing 2 display resolution options

Within the past week something changed after running a Mac software update that resulted in only having 2 display resolution options. The display choices now are limited to 1900 X 1200 and 960 X 600. I think this happened after having a Mac software update. I don't know what the updates were other then they were suggested as part of the automatic software updates check.
Running OS X Lion version 10.7.4.
Graphics = NVIDIA GeForce 7300 GT 128 MB.
I have rebooted and checked for additional updates put still only seeing 2 choices.
Is anyone else having this problem or ideas why all the other resolution options disappeared?
Thanks

Thanks for quick response. I looked as suggested but those listed are older issues and not recent new events. I guess I will sit back and see if there is a new update coming that fixes issue. Really madding not being able to re-set resolution to one that I have been using for years.
If anyone else knows background/input on why resolution options would go from at least if not more then 10 to now only having 2 would be great.
Thanks again.

MBA - Video display & resolution concerns

Hello!
My parents currently own an aging, first-generation white MacBook. I want to help them migrate to a newer laptop, possibly a MacBook Air aka MBA), within the next several months.
I used to own a 15-inch MacBook Pro (2007 vintage, IIRC) but it died on me in March. I was forced to buy a refurbished late-2012 iMac because money was too tight to procure a new laptop. I may also be looking at an MBA within a year, possibly an 11-incher.
I have a few questions about the video display resolution of late-model MBAs:
According to Apple's "tech specs" page for the MBA, the 11-inch is capable of multiple video resolutions:
1366 by 768 (native), 1344 by 756, and 1280 by 720 pixels at 16:9 aspect ratio; 1152 by 720 and 1024 by 640 pixels at 16:10 aspect ratio; 1024 by 768 and 800 by 600 pixels at 4:3 aspect ratio
I am a little concerned that a laptop display of that size would be a bit hard to read at the standard resolution of 1,366 x 768 pixels. Has anyone dialed the MBA's resolution back to lesser levels, like 1,280 x 720? Does anyone leave it at these lower resolutions? Also: how hard is it to use word processors or iPhoto on an MBA, particularly the 11-incher?

My parents...possibly an 11-incher.
Not to say your folks are old at all,... however Im likely much younger than them and having owned an 11" and now a 13",.... I cant go back to the 11" (though I loved it fine and sill can use it just fine)
Very likely their eyeballs would be more happy with a 13"
base model price on a 13" vs. an 11" isnt that much

Where did display resolutions go?

I just updated from 10.7.3 to to 10.7.4 on intel 24" iMac. In 10.7.3, I had a choice of 12 different display resolutions. In 10.7.4, I have 2 - neither of which I find acceptable, so I reintalled 10.7.3. Where did my choices go?
And how do I contact Apple directly without having to pay to tell them there is a problem with their update?
I was forced to switch to Lion so I could keep my contacts and calendars synced with all my Apple devices. Frankly, I've been an Apple user all the way back to the IIe. I don't like Lion. I don't like being forced to upgrade - if those items still sync with Windows XP, why can't they in Snow Leopard? I don't like that there is no easy way to contact Apple support about this. I don't like the snooty and less than helpful personel at my local Apple Store. Makes me wonder why I'm still an Apple user.

Two Windows scripts to make playlists of Duplicates and Exact Duplicates. Use shift-delete to remove selected tracks from the library as well as the playlist.
There is also my DeDuper script if you don't want to do it by hand. Please take note of the warning to backup your library before deduping. See this thread for background.
tt2

Judder using Mplayer... maybe force different resolution/refresh rate?

Hi!
(I posted this in the newbie section too, but this is maybe the most appropriate place??)
I've set up my computer as a media center using Freevo. As the main media player in Freevo I use Mplayer. The setup is working beautifully, but I'm getting some judder and it's a bit annoying. It's most noticable during bright, fast moving scenes.
So I've been trying to figure out how to remedy this, but it's harder than I thought. My setup is the following:
AMD 4200+ dual core, 2 gigs ram, Nvidia 7800GTX, 24" LCD and Pioneer LX508D plasma TV, and I'm using CoreAVC as decoder (amazing piece of software )
When I bought the 24" screen for my computer the sales guy (using windows) forced the resolution to 1920x1080. It looked a bit stretched, but if I could do this in Linux I'd avoid having parts of the picture missing on my TV. Now I have to use 1920x1200 resolution as main X session and since my TV is 1920x1080 parts of the desktop is out of view on my TV. This isn't too big of a deal though cause when playing movies they come out in 1920x1080. It'd be nice though to get the correct aspect ratio between my pc screen and my TV (I've been trying to use Twinview and clone, but it's impossible to use 1920x1200 on the 24" and 1920x1080 on the TV at the same time). I've tried to force my pc screen to use 1920x1080 (since it worked in windows it's supposed to be possible), but when I enable it through xorg.conf the screen goes blank. Using nvidia-settings doesn't give me the option of using 1920x1080 on the 24" at all.
So what I'm hoping to be able to do is to force the computer screen to use 1920x1080 and a refresh rate of 72Hz. This should eliminate alot of the judder and at the same time I won't have to use the "PC mode" on my TV (PC mode restrict the Hz to max 60Hz). Hopefully the TV will accept the 1920x1080 72Hz as any input and let me use the normal input (and then be able to use 72Hz... or 96Hz for that matter).
Anyone know how I might be able to do that? I'd really appreciate any help at all since this is the only thing that's not perfect with my setup.

Ok, I tried to change the xorg.conf file to 72Hz on the TV and it when black again. This is what the xorg.0.log shows:
X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.25-ARCH i686
Current Operating System: Linux arch 2.6.25-ARCH #1 SMP PREEMPT Mon Jul 14 15:25:51 UTC 2008 i686
Build Date: 21 June 2008 05:47:59PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 19 13:36:04 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Videocard0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "Xinerama" "0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81e0a60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(--) using VT number 3
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1002,5950 card 103c,2a24 rev 10 class 06,00,00 hdr 00
(II) PCI: 00:02:0: chip 1002,5a34 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:12:0: chip 1002,4379 card 103c,2a24 rev 00 class 01,01,8f hdr 00
(II) PCI: 00:13:0: chip 1002,4374 card 103c,2a24 rev 00 class 0c,03,10 hdr 80
(II) PCI: 00:13:1: chip 1002,4375 card 103c,2a24 rev 00 class 0c,03,10 hdr 00
(II) PCI: 00:13:2: chip 1002,4373 card 103c,2a24 rev 00 class 0c,03,20 hdr 00
(II) PCI: 00:14:0: chip 1002,4372 card 103c,2a24 rev 11 class 0c,05,00 hdr 80
(II) PCI: 00:14:1: chip 1002,4376 card 103c,2a24 rev 00 class 01,01,8a hdr 00
(II) PCI: 00:14:3: chip 1002,4377 card 103c,2a24 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:14:4: chip 1002,4371 card 0000,0000 rev 00 class 06,04,01 hdr 81
(II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 01:00:0: chip 10de,0091 card 10de,02c2 rev a1 class 03,00,00 hdr 00
(II) PCI: 02:01:0: chip 13f6,0111 card 153b,1144 rev 10 class 04,01,00 hdr 00
(II) PCI: 02:03:0: chip 10ec,8139 card 103c,2a24 rev 10 class 02,00,00 hdr 00
(II) PCI: 02:04:0: chip 1106,3044 card 103c,2a24 rev 80 class 0c,00,10 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:2:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000e000 - 0x0000efff (0x1000) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xfa000000 - 0xfcffffff (0x3000000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:20:3), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:20:4), (0,2,2), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[b]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xfde00000 - 0xfdefffff (0x100000) MX[b]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0xfdd00000 - 0xfddfffff (0x100000) MX[b]
(--) PCI:*(1:0:0) nVidia Corporation G70 [GeForce 7800 GTX] rev 161, Mem @ 0xfa000000/24, 0xd0000000/28, 0xfb000000/24, I/O @ 0xef00/7
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) PCI I/O resource overlap reduced 0x00004100 from 0x0000411f to 0x000040ff
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe0000000 to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xfdefe000 - 0xfdefe7ff (0x800) MX[b]
[1] -1 0 0xfdeff000 - 0xfdeff0ff (0x100) MX[b]
[2] -1 0 0xfe02b000 - 0xfe02b3ff (0x400) MX[b]
[3] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[4] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[b]
[5] -1 0 0xfe02e000 - 0xfe02efff (0x1000) MX[b]
[6] -1 0 0xfe02f000 - 0xfe02f1ff (0x200) MX[b]
[7] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[8] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[b](B)
[9] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[10] -1 0 0xfa000000 - 0xfaffffff (0x1000000) MX[b](B)
[11] -1 0 0x0000dd00 - 0x0000dd7f (0x80) IX[b]
[12] -1 0 0x0000de00 - 0x0000deff (0x100) IX[b]
[13] -1 0 0x0000df00 - 0x0000dfff (0x100) IX[b]
[14] -1 0 0x0000f800 - 0x0000f80f (0x10) IX[b]
[15] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[16] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[17] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[18] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[19] -1 0 0x00000500 - 0x0000050f (0x10) IX[b]
[20] -1 0 0x0000fa00 - 0x0000fa0f (0x10) IX[b]
[21] -1 0 0x0000fb00 - 0x0000fb03 (0x4) IX[b]
[22] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
[23] -1 0 0x0000fd00 - 0x0000fd03 (0x4) IX[b]
[24] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[b]
[25] -1 0 0x0000ef00 - 0x0000ef7f (0x80) IX[b](B)
(II) Inactive PCI resource ranges:
[0] -1 0 0x00004100 - 0x000040ff (0x0) IX[b]O
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xfdefe000 - 0xfdefe7ff (0x800) MX[b]
[1] -1 0 0xfdeff000 - 0xfdeff0ff (0x100) MX[b]
[2] -1 0 0xfe02b000 - 0xfe02b3ff (0x400) MX[b]
[3] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[4] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[b]
[5] -1 0 0xfe02e000 - 0xfe02efff (0x1000) MX[b]
[6] -1 0 0xfe02f000 - 0xfe02f1ff (0x200) MX[b]
[7] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[8] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[b](B)
[9] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[10] -1 0 0xfa000000 - 0xfaffffff (0x1000000) MX[b](B)
[11] -1 0 0x0000dd00 - 0x0000dd7f (0x80) IX[b]
[12] -1 0 0x0000de00 - 0x0000deff (0x100) IX[b]
[13] -1 0 0x0000df00 - 0x0000dfff (0x100) IX[b]
[14] -1 0 0x0000f800 - 0x0000f80f (0x10) IX[b]
[15] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[16] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[17] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[18] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[19] -1 0 0x00000500 - 0x0000050f (0x10) IX[b]
[20] -1 0 0x0000fa00 - 0x0000fa0f (0x10) IX[b]
[21] -1 0 0x0000fb00 - 0x0000fb03 (0x4) IX[b]
[22] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
[23] -1 0 0x0000fd00 - 0x0000fd03 (0x4) IX[b]
[24] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[b]
[25] -1 0 0x0000ef00 - 0x0000ef7f (0x80) IX[b](B)
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0 0x00004100 - 0x000040ff (0x0) IX[b]O
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfdefe000 - 0xfdefe7ff (0x800) MX[b]
[5] -1 0 0xfdeff000 - 0xfdeff0ff (0x100) MX[b]
[6] -1 0 0xfe02b000 - 0xfe02b3ff (0x400) MX[b]
[7] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[8] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[b]
[9] -1 0 0xfe02e000 - 0xfe02efff (0x1000) MX[b]
[10] -1 0 0xfe02f000 - 0xfe02f1ff (0x200) MX[b]
[11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[12] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[b](B)
[13] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[14] -1 0 0xfa000000 - 0xfaffffff (0x1000000) MX[b](B)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[17] -1 0 0x0000dd00 - 0x0000dd7f (0x80) IX[b]
[18] -1 0 0x0000de00 - 0x0000deff (0x100) IX[b]
[19] -1 0 0x0000df00 - 0x0000dfff (0x100) IX[b]
[20] -1 0 0x0000f800 - 0x0000f80f (0x10) IX[b]
[21] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[22] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[25] -1 0 0x00000500 - 0x0000050f (0x10) IX[b]
[26] -1 0 0x0000fa00 - 0x0000fa0f (0x10) IX[b]
[27] -1 0 0x0000fb00 - 0x0000fb03 (0x4) IX[b]
[28] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
[29] -1 0 0x0000fd00 - 0x0000fd03 (0x4) IX[b]
[30] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[b]
[31] -1 0 0x0000ef00 - 0x0000ef7f (0x80) IX[b](B)
[32] -1 0 0x00004100 - 0x000040ff (0x0) IX[b]O
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded by default.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 173.14.09 Thu Jun 5 00:07:40 PDT 2008
(II) Loading extension GLX
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "xtrap"
(II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DEC-XTRAP
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) NVIDIA dlloader X Driver 173.14.09 Wed Jun 4 23:47:25 PDT 2008
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset NVIDIA GPU found
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfdefe000 - 0xfdefe7ff (0x800) MX[b]
[5] -1 0 0xfdeff000 - 0xfdeff0ff (0x100) MX[b]
[6] -1 0 0xfe02b000 - 0xfe02b3ff (0x400) MX[b]
[7] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[8] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[b]
[9] -1 0 0xfe02e000 - 0xfe02efff (0x1000) MX[b]
[10] -1 0 0xfe02f000 - 0xfe02f1ff (0x200) MX[b]
[11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[12] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[b](B)
[13] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[14] -1 0 0xfa000000 - 0xfaffffff (0x1000000) MX[b](B)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[17] -1 0 0x0000dd00 - 0x0000dd7f (0x80) IX[b]
[18] -1 0 0x0000de00 - 0x0000deff (0x100) IX[b]
[19] -1 0 0x0000df00 - 0x0000dfff (0x100) IX[b]
[20] -1 0 0x0000f800 - 0x0000f80f (0x10) IX[b]
[21] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[22] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[25] -1 0 0x00000500 - 0x0000050f (0x10) IX[b]
[26] -1 0 0x0000fa00 - 0x0000fa0f (0x10) IX[b]
[27] -1 0 0x0000fb00 - 0x0000fb03 (0x4) IX[b]
[28] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
[29] -1 0 0x0000fd00 - 0x0000fd03 (0x4) IX[b]
[30] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[b]
[31] -1 0 0x0000ef00 - 0x0000ef7f (0x80) IX[b](B)
[32] -1 0 0x00004100 - 0x000040ff (0x0) IX[b]O
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfdefe000 - 0xfdefe7ff (0x800) MX[b]
[5] -1 0 0xfdeff000 - 0xfdeff0ff (0x100) MX[b]
[6] -1 0 0xfe02b000 - 0xfe02b3ff (0x400) MX[b]
[7] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[8] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[b]
[9] -1 0 0xfe02e000 - 0xfe02efff (0x1000) MX[b]
[10] -1 0 0xfe02f000 - 0xfe02f1ff (0x200) MX[b]
[11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[12] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[b](B)
[13] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[14] -1 0 0xfa000000 - 0xfaffffff (0x1000000) MX[b](B)
[15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[19] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[20] -1 0 0x0000dd00 - 0x0000dd7f (0x80) IX[b]
[21] -1 0 0x0000de00 - 0x0000deff (0x100) IX[b]
[22] -1 0 0x0000df00 - 0x0000dfff (0x100) IX[b]
[23] -1 0 0x0000f800 - 0x0000f80f (0x10) IX[b]
[24] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[25] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[26] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[27] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[28] -1 0 0x00000500 - 0x0000050f (0x10) IX[b]
[29] -1 0 0x0000fa00 - 0x0000fa0f (0x10) IX[b]
[30] -1 0 0x0000fb00 - 0x0000fb03 (0x4) IX[b]
[31] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
[32] -1 0 0x0000fd00 - 0x0000fd03 (0x4) IX[b]
[33] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[b]
[34] -1 0 0x0000ef00 - 0x0000ef7f (0x80) IX[b](B)
[35] -1 0 0x00004100 - 0x000040ff (0x0) IX[b]O
[36] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[37] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NoLogo" "true"
(**) NVIDIA(0): Option "TwinView" "1"
(**) NVIDIA(0): Option "TwinViewOrientation" "Clone"
(**) NVIDIA(0): Option "MetaModes" "DFP-0: 1920x1200 +0+0, DFP-1: 1920x1080_72 +0+0"
(**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "DFP-0"
(**) NVIDIA(0): Enabling RENDER acceleration
(**) NVIDIA(0): TwinView enabled
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce 7800 GTX (G70) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 262144 kBytes
(--) NVIDIA(0): VideoBIOS: 05.70.02.11.20
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 7800 GTX at PCI:1:0:0:
(--) NVIDIA(0): BenQ G2400W (DFP-0)
(--) NVIDIA(0): PIONEER_PDP. (DFP-1)
(--) NVIDIA(0): BenQ G2400W (DFP-0): 310.0 MHz maximum pixel clock
(--) NVIDIA(0): BenQ G2400W (DFP-0): Internal Dual Link TMDS
(--) NVIDIA(0): PIONEER_PDP. (DFP-1): 155.0 MHz maximum pixel clock
(--) NVIDIA(0): PIONEER_PDP. (DFP-1): Internal Single Link TMDS
(II) NVIDIA(0): Display Devices found referenced in MetaMode: DFP-0, DFP-1
(II) NVIDIA(0): Assigned Display Devices: DFP-0, DFP-1
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "DFP-0:1920x1200+0+0,DFP-1:1920x1080_72+0+0"
(II) NVIDIA(0): Virtual screen size determined to be 1920 x 1200
(--) NVIDIA(0): DPI set to (93, 95); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfdefe000 - 0xfdefe7ff (0x800) MX[b]
[5] -1 0 0xfdeff000 - 0xfdeff0ff (0x100) MX[b]
[6] -1 0 0xfe02b000 - 0xfe02b3ff (0x400) MX[b]
[7] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[8] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[b]
[9] -1 0 0xfe02e000 - 0xfe02efff (0x1000) MX[b]
[10] -1 0 0xfe02f000 - 0xfe02f1ff (0x200) MX[b]
[11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[12] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[b](B)
[13] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[14] -1 0 0xfa000000 - 0xfaffffff (0x1000000) MX[b](B)
[15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[19] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[20] -1 0 0x0000dd00 - 0x0000dd7f (0x80) IX[b]
[21] -1 0 0x0000de00 - 0x0000deff (0x100) IX[b]
[22] -1 0 0x0000df00 - 0x0000dfff (0x100) IX[b]
[23] -1 0 0x0000f800 - 0x0000f80f (0x10) IX[b]
[24] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[25] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[26] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[27] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[28] -1 0 0x00000500 - 0x0000050f (0x10) IX[b]
[29] -1 0 0x0000fa00 - 0x0000fa0f (0x10) IX[b]
[30] -1 0 0x0000fb00 - 0x0000fb03 (0x4) IX[b]
[31] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
[32] -1 0 0x0000fd00 - 0x0000fd03 (0x4) IX[b]
[33] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[b]
[34] -1 0 0x0000ef00 - 0x0000ef7f (0x80) IX[b](B)
[35] -1 0 0x00004100 - 0x000040ff (0x0) IX[b]O
[36] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[37] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): Unable to connect to the ACPI daemon; the ACPI daemon may not
(II) NVIDIA(0): be running or the "AcpidSocketPath" X configuration option
(II) NVIDIA(0): may not be set correctly. When the ACPI daemon is
(II) NVIDIA(0): available, the NVIDIA X driver can use it to receive ACPI
(II) NVIDIA(0): events. For details, please see the "ConnectToAcpid" and
(II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0): Config Options in the README.
(II) NVIDIA(0): Setting mode "DFP-0:1920x1200+0+0,DFP-1:1920x1080_72+0+0"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Initializing extension GLX
(**) Option "Protocol" "auto"
(**) Mouse0: Device: "/dev/input/mice"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "yes"
(**) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse0: Buttons: 11
(**) Mouse0: Sensitivity: 1
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "trustda"
(**) Keyboard0: XkbModel: "trustda"
(**) Option "XkbLayout" "no"
(**) Keyboard0: XkbLayout: "no"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) evaluating device (Mouse0)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(--) Mouse0: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
Could not init font path element /usr/share/fonts/Type1, removing from list!
My xorg.conf looks like this now (I don't know what values to use for HorizSync and VertFresh on my TV, the ones that are in there I just made up ):
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder63) Mon May 19 00:34:28 PDT 2008
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
Load "dbe"
Load "xtrap"
Load "extmod"
Load "record"
Load "freetype"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "trustda"
Option "XkbLayout" "no"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
Option "Emulate3Buttons" "yes"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "BenQ G2400W"
HorizSync 31.0 - 94.0
VertRefresh 50.0 - 85.0
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "PIONEER_PDP."
# HorizSync 15.0 - 80.0
# VertRefresh 23.0 - 60.0
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "G70 [GeForce 7800 GTX]"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 7800 GTX"
EndSection
Section "Device"
Identifier "Videocard1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 7800 GTX"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "NoLogo" "true"
Option "TwinViewOrientation" "Clone"
Option "TwinView" "1"
Option "TwinViewXineramaInfoOrder" "DFP-0"
Option "metamodes" "DFP-0: 1920x1200 +0+0, DFP-1: 1920x1080_72 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
I read somewhere that the TV is supposed to be able to show 1080p in 72Hz. But when I try that it goes blank. Maybe it has something to do with the monitor being 1920x1200 and the TV 1920x1080. The monitor won't accept 1920x1080 as resolution so I guess that can only be done in Windows...

Display resolution and Mac OS X 10.5.7

I am now using my Mac mini (early 2009) as my primary computer (new aluminum keyboard and an LG 23" LCD HDTV) and have sent the iMac Core Duo to "the boys" room for them to use. But they have called my attention to the display resolution a few times since I updated it to 10.5.7. The iMac seems to be lost as to what its default resolution should be. It was always set 1024x768, but that appears really tiny onscreen.
I also have noticed a large number of folks in the Mac mini (early 2009) forums complaing that after the update, they have lost the native resolutions they previously used with the mini and HDTVs when setup as a media center.
Has anyone here noticed resolution issues following updating to 10.5.7? Have you found a way to correct the issue?

Hi David
No problems here with the 10.5.7 update, the resolution on my 17" is and always has been set to 1440x900 Millions both before and after the update. +(1440x900 is the native res. for a 17" display)+
If I switch the iMac Display to 1024x768 Millions it makes everything larger and slightly blurred, again the same before and after the update.
Also note that the settings for my connect 27" Sharp flat screen TV are 1024x768 60Hz (NTSC) Millions was not affected in anyway. I always run my setup in Extended Desktop, but if I switch to Mirroring then both the iMac and TV Displays go to 1024x768.
Sound to me like it has something to do with selecting the Mirroring/(Extended Desktop)Mirroring Off feature...?
Dennis

Display resolution for 2014 MBP?

How do you adjust the display resolution to the "native" 2880 x 1800 on a mid 2014, 15 inch rMBP with NVIDIA Graphics?
I can not obtain a resolution above 1920 x1200.

Hello there, pf2555.
When adjusting resolution for your MacBook Pro Retina, the following Knowledge Base article offers some information on that regard:
Frequently asked questions about using a Retina display - Apple Support
How do I adjust the resolution of my Retina display?
MacBook Pro (Retina, 13-inch, Late 2012 and later) displays have a 2560-by-1600 native resolution at 227 pixels per inch with support for millions of colors.
MacBook Pro (Retina, Mid 2012) and MacBook Pro (Retina, 15-inch, Early 2013 and later) displays have a 2880-by-1800 native resolution at 220 pixels per inch with support for millions of colors.
iMac (Retina 5K, 27-inch, Late 2014) displays have a 5120-by-2880 native resolution with support for millions of colors.
If you need to adjust the display resolution, choose System Preferences from the Apple () menu. The Retina display offers scaled resolutions that allow you to have text and objects appear larger on screen, or to make them appear smaller which provides more space on screen. Note: Scaled resolutions do not offer the same visual quality as the Retina setting. Scaled resolutions may also impact graphics performance depending on which applications you are using.
MacBook Pro with Retina display (13-inch) scaled resolution choices
MacBook Pro with Retina display (15-inch) scaled resolution choices
iMac (Retina 5k, 27-inch, Late 2014) scaled resolution choices
Retina displays only use scaled resolutions rather than specific resolution settings like external displays. If you need to use a different resolution than those available on the built-in display, consider attaching an external display via HDMI or Thunderbolt.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

MacMini to iMac 27" Display

Can I connect an older Mac Mini (approx 2007) to a new iMac 27" display - I am about to purchase one but in doing so will be removing the PC/LCD monitor...
So what options do I have or is this a non-starter?

Which is why I suggested that I need the newer product:
Note for iMac 27" users only: Even our box is capable of passing high resolutions up to 1920x1200, users of iMac 27" will only be able to get picture with resolutions up to 1280x720 (720P). The reason for it is that iMac 27" native resolutions are: 800x600, 1280x720 or 2560x1440 (since our box is limited to single link (1920x1200), and can't work with 2560x1440 it will take the next resolution down the list which is 720p. *We are working on AT-DP400 which will allow dual link resolutions (such as 2560x1440) to pass though*. For PS3 or Xbox users, you can use our converter without additional devices at only 720p resolution. Make sure to set 720p prior connecting it to the DP200.

Imac force display resolution

Similar Messages

Maybe you are looking for