IMac freezing permanently (requires hard reset)

My parent's iMac has been freezing on them recently, after a fresh install of Snow Leopard.   It locks up, the beachball of death appears, and only a hard reset will get the computer running again.
I checked the kernal.log file and this is what I see for the time period of the freeze:
Jun 23 13:23:39 iMac kernel[0]: ** Device in slot: SLOT--1 **
Jun 23 13:23:39 iMac kernel[0]: ** GPU Debug Info Start **
Jun 23 13:23:39 iMac kernel[0]: 0x000094c8
Jun 23 13:23:39 iMac kernel[0]: 0x000000d6
Jun 23 13:23:39 iMac kernel[0]: 0x00000001
Jun 23 13:23:39 iMac kernel[0]: 0x00000018
Jun 23 13:23:39 iMac kernel[0]: 0x00009062
Jun 23 13:23:39 iMac kernel[0]: 0x00000001
Jun 23 13:23:39: --- last message repeated 1 time ---
Jun 23 13:23:39 iMac kernel[0]: 0x000094c8
Jun 23 13:23:39 iMac kernel[0]: 0x00000001
Jun 23 13:23:39 iMac kernel[0]: 0x00000015
Jun 23 13:23:39 iMac kernel[0]: 0x00000000
Jun 23 13:23:39 iMac kernel[0]: 0x00000001
Jun 23 13:23:39 iMac kernel[0]: 0x00000047
Jun 23 13:23:39 iMac kernel[0]: 0x00000000
Jun 23 13:24:24 iMac kernel[0]: 0x00002010
Jun 23 13:24:24 iMac kernel[0]: 0x00020000Jun 23 13:24:24 iMac kernel[0]: 0xc0034300
Jun 23 13:24:24 iMac kernel[0]: 0x88800000Jun 23 13:24:24 iMac kernel[0]: ** GPU Debug Info End **
Does anyone know what could be causing this and how I might fix it?
System Stats:
OsX 10.6.8
Model Name:          iMac
  Model Identifier:          iMac7,1
  Processor Name:          Intel Core 2 Duo
  Processor Speed:          2 GHz
  Number Of Processors:          1
  Total Number Of Cores:          2
  L2 Cache:          4 MB
  Memory:          2 GB
  Bus Speed:          800 MHz
  Boot ROM Version:          IM71.007A.B03
  SMC Version (system):          1.20f4
  Hardware UUID:          00000000-0000-1000-8000-001B63998AB7
ATI Radeon HD 2400 XT:
  Chipset Model:          ATI,RadeonHD2400
  Type:          GPU
  Bus:          PCIe
  PCIe Lane Width:          x16
  VRAM (Total):          128 MB
  Vendor:          ATI (0x1002)
  Device ID:          0x94c8
  Revision ID:          0x0000
  ROM Revision:          113-B2250A-207
  EFI Driver Version:          01.00.207
Intel ICH8-M AHCI:
  Vendor:          Intel
  Product:          ICH8-M AHCI
  Link Speed:          3 Gigabit
  Negotiated Link Speed:          3 Gigabit
  Description:          AHCI Version 1.10 Supported
ST3250820AS Q:
  Capacity:          250.06 GB (250,059,350,016 bytes)
  Model:          ST3250820AS Q                          
  Revision:          3.BQE  
  Serial Number:                      5QE42VFT
  Native Command Queuing:          Yes
  Queue Depth:          32
  Removable Media:          No
  Detachable Drive:          No
  BSD Name:          disk0
  Medium Type:          Rotational
  Partition Map Type:          GPT (GUID Partition Table)
  S.M.A.R.T. status:          Verified
  Volumes:
  Capacity:          209.7 MB (209,715,200 bytes)
  Writable:          Yes
  BSD Name:          disk0s1
Macintosh HD:
  Capacity:          249.72 GB (249,715,376,128 bytes)
  Available:          204.56 GB (204,558,282,752 bytes)
  Writable:          Yes
  File System:          Journaled HFS+
  BSD Name:          disk0s2
  Mount Point:          /

I ran the Extended Hardware Test 3 times, but there were no errors.   Any other ideas?   I'm coming up with squat while researching.
Edit: Apparently some people are reporting kernel error with Flash crashes.   Has anyone experienced this?   I updated their computer to the current version of Flash to see if this clears the problem up.

Similar Messages

  • Lion Hangs requiring hard reset

    Hi,
    I've looked through the forum and not seen this specifically mentioned..
    Is anyone else having issues with Lion whereby the whole system becomes unresponsive and has to be power cycled?  Since upgrading my Macbook pro and iMac this week and I've had to do it on both machines.
    I've seen this caused by Safari (2 occasions) and Finder (2 occasions).  On 3 of the 4 times Force quit didn't work and on 1 occasion Force Quit wouldn't even load!
    Since it's not a 'crash' I see no reports in Console and nothing explicit to report back to Apple - though I have submitted a feeback form on the subject.
    Anyone else seeing similar issues?

        Good morning Bomgart!
    I like to think being random is a great attribute. Sadly, not when it comes to a phone though. But fear not, because we've got a couple of solutions for one of our favorite couples.
    Now, there's no doubt that random dying is an illness that does plague a small minority of devices. But, there's a possibility that it may be due to the equipment itself or potentially something that was installed. Based on your description of things, you're up to date in software. And hard resets are a fantastic route to take when experiencing these issues. But, we want to isolate the problem. What I'm going to recommend is doing another hard reset http://vz.to/Sq8I9x . Only this time, test it out before you load on your applications. Also, you may wish to remove those which may not be entirely reputable (battery savers, task killers, etc.). Please let me know how that goes and while we're on the topic, which device does your girlfriend have with us? I've got you covered.
    EvanO_VZW
    VZW Support
    Follow us on Twitter @VZWSupport

  • Ipad 2 keeps requiring hard reset

    I am having a problem with the iPad 2 that requires me to do a hard reset to get the iPad to come back on. This has happened 3 to 4 times now and I've only had it roughly 3 weeks. Last night it was low on power (10%) and when I went to wake it up it wouldn't come on. I thought a process must have drained it so I put it on the dock and went to bed. I woke up this morning and it still would not wake up. I held the sleep and home button down for a few seconds and got the apple logo. When it came on it didn't charge although it's been charging on the dock all night. Anyone else seeing this happen with their iPad 2 on 4.3?

    Went back to the Apple store and this time the agent was able to do an normal diagnostics (which, by the way is pretty cool how they do it over the internet). The last agent that helped me couldn't run a proper diagnostics because 'the networ was down'. The diagnostics said I was running low on memory a lot and the agent looked at all the apps I had running in the background (lots!!) and showed me how to close them after no longer using them. But he also noticed that the time my iPad had saved for being used and sleeping were identical so he concluded it was a hardware issue and promptly exchanged the ipad! That was pretty awesome too. Overall I'm still very happy I bought an iPad

  • IPod requires hard reset after playing podcast with chapters

    I've noticed that I need to do a hard reset (hold down menu and select buttons for a few seconds) after my iPod goes idle after playing a podcast with chapters (the Ricky Gervais show).
    Anyone else have this problem?

    Can reproduce the problem on a 20GB 4G and 6GB mini
    with another podcast series with chapters
    (fortunately not many I listen to have caught up with
    chaptering).
    The odd behaviour I've noticed is that the Ricky
    Gervais podcast, for example, only has to be present
    on the iPod and never listened to for the iPod/s to
    lock up when they go to sleep. A hard reset then
    required to bring them back to life until the podcast
    has been listened to and the iPod/s then resync'ed
    with the mothership to then remove it (and restore
    some sanity until the next one).
    I did conduct a hard restart of my 10GB iPod with no success. The only workaround solution I've discovered is to use the "Convert Selection to AAC" under the Advance menu in iTunes while selecting the podcast. It converts the podcast to a new AAC file without chapters, and it plays fine on my second gen iPod. But now my library has 2 copies of each podcast, one for iTunes, one for iPod. Anyone else have any luck with the 10GB iPod? I guess it doesn't like the new podcasts with chapters.

  • Phone randomly dies requiring hard reset

    Does anyone else have this same issue.  My phone randomly dies and requires a hard reset.  It has happened to me twice in 10 days.  First time I thought that I had let my phones battery get to low but after putting it on the charger for an hour it would not power on using the button... had to hard reset.  Second time I am 96.3 % positive it had over 75% battery and it randomly died also requiring a hard reset.  I have an iphone5 32GB 6.1.3 version ios.  My girlfriend is having the same issue with her Droid so I know it is not just an iphone issue.  Verizon please respond.

        Good morning Bomgart!
    I like to think being random is a great attribute. Sadly, not when it comes to a phone though. But fear not, because we've got a couple of solutions for one of our favorite couples.
    Now, there's no doubt that random dying is an illness that does plague a small minority of devices. But, there's a possibility that it may be due to the equipment itself or potentially something that was installed. Based on your description of things, you're up to date in software. And hard resets are a fantastic route to take when experiencing these issues. But, we want to isolate the problem. What I'm going to recommend is doing another hard reset http://vz.to/Sq8I9x . Only this time, test it out before you load on your applications. Also, you may wish to remove those which may not be entirely reputable (battery savers, task killers, etc.). Please let me know how that goes and while we're on the topic, which device does your girlfriend have with us? I've got you covered.
    EvanO_VZW
    VZW Support
    Follow us on Twitter @VZWSupport

  • PLEASE HELP ME! IPAD 2 KEEPS REQUIREING HARD RESET!

    Ok, let me start out by saying this, I am 13 years old, so I can't just buy a new iPad 2 whenever I want. I am very fortunate to have one. But please help me.
    I feel like breaking down and crying. My iPad 2 keeps requireing a hard reset if I leave it alone for a while. Don't give me flak about being a little kid, or a wimp. Please. Just help me! PLEASE!!!!!!!

    iG3 wrote:
    The problem fixed itself since then. And no, I am not running pirated software, I am an Apple Developer. Thanks for your reply. That Post above was a little embarrassing.
    Then I assume as an Apple Developer, you had forgotten about the NDA that you had signed?
    Stedman

  • Mac OS X hanging randomly (namely freezing, needing a hard reset)

    Hi,
    I'll present my problem as straightforward as possible: ever since August 2nd (when I installed a number of updates, including Airport Extreme Update 2007-004 and Security Update 2007-007 Intel), my machine started to freeze needing a hard reboot quite often.
    It's not that my Intel MacBook Pro (one of the first ones) hasn't ever frozen as opposed to the PowerBook that worked smoothly no matter what happened, but I started to get concerned about it, especially when everything started to happen after the one before the last update.
    Usually the freezing happens when I'm plugging in USB headphones or playing a DVD or using my TV receiver with the laptop.
    In /var/log/system.log I notice quite a lot of:
    kernel[0]: AppleYukon: 00000000,00000000 skqueue - SkEventDispatcher - ignoring event queue, hardware is not responding
    ...which I find it's related to the ethernet card (which goes Inactive extremely often, needing a reboot to be activated again)
    and:
    AppleYukon: 00000000,0000ffff skxmac2 - ReadPhy - phy read error
    ...which I have no idea what it is.
    I'm also considering a hardware failure, and am trying to convince myself to go to the Apple Store and try to explain the situation, but thought that I'd better ask here first in case anybody else had the same problem and found a solution or at least an explanation.
    Do let me know if you need any further information.
    Cheers,
    Gabriel

    I've been having a similar problem with the same timeframe. Since applying the August 2nd update (including the Airport Extreme Update 2007-004), my MacBook Pro will not recover after entering sleep mode. I'm consistently forced to hard reboot it after it goes into standby mode. No amount of mouse clicking, trackpad tapping, button pushing, keyboard banging, etc. will convince it to resume from standby.
    If anyone has any suggestions for where I could possibly look for some error log information, etc. (I'm a recent convert from Windoze to OS X), I'd be very appreciative.

  • Iphone 4regularly requires hard reset

    I have encountered an annoying issue with my iphone 4. Recently it needs regular hard resets (3 times in 4days). Plugging into the mains results in no response. Plugging into computer the iphone remains blank but itunes give an error of 1600. My only option is pressing sleep/wake and home button at the same time. It then returns to working normally. It has been getting rather annoying as I assume my phone is on, but it has turned itself off.
    The phone is running 4.2.1 and has not been tampered with
    Has anyone else experienced this?
    Do you think if i go to my local apple store they would do anything about it?
    Do I have any other options.
    Any opinions would be welcomed
    Alfie

    Have you tried restoring the software, it is the first thing they will ask in the Apple Store.
    It can fix issues like this.

  • RAZR MAXX Required Hard Reset, Now Can't Access SD Card?

    Today, my GPS signal kept malfunctioning. This was unacceptable as I drive all over the place for work. I called Verizon support and they had me do a hard reset.
    After the hard reset, I set up my phone again and was unable to access the SD card. I entered my pin, and the following message showed up on my phone:
    SD Card Password Protection
    SD card has been secured by another device and cannot be accessed unless formatted.
    Tap "OK" and:
    SD Card Password Protection
    Failed to verify SD card security settings.  Encrypted content is not accessible.
    Tap "OK" and I'm taken back to the home screen.
    Is there any way to restore the SD card?  If not, how do you reformat the card to make it usable again? When I try to reformat it from the phone, the only option I have under "storage" is "Mount SD Card" which obviously does not work.
    Thank you.

        Hi DroidRAzrMaxx0111 - I appreciate you taking the steps to troubleshoot your original concerns and I apologize it had some unintended results! When going to Settings>Location & Security>Data Encryption, is "Storage" currently checked? Is "Encryption key type" greyed out? I look forward to working with you to restore the data!
    Thank you,
    YaleK_VZW
    Follow us on Twitter @VZWsupport

  • ICS required hard reset, now can't access 32GB SD card

    Saw message this morning that update 6.16.211.XT912 had been downloaded and was ready to install...said it would take 15 minutes...
    45 minutes later, the only thing I could get was emergency dialer.  Powered down, powered up same thing.
    Called tech support, tried powering on/off again and then told to hard reset.
    So after the hard reset, ICS is there and the phone is working....BUT I had encrypted my SD card (32GB) and now when I try to mount it get:
    SD Card Password Protection
    SD card has been secured by another device and cannot be accessed unless formatted.
    Click "OK" and see:
    SD Card Password Protection
    Failed to verify SD card security settings.  Encrypted content is not accessible.
    Click OK" and  back to settings screen!
    Is there anyway to tell the OS what the pin was/is?  If not, how do you reformat the card to make it usable again?  Does it need to be done off the Razr?
    Thanks in advance.

    Thanks to both poidude and b33 for the replies...but not seeing these options.  OS is 4.0.4 (ICS) and the phone is a Droid Razr...System Version that crashed the phone on install is 6.16.211.XT912.Verizon.en.US.
    When I Select "System Settings" from the Home screen (using the "hard button" on the lower left of the phone) I get a nice new ICS screen.  The first category is "Wireless and Networks", the second category is  "Device".  Under "Device" is "Storage".  Selecting "Storage" leads you to a screen with Major categories of  "Total Phone Storage",  "Application Storage",  "Internal Storage/MNT/SDCARD".
    Under this last category, there  is (after a storage utilization bar chart)  "Erase Internal Storage" , "Manage Internal Storage";
    If I select "Erase Internal Storage", I get  "This action will erase the internal storage on the phone.You will lose all the data on the internal storage";  There is a button "Format Internal Storage".  There is no option to separately format the SD card.
    What may be more relevant is that when the phone boots up, it tries to read the SD card and then displays the "SD Card Password Protection"  messages in my original post.  So the OS is trying to mount the SD, but because it was encrypted (and from what I have read, the encryption key was stored in internal memory, which got wiped when the Verizon rep had me do a factory reset!  There is no way to ever recover this data.  Have looked at Motorola and Droid forums on this...it is really bad.  DO NOT USE ENCRYPTION.  If your phone dies, your data is gone forever)
    The thing is, I cannot use the next major category under system settings, which is "SD CARD/ MNT/ SDCARD-EXT" which has only one option, "Mount SD Card"...if I try to mount the card, I get the same "SD Card Password Protection"  messages again!
    Can anyone who has inserted an SD card into a Droid Razr running 4.0.4. tell me if a brand new SD card is auto formatted?  Do you have to "mount" it first?  The current Verzion "help" shots are not for 4.0.4....ugh

  • ACE module hung and required hard reset !!Plz help

    ACE module had bit flip and it was hunged after that.I was not able to run any command(i.e For ex if i run show ft status nothing was displayed).I was not able to run any command on the standby ACE as well is this could be both the ACE module ACTIVE?
    Manuaaly reboot from the ACE did not work. I had to forced hardare reset from cat 6500.
    Is this a bug or strange behaviour?
    I am running ACE A2(2.3) version on the module.
    Thanks
    ALEX

    Usually in the case of the bit flip the ace will reset itself, which clears the problem.  In order to understand what is happining to your ACE, you would have to open a TAC case, and provide show tech information, as well as any files that were generated in the "core:" directory.  You can view these using the command "dir core:"
    It seems odd that the standby ACE also wouldn't respond to any command input.  Did you have to reset it as well? If you had to reset it as well, then it may have encountered the same conditions that caused the hang on the primary.
    Was there any syslog messages generated on the 6500 switch during the time?

  • HTC Incredible reboot fix that works and does NOT require hard reset

    Like many of you unfortunate souls out there I have had my HTC Incredible go into a rebooting loop over the last month or so. The following recounts some observations and and a solution which appears to work.
    First off, my son and I both have the same phone and software versions and apps. He does NOT get email on his phone because he does not want to. I do. His phone has NEVER rebooted. Mine has done so numerous times. My business partner also has the identical phone and software version, lives within 200 yards of me,  and uses the email and has had numerous reboots and has gotten them even sooner than I saw them at first. My partner and I have set up email attachments and downloads to go to the SD card. So much for background info. Here is what I did to fix the problem followed by some other observations:
    Open up the case of the phone and remove the battery
    Remove the SD card from the phone.
    Put it into an adapter that allows you to access files directly on your computer. In my case this was a Windows PC running Windows 7.
    Mount the SD card in your computer and open up the browser to see the files on the SD card.
    Look for a folder called ".Mail"
    If your phone is like mine you will see hundreds of files, some of zero length. This was even though I had deleted most of the emails I received on my phone.
    Proceed to directly delete any of the zero length files. For that matter, you may have other files like jpg's laying around of uncertain origin. I got rid of these and other strange files that seemed attached to no documents at all.
    Remove the SD card and reinsert into your phone. Put the battery back in and the cover on then restart the phone. Your phone should run properly and you should not see any negative consequences from the files you deleted previously.
    Some other observations relevant to this solution that bolsters my theory that this problem has something to do with the email application and also a problem with file system corruption on the SD card as a consequence of it.
    I had previously seen the email application put some mail from a different account I was using into my main account. The files could not be deleted and even trying to do so would cause the mail app to force close.
    My son has never seen the problem despite being in the same environment with the same phone and software. Relevant difference to me was that he was NOT using email and I was.
    The email app clearly has bugs if it is leaving behind hundreds of files even if you delete the emails. Why? As a software engineer my first instinct would be to look to see if the file system locks were properly synchronized when the email app is writing to the flash file system. I am not conversant in Android OS programming nor the app code itself so this is speculative on my part. I would also look for a timeout on reboots if file system enumerations take too long. Lots of files on a system might trigger a premature timeout and reboot. Once again, this is speculative on my part but I sure wish I had the code to debug this myself.
    These issues seem to coincide with a rapid rise in network traffic most likely because of the iPad 2/iPhone support by Verizon. I wonder if this additional traffic load on the network is opening up timing holes in the software because of backoff and retry intervals for certain apps. Once again I suspect the email app especially because it is vulnerable to network traffic issues as it tries to get email account updates.
    I could be wrong about my theory as to why the problem is happening. My solution seems to work. As far as pulling the battery and putting it near your AC in the car, that did NOT work for me at all. Leaving the phone out of its protective case also had no effect. Only screwing with the files on the SD card mattered.
    I hope this helps. 

    This problem has been seen for MONTHS now by people besides myself. My business partner is about to put a bullet in his phone because this has been happening for far longer than mine. I have little confidence in a fix anytime soon because this problem has been persistent for some time and there is a lot of denial in the field by Verizon. Verizon has to depend on HTC and Google besides themselves for fixes. How much would you like to wager on how this business relationship is working out? The first step in any solution is for a company to take some responsibility for it and so far no company has.

  • I have had FF 6.0.2 crash my PC (blackscreen, pc is frozen and unresponsive, requires hard reset) several times in the last two weeks. Ironically, it did this very thing while I was registering in order to ask about this.

    I also have had FF close and reopen with the little pop-up about restoring or starting a new session.
    I have been using FF since v1, and never have I experienced this issue.
    I do not know what other information to provide, but if anyone is willing to help, I will provide any necessary details.

    Having disabled hardware acceleration (Tools>Options>Advanced>Browsing), I have not had a crash although it has only been two days.
    Hopefully this fixes it and it will work for the others who are having the problem.

  • Re: msi 980 ti freezing issue, after hard reset no more freezing

    can you test the video card in another computer to isolate the issue
    and about VGA drivers version that you've tried, you didn't answer this

    Oki, i didn't see: OS: Windows 10
    The tool can't work there properly
    QuoteAnd when I booted the usb with manually added BI...

  • IPod Nano 4th Gen is stuck in a cycle of freezing; hard resetting only results in another instantaneous freeze.

    Hey, guys,
    I've had this iPod for a while (And, admittedly, I bought it secondhand- a few years ago. It's worked perfectly fine up until now), and just within the last week, it's begun freezing a lot, but it was nothing a hard reset (Lock -> Unlock -> Home+Center button) couldn't fix.
    Well, yesterday, the situation grew worse. Now, when it freezes and I hard reset it, the screen won't even make it past the Apple logo before becoming unresponsive again, 99% of the time. The only way I've found to counterract this is if I drain the battery completely, reset it, then plug it into my computer immediately afterward to restore the iPod. When there's nothing on it whatsoever, it won't freeze, but the moment I put pretty much any file on (That has been tested previously for freezing and works perfectly fine any time except for this), it freezes up again.
    Has anyone encountered this, or is it literally just me? Does anyone know of any other fixes I could do, or will I absolutely have to take it in for repair? If so, how much do you guys think it would be?
    Thanks,
    Ren

    i have tried all of that as well and im still stuck on the apple logo. i hit it against a table and everything. Does anyone know what to do?

Maybe you are looking for

  • How to open selected files from a listbox

    I am trying to open files from selected items in a listbox, but am having some problems. Here is my code: var firstLibrary = "C:\\Program Files (x86)\\Adobe\\test\\Library1.indl"; var secondLibrary = "C:\\Program Files (x86)\\Adobe\\test\\Library2.in

  • Xml format

    Hello all, I'm stuck at an output file, so I have my program generated the output file, I have everything in internal table itab. But I need to generate the output file in xml format. My question is do you know any function module doing the job? like

  • Accordion component property .enabled has no function???

    Hi, the subject pretty much sums it up. I created an accordion component, but setting its .enabled property - which according to the component help it has (inherited from UIComponent class) - has no effect!

  • Product cost planning & cost object controlling

    Hi All We are using KMAT material type for configurable materials. Product cost planning: My question is , Can we save cost estimate for the Kmat materials? ( I am assuming I dont have to run CK40N for these materails , As I am not going to have acco

  • Taxinn problem

    We are implementing ECC 6.0 with CIN.  We have configured ED and VAT related condition types in tax-procedure TAXINN.  We want to pull value of these condition type into pricing procedure. How can we do this?  Is it possible to pull these values into