IMac Freezing Up/Blue Screen

If this was posted in the wrong forum, please move.
Sunday evening, my iMac G5 started freezing up a lot. I was forced to keep restarting my computer. Originally, I thought it was due to Firefox 3 seeing how I just downloaded it a few days prior. I ended up deleting Firefox, but the problem only got worse. After looking online and trying such things as repairing the permissions, I gave in and did a disk install (while keeping network settings and files). Disc 1 install went fine, but everytime I tried to install the contents of disc 2, it would freeze. I decided to just attempt to do a full re-install losing all of my contents of my computer. Finally, while starting in Safe Mode, I was able to finish installing disk 2.
However, now I can't even get on my computer without it going to a plain blue screen (NOT the default wallpaper) and either the spinning pinwheel (I assume it was freezing up) or a curser. There wasn't any dock or any icons most of the time. Occasionally, it does take me to my default wallpaper, but it freezes up before the entire dock shows up.
Everything seems to work fine in Safe Mode, but trying to log into the normal mode always gets me to the blue screen or a frozen screen.
My S.M.A.R.T. said that it was verified. Meanwhile, through the install disk I have been in Disk Utility and I have ran a disk repair and repair permissions. The problems continues though.
I've presented my problem to another message board which had the general thought that my HD was dying and I was in need of a new one. However, I have conflicting reports as another person is saying that my HD is not dying, especially considering the S.M.A.R.T. was verified.
Right now money is tight, so I can't just easily go out and buy a new HD. So I'd like to try anything before giving into that. Any help would be greatly appreciated.
Details:
17-inch iMac G5 (Ambient Light Sensor)
1.8 GHz PowerPC G5 processor with a 17-inch screen
Owned since Sept 2005

Hello and Welcome to Apple Discussions ...
If you haven't tried this yet... grab your system restore disk(s). Make sure your Mac is shut down. Now, while holding down the C key, press the power button and insert the disk. Keep holding the C key until you see the Apple logo on the screen. Now, an Installer window will open... ignore that and go up to the Menu and click Utilities/Disk Utility. DU will launch. Select MacintoshHD in the panel on the left, make sure the First Aid button is selected and click Verify Disk. I'm not talking about the S.M.A.R.T status.. this is going to check to see if there are errors on the drive. If DU reports errors, click Repair.
Now, you can't use Disk Utility from the Application folder on the drive, you can only Verify and Repair the disk from Disk Utility on your restore disk(s). If Disk Utility reports errors but cannot repair them then you might want to look into a good disk repair utility such as DiskWarrior
www.alsoft.com or TechToolPro www.micromat.com Neither are expensive.
I understand how important your Mac is to you and I hope this helps.
Carolyn

Similar Messages

IMac Freezes on blue screen during startup after installing itunes 9.2

I let iTunes update to 9.2 today on my 27" iMac quad and when it restarted itself it froze on startup at the blue screen. The blue screen switches between two different shades but never exits that loop. I CAN boot in safe mode (which is what i'm doing right now).
Thus far i've tried:
- reinstalling itunes
- resetting my pram
- uninstalling itunes
- removing itunes startup app
I still cannot boot normally. Help!

You might try booting from your install CD and running disk repair in Disk Utility.

IPad Air with iOS 8.02 freezes and blue screen appears. What should be done ? Why is this happening ?

IPad Air with iOS 8.02 freezes and blue screen appears. What should be done ? Why is this happening ?

If nothing else works, you might try this one. It has worked for many others ...
Use iTunes to do a reset to factory default condition. Always be sure to do your backups before fiddling with your iPad. You might do both the iCloud and the iTunes backup, just to be sure!
Back up and Restore your iOS Device with iCloud or iTunes
http://support.apple.com/kb/ht1766
iTunes: About iOS Backups
http://support.apple.com/kb/ht4946
Use iTunes to Restore your iOS Device to Factory Settings
http://support.apple.com/kb/ht1414
Various issues from many different users have been solved by this. I've lost count on how many have been helped by this, so far. But, it doesn't mean EVERYONE will be helped, but I've seen a whole lot. You can only try and see ...
iPad 2 and iOS 8.0.2 Problems
For all iPad 2 owners, this is an important solution for you! These problems result from long-term use, continuous upgrades, corrupted files and various glitches that happen over this long term use. You just need to get your iPad 2 back to FACTORY FRESH CONDITION to start out clean!
Here's one person's solution which will help a lot of iPad 2 users!
keithfrommariettaOct 12, 2014 3:25 PM Re: IPAD2 very slow after IOS 8 upgrade
Re: IPAD2 very slow after IOS 8 upgradein response to pacoKAS
SOLVED: IOS 8 Issues on iPad 2:
I just returned home from a visit to the Genius Bar. Like you and many others, when I upgraded my iPad 2 to IOS 8, it became practically unusable. It was VERY slow, lagged whenever trying to to do anything. Lots of screen freezes and apps spontaneously crashing. I was convinced that the processor on the iPad 2 just couldn't handle the new IOS and I went in to see about restoring to IOS 7.
Thankfully, I was hooked up with a very sharp guy at the bar. The problem is not with the OS, it is with it being an *upgraded* OS. He used the analogy of when you had an older Windows computer and how over time (and over upgrades), they just tended to get slower and slower because of all of the garbage that was carried forward in the upgrades. At those times (and if you've ever had a Windows computer, you get this), the only thing that would speed it up would be to wipe the machine and do a fresh install of the current OS and then reload your apps, and the viola, everything would be fast again. Well, it turns out that IOS can suffer the same problems.
THE FIX: FIRST, be sure you have a current iCloud backup of your device. Connect your iPad to a computer that has a clean fresh copy of IOS 8 on iTunes (this is best done with a computer other than the one that you sync your device to because you DO NOT want to restore it from a back up just yet). Ideally, if you do this at an Apple store you'll be assured of the right version there and someone to answer any questions you might have along the way. You then hold the power and home button down to hard-reset the device and continue to hold them down until it reboots into recovery mode. You then follow the instructions on the computer to reinstall the OS on the device (which wipes everything from it and then reinstalls a clean copy of it). Once this is done (which only takes about 15 minutes), your device will reboot and ask you to set it up. Answer the questions about language, location, etc. and continue until it asks you to log into your iTunes account. Once you do that, it will ask if you want to either 1) Set it up as a new device, 2) Restore from iCloud, or 3) Restore from iTunes. Choose (2), restore from iCloud. This will ensure that it brings down "clean" copies of all of your apps and preferences rather than the potentially corrupted ones that might reside in your iTunes backup. That's it! It will take a few hours depending on how much data and apps you have, but I am happy to report that my iPad 2 is now running IOS 8 and it's running as fast as it ever did when it was brand new!
To sum it up, this process 1) Wipes your device and the garbage causing your problems, 2) Loads a clean and bug-free version of IOS 8 to your device, and 3) restores your apps and data so that it looks just like it did before the wipe, with the exception that it works now! :-)
Note also that by following this process you don't have to go through the painful and laborious process of reloading all of your apps, data and/or settings. iCloud takes care of all of that for you.

IMac Freezes Periodically During Screen Saver Only

I own a late-2006 Intel-based iMac. Over the last few months, I've noticed that the iMac freezes when the screen saver is running. This doesn't happen all the time, and it doesn't matter what screen saver I use. (None of the screen savers is a third-party.) The iMac doesn't freeze at any other time.
Any ideas?
- Keith
P.S. I'm running Snow Leopard right now, and it happens even with Snow Leopard, just as it did with plain ol' Leopard.

Your iMac has a dedicated Graphic's chip (GPU), while some of the Late 2006 17" iMacs had a GMA 950 graphics processor with 64MB of DDR2 SDRAM that shared with the main memory. To check which Graphic's chip you have go to: Apple > About This Mac > More Info and in the Hardware section select Graphics/Display.
If you would like to monitor the temperature of your GPU, CPU, HD and Memory check out the iStat Pro widget > http://www.islayer.com/apps/istatpro/
The main reason I suspect the lack of RAM over an overheating GPU is because you only reported a problem with the Screen Saver and not with other intense graphic's like movies, videos or games.
Please let us know how you make out with the RAM upgrade.
Dennis

Imac frozen at blue screen after i went into disk utilities and cleaned my free space. I tried holding down T key as it reboots and i get a message. Start up disk full empty it how can one emptie it if you cant get past the blue screen

Imac frozen at blue screen after i went into disk utilities and cleaned free space.
I tried holding down T key as it reboots
and i get a message. Start up disk full empty it how can one emptie it if you cant get past the blue screen?
to make matters worse we bought the IMAC of amazon uk on the 4/07/011 so what can we do?
please remember how frustrating it is when asking for help when the helper telling you to type something on the screen when its frozen
Tell us when you can type some instuctions to the software how do you get to the doss prompt so to speak to do this
Thanks

i tried all this thanks
i can not get past blue screen and message Your disk is full it needs to be emptied Please not I cant proceed past this message.
no matter what you tell me
Am i right ok in thinking that
when i went into disk utilities and chose to clean my free space i left it over one hour to do its stuff
i came back and there was no progress bar just the box so i quit the program and when i opened mac mail the system just froze i forced quit mail rebooted and blue screen death
Now when free space is being cleaned is it the same as windows dose the utility write lots of 0 on the hard drive then rebbot its self to free the space
basicly is my hard drive full of 00000 is this why im getting this message because the process was interupted
I need to know if i need outside help i bought the computer on line on amazon uk what dose one do next

Imac shows super weird lines on screen during start up and then freezes at blue screen (WITH PHOTO)

My Imac froze earlier today as I was dragging an image from safari into indesig and when it froze the weirdest pattern overlaid the screen. It looked just like the opacity pattern from photoshop with grey and white squares. I turned the computer off using the power button and unplugged everything.
Now when I try to start it these weird lines appear on my start up screen (see link)...
http://meijerladdaruppgrejer.wordpress.com/2012/07/24/oops/
as you can see the apple and the wheel appears as normal...
... then it moves to a normal looking white screen (perhaps a bit greener than usual) and around 30 seconds later freezes at the blue screen.
I've tried the cmd + alt + p + r several times but it won't help.
If i press alt during start up I can see and choose my hard drive but just end up at the blue screen again.
Can I try starting it up in safe mode or something?
Thanks! Any input is welcome.

Is this the same problem? Verical Lines" seems a bit diffuse. I've seached for a similar question and found a lot of other types of lines and stripes.
Could this be a solution?
http://support.apple.com/kb/TS3824?viewlocale=en_US&locale=en_US
If so, how do I install the update if I can't get passed the blue screen? Can I start my Imac in safe mode? How?
iMac (Mid 2011): Unresponsive white screen on startup or vertical lines on screen
Symptoms
In certain circumstances, your iMac (Mid 2011) may become unresponsive on startup, with a white or gray background on the display. You may also notice vertical lines on the display while using your iMac.
Resolution
Install the iMac Graphics Firmware Update 2.0 if your computer exhibits these issues. To install the update, chooseSoftware Update from the Apple () menu and follow the onscreen instructions.
Important: Do not interrupt the power to the computer while the update is installing. After the update is finished installing, you will need to restart your iMac.

Freezing with blue screen & can't boot from single user mode or disk

My keyboard is wired and plugged directly into my Intel iMac running OSX 10.5.8. I do not have the Leopard disks, but I do have the Tiger disks. I was trying to boot in single-user mode so that I could run AppleJack to try to fix another issue I'm having--I get the light blue startup screen flashed at me several times daily for the past week or so. When the blue screen flashes, it totally freezes my computer (obviously) and lasts from 1-10 seconds. I can't find anything that is triggering it. I haven't installed anything new that I'm aware of, and it happens whether the computer has previously been slept or not. I'm also not using an external display / additional monitor.
Also, for anyone who is nice enough to answer, please explain everything--I'm not an expert user.

Well since it is so time consuming and a security risk to turn off FileVault, I was hoping to hear from someone with more experience if this was the solution, or just something to "try"? Are you speaking from experience or just making a suggestion, leroydouglas? Thanks.

IMac freezes plus pixelated screen when restarted.

My iMac has been freezing and when I restart it the screen goes into black & white pixels after the grey start-up and blue screens. If I soft boot and hold down the D key when starting it works okay. Any ideas? I have an iMac 2.46HZ Intel Core 2 Duo 4GB 667 MHz DRR2 SDRAM. Please keep any help as simple as possible since I'm not very tech savy. Thanks!

I think it's a GPU issue. GPU problems appear and disappear, so I'm not surprised that your iMac sometimes works correctly.
I recommend you to take the iMac to an Apple Store or reseller. The GPU is soldered onto the logic board, so this may be an expensive repair

Imac G5 17" blue screen, grey screen, post-it notes...

Hi guys, some more iMac fun and games for you...
My dad has got a 17" iMac first generation (EMC: 1989). It's had Leopard (version 10.5.8) installed for the last 6 months. Yesterday when he was using it, some of the graphics started having vertical lines through them, the computer slowed and the coloured spinning wheel appeared. Force-quit wouldn't work and so holding the power button shut it down. Then, whenever he would startup, the screen would go to grey with apple logo and spinning wheel, then go to the blue screen, then the blue would slightly change colour and there it would stay...
So, I've tried all kinds of 'fixes' from the 'applicationenhancer' thing from single-user mode etc (didn't exist on the iMac). I've re-set PRAM, the SMU. I've unplugged power, discharged power, left off over night etc. I have also run fsck from single-user mode.
It will boot in single-user mode but won't boot in safe mode. It won't boot from a CD, even when holding down option and choosing the CD to boot from. However, target-mode does work and I have transferred off some of his files. In target mode, I have also successfully used disk utility to repair disk. All this to no avail. Blue screen trick happens every time.
Interestingly, when I did try to boot from Macintosh HD via starting up holding option key, instead of going blue screen, it went black screen but with occasional vertical lines of colour, sometimes faint, slightly moving mysteriously.
This morning when trying again, it actually reached the main home screen, with the programme shortcuts in the dock etc - although these were whited / blued-out and displaying the mysterious vertical lines through them (interestingly, the 'shadow' of these icons seemed to be displaying colours properly as per screenshot). The rest of the screen was black including the 'top line'. When I did a spotlight search for disk utility, it actually found it and this seemed to be displaying normally (see screenshot). Then the spinning wheel appeared and I had to hold power to shut down again.
Then today, having opened up the iMac and run through Apple's troubleshooting for when an iMac doesn't turn on, LED 1 lit up when plugged in. Then when starting up using the button inside the iMac, LEDs 1,2 and 3 all lit up. When I looked at the screen, the second screenshot revealed some 'post-it notes' across the screen. Bizarre!
I'm thinking this means a corrupt hard drive or hardware somewhere, but any hints gratefully appreciated. Thanks for your time!!
I haven't yet had chance to hook up an external monitor, am ordering an apple adapter lead to check that.
Steve
http://zerofour.pwp.blueyonder.co.uk/iMac/blackscreen.jpg
http://zerofour.pwp.blueyonder.co.uk/iMac/postits.jpg
Message was edited by: Steve Hayes1

Took it into the Apple Store Genius Bar yesterday and very helpful. Yours was the right diagnosis. The logic board needs replacing. They hadn't seen the 'post-it' note effect before. The iMac successfully started up from a firewire hard drive with Leopard, using the 'option' key on startup. However, there were some artifacts on screen (trails) as the Apple Store guy dragged the 'about this computer' around the screen. No dead pixels, so very sure this is a graphic card issue at minimum, possibly something wrong with the OS booting up as well, as this doesn't apparently work off the hard drive, despite being accessible by target mode. Cost will be £350 ($560 US) to fix, or £200 from a third-party supplier. Seems I may get a new iMac instead. So, thanks very much. Hope I can be of help to someone else on here. Happy holidays.

Macbook pro keeps freezing or blue screen of death

I got my mackbook pro in april,all rammed up etc.I bought this laptop just to play poker on.Poker programs only work with windows[but knew about bootcamp,i'm running XP on it].The problems i'm having ,is that, once a day at least it shuts down itself[and cant tell me the driver problem blue screen of death] or secondly just freezes and then i have to power it off for it to work again.
I have took it to genius bar,which couldnt help[they said it was on windows so nothing to do with them,just reinstall windows again,GREAT HELP}.
Been to 2 diffrent computer repair shops,and none of them have been able to fix this problem.
Anyone help,as its costing me a fortune,and still not working.
thanks in advance
scott

Hey, I recommend backing up all your files manually via USB hardrive and then format your mac's hardrive, here's a link for instructions on how to format your mac's hdd: http://computers.tutsplus.com/tutorials/how-to-format-your-macs-hard-drive--mac- 53986
Also I recommend downloading the latest Mac OS X via the app store. The reason why I've recommended to back up all your files and programs manually and install a clean and new os is because when you put your data on manually, you significantly reduce the chances of the problem happening again and it looks like you have something inside your os that's slowing everything down. You'll also have the latest updates and support if you download the latest mac os x. You should also back up your Mac via time machine as well so you have a image of your OS. I recommend installing a SSD drive inside your MacBook as they make a huge difference in performance, your computer will preform almost instantly, it only takes 7 seconds for your mac to boot into the os and everything else you do is pretty much instantly. They can be a little expensive but they're coming down in price and they're with it! http://www.amazon.co.uk/Crucial-CT480M500SSD1-2-5-inch-480GB-Internal/dp/B00BQ8R HJ2
I've had the same problem before and I hope that helps.
Good luck

After change the file access option 'No Access', I cannot start up my iMac. Only blue screen!

Hi experts,
I really need help.
I have several user accounts in my iMac G5.
Some reason - I don't know why I did - I went into the 'get info' of the Mac hard drive, and change the permission to the hard drive from 'Read and Write' 'to 'No Access' for the one of the user accounts.
After that, I switched the user as the one I just changed 'No Access'. But I couldn't do any action in that user space, like opening finder, starting any program.
So I re-started the computer and since then, I only see the blue screen (no arrow no nothing.).
I tried booting with Safe Mode, but still only show blue screen.
I tried booting with single user mode, still blue screen.
I can start up with the disk but couldn't restore the HD since there is no time point at all that I can go back.
What should I do? Please help me~

I tried booting with single user mode, still blue screen.
Changing permissions an a user account should not cause single user mode to fail. You changed permissions on something else. Could you provide more info on the folder you changed?
Some reason - I don't know why I did - I went into the 'get info' of the Mac hard drive, and change the permission to the hard drive from 'Read and Write' 'to 'No Access' for the one of the user accounts.
This is a little confusing. We need to know what folder you changed.
You might try Disk Utility repair permissions. Here is how to get into Disk Utility from the startup disk.
You can also get into the Terminal. Notice terminal is on the pull down. Check permissions on the root directory
mac $ ls -ld /
drwxrwxr-t   51 root admin    1K Dec 31 1969 /
mac $
verify & repair your startup drive
To verify & repair you file system on the startup drive, you will need to run disk utility from you installation DVD.
This article will tell you how to get to disk utility. Once in a disk utility, you can go and attempt to recover the disk.
http://support.apple.com/kb/TS1417
To repair your startup drive, you will need to run disk utility from your startup DVD.
Mac OS X 10.4: About the utilities available on the Mac OS X 10.4 Install DVD
http://support.apple.com/kb/HT2055
How to run disk utility from your startup DVD.
Insert your startup DVD into your reader. Power down your machine. Hold down to the c key. Power on your machine. This will bootup your startup DVD.
This will bring you to a panel asking you for your language. Pick your language.
You you come to the Install Mac OS panel. Do not install.
Click on Utilities menu item. This will give you a pulldown list of utilities.
Click on the disk utility.
You are now in disk utility. Pick your disk. Click on repair it should be on the lower right of the panel.
Once the repair completes successfully, you should update your permissions.
Verify a disk
As an alternative, you can verify that the filesystem on the disk is correct. You will not be able to repair the file system.
I suggest that you use disk utility to verify that your startup disk is OK.
Macintosh-HD -> Applications -> Utilities -> Disk Utility
Start up disk utility. On the left pane view, you will see a list of all your disks.
Click on your startup disk.
Click on the First Aid Tab.
Click on verify.
Hopefully your disk will verify. If not, you have to boot from your installation DVD and run Disk Utility from there to attempt to repair your file-system.

Imac stays in blue screen or grey apple screen at launch

This entire week my Imac won't start up normal.
When I turn it on eith the power button it won't get past the grey apple screen or when it does it wil stay in the blue screen.
When I turn the Mac off with the power button and then turn it on again it works normal.
What can I do?

You might first want to check the SMART status of your hard drive:
http://docs.info.apple.com/article.html?path=Mac/10.5/en/8733.html
Considering the age of your Mac, you could also have a failing PRAM battery. The process of replacing that is considerably more challenging.
http://www.ifixit.com/Guide/Repair/Installing-iMac-Intel-20-Inch-EMC-2133-and-22 10-PRAM-Battery/994/1

My MBP 15 inch can't switch off (freeze at blue screen with spinning wheel)

Whenever i try to "shut down" my MBP, it will freeze at the blue screen with the spinning wheel (that keeps spinning like 'eternally')! Any idea how to solve the problem?
I tried booting from the installation disk and repairing disk with "disk utility" but to no avail. Have also tried repairing disk permissions... Any idea how else should i tackle this problem?
Currently i can only switch off my MBP by holding the power button (forcing it to shut down)...
Please help Thanks!

Launch the Console application by entering the first few letters of its name into a Spotlight search, and select "system.log" from the file list. Enter "BOOT_TIME" (without the quotes) in the search box. Note the times of the log messages referring to boot times. Now clear the search box and scroll back in the log to the time of the most recent boot when you had the problem. Look for error messages in the minutes before that time, and post them here -- the text, please, not a screenshot. Edit out excessive repeats, if any. Do the same with kernel.log.
If the logs don't go back far enough in time, scroll down in the Console file list to /private/var/log/system.log.0.bz2 and /private/var/log/kernel.log.0.bz2. Search those archived logs, and if necessary the older ones below them, for the same information.
Also in Console, look under System Diagnostic Reports for crash or panic logs, and post the most recent one, if any. For privacy’s sake, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please do not post shutdownStall or hang logs -- they're very long and not helpful.

IMac stuck at blue screen, then finder

Hi, I've searched for the forums for this answer but haven't found anything. Sorry if this has been discussed already.
I'm a user of a 24' white iMac with 2.16 GHz, 300 GB HD. I have 4GB of RAM installed from OWC.
Early last week I started having problems with my iMac. Nothing specific, just a general slowdown and stutter in programs that should have run fine. Things like typing for 5 seconds and waiting for it to show up, scrolling in iTunes would sometimes hesitate, etc etc. The strange thing is I noticed no substantial slowdowns in heavier programs like WoW, Photoshop and Aperture.
I ran Onyx maintenance on it with no real discernible difference.
Today I returned from a weekend of non-use, and when I tried to start it up it got stuck on the blue screen after the grey startup screen. I tried a safe boot, but for whatever reason it didn't recognize my keyboard and was still extremely slow. I finally got it to boot up normally, but it didn't load any desktop items, dock, or anything else. It just showed the finder bar. I clicked on all the available bars (finder, file, edit) with no response.
Any ideas on how to go about troubleshooting this problem?
Thanks in advance!

It sounds like it might be a problem related to the hard drive, with three possibilities.
(1) It is too close to being full - Mac OS X needs free space on the startup drive.
(2) There is disk directory or other type of data corruption/error.
(3) The hard drive is becoming faulty.
If you are able to start up and operate the computer, back up at least your personal data, if it is not already, before doing anything else. If the problem is (1), move or delete some data so that you have at least 10% of total capacity as free space.
Otherwise, restart from your Mac OS X installation disc (for the installed system). Note if it is running normally when you are booted from another disk. At the first Installer screen, go up to the menu bar and select to run Disk Utility under Utilities. Use +Repair Disk+ on your internal drive. Note if any errors are reported, and if any are reported, if they are repaired.

IBook G4 Freezes at Blue Screen During Startup.

iBook G4 933 MHz
Mac OS X 10.4. Tiger
640MB RAM
40GB internal ATA hard drive
Computer boots but then quickly locks up.
If I immediately restart, then the iBook hangs at the blue screen before the Mac OS X progress screen appears.
If I remove the battery and unplug the power cord then allow the computer to sit for at least 30 minutes, able to fully boot, but then the machine quickly freezes up.
I assume the problem is heat related?
I have so far:
- Totally disassembled/reassembled
- Reset PRAM
- Reset NVRAM
- Reset PMU
- Unable to do target disk mode
- iBook freezes same way when booting to Mac OS X install DVD
Able to boot to shell command line mode no problem.
FSCK reports no issues with the HDD.
Sometimes during startup a fan turns on briefly, but not every attempt to boot.
Yes-- I know about the 'solder' issues with iBook G4 logic boards, but I do not think the above is related. The VGA works fine.
Thanks for any assistance that can be rendered.

After a month, I have been notified by Superior Reball that the logic board has been repaired. I promptly made payment of $35 and the board was shipped back to me on June 17 via USPS Priority Mail Delivery Confirmation. I have received the tracking number and anticipate receiving the package by June 20.
In my situation, well worth the wait for only $35.
Even though I chose to totally disassemble the iBook, Superior will do the disassemble/reassemble for $75.
I would not have done it by shipping the entire iBook, though. With the higher shipping cost, insurance, having to send out the hard drive with no back up, the higher repair cost, etc.-- in the end a prohibitive expense. I could probably buy a used iBook G4 for no more than $200, to put things in perspective.
In summary, Superior Reball had a great price, good enough communication (they answer the phone, but not e-mail) and it looks like fast return shipping. It took a lot longer than the ad states, so I am applying the old 'price, speed, quality-- choose any two' rule here.

IMac Freezing Up/Blue Screen

Similar Messages

Maybe you are looking for