IMac froze, now I can power up but can't open any applications...

Ok, forgive me if this has been asked 1000 times already, I don't have time to trawl through every post one here.....
Last night I was happily using my iMac, got a new email and when I went to open it everything froze. I could still move the mouse cursor around the screen but couldn't minimize, quit or force quit any applications. I could also not shut down/restart the system as normal. I powered off using the power button and rebooted from there. OSX started as per normal but I still can't open any of the applications. When you roll the mouse over any of the program icons it tells you what they are but won't open them. I also still cannot shut down the system through Finder and cannot force quit either.
Apple's technical "help" line has suggested restarting in safe mode etc, but is there anything else I could try to resolve the problem?

Hi Tom, what were the results of starting in Safe Mode, does that sort the problem? If it does then it gives us an idea where to look. If not try Repair Disk.
Steps for using Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair.
If you repair errors run it until no errors found.
-mj
[email protected]

Similar Messages

  • HT6058 Hello I m using iPhone 4S , it was quite good, but now I m using ios7.0.4 but when I open any application  like, Skype, camera, viber etc it has

    Hello I m using iPhone 4S , it was quite good, but now I m using ios7.0.4 but when I open any application  like, safari , Skype, camera, viber etc it has closed automatically y?

    Hello Junaid qureshi,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: Troubleshooting apps purchased from the App Store
    http://support.apple.com/kb/ts1702
    Best of luck,
    Mario

  • Computer boots with no password but when I open any application it asks...

    When I boot up my computer it does not ask for a password... This is good, O do not want to password protect it as I am the only user.
    The computer gets to the desk top as normal.... Thing is as soon as I open an application like Safari and go to a webpage the keychain pops up asking for a password. Same goes with any applications.
    Once I enter the password once after the first application opens the others do not require a password.
    How to I fix/eliminate this?
    Also when my computer boots Safari opens automatically once the computer gets to the desk top....
    Any help is appreciated.
    MM

    Jim,
    If joe's suggestion to run a repair on your keychain still doesn't emilinate the need to unlock the keychain, you might have to learn how to change the defaults on your keychain and some of the items that you don't want to have secured.
    Once you are in Keychain Access - bring up the help:
    You need to read "Why am I asked to unlock my keychain" to set whether the entire keychain needs a password when you first log in.
    Then, once the entire keychain behaves the way you want, you have to read the article on "Allowing applications to access your keychain" to set which programs are to be trusted to access your secure items without a password.
    Does this answer all your questions?

  • The phone can't power on,sometimes can power on,but dead halt when setup

    In use, the phone hint and  display "USB connect Itunes:, When finish connecting and update,can power up but will be dead halt during setup ,displaying the white apple  .the phone can't use now.
    Please help solve this problem.
    thanks.
    you can connect me by email- [email protected]

    i just stat up the phone and finish the set-up ,by choose English as language( i am a Chinese user),then it can run into the normal and idle status.
    BUT when take photo,the phone will go dead halt soon and restart.
    i will install the system again to try.

  • I just downloaded a program, but now can not open any applications...? I can't open any files or any programs. How would I go about fixing this?

    hey, writing this from my phone. Please pardon how everything is typed.  Quick question. Just downloaded the pear square on program. But now I can not open any applications. I beloved the message that popped up was something along the lines of 'do not have permission to access" ...so... I don't know whether or not I downloaded a virus or not. I was also obviously wondering how I might go about fixing this? -Thank you for your timeo

    Pear square one program

  • Brand new owner IMac desktop, with One to one service, but can't make an appt??

    I just brought home the Imac & paid for a One to One, but can't make an appt online??

    http://www.apple.com/retail/learn/one-to-one/ or just call AppleCare or the store from which you purchased the machine. If you're switching from PCs, see these:
    Switching from Windows to Mac OS X,
    Basic Tutorials on using a Mac,
    Mac 101: Mac Essentials,
    Mac OS X keyboard shortcuts,
    Anatomy of a Mac,
    MacTips,
    Switching to Mac Superguide, and
    Switching to the Mac: The Missing Manual, Lion Edition.
    Additionally, *Texas Mac Man* recommends:
    Quick Assist,
    Welcome to the Switch To A Mac Guides,
    Take Control E-books, and
    A guide for switching to a Mac.

  • We have an ipod touch, 3rd generation, 8GB. we lost the unlock code. we now try recovery via itunes, but can't connect to the ipod software update server. any suggestions?

    We have an ipod touch, 3rd generation, 8GB. we lost the unlock code. we now try recovery via itunes, but can't connect to the ipod software update server. any suggestions?

    Update Server
    Try:
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - Try on another computer/network
    - Wait if it is an Apple problem

  • HT1937 i used to use verizion network now i switch to Att but can use it my phone still under warranty. can i replace the phone

    i used to use verizion network now i switch to Att but can use it my phone still under warranty. can i replace the phone

    Your Verizon phone will not work on AT&T. If it's under warranty, take it to your nearest Apple Store for warranty service.

  • Out of the blue today, my gmail will not send.  I recently upgraded to Mavericks. But I have had not problem until today.  I can receive mail but not send. Any easy suggestions of what to do?

    Out of the blue today, my gmail will not send.  I recently upgraded to Mavericks. But I have not had problems until today.  I can receive mail but not send. Any easy suggestions of what to do?

    I have been having the exact same problem for weeks now with gmail.  None of my computers will send Gmail (they will recieve) and my Maverick computers (10.9.1) show gmail smtp.gmail.com as "offline".  I had installed Post Box and apple support thought it was that i had too many accounts (I have 2 ipads, an iphone (latest iOs), a work and home iMac and a powerbook).  I disabled all my gmail accounts in Mail and still no go from PostBox either . I tried connection doctor and it just spins for outgoing and say I either haveve the wrong pw or login - I dont.  I terminaled and tested port 465 (according to gmail instructions) and it works (port 25 did not).  I can access gmail from the webmail and send/recieve mail from it and it shows up in my webmail outbox. It is configured for imap.I just cannot send mail at all from any gmail account from any apple device using Mail (or PostBox). I am at a loss as was the apple support person who wished me good luck very politely and sympathetically.

  • I already have changed my apple id. But whenever I update any application, it is asking and using the old app id and password that is not a working e-mail already. How can I change my app id?

    I already have changed my apple id. But whenever I update any application, it is asking the old app id and password that is not a working e-mail already. How can I change my app id?

    So you made a new Apple ID? Unfortunately that won't work. Content is forever tied to the Apple ID that bought it. Apple does not transfer content from one ID to another and Apple does not merge Apple IDs. What should have been doen is mearely change the email address that was associated with the Apple ID.
    http://support.apple.com/kb/HT5621
    The only way that you can do this now is with a new email address if you used your current email address for the new Apple ID.

  • I have been having trouble getting my email on my iPad. It started when I brought it to the US on vacation (I live in London and my email provider is Virgin Media). It worked once since I returned, but that is it. I can send emails, but can't get them

    I have been having trouble getting my email on my iPad2.
    It started when I brought it to the US on vacation (I live in London and my email provider is Virgin Media). It worked once since I returned, but that is it.
    I can send emails, but can't get them.
    Any ideas, people?

    Hi Kharels
    Just posted this reply to 2 others with same sort of question:
    I have the same issue as i have my own email address and only want to use.
    There are two ways around this annoying problem. The first is to set up your own domain email account alongside your iCloud one, and when you go to send each email tap on From and you get a choice of emails addresses to reply from... ie your own domain or the iCloud one.  This is tedious though.
    The other is to set up your iCloud email as normal, then create a new one altogether. Choose 'Other' when creating this new account. Then put for the incoming server mail.me.com, along with your user name and password. For the outgoing server put the server you want to use - ie your own domain one. This is therefore a hybrid account and does work.
    Now switch off the email for iCloud (leaving on Calendar, Address Book etc). Switch on the email for your hybrid account (which of course is iCloud incoming as well).
    Providing you have directed your own domain email address to your me.com one, you will find the iPhone should behave itself and you can use the folders etc and these will synch with your Mac ok.
    Hope this work for you - let us know.
    Simon

  • Can access Yahoo, but can't open Yahoo Mail in Firefox. Can on Internet explorer.

    Can access Yahoo, but Can't open Yahoo Mail in Firefox. Can open Yahoo Mail on Internet Explorer. Checked Password.

    PROBLEM: This is the error I get when I simply try to open an email in Firefox. File not found Firefox can't find the file at http://us.mg1.mail.yahoo.com/dc/blank.html?bn=555&.intl=us&.lang=en-US. * Check the file name for capitalization or other typing errors. * Check to see if the file was moved, renamed or deleted.
    POSSIBLE SOLUTION:
    I contacted Yahoo and they had me clear (1) cookies and (2) cache. This did work so that I can now open the emails in Firefox.
    COMMENTS:
    Yahoo support said "Please rest assured that Yahoo! Mail is properly working as of this time. It would be best if you contact Mozilla Firefox help support. They have the right tools and knowledge with the settings to access Internet Sites like Yahoo! Mail on Mozilla Firefox browser."
    I'd like to know what to do to prevent this in the future because I've had this issue twice now in the last few weeks.

  • I can't open any applications on my old Imac G5

    Hi!After I reinstalled the original OSX 10.3 on my old Imac G5 20 inch. bought in2005, I can't open any applications and access my files. How do I fix that? Thanks! Michel D

    Hi! Brian
    Thanks for your reply!
    I reinstalled the OS 10.3 from the original disks i got when I purchased the G5. I can't open anything. I can't even see any files that I had before the reinstallment. Ithey must be there still because the hard drive shows that I have only 15Gigs of space left out of the 150 G of the total capacity. When I click on the apps icons at the bottom of the sceen nothing happens. I  also tried to install the most recentOS for that machine (OSX 10.5 leopard), the installment starts but stalls after a while, the little  coloured wheel starts spinning for ever. I womder if there's some hardware problem!!! This has been a great machine and i'd like to keep it alive.Thanks for any input.
    Cordialement!
    Michel D.

  • 1st-I was able to log into my account but was not able to open any applications, tried another account and same thing.  was able to log out and restart but now am unable to use mouse.  g5 dual core

    1st-I was able to log into my account but was not able to open any applications, tried another account and same thing.  was able to log out and restart but now am unable to use mouse.  g5 dual core, can't remember the os without seeing it.

    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    Let us know how far you get, or results.

  • I bought a EarPods October last year in USA, the day before yesterday the remoter can not work any more, it means by the EarPod still can lisence music but can not adjust the volume and answer the phone, can I get a new one or what can I get?

    I bought a EarPods October last year in the USA, the day before yesterday the remoter can not work any more, it means by the EarPod still can listen music but can not adjust the volume and answer the phone, can I get a new one or what can I get based on the one year product warrant?

    Now I am live in Baoding city, China, what I can do, it seems there is no apple store in my city??

Maybe you are looking for

  • Question on mail settings - reply does not allow me to view other emails

    When I am in Mail and I am replying to a message, I used to be able to check the contents of other emails by clicking on them. Since Masvericks I just get a pane in the middle of the screen which is the reply email pane. I cannot click on anything el

  • File Corruption During Sync Windows 8.1

    Hi I have recently introduced some Windows 8.1 systems into our environment, a Sony laptop and a non branded custom build, both systems are running Windows 8.1 Pro. Our environment is as follows: Windows Server 2008 domain PPTP VPN for laptop users u

  • Dv2630ea , hdmi to toshiba tv will only work if pc is restarted.

    when i plug my hdmi cable into my pc and tv i have to restart the pc before anything happens. then when the pc goes into idle it loses connection with the tv and i have to restart the pc again. any ideas? usually all i had to do was insert the hdmi c

  • WLC 5508 - WLANs disabled after reboot

    Hi, I'm running 3 WLC 5508, 2 of them running image AIR-CT5500-K9-7-0-116-0.aes, one AIR-CT5500-LDPE-K9-7-0-116-0.aes. On the 5508 running the LDPE-image, I have 9 WLANs (170,171,180,181,190,191,281,282,283), all defined with admin status "ENABLED".

  • Best way to implement auto increment in JPA.

    What is the best way to implement auto increment in JPA so that it will support all databases such as MySQL, MSSQL Server, Oracle etc. ? Or is there any way to set auto increment strategy in common place such as persistence.xml? Please help...