IMac FW 800 Port Problem & One Solution

I recently had a problem with my 2010 iMac's FW 800 port. I searched these discussions and found a solution that worked for me. I want to pass on the tip. I knew there was a problem with the port because I could access my FW 800 drive using the same cable when attached to another Mac.
This was confirmed when I displayed the "More info..." window from "About This Mac". I am running Mac OS X 10.7.1 Lion and the "More info..." button starts up a System Information app. Click on "System Report". Choose "Firewire" in the Hardware section. If your FW 800 port is not recognized there's be a message in red (I forget the exact wording).
Following directions in this message by den.thred, I reset the SMC > http://support.apple.com/kb/HT3964
That worked for me and I hope it works for others. Thank you, Dennis!
Charles

How curious, in Sytem Profiler or System Informatio>Firewire, what does it report like this...
Maximum Speed:          Up to 800 Mb/sec
OEM ATA Device 00:
  Manufacturer:          NewerTech
  Model:          0x0
  GUID:          0x30E002E0002156
  Maximum Speed:          Up to 800 Mb/sec
  Connection Speed:          Up to 400 Mb/sec
  Sub-units:
OEM ATA Device 00 Unit:
  Unit Software Version:          0x10483
  Unit Spec ID:          0x609E
  Firmware Revision:          0x110
  Product Revision Level:
  Sub-units:

Similar Messages

  • 2009/2010 iMac Firewire 800 port dead - can anyone help?

    My iMac i7 firewire port is dead. I've tried PRAM reset and SMS reset, and clean OS instal. I'm terrified as soemone told me it's connected to logic board and could cost £700 to replace if hardware is faulty. Need firewire port to connect to Pro Tools Digirack 003, have tested it on various other firewire devices and nothing is recognised. Any help would be greatfully appreciated x PS Running Mountain Lion.

    Ok, for connecting the camera to the iMac I used a 9-4 pin cable that externally looks like the one you linked in your post and unfortunately I can't test it with other devices.
    However, I tried to connect my Iomega MiniMax HDD (1 TB) via FireWire.
    The HDD has a 400 FireWire port and I used a cable like this http://www.smelectronics.com/images2/FIREWIRE96.jpg to connect it to the FireWire 800 of the iMac.
    Again Snow Leopard can't see the external device.

  • Spry Menu Bar transparency problem - one solution

    Like many other people I have spent several frustrating days trying to solve the problem of Spry Menu Bar sub-menus appearing to be transparent (text, etc. underneath the sub-menus shows above/through the sub-menu items). This problem manifested itself in IE7, but not in Netscape, Safari or Firefox.
    I thought it must be the dreaded IE z-index problem.
    I have been through most other people's questions and replies on the Adobe forums, tried all kinds of z-index changes and various other mods to my own CSS and/or the Spry CSS's - all to no avail.
    My situation:
    I have a Spry Menu Bar above a clicktrail and a text block. Both the clicktrail and the text block showed through the sub-menu items, which drop-down over them.
    All three items are located in relative-positioned divs, necessary because the whole page design is contained in a self-centralizing container div and absolute-positioned divs screw up the whole page layout when the screen size or browser window size changes.
    (Sorry, I can't upload the files to a website at the moment.)
    The solution that works for me in Dreamweaver CS4:
    I selected the divs for the clicktrail and the text block, one at a time, and selected Modify > Arrange > Send to Back in Dreamweaver CS4.
    I then selected these two items again and selected Modify > Arrange > Bring to Front.
    Finally I selected the div containing the Spry Menu Bar and selected Modify > Arrange > Bring to Front. The thought behind this was that this would put the Spry Menu Bar on top of everything else - and it works!
    This solution works in all four browsers, but don't ask me how! I can't see any change in any CSS, nor in my template code. All I can see is a strange, flashing vertical line (like an enormous cursor - about 10 cm [3"] high) in the middle of the template page only (and only in Dreamweaver) if I click on the page background. I can neither find an explanation for this nor anything in the coding which might cause it. By the way; the z-index for the menu div =2, the z-index for the clicktrail div is not defined and the z-index for the div for the text block is set to auto. I haven't tried other values and to be honest I'm not sure what they were set to before I applied the above 'solution'.
    But hey - who the hell cares - my site works!
    I hope this helps someone else out of an absolute hell-hole...if someone out there can explain where to find the code that had been changed or added by doing this I'd like to know. I don't like things I can't explain - even if they do work!

    This is where the browser is told to supply a white background
    ul.MenuBarHorizontal a
         display: block;
         cursor: pointer;
         background-color: #fff;
         padding: 0.5em 0.75em;
         color: #333;
         text-decoration: none;
    Vhange the value to transparent.
    Also the last line int the CSS should be removed as in
    filter: "alpha(opacity=60)";
    Gramps

  • IMac Firewire 800 port not supplying power

    Hi,
    The FW800 port on my iMac suddenly stopped supplying power to bus-powered drives.
    The same drives work/mount when I use an AC adapter.
    Have thoroughly trouble-shot (shooted?) the hard drives/cables on a different computer.
    Tried the SMC reset (unplug for 15-seconds).
    Anything else I can try before sending it to Apple?
    System Details:
    iMac
    27-inch, Mid 2011
    Processor  3.4 GHz Intel Core i7
    Memory  16 GB 1333 MHz DDR3
    Graphics  AMD Radeon HD 6970M 2048 MB
    Software  Mac OS X Lion 10.7.5 (11G63)

    I only use one bus powered drive at a time.
    Have been using them without issue since I got the iMac in 2011.  The drives currently work fine on my MacBook Pro.
    Here are the drives I use: http://eshop.macsales.com/shop/firewire/on-the-go
    Bus powered RAID (2 drives): http://eshop.macsales.com/shop/firewire/EliteALmini/RAID/eSATA_FW800_FW400_USB
    Genius Bar it is….

  • Zen Micro "Firmware Problem" - One solution and what to do BEFORE it happ

    My Zen Micro 6GB recently croaked with the dreaded "firmware problem" message. After a call to support, I was told to send it in, however I was later able to connect to the unit and download new firmware.
    Here's what happened:
    In the middle of a playlist, the unit froze, displaying "firmware problem."
    - I took the battery out and powered up in recovery mode, then tried both reboot and reforomat. No luck; Still got "firmware problem."
    - I downloaded firmware updates, thn connected the unit to my laptop, which does not have MTP media explorer installed. The laptop does have Yahoo Music Engine and Windows Media 0, both of which are used regularly to copy music to device.
    - The computer recognized the Zen Micro, but the firmware update did not run, saying it could not connect to the device.
    - Retried several times, after reformatting, etc.
    Now, here's what seemed to fix it
    - Let the battery drain completely while in the unit
    - Connected the Zen Micro to a computer with the MTP media explorer already installed. This is a system that is also used to regularly download music to the device.
    - Allowed the battery to charge for an hour
    - Started MTP media explorer, noticed that device went into "Recovery Mode"
    - Ran the firmware upgrade and it installed.
    This is conjecture, but it seems that the MTP media explorer must be running to launch the firmware upgrade, but you can't install MTP without a valid device connected. I don't know why this is - maybe some kind of copy protection scheme. I only had it installed on one of my computers because it seemed unnecessary and I hate loading software that I'm not going to actually use.
    This is what worked for me. Hope it works for you.
    I'm still really disappointed with Creative's warranty terms, lack of phone support past 60 days and failure of tech support to recognize the problem and offer a solution, but my unit is working again and I didn't have to send it back!

    By "MTP media explorer", do you mean the MTP/PlaysForSure version of Zen Micro Media Explorer? The earlier versions say "(for MTP devices)"; the latest ones say "(for PlaysForSure devices)". Or do you mean the Microsoft "MTP icon" in My Computer, which should appear on all MTP-capable systems (including your laptop)?
    I don't really think it's a DRM or copy protection issue; I think the "firmware problem" is wiping out the hardware code the firmware installer uses to confirm that the device is indeed a Micro instead of, say, an iRi'ver. I suspect ZMME is one of the alternate means it uses to confirm that a Micro is connected. (An issue for further testing is whether ZMME should be launched or just installed.) Firmware fails on all kinds of devices; I suspect this is just a peculiarity of Creative's MTP/Janus firmware installer.
    This is likely to be a significant issue for the FAQs and/or Creative knowledge base. With a growing number of MTP/Janus players in the Creative lineup (Sleek, MicroPhoto, and shortly Touch & Xtra), it probably won't be just a Micro issue in the future.
    Edit: I just read the other thread, and they seem to solve it by going to a system without Creative software and installing the ..0 firmware. So there seems to be two solutions for now:
    If you don't have any Creative software installed, reload firmware and run the ..0 upgrade. (If you need 2.x firmware, then install the Creative jukebox driver and run the 2.20.05 upgrade; you can uninstall the driver afterwards. Sorry, but some of us need 2.x firmware.)</LI>
    If you have the 2.x ZMME installed, open it, then reload firmware and run the 2.20.05 upgrade.</LI>
    Message Edited by RBBrittain on 0-9-2005 0:06 PM

  • Netbeans 5.0 Executable Jar Problem--One Solution

    Hi all.
    This issue seems to constantly come up with all the Netbeans IDEs. I managed to solve the problem I was having so I felt obligated to post my solution since it can be mind-numbingly frustrating to deal with.
    This may not work for you, but it worked for me in my situation so you may want to give it a shot.
    This is what I did to solve the problem:
    a) make sure a file called manifest.mf is in the root of your project folder. The manifest file should contain the following text (do not include the lines with ----------- on them of course):
    Manifest-Version: 1.0
    X-COMMENT: Main-Class will be added automatically by build
    To be safe:
    Note the trailing carriage return after the X-COMMENT line--LEAVE THIS IN.
    Note the case of the file name manifest.mf--MAKE SURE YOU DO NOT ADD CAPITAL LETTERS.
    b) In the nbprojects folder of your main project folder, open the file project.properties and add the line:
    manifest.file=manifest.mf
    Clean and build your project. If you check the manifest in the main jar file, you'll see (hopefully) it has the Main-Class attribute set, as well as the class path to any other jar files you've put in your project classpath.
    BTW1:
    Make sure you don't have any files open in the directories that will need to be deleted by the 'clean' step or you'll get an error.
    BTW2:
    Also, make sure you've set your main class in your project by right-clicking the project node, click Properties, select Run from the tree on the left side, and fill in the 'Main-Class' text field.
    This worked for me. I hope it helps others with the overly-confusing executable jar issues the Netbeans series of IDEs always seem to have. I think the complexity lies in its use of Ant in the build process. While Ant adds a ton of flexibility--it also a ton of complexity.
    For example, this jar issue has been very annoying, but I wouldn't have been able to add a hook into my build process that signs my jar files (for use with Java Web Start) without the Ant system.
    Netbeans 5.0 is still currently my favourite Java IDE though.
    Cheers!
    Michael N. Christoff

    Genius! thank.

  • Firewire 800 port no longer works

    my time machine backup for years on my 2.8Ghz iMac Extreme has gone through the FW 800 port to the same WD drive. unfortunately i recently had backup failure issues, but did discover that it still worked through the FW 400 and USB ports (all of which are inputs on the back of the WD My Book). with no other FW 800 port in the house to test, i naturally assumed that the problem was in the notorious WD drive's port. and i wanted my faster backup speed back. so i actually got WD to swap out for a new external drive under warranty (it's 3 years old, i have no idea why they did it, but hey.....). however, on arrival today, the iMac's 800 port now appears to be the initial troublemaker since i still get no response from it, but everything works just dandy through the 400 and USB ports once again.
    so now that i know the trouble is actually in my iMac, is there anything i can do except for applecare, which i have on this machne until november 2010? the nearest apple store is literally several hours away as we live in the boonies of upstate new york. so for me, applecare is always the last option. so far i blew compressed air at it just to clean it out, but that's it. if i take the back off, are there any odds that i may find a loose wire or something? i'm not sure if i've ever opened this particular iMac, so i can't remember what it looks like in there, and don't know if it's worth a disassembly.
    any advice appreciated!!

    It might be something you can address. Have you done either SMC or PRAM reset? At the very least I would do that.
    If that doesn't take care of it you can run a Apple Hardware Test to see if there is a hardware problem.
    After you have done these actions and it still doesn't work definitely call Apple, the US number is: 800-275-2273. When you call let them know what troubleshooting steps you have taken.
    Regards,
    Roger

  • New imac has only one firewire 800 port?

    Is there a hub or repeater you can use instead of daisy chaining. Can't figure out why my old imac has two firewire ports and the new imac has one. How are others managing multiple hard drives? I wish to use a hub for my firewire connections. What is the best way. thanks

    You can locate Firewire hubs however they are expensive. I have had 3 Firewire 800 external HD's daisy chained together for 3 years that work flawlessly. The drives I have come with 2 FW 800 ports so this is quite easy, there are several top quality external HD's that are similar including:
    OWC Mercury Pro line
    Lacie Quadra D2 line (this is what i have)
    G-Tech G series line
    All of these drives have similar specifications and are all high quality products. I think you will find them to be the most recommended on these forums.
    BTW your old iMac had 1 Firewire port and 1 Firewire 800 port not 2 firewire ports.
    Regards,
    Roger

  • Daisy chaining external hard drives and a video camera from a single firewire 800 port on my imac

    I have only a single firewire 800 port on my imac and want to know if I can daisy chain two external hard drives and my video camera, please? If not is there another solution using USB 2?

    Are the external HDs self powered or powered by the FW port?  If they are self powered there should not be a problem. If they are port powered they may put a strain on the port's power output but I'n not positive on that. 

  • How do I capture tape-based media to my external hard drive?  There is only one firewire 800 port on the back of my I mac.  The manual says to import tape footage directly into fcpx, but then I lose my external hard drive.   thanks for your help.

    In FCP X How do I capture tape-based media (hdv clips)- which I want to import-to my external hard drive?  There is only one firewire 800 port on the back of my I mac.  The FCPX manual says to import tape footage directly into final cut, which works, but then I lose  my external hard drive    Do I  have to import it into an event, then copy it over to an external hard drive?  On Larry Jordan's tutorial, he has 3 external hard drives that show up on his monitor WHILE he imports his tape based media.  How is that done?  I can only get either the camera to appear OR my external hard drive.   thanks for your help.

    Thanks for your response, but that doesn't solve the problem.  Yes, the LaCie hard drive has 2 firewire ports-
    I have always done what you suggest (works fine in FCP7), but in FCPX when I do that the camcorder icon
    does not appear.  It only shows up when I DIRECTLY import the footage via firewire.  ????

  • Daisy chain or FW to each 400/800 port on imac?

    I have a 2007 intel imac with 1 FW400 port and 1FW800 port.
    I have one 5400RPM 1TB external hard drive to house all my media files (music,pics & movies) with FW 800 or FW 400 ports.
    And one 7200RPM 2TB external hard drive to serve as a backup for both my imac & the 1TB hard drive, with FW 800 or FW 400 ports.
    Question is what is the best way to connect these without slowing the whole thing down? Connect the 1TB drive to the FW400 port on the imac and the 2TB drive to the FW 800 port on imac....or daisy chain one to the other then to the imac, all using FW 800???
    Thanks!
    Ivansnikki

    Okay, so just to clarify: 1TB (5600RPM) HD <-> 2TB (7200RPM) HD <-> imac?
    Thanks for the quick response!

  • Firewire 800 front port problem

    I'm using an RME Fireface 800 audio interface, which is a Firewire 800 device. When I hook it up to the front FW800 port on my Mac Pro, it is periodically disconnecting while in use (using Logic, Final Cut Pro, etc.). To be clear, I don't mean that the cable is physically disconnecting, but rather that the interface disappears from the operating system while still attached and powered up.
    When I use the rear FW800 port I'm not having this problem, at all.
    Can anyone think of an explanation other than perhaps my front FW 800 port is screwed up? Has anyone else had this issue?
    Thanks...

    Hi John,
    Yep, exactly the same problem I had with my Mac Pro's front FW800 connection and the FF800. The problem in the end turned out to be because I had my SSL Duende mini plugged into the rear FW400 port. Have you got any other firewire devices plugged in? The FF800 really dislikes sharing a bus with anything else, which is why I went out and bought a PCIe FW400 card and now all my devices have their own bus and all works just as you'd expect. Hope that helps, cheers.

  • Hi.  I have a Macbook Pro Model 5,5 with one 800 firewire port.  I need to create two firewire 800 ports but only have an SD card slot (this is for video interface with 2 cameras).  Is this possible or do I have to have an express card slot in order to do

    Hi.  I have a Macbook Pro Model 5,5 with one 800 firewire port.  I need to create two firewire 800 ports but only have an SD card slot (this is for video interface with 2 cameras).  Is this possible or do I have to have an express card slot in order to do this?

    Hi Jessica,
    No, the SD slot will not work, you need an ExpressCard/34 slot.
    I do not know if it works with cameras, but with two or more HDs, if the first one has two FW ports, you can "daisy chain" one or more additional HDs from it.

  • "Which Firewire cable should I purchase to connect a late 2006 Intel-based iMac with a 400 port to a Mid 2010 IMac with an 800 port?"

    “Which Firewire cable should I purchase to connect a late 2006 Intel-based iMac with a 400 port to a Mid 2010 IMac with an 800 port?”

    To connect both iMacs, you need a FireWire 400 to 800 adapter, and a FireWire 400 cable, so you will be able to connect both Macs

  • IMac 21.5",3.2 ghz i3. has dead firewire 800 port.

    Like it says firewire 800 port does not work. I plug in a known good ext HD. With known good cable. Power light on HD comes on & I can hear it spinning
    but it never mounts to desktop. Doesn't show up in Disk utilities either. HD mounts fine if I use usb port. I know FW 800 port on HD & cable are both good
    because they work fine on friends 27" iMac. Anybody have any ideas or suggestions. I would really appreciate it.
    Thank you in advance
    HAPPY HOLIDAYS

    I have tryed that. I've also tryed resetting the SMC, & the PRAM. Thank you for the suggestion.
    From what I've been reading on this site, it sounds like I don't have any choice but to bring the
    iMac into the service center. I am glad I got Apple care. Otherwise I would be screwed. My iMac is just over 1 year old. Once again Thanx for your time & help. Appreciate it. Have a Great Day

Maybe you are looking for

  • Cannot view all text on page in text reflow mode (while zoomed)

    I have a samsung galaxy S5 (Android 4.4).  Acrobat reader in text reflow mode zooms in on the text at the top of the page only.  I cannot scroll down to view the rest of the text on the same page.  I can still navigate through all the pages in the do

  • Error rectification required

    Error in mru internal routine: ORA-20001: Error in MRU: row= 1, ORA-20001: ORA-20001: Current version of data in database has changed since user initiated update process. current checksum = "6489FDA0649A9A4A45273BCEED518176", item checksum = "1BCA6E3

  • Oracle canned reports verification

    Is there a way we can tell whether a canned report has been modified/customized or retained in its original form provided by Oracle out of the box without any modifications/customizations whatsoever post go live or prior to go live? The report object

  • ADSL setup instructions for byo modem models

    Before you begin setting up your modem, make sure you've received an email from us confirming your username and password. Step 1 Your modem needs to be connected to your phone line, computer and power according to the manufacturer's instructions. If

  • My eclipse plugin get error message during runtime

    Hi all, I have made an eclipse plugin. During the development, i have no error. However, after i deploy my plugin. there is error shown below. Java Model Exception: Java Model Status [Cannot retrieve the attached javadoc for InvocationTargetException