IMac G3 REFUSES to boot from any cd.

Okay, so as some of you may recall from my last post, I've a misbehaving iMac G3 on my hands... I have:
A Mac OS 9.2.2 installation disc (Genuine, retail)
A Mac OS 10.4 installation cd pack (Of four cds, retail, genuine)
Two PowerPC release editions of linux: Xubuntu 6.06 and 8.04
All of which I've tried, but to no success...
Feel free to request as much detail as you like. I have a camera so I may be able to video log it if you'd like... In fact, I think I will.
-Don

http://www.youtube.com/watch?v=j7UbK9Hn80Y
There's the video log.

Similar Messages

Satellite NB10t-A-101 refuses to boot from any external medium

I have just purchased an NB10t in the UK, and am trying to boot to a bootable USB
I have noticed the BIOS on this particular model is UEFI mode only, That in itself is not an issue as users can sign their own OS's with a CA and use them, however this laptop refuses to boot from any external medium...or even provide an error message.
I have changed the boot priorities in the BIOS and moved the USB to the top
I have disabled Secure Boot option in the BIOS
I have tried all 3 USB ports as well as 3 different drives (NOTE: THESE WORK FINE ON 3 OTHER SYSTEMS a dell laptop/desktop and an acer laptop)
I have also tried various distributions (Debian & Arch)
I have used multiple installation methods (Unetbootin/Full hard install/Rufus etc..)
I have tried all versions of your currently released BIOSs (Shipping with V1.0, Jan-V1.1 Feb-V1.2)
After trying all of these when pressing F12 at boot, the boot menu shows up but upon selecting a device the system continues to boot into the HDD (Win8)
After googling around I noticed you have released 2 BIOS updates I have tried all versions of these and still the system refuses to boot into my selected device
Can we expect any more firmware updates in the near future? Is there a way to workaround this issue to boot my chosen OS? Is there a CSM option?
Edit: Punctuation
null

Hi sorry about the multiple threads guys, the forums have been behaving a bit buggy over the past few days (anyone seen all the duplicates in the main satellite section?)
Onto my problem,
Just to make it clear to joselu90 I'm not trying to install or "reinstall" windows 8 or anything, I would like to install a Linux distro if possible
I have been doing as much reading as possible about the bay-trail architecture etc
In response to Tonny
+"This new Intel Bay Trail technology support only the UEFI capable devices and systems (Win 8, Win 8.1)"+
There are many Linux distro's capable of UEFI booting but some guidance on navigating toshiba's system would be very helpful
All I'm left with is this question that, "it should be possible to put another OS on this laptop" Or have Microsoft and Intel truly "jumped into bed with each other", so-to-speak and made it impossible to use any other software than their own? (I can't believe that to be the case) and we know for a fact that many Linux distributions support UEFI
Thanks for your time,
P.S I have not marked this question as answered yet..

Imac g5 won't boot from any Cd/DVD

Hey,
New member here.
I have an Imac 20" 1.8 Ghz PowerPC G5, running Mac OS X 10.4.9.
My problem is my computer won't boot from from any DVD or Cd, not the original system disc (10.3.5), not from a newer Imac system disc (10.4.7), not from a Disc Warrior 3.03 disc.
What I get from the Disc Warrior disc is a gray screen with white letters backed in black, saying
"panic (cpu 0 caller 0xooze49do): unable to find driver for this platform: "powermac8,1""
Plus other stuff written underneath it, looking like a log of how far it went.
When I try to boot from the original 10.3.5 DVD, it does boot up but doesn't work after that - it gets to the language to choose and stops.
When I try to boot from the 10.4.7 DVD, I get the gray screen, same results as the Disc Warrior cd.
I even copied my system folder (10.4.9) onto a firwire drive and start from that, but I get the gray screen again.
I zapped the pram, and reset the Open Firmware - still no dice.
Can anybody shed some light on this?!?
Many thanks!
Rufmanj

To Apple Discussions.
Please check out the following thread which the original posted had the same error you had.
http://discussions.apple.com/message.jspa?messageID=4459207#4459207
You may find some helpful troubleshooting solutions in the above thread.
Make absolutly sure you are using the "DVDs" that originally came with the computer.
Also, see Knowledge Base Article; http://docs.info.apple.com/article.html?artnum=106805 Mac OS X: "Broken folder" icon, prohibitory sign, or kernel panic when computer starts

G4 won't boot from any Linux disc I put in it and c key no longer boots cd

I have a G4 Powermac (sawtooth, DVD drive, 512 MB RAM, 30 GB HDD) which has started refusing to boot from any Ububtu discs I have all of a sudden.
I'll be more specific. I've previously been able to boot from Ubuntu 6 cds (originals from shipit, not burnt) as well as Ubuntu 7 (burnt disc). I haven't made any changes to the system that should stop it booting from them. Currently installed on the hard disc is System 9 and Puma. It is still booting ok from my System 9, Puma, Panther and Tiger discs; but when trying to boot from my ubuntu discs (I've tried all of them to eliminate the possibility of a stuffed disc) the screen goes black for a second as if it is starting to boot, but then it kicks me to the flashing folder screen you get when it can't find a startup disc. Oddly enough the background colour of this screen isn't grey like usual. It's orange. I've never seen that before. If I leave it sitting at this screen after about 30 seconds or so it starts up from the hard disc on its own.
Another odd thing: the c key no longer forces the machine to boot from the cd when held on power up. This is extremely odd, as holding down option brings up the startup disc selector, and cmdopt+shiftdel also works. I've tried everything I can think of. Used a different keyboard, reset the NVRAM (by cmdopt+pr and my manually going into open firmware and doing a "reset-nvram" and "reset-all"). I've tried the PMU reset switch on the logic board. I've tried using different drives. In all cases it still refuses to boot from cd when holding c.
I don't think that the mac refusing to boot while holding the c key is coincidental. I believe that whatever the issue is that's causing this issue is what is also causing the mac from not booting any Ubuntu discs. It's a very strange problem and upon searching around, it seems this doesn't seem to have happened to anyone else before. Any advice will be greatly appreciated. Thanks.

Hi, yoshi -
I just have to be rush to get the cd in the drive and then to hit cmdshift+optdelete before it's too late...
You should also be able to use Startup Manager to choose the CD as the boot volume -
Article #HT1310 - Startup Manager: How to Select a Startup Volume
A feature not discussed in that article -
Once Startup Manager has loaded, if the CD is not in the drive you can press Command-. (Command-periodkey) to open the drive - this should work even if another disk is already in the drive. Insert the disk you want to use, close the tray, wait a few seconds for the disk to spin up and get recognized, then click the circular arrow icon on the left - this forces a rescan of the available drives, which should result in an icon of the new disk appearing in the array. Click it to select it and then click the straight arrow icon on the right (or press Return).

G5 refuses to boot from external hard drive......

I have tried 3 different external firewire hard drive setups & it refuses to boot from any of them. This is extremely disturbing, because my trusty old G4 never had any issues like this. The latest one I tried is a Seagate enclosure (model # ST3500630AS), which is a Firewire external/SATA internal setup. The other one I have tried is my trusty old Kanguru S-80.0 (KU-35/81) - it has since been upgraded to a 120 GB drive internally. The third one I tried is a brand new Ultra enclosure (USB 2.0/Firewire 400) - the model# is ULT31310. This makes absolutely no sense. It will start to boot, but then it either gives me circle with a diagonal line through it or the Apple comes up & it just sits there (the fans will rev up after about a minute of sitting there). I cannot believe that 3 different firewire chipsets are not supported by the G5 for boot. If anyone has any ideas as to what is causing this problem, please let me know (It isn't a huge deal, as I can always yank the SATA backup drive & reinstall it into the G5 in an emergency, but I should be able to do it from an external drive). Any input will be greatly appreciated. Thanks in advance.
G5 2.0 DC/Pismo 400 Mac OS X (10.4.9) 1.5 GB, 16x DL DVD Burner, Nvidia 6600 LE/512 MB, Still going strong
G5 2.0 DC/Pismo 400 Mac OS X (10.4.8) 1.5 GB, 16x DL DVD Burner, Nvidia 6600 LE/512 MB, Still going strong

Did you reformat them to Mac Extended?
Did you install or clone the software onto the drive? what did you use?
Have you looked at OWC's FW cases? never had problem on my G4 or Mac Pro with their FW800 and 400 cases (all Oxford 911-912-924 which are mac friendly).
The Oxford 924 is FW800/400/USB2/SATA and accepts SATA drives.
http://www.macsales.com
You are getting kernel panics.
I avoid vendor cases. Most support PCs fine, but weak on Macs (even WD MyBook Pro).
One article today on Maxtor One Touch, older series, was that it would force a drive to 28-bit LBA mode, didn't support large 48-bit, and write to the drive's firmware. Again, avoid these vendor "solutions."
If you set it up and format it in Disk Utility, making sure to select Partition -> Options... APL format table, it should work. Other format types won't work.
Then use SuperDuper or Disk Utility to clone the drive (making sure that "ignore ownership" is OFF (not selected) in the Get Info for the drive volume.
I've got 8 FW cases from OWC and never had a problem with any.

X-Serve refuses to boot from HDD

Hi!
Short version: We have an X-serve, a later Xeon but not the latest that for some reason refuses to boot from any internal HDD both original Apple branded 80GBs and newer ones that works fine in other X-Serves we have.
Full:
The X-Serve was delivered with 10.5 but in order to use the OD with some other servers that runs on 10.6 I took out the org drive and put in a newer 750GB drive that we use in the other X-Serves and some MacPros with no problems.
This problematic X-Serve boots happily on the OS-X Server installer DVD. I format/partition the 750GB drive and installs 10.6 server on it. After installation and reboot it refuses to boot from the newly installed HDD.
I initially thought that the PRAM battery was out but If try bless -- info running on the installer DVD it correctly indentify the 750 drive and blessed system folder. I can also set it and the machine sets and reads the bless info. I can put in a cloned system drive (80GB original Apple HDD) from another identical X-Serve and it refuses to boot from it even if bless again reports a correct path and folder to the cloned 80GB drive.
I have also tried to install a 10.5 server system from the very DVD that the server was delivered with without luck.
Left to do is to install a new system on USB drive/stick or FW drive. But to be able to use the machine in production we cannot rely on external HDD of course.
So I'm open to suggestions and ideas – what can I do to get it up and running booting on HDD?
Could it still be a battery issue?
Regards, Per Mattsson
[email protected] – www.miun.se

I would be trying to boot off an external FW or USB drive as you mentioned, as a troubleshooting measure. If you can, use an external drive enclosure and install one of the drives from an internal drive carrier into that enclosure. I have seen drive carriers go bad, or it could be something more serious like logic board issue.

IMac will not boot from any mode except Target Disk

I have an Early 2008 Penryn iMac 24" MB398LL/A running OS X 10.7.4 (see specs below) that will not boot from ANY mode, It also has several strange vertical bars from top to bottom on the screen. They are about 10 px wide, with some pixels empty and looks a bit like a barcode if you squint at it.
I have tried Safe Boot, Force Boot, DVD Boot, FireWire/USB Boot, and it always gets to the same point. It gets to the apple screen with the spinning gear and then after about 8 seconds it freezes. The only way it works at all is in Target Disk Mode. It pops right up on my Macbook Pro and I was able to grab all my info!
I have run Disc Utilities and Tech Tool on it many times from my MBP and it passes every test.
I reformatted the HD and installed 10.7 again, it still freezes up at the same point.
I have tried using Single User mode and every time have had to run /sbin/fsck -fy twice because it always says the disk is ok but it was modified on the first pass.
I thought maybe it had a bad video card or logic board but and I ran the Apple Hardware Test on many occasions and it always passes. Recently I was told about Loop Mode and just completed running the AHT for just over 30 hours without any errors at all.
UPDATE...
Strange Part… I tried installing Mountain Lion in Target Disk Mode and everything went smoothly. When it restarted on its own the lines on the screen were gone for the moment, but the Mac still freezes up on the spinning gear and immediately restarts on its own. I have run every thing listed above on it and still nothing. Sometimes the lines reappear then in two more starts they are gone.
I did manage to have it start one time got a copy of the the error report (its at the bottom too) The Mac ran for at least 30 minutes with no problems, then the screen went crazy a few seconds and it became unresponsive. The mouse moved but that was all it could do. Now my iMac continually restarts itself, I don't have any more ideas, HELP!
Specs...
The iMac "Core 2 Duo" 3.06 24-Inch Aluminum (Early 2008/Penryn) features a 3.06 GHz Intel "Core 2 Duo" processor (E8435), with two independent processor "cores" on a single silicon chip, a 6 MB shared level 2 cache, a 1066 MHz system bus, 2 GB of RAM (800 MHz DDR2 SDRAM, PC2-6400), a 500 GB (7200 RPM) Serial ATA hard drive, a vertically-mounted slot-loading DVD±R DL "SuperDrive", NVIDIA GeForce 8800 GS graphics acceleration with 512 MB of GDDR3 memory, a built-in iSight video camera, and built-in stereo speakers underneath the 24" glossy TFT Active Matrix LCD (1920x1200 native) display.
Error Report…
Sat Sep 1 17:13:12 2012
panic(cpu 0 caller 0xffffff801a4b7b95): Kernel trap at 0xffffff7f9bab8654, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000010, CR3: 0x0000000011803000, CR4: 0x0000000000000660
RAX: 0x0000000000000001, RBX: 0xffffff8050e00000, RCX: 0xffffff801aa8eb00, RDX: 0xffffff80602dba38
RSP: 0xffffff80602dbb60, RBP: 0xffffff80602dbb60, RSI: 0x0000000000000000, RDI: 0x0000000000000000
R8: 0x0000000000000000, R9: 0x00000000000000ff, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
R12: 0xffffff8050e00000, R13: 0x0000000000000000, R14: 0x0000000000000002, R15: 0x0000000000000000
RFL: 0x0000000000010246, RIP: 0xffffff7f9bab8654, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000010, Error code: 0x0000000000000000, Fault CPU: 0x0

Here is the complete error log...
Sat Sep 1 17:13:12 2012
panic(cpu 0 caller 0xffffff801a4b7b95): Kernel trap at 0xffffff7f9bab8654, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000010, CR3: 0x0000000011803000, CR4: 0x0000000000000660
RAX: 0x0000000000000001, RBX: 0xffffff8050e00000, RCX: 0xffffff801aa8eb00, RDX: 0xffffff80602dba38
RSP: 0xffffff80602dbb60, RBP: 0xffffff80602dbb60, RSI: 0x0000000000000000, RDI: 0x0000000000000000
R8: 0x0000000000000000, R9: 0x00000000000000ff, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
R12: 0xffffff8050e00000, R13: 0x0000000000000000, R14: 0x0000000000000002, R15: 0x0000000000000000
RFL: 0x0000000000010246, RIP: 0xffffff7f9bab8654, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000010, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80602db800 : 0xffffff801a41d5f6
0xffffff80602db870 : 0xffffff801a4b7b95
0xffffff80602dba40 : 0xffffff801a4ce4ad
0xffffff80602dba60 : 0xffffff7f9bab8654
0xffffff80602dbb60 : 0xffffff7f9baa218c
0xffffff80602dbbb0 : 0xffffff7f9baa20e2
0xffffff80602dbbd0 : 0xffffff7f9ba73554
0xffffff80602dbc00 : 0xffffff7f9aa8d470
0xffffff80602dbc40 : 0xffffff7f9aa8d3df
0xffffff80602dbc60 : 0xffffff7f9aa926ec
0xffffff80602dbcf0 : 0xffffff7f9aa8af20
0xffffff80602dbd20 : 0xffffff7f9aadacc7
0xffffff80602dbd70 : 0xffffff801a833b9b
0xffffff80602dbdc0 : 0xffffff801a862d57
0xffffff80602dbe30 : 0xffffff801a497cef
0xffffff80602dbe80 : 0xffffff801a420abd
0xffffff80602dbeb0 : 0xffffff801a410448
0xffffff80602dbf00 : 0xffffff801a4195fb
0xffffff80602dbf70 : 0xffffff801a4a5ad6
0xffffff80602dbfb0 : 0xffffff801a4ced13
      Kernel Extensions in backtrace:
         com.apple.iokit.IOGraphicsFamily(2.3.4)[2600903C-EEDE-321B-A023-169DC9B26EA6]@0 xffffff7f9aa81000->0xffffff7f9aab8fff
            dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f9aa4d000
         com.apple.NVDAResman(8.0)[6A699209-FB98-316B-A3C0-DCA82AA8C86B]@0xffffff7f9aad8 000->0xffffff7f9addafff
            dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f9aa4d000
            dependency: com.apple.iokit.IONDRVSupport(2.3.4)[99CA4184-8D92-31B2-8726-46139E8E3DFF]@0xff ffff7f9aac4000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[2600903C-EEDE-321B-A023-169DC9B26EA6]@0 xffffff7f9aa81000
         com.apple.GeForce(8.0)[4B9BE287-5251-398E-96B0-BB16C9BFB2D9]@0xffffff7f9ba72000 ->0xffffff7f9bb34fff
            dependency: com.apple.NVDAResman(8.0.0)[6A699209-FB98-316B-A3C0-DCA82AA8C86B]@0xffffff7f9aa d8000
            dependency: com.apple.iokit.IONDRVSupport(2.3.4)[99CA4184-8D92-31B2-8726-46139E8E3DFF]@0xff ffff7f9aac4000
            dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f9aa4d000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[2600903C-EEDE-321B-A023-169DC9B26EA6]@0 xffffff7f9aa81000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
12B19
Kernel version:
Darwin Kernel Version 12.1.0: Tue Aug 14 13:29:55 PDT 2012; root:xnu-2050.9.2~1/RELEASE_X86_64
Kernel UUID: 3005059E-270B-3B9F-940D-7A66C05DDC9D
Kernel slide:     0x000000001a200000
Kernel text base: 0xffffff801a400000
System model name: iMac8,1 (Mac-F227BEC8)
System uptime in nanoseconds: 26349024446
last loaded kext at 22534854703: com.apple.driver.AppleHDAHardwareConfigDriver          2.3.0f2 (addr 0xffffff7f9c489000, size 12288)
loaded kexts:
com.apple.driver.AppleHDAHardwareConfigDriver          2.3.0f2
com.apple.driver.AppleHDA          2.3.0f2
com.apple.driver.AppleTyMCEDriver          1.0.2d2
com.apple.filesystems.autofs          3.0
com.apple.iokit.IOBluetoothSerialManager          4.0.9f8
com.apple.iokit.IOBluetoothUSBDFU          4.0.9f8
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.AppleMuxControl          3.2.6
com.apple.driver.AppleBacklight          170.2.3
com.apple.driver.AppleUpstreamUserClient          3.5.10
com.apple.driver.AppleMCCSControl          1.0.33
com.apple.GeForce          8.0.0
com.apple.driver.AppleSMCPDRC          1.0.0
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.ApplePolicyControl          3.2.6
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.driver.AppleIRController          320.15
com.apple.iokit.SCSITaskUserClient          3.5.1
com.apple.driver.AppleFileSystemDriver          3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          34
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.2.1
com.apple.driver.AppleFWOHCI          4.9.5
com.apple.driver.AppleUSBHub          5.1.6
com.apple.driver.AirPortBrcm43224          600.36.17
com.apple.iokit.AppleYukon2          3.2.3b1
com.apple.driver.AppleAHCIPort          2.4.0
com.apple.driver.AppleIntelPIIXATA          2.5.1
com.apple.driver.AppleUSBEHCI          5.1.5
com.apple.driver.AppleUSBUHCI          5.1.5
com.apple.driver.AppleEFINVRAM          1.6.1
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.7
com.apple.driver.AppleACPIButtons          1.6
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.6
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
com.apple.nke.applicationfirewall          4.0.39
com.apple.security.quarantine          2
com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
com.apple.driver.DspFuncLib          2.3.0f2
com.apple.iokit.IOAudioFamily          1.8.9fc9
com.apple.kext.OSvKernDSPLib          1.6
com.apple.kext.triggers          1.0
com.apple.iokit.IOSerialFamily          10.0.6
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.nvidia.nv50hal          8.0.0
com.apple.NVDAResman          8.0.0
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.driver.AppleHDAController          2.3.0f2
com.apple.iokit.IOHDAFamily          2.3.0f2
com.apple.iokit.IOSurface          86.0.2
com.apple.iokit.IOBluetoothFamily          4.0.9f8
com.apple.driver.AppleGraphicsControl          3.2.6
com.apple.iokit.IONDRVSupport          2.3.4
com.apple.iokit.IOGraphicsFamily          2.3.4
com.apple.driver.AppleSMC          3.1.3d11
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.driver.IOPlatformPluginFamily          5.2.0d16
com.apple.iokit.IOUSBHIDDriver          5.0.0
com.apple.driver.AppleUSBMergeNub          5.1.5
com.apple.driver.AppleUSBComposite          5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.1
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOATAPIProtocolTransport          3.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.1
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IOUSBUserClient          5.0.0
com.apple.iokit.IO80211Family          500.15
com.apple.iokit.IONetworkingFamily          3.0
com.apple.iokit.IOAHCIFamily          2.2.0
com.apple.iokit.IOATAFamily          2.5.1
com.apple.iokit.IOUSBFamily          5.1.6
com.apple.driver.AppleEFIRuntime          1.6.1
com.apple.iokit.IOHIDFamily          1.8.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          220
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          344
com.apple.iokit.IOStorageFamily          1.8
com.apple.driver.AppleKeyStore          28.18
com.apple.driver.AppleACPIPlatform          1.6
com.apple.iokit.IOPCIFamily          2.7
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0
Model: iMac8,1, BootROM IM81.00C1.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 2 GB, SMC 1.30f1
Graphics: NVIDIA GeForce 8800 GS, NVIDIA GeForce 8800 GS, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 800 MHz, 0x2C00000000000000, 0x38485446313238363448445A2D3830304531
Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 800 MHz, 0x2C00000000000000, 0x38485446313238363448445A2D3830304531
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.131.36.16)
Bluetooth: Version 4.0.9f8 10405, 2 service, 18 devices, 1 incoming serial ports
Serial ATA Device: WDC WD5000AAKS-40YGA1, 500.11 GB
Parallel ATA Device: MATSHITADVD-R   UJ-875
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd400000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1a100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x820f, 0x1a110000 / 5
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 2
USB Device: Hub in Apple Extended USB Keyboard, apple_vendor_id, 0x1002, 0x1d100000 / 2
USB Device: Trackball, 0x046d (Logitech Inc.), 0xc404, 0x1d120000 / 4
USB Device: Apple Extended USB Keyboard, apple_vendor_id, 0x0204, 0x1d110000 / 3

Bondi iMac 233 won't boot from hard drive,

I have a Bondi iMac 233, 192MB running OSX 10.3 which was being throw out at work, the hard drive (40GB IBM Deathstar) was failing but it would still boot up. I installed an original 6GB iMac Hard Drive, low level formated the drive and installed OS9.2. Now the iMac refuses to boot from this hard drive or even another 4GB Hard Drive.
The iMac will boot from CD and I can see and install a new OS onto the Hard Drive, OS9 or OSX, I can choose the drive under the Startup Control Panel but the computer refuses to boot from the Hard Drive.
I have zapped the PRAM,
Reset the NVRAM
Reset the CUDA chip.
Reset the Logic Board
Reseated Cables
Reseated Processor and memory modules
All to no avail.
Does anyone have any other ideas?
thanks
Bondi iMac Mac OS 9.2.x

I've been doing this with about 14 iMacs slot/tray that I'm prepping for inner city kindergartens in Chicago. I have had that problem where in moving from 10.3.9 to 9.2.2 the iMacs wouldn't recognize the HDs. Booting from an original iMac OS 9 install disc and selecting the HD as start up has always solved the problem for me.
However, and maybe this is related,
I've had the problem with a couple of tray loaders where in moving from 10 to 9 it wouldn't recognize the CD-ROM drive. I went through a bunch of drives before I figured out that booting from an iMac OS 8.6 CD made the iMac rerecognize the drive. I was able to reset?? all the drives that wouldn't previously work using this method. Weird but maybe there's a chip in the drive board that needed to be reset. Dunnno about the HDs tho' but it could be related.
Richard

Please Help :( iMac 20" refuses to boot up with anymore than 1gb ram?

Please Help iMac 20" refuses to boot up with anymore than 1gb ram? It was fine 4 days ago and had been working with a 1gb stick in one slot and a 2gb stick, which had replaced the orignal 1gb stick that I got it with, in the other and it had shown 3gb of ram and was working just fine with that since November? It went to sleep briefly 4 days ago while I was waiting on a customer and I came back to try to wake it up and it never would forcing me to hard boot it. When I did that it would only go to a black screen with a solid white light on the power indicator. Over and over again and same thing. I read and tried every suggestion I could possibly find in this and a few other mac forums to no avail.
I finally after reading about RAM issues etc. I decided to power off and take out the ram sticks and try them one at a time in each slot. So I took out the 2gb stick and did the SMC reset and it would boot up and work just fine with the 1 gb of ram. So then I went through the same process with the 2gb stick and it would not boot up only go to a black screen with white solid light again (NOT flashing). So then I tried the other original 1gb I had replaced with the 2gb and it worked just find like the other 1gb. So then I tried just 1gb stick in the other ram slot (back facing one) and with just the 1gb strip it booted up and worked fine. Tried it with the other 1gb stick and once again that one too worked just fine. So I determined it wasn't the slot itself I thought? I then tried the 2gb in the back slot and it would not boot only go to the black screen white solid light deal like before. So I thought well ok it's obviously the 2gb ram must have somehow went bad (even though I have only had it since November) and I thought well I will just use the (2) 1gb sticks in each slot and then that will at least give me 2gb because only 1gb really ***** LOL. So I proceeded to go through the same shut down process installed both sticks (I always push them to I feel them click and my fingers have a nice indention on them) reset the SMC and turned the power one and.... It would only go to the black screen with white solid light on power indicator???? I went through the same above process at least 3 times and again today a few times and I can't figure it out and I tried to search and search and I couldn't find anything like what I am experiencing.....What happened? Please help this slow Imac is killing me. It will work with 1gb ram only nothing more? Here are the specifics of my Imac.
It is a 20" Late 2006 Intel Core 2 Duo 2.16 ATI Radeon X1600 256 MB graphics card and Ram with now only 1gb (did have 3gb) and I am running OSX Lion 10.7.5
When I go to system report and go under memory it shows this:
BANK 0/DIMM0:
Size:          1 GB
Type:          DDR2 SDRAM
Speed:          667 MHz
Status:          OK
Manufacturer:          0xCE00000000000000
Part Number:          0x4D342037305432393533435A332D43453620
BANK 1/DIMM1:
Size:          Empty
Type:          Empty
Speed:          Empty
Status:          Empty
Manufacturer:          Empty
Part Number:          Empty
Serial Number:          Empty
Any help I can get would really be appreciated. Thanks in advance
ALSO...Here is also a pic of the system log right before it happened. It even changed the date to 07/2014????
I have some more if needed???????????????
<Personal Information Edited by Host>

The Memtest just completed and came back like this? It only test the single 1gb chip because anything more in this computer it won't go past the black screen with solid white power light.
Memtest version 4.22 (64-bit)
Copyright (C) 2004 Charles Cazabon
Copyright (C) 2004-2008 Tony Scaminaci (Macintosh port)
Licensed under the GNU General Public License version 2 only
NOTE: No command-line arguments have been specified
Using defaults: Test all available memory, one test pass, no logfile
Mac OS X 10.7.5 (11G63) running in multiuser mode
Memory Page Size: 4096
System has 2 Intel core(s) with SSE
Requested memory: 250MB (263086080 bytes)
Available memory: 250MB (263086080 bytes)
Allocated memory: 250MB (263086080 bytes) at local address 0x0000000101000000
Attempting memory lock... locked successfully
Partitioning memory into 2 comparison buffers...
Buffer A: 125MB (131543040 bytes) starts at local address 0x0000000101000000
Buffer B: 125MB (131543040 bytes) starts at local address 0x0000000108d73000
Running 1 test sequence... (CTRL-C to quit)
Test sequence 1 of 1:
Running tests on full 250MB region...
Stuck Address       : ok
Linear PRN          : ok
Running comparison tests using 125MB buffers...
Random Value        : ok
Compare XOR         : ok
Compare SUB         : ok
Compare MUL         : ok
Compare DIV         : ok
Compare OR          : ok
Compare AND         : ok
Sequential Increment: ok
Solid Bits          : ok
Block Sequential    : ok
Checkerboard        : ok
Bit Spread          : ok
Bit Flip            : ok
Walking Ones        : ok
Walking Zeroes      : ok
All tests passed! Execution time: 362 seconds.
logout
[Process completed]
Seems Okay I guess?

Adobe on Leopard, refuses to boot from disc, disaster?

After buying Adobe CS3 Web Premium, I found out I couldn't install it because my drive was formatted as case-sensitive. So, I was forced to backup all my important data and re-initialize. I zeroed the drive, but told it to skip zeroing just before it was done with the last little sliver in the progress bar.
So, I get all the whole system updated. Install Aperture, Thunderbird, Firefox... everything is going great. Then get the updates for Aperture, everything works flawlessly. I had never seen it run so well. Then I finally install CS3 and the install process seems to go without a hitch.
So, I've got CS3 on there, but I want to do some stuff with Aperture before I get into it. I'm working with Aperture and everything is going great. Good performance, really speedy. Then, I decide to open Illustrator CS3. To my horror, Aperture starts to go completely wrong. It gets to the point where I can't use it for longer than 30 seconds without having it crash. So, I quit Illustrator and the problem persists. Finally, I decide to restart the machine, Aperture seems to have fixed itself with restart, everything seems to be alright, for now.
Hmm, I think, maybe the CS3 needs to be updated. Yes, it did, 524 MB of updates. The installer downloads it all, starts the updating process and hangs silently (liquid in the progress bar still flowing). I get no notification except in Activity Monitor, where launchd and another process (I forget which) are going crazy with the CPU. I force-quit the updater from Activity Monitor, reopen it, press the install button again. It doesn't do anything, so I found out I actually have to say "Delete All" as in, delete all the downloaded updates. Then the updater quits itself and I have to reopen it and redownload and install whatever the installer thinks didn't get updated. I had to force quit, delete all, redownload, and install about 5 times before it said it was through.
Oh man, that was bad. Now the whole machine is pretty much a sluggish mess. Naturally, I thought, "I'll run Disk Warrior." I had run it with an earlier version of Leopard before, so I expected it to work. Insert Disk Warrior, Restart, hold C key, disc spins for a second and ejects itself. System ignores my command and boots from hard drive.
But everything loads and things seem alright, so I think, "oh well, I guess everything is alright." I do some work in Illustrator, everything seems good. Listening to music, but not working in Aperture. The machine works great for about 2 days. Then, I decided I want to install Final Cut - I put in the Install DVD, it spins for a second and spins back down, nothing happens. No desktop icon, no optical drive showing up in Disk Utility, Eject button on keyboard doesn't work, iTunes - control > Eject Disc, now my iTunes is hung. I try to force quit, nothing happens. Force quit dialog, iTunes is listed as if it hasn't crashed, click force quit, it remains in the list. iTunes icon remains in the dock, arrow still below, but does nothing when I click it and won't poof. iTunes doesn't show up in Activity Monitor.
Okay, "definitely gonna try Disk Warrior again," I think to myself. Restart, reset PRAM twice, hold option to boot select screen, press eject to remove FCE disc, insert Disk Warrior, Disk Warrior icon shows up on screen, click it, click the arrow to boot to it. Wait a second - BSOD, no cursor! Disc spins for a while and stops. Press any key, it spins back up again and eventually dies down again, doing nothing. Forced shutdown holding power button, press power again, hold the C key to boot to disc. Disk Warrior spins up again and spits itself out, just as before. System boots to hard drive instead.
What am I doing wrong? The Mac Pros at school run Leopard and CS3 and they seem to be flawless. Am I the only one having these problems? I can't figure out if this is hardware or software. I'm currently creating an image of the Disk Warrior disc. I plan to restore it to my hard drive's second partition and see what happens. I'll let you know what happens. Until then, can anybody give me any hints on what might be wrong with my system or at least give me some sympathy? LOL. This is beyond frustrating.
I'd had my system ignore what seemed like successful insertion of optical discs and refuse to eject them before the fresh install, but I've never had it refuse to boot from a bootable disc like this. Any ideas?

Excuse me, it seems there is some data in the CrashReporter log for VersionCueCS3. I had forgotten to remove my search filter keyword.
This is a copy of the top section (which seems like it might be the most significant). If you want to see the rest, I'll gladly post it as well:
Process: VersionCueCS3Status [1577]
Path: /Library/Application Support/Adobe/Adobe Version Cue CS3/Server/bin/VersionCueCS3Status.app/Contents/MacOS/VersionCueCS3Status
Identifier: VersionCueCS3Status
Version: ??? (???)
Code Type: X86 (Native)
Parent Process: launchd [1]
Date/Time: 2008-09-10 20:41:58.527 -0500
OS Version: Mac OS X 10.5.4 (9E17)
Report Version: 6
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Crashed Thread: 0
Thread 0 Crashed:
0 libSystem.B.dylib 0x90256b9e __kill + 10
1 libSystem.B.dylib 0x902cdec2 raise + 26
2 libSystem.B.dylib 0x902dd47f abort + 73
3 libstdc++.6.dylib 0x948f9005 0x948b1000 + 294917
4 libstdc++.6.dylib 0x948f710c _gxx_personalityv0 + 1108
5 libstdc++.6.dylib 0x948f714b std::terminate() + 29
6 libstdc++.6.dylib 0x948f7261 _cxathrow + 101
7 ....versioncueCS3.VCStatusMenu 0x00005a11 start + 14545
8 ....versioncueCS3.VCStatusMenu 0x00005a39 start + 14585
9 ....versioncueCS3.VCStatusMenu 0x000e6be5 0x1000 + 941029
10 ....versioncueCS3.VCStatusMenu 0x00003fcd start + 7821
11 ....versioncueCS3.VCStatusMenu 0x0000374a start + 5642
12 com.apple.Foundation 0x92f241aa -[NSObject(NSKeyValueCoding) valueForKey:] + 250
13 com.apple.Foundation 0x92f51d2a -[NSObject(NSKeyValueCoding) valueForKeyPath:] + 474
14 com.apple.AppKit 0x953a3cd4 -[NSBinder _valueForKeyPath:ofObject:mode:raisesForNotApplicableKeys:] + 876
15 com.apple.AppKit 0x953a38dc -[NSBinder valueForBinding:resolveMarkersToPlaceholders:] + 192
16 com.apple.AppKit 0x956e07bb -[NSObjectDetailBinder refreshDetailContent] + 96
17 com.apple.AppKit 0x953a2e77 -[NSBinder _performConnectionEstablishedRefresh] + 79
18 com.apple.AppKit 0x9539b0e8 -[NSObject(NSKeyValueBindingCreation) bind:toObject:withKeyPath:options:] + 744
19 com.apple.AppKit 0x953d771e -[NSNibBindingConnector establishConnection] + 166
20 com.apple.AppKit 0x951aeaa4 -[NSIBObjectData nibInstantiateWithOwner:topLevelObjects:] + 1211
21 com.apple.AppKit 0x951a4e12 loadNib + 264
22 com.apple.AppKit 0x951a4774 +[NSBundle(NSNibLoading) _loadNibFile:nameTable:withZone:ownerBundle:] + 946
23 com.apple.AppKit 0x951a43b7 +[NSBundle(NSNibLoading) loadNibFile:externalNameTable:withZone:] + 171
24 com.apple.AppKit 0x951a42f5 +[NSBundle(NSNibLoading) loadNibNamed:owner:] + 391
25 com.apple.AppKit 0x951a3fa4 NSApplicationMain + 434
26 ....versioncueCS3.VCStatusMenu 0x000028d1 start + 1937
27 ....versioncueCS3.VCStatusMenu 0x00002242 start + 258
28 ....versioncueCS3.VCStatusMenu 0x00002169 start + 41
Thread 1:
0 libSystem.B.dylib 0x901e8506 semaphoretimedwait_signaltrap + 10
1 libSystem.B.dylib 0x9021a84f pthread_condwait + 1244
2 libSystem.B.dylib 0x9021c0d3 pthreadcond_timedwait_relativenp + 47
3 com.apple.Foundation 0x92f46e8c -[NSCondition waitUntilDate:] + 236
4 com.apple.Foundation 0x92f46ca0 -[NSConditionLock lockWhenCondition:beforeDate:] + 144
5 com.apple.Foundation 0x92f46c05 -[NSConditionLock lockWhenCondition:] + 69
6 ....versioncueCS3.VCStatusMenu 0x0002720d devtech_private::ZString::ZString(char const*, unsigned long, devtech::EncodingInfo const*) + 339
7 ....versioncueCS3.VCStatusMenu 0x0001d215 devtech::ZString::GetCString(char*, unsigned long, bool, devtech::EncodingInfo*) const + 2485
8 ....versioncueCS3.VCStatusMenu 0x00025738 devtech::ZString::GetCString(char*, unsigned long, bool, devtech::EncodingInfo*) const + 36568
9 com.apple.Foundation 0x92f00f1d -[NSThread main] + 45
10 com.apple.Foundation 0x92f00ac4 _NSThread__main_ + 308
11 libSystem.B.dylib 0x902196f5 pthreadstart + 321
12 libSystem.B.dylib 0x902195b2 thread_start + 34
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0x00000000 ebx: 0x902dd43f ecx: 0xbffff39c edx: 0x90256b9e
edi: 0x00115500 esi: 0xa0025578 ebp: 0xbffff3b8 esp: 0xbffff39c
ss: 0x0000001f efl: 0x00000286 eip: 0x90256b9e cs: 0x00000007
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
cr2: 0xffe173cc
I suppose it would make sense that when items like com.apple.Foudation and com.apple.AppKit go wrong, the problems would spread system-wide.

IBook Won't Boot From ANY Optical Disk - correct forum this time sorry.

My trusty old iBook circa mid 2005 is overdue for an overhaul but refuses to boot in Target disc mode or boot from any of my install disks, 10 or 10.3 or 10.4. When I choose the disk from Startup Disk it begins to reboot until the Apple screen comes up with some pixelly artifacts onscreen and it hangs. Holding the 'C' key down does nothing. Please help I need to wipe this baby clean and start from scratch.

Hey Craig,
Here's my pics of where the GPU sits from an earlier discussion:
"This is the position of the GPU on top. That bay right below is where the hard drive goes and that's it's connector lower right:
http://s291.photobucket.com/albums/ll306/spudnuty/?action=view&current=13312GPUt op.jpg
Here's a view with the heat sink in place and a ghost image of the GPU:
http://s291.photobucket.com/albums/ll306/spudnuty/?action=view&current=13312iBoo kGPUheatsink.jpg
The spot where I'd recommend applying pressure from underneath:
http://s291.photobucket.com/albums/ll306/spudnuty/?action=view&current=13312GPUu nderneath.jpg
and where that spot is on the lower shield:
http://s291.photobucket.com/albums/ll306/spudnuty/?action=view&current=133GPUBot tomshield.jpg
So to access that you'd take the lower case off. Go to ifixit for that.
If that solves your problem or makes it better it will run like that for a while. If it gets worse you'd need to reball it. $79 plus shipping one way in the States."
Richard
Message was edited by: spudnuty

IMac G5 won't boot from CD drive, Please Help

My iMac G5 won't boot from the CD drive. There is no operating system on the hard drive so I want to install a fresh copy of Leopard. I have tried a couple different methods, but I keep getting the same end result. The first method I tried was booting from the CD drive by holding the C key during start up. The Leopard disc was automatically ejected after about 20-30 seconds. The second method I tried was booting the iMac to the "question mark file screen," which is when I inserted the Leopard disc. Usually on other Mac computers, this is when the computer will show the Apple logo and prompt you with the installation process. Not this iMac, it just ejects the disc shortly after I insert it. I'm not sure if it's the CD drive that is having the issue, the hard drive, or something else.
If you have any ideas, they would be greatly appreciated!
Thank you,
Chris

Where did you get the CD from?
If it is from another Mac, it is probably specific to the hardware in that Mac and is not capable of boot your iMac.
Allan

Cannot boot from any bootable CDs.

I have a flat panel Imac g4 and have already reset pram/nvram. This mac won't boot from any cd's. I hear no spinning of the drive either. The screen just comes up gray and I get the folder showing a question mark alternating with the system face on the folder. I really just want to be able to boot from but the cd to try to format the drive but the cd doesn't seem to be working either. Any suggestions would be great.
Thanks
imac g3 os 9.2, Mac OS X (10.4.6)

Hi Mazz
I have an old G4 iMac as well as my Macbook and I have just had this very thing happen to my iMac. I was told it was the hard drive that has died on me. I'm waiting for my new hard drive to turn up to fit it but I feel I have lost ALL the data on the old drive. I'm lucky I have all the very important files on my Macbook.
I hope this helps you out.

Cannot Boot From ANY Optical Install Disk

My trusty old iBook circa mid 2005 is overdue for an overhaul but refuses to boot in Target disc mode or boot from any of my install disks, 10 or 10.3 or 10.4. When I choose the disk from Startup Disk it begins to reboot until the Apple screen comes up with some pixelly artifacts onscreen and it hangs. Holding the 'C' key down does nothing. Please help I need to wipe this baby clean and start from scratch.
Message was edited by: Craig Harvieux

If you are interested in the resolution to this question go to the thread in 'Using Your iBook'

G4 that will not boot from any disc EXCEPT the Apple Hardware Test CD

We have a DP 1ghz Quicksilver PowerMac G4 that will not boot from any disc EXCEPT the Apple Hardware Test CD that came with the machine.
We were in the process of installing 10.4 Tiger before placing it for sale.
The Mac was originally OSX Server 10.1 that we later converted to a worksation running 10.3 Panther.
It has 1 GB of memory, 80GB hardrive, 250MB Zip Drive and a Radeon 7500 video card.
Since this machine only has a CD-R drive and not a DVD-R, we installed Tiger using another Mac via Target Disk Mode. The installation process went well, but when I tried to reboot I got a Kernel Panic right after startup screen with the grey Apple logo.
On some reboots we get to the blue startup screen, others it stops at the grey Apple logo, others a black box like the a Kernel Panic - but with no text. Twice it went directly into Open Firmware.
We have done the following during our troubleshooting:
- Reseat RAM, Video Card, Hard Drive, Zip & CD-R connections
- Remove RAM 1 stick at a time and reboot
- Replace RAM with RAM from another working Quicksilver
- Replace Video Card with one from another working Quicksilver
- Zap PRAM
- Reset CUDA switch
- Unplug the MAC and remove everything (RAM, Battery, etc) for 30 minutes and try to reboot
- Tried booting from the Macintosh Server G4 Software Restore CD
- Tried booting from Mac OS X Server CD
- Tried booting from AppleCare Protection Plan CD with TechTool
- Tried booting from Diskwarrior CD
- Tried booting from an external FireWire drive with a disk image of Tiger OS Install
- Tried booting with the hard drive disconnected
The Mac WILL boot from the Apple Hardware Test CD and will pass ALL of the extended tests.

Conventional wisdom says that any Mac that will not boot up from a System/Install CD OS 9 or an Install CD Mac OS X, has a Hardware problem.
The diagnostic CD is a red herring because it uses a very primitive method of reading the CD, and so does not properly represent the machines general ability to read CDs.
I would look at the CD drive cables, etc, and see if another drive gives different results.
You have not mentioned using the Startup Manager (option key at Startup) to do any checking:
HT1310- Startup Manager: How to select a startup volume

IMac G3 REFUSES to boot from any cd.

Similar Messages

Maybe you are looking for