Imac g4 blue screen need help!!

hello,
i have an imac g4 1,250, 20" flatpanel, it power's up i hear a chime the screen lights up but seems dark blue, there is no operating system on it i have a cd mac osx 10.1.3 first of all will this install on the imac, and if so can you please tell me how, i have a wireless keyboard and mose from apple, i have a d-link bluetooth adapter, is this what i need??
thats it for now, please help
thank you
keyro35
imac g4 Mac OS X (10.1.x)

Mr Totes is quite right, the 10.1.3 disk will not work. Contact the original seller for the disks that came with the machine. Among other things, they can be used to troubleshoot problems with the machine should they arise (chances are they won't but they can be useful, especially in detecting if the RAM usable and other factors). They are not rightfully his when he sells the machine and ONLY licensed for use with that machine. If he lost the disks, he should call AppleCare for replacements.
Once you have identified which iMac you have from my FAQ:
http://www.macmaps.com/macosxnative.html#IDENTIFY
You’ll have the knowledge necessary to call AppleCare and request the disks yourself if you can’t reach the seller. This knowledge is also important later on.
If you can reach him, the number he should contact is one from his own country.
In Canada, the number for AppleCare is
1-800-263-3394
In the U.S. it is:
1-800-APLCARE
Overseas numbers are here:
http://www.apple.com/contact/phone_contacts.html
Make sure you get the correct RAM according to the spec database based on the Mac model identified above:
http://www.info.apple.com/support/applespec.html
and update it to at least 512 MB if not 1 GB. The installation if necessary is best done by an authorized service technician, especially on the iMac G4 models since those RAM slots tend to be quite fragile. Run the hardware test that came with the restore disks. Some come with their own Hardware Test CD that is silver colored, while others come with a volume like the Powerbook, except labeled iMac restore disk. The restore disk instructions for the Powerbook apply to iMacs as well:
http://docs.info.apple.com/article.html?artnum=86287
If the hardware test appears OK, you’ll be ready to run the Tiger installation with an erase and install:
http://docs.info.apple.com/article.html?artnum=301270
And everything then should work.
Good luck, and let us know if you get stuck along the way!
In the future always be careful when buying used and refurbished Macs, by following these instructions in my FAQ:
http://www.macmaps.com/usedrefurbished.html

Similar Messages

7.1 update iphone 5s phone won't work apple logo and blue screen need help

My phone won't work after updating 7.1
Has apple logo with blue screen what to do

If you mean the iTunes logo and a usb cable, you need to connect the phone to a computer with iTunes on it. The device is in recovery mode.

I have the dreaded blue screen need HELP????!

I was just downloading the updates and then the computer restarted and the screen is blue, mouse still works. I was looking at other articles for bluescreen but it was for an installation of Leopard problem. The program I have in my computer is 10.2.3.Somebody wrote to hold down control and s. it took me to single user type screen that looked like MSDOS. I put /sbin/fsck -fy which they stated to do. I pressed enter it said something but I forgot what. I restarted the computer and now when it is loading up it stops when it says waiting for application services. I think I dug myself in a bigger whole when I typed that stuff in the MSDOS type screen. SOMEBODY PLEASE PLEASE HELP ME OUT OF THIS WHOLE?

Hello Again cosmikx!
Also refer to My Reply, in your other related Topic here Stuck on Searching Directory Services while loading Please HELP! URGENT.
ali b

My screen is completely white, i've tried holding lock and home buttons as seen on you tube something called 'white screen of death' its goes black (think it switches off) then back to the white screen need help fast please!

my screen is completely white, i've tried holding lock and home buttons as seen on you tube something called 'white screen of death' its goes black (think it switches off) then back to the white screen need help fast please!

If you have not done a factory reset on the device, I recommend doing a complete factory reset.
Factory Reset - Warning this will reset device back to original factory settings.
This method will not erase any MDN/MIN information
Turn off the phone
Press Power + Volume Up/Down at the same time and hold until display will show a triage android screen
Display will show:
Reboot system Now
Apply sdcard:update.zip
Wipe Data/Factory Reset
Wipe Cache Partition
Use VOL Down key to scroll down to "Wipe Data/Factory Reset", press home icon to select option and wipe device.
Display shows "All user data will be wiped out", press VOLUME Up to continue or VOLUME Down to exit.
Press Volume Up
Press Home to select "Reset System Now" - device will reboot
If the problem persist I recommend having a store technician take a look at the device.
Copy and paste the link below into your browser's address bar for the store locator.
http://www.verizonwireless.com/b2c/storelocator/index.jsp

After trying to update to ios6 my ipod touch will go from logo to blue screen, any help?

after trying to update to ios6 my ipod touch will go from logo to blue screen, any help?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My mom and I both have iphone5 but when I send her messages they aren't blue but any other iphone I text is blue I need help to get that fixed

My mom and I both have iphone5 but when I send her messages they aren't blue but any other iphone I text is blue I need help to get that fixed

Both of you need to have iMessage activated, and both have to have active Internet connection for iMessage. Are you both using the same Apple ID? Are you using the phone number or Apple ID for messages?

Desktop will not load, stuck on blue screen -- please help!

As I can see, many other Mac users have encountered the same problem that I now have: the dreaded ‘blue screen of death’. About a week ago, any internet browser that I tried to open (Safari, Firefox) would freeze after loading its home page, and tell me that the application was not responding. After force quitting and restarting each program a couple of times, with no positive response, I decided to restart my computer to see if that would do the trick. Upon booting up, it then started the same sequence that it is still doing now: first a grey screen will briefly show, then a white screen with the apple logo and a turning dial beneath it, followed by a blue screen which will show a window that says “Starting Mac OS X” with a progress bar beneath it, which will fill to various points (sometimes only 1/8 of the way, while other times it fills completely), but it always leads me to the same screen – solid blue with a black arrow that will occasionally be replaced with a turning dial, only to go back to the arrow again. I am using a PowerBook G4 with the Tiger version of OS X. No applications were running whenever I first decided to restart my computer, and to my knowledge, all software and security patches were up to date and fully installed.
I’ve researched and tried every possible option that I’ve come across, listed below with the results they yielded (if any):
 Holding the Command/Option/P/R keys upon startup (screen stays blank, and the computer continues to ‘chime’ until I release the keys. I have allowed it to chime a couple of times before I stop holding the keys, but it always leads me back to the same blue screen)
 Holding the Shift key upon startup (leads me to a screen that has an icon of my hard drive and two arrows. Clicking the left arrow does nothing, the hard drive icon does not respond to being clicked, and the right arrow starts the loading process which again ends with the blue screen)
 With the first OS X Installation disc that came with my computer inserted into the disc drive, holding the C key (nothing happens; sequence as normal)
 With the first OS X Installation disc that came with my computer inserted into the disc drive, holding the Option key (same results as holding shift key with no disc)
 With the first OS X Installation disc that came with my computer inserted into the disc drive, holding Option/Command/Shift/Delete (a grey screen appears with the icon of a folder, a question mark briefly flashes before being replaced by the two-toned blue face Mac logo. After continuing to hold the keys with this folder and face on the screen, I get no response, so release the keys and the computer continues to enter the white screen-blue screen sequence)
 Holding the Command/Option/O/F keys upon startup (a white screen appears, and following advice I have seen on other forums a type ‘reset-nvram’, then return, then ‘reset-all’, then return. The computer reboots and the sequence continues as usual. I have also tried holding the Command/Option/P/R to reset the PRAM immediately after leaving the white Open Firmware screen, allow the chime to sound a couple of times as before, but still I get no results)
 While on the blue screen, pressing the Command/Shift/Q keys (alas, I am the only user on the computer, so I cannot try to remedy my problem by signing into another account. From the screen the appears, I can either shut down, restart, or put my computer to sleep, or enter my password which leads me back to the same blue screen again)
I apologize in advance if I’ve included a lot of extraneous information, but I just wanted to cover the options I’ve already explored so as not to waste your time if you had any of these in mind. I’m going to post this on a few different forums just to make sure I have all my bases covered, but anything you have to offer in the way of suggestions would be greatly appreciated. If you could post your advice in layman’s terms that would be even more helpful; I’ll probably need exact, step-by-step instructions if required to start my computer in ‘safe mode’ or anything else an average user would not be familiar with. I know this is a lot to ask, so I thank you in advance for taking the time to read through this and offer any solutions that you may have.

Hi amnicolekidman, and a warm welcome to the forums!
Although you don't specify your Mac, it sounds like you have real HW problems, likely the HD.
Tough without a Tiger Disk, but try fsck...
To use fsck, you must run it from the command line. Unlike using your mouse to open an application to do something, you'll need to type a text command at the prompt (#) to tell fsck what to do. The Terminal application (/Applications/Utilities) and single-user mode are two examples of command-line interfaces in which you can type such commands. To use fsck:
1. Start up your computer in single-user mode to reach the command line. Hold CMD+s keys down at bootup. Note: If necessary, perform a forced restart as described in the Emergency Troubleshooting Handbook that came with your computer. On desktop computers, you can do this by pressing the reset/interrupt button (if there is one) or holding down the power button for several seconds. On portable computers, simultaneously press the Command-Control-power keys. If your portable computer doesn't restart with this method, you may need to reset the Power Manager.
2. At the command-line prompt, type /sbin/fsck -fy
3. Press Return. fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issue is found: ** The volume (nameofvolume) appears to be OK  If fsck found issues and has altered, repaired, or fixed anything, it will display this message: *** FILE SYSTEM WAS MODIFIED ***   Important: If this message appears, repeat the fsck command you typed in step 2 until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do).
4. When fsck reports that your volume is OK, type reboot at the prompt and then press Return.
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot , (holding Shift key down at bootup), off the HD & use Disk Utility from there to Repair Permissions, reboot once more.

Imac Flashing blue screen

23" iMac from 08 or 09 suddenly started flashing a blue screen in early January. Took it into to the apple store they said they couldn't emulate the problem but they did some software updates "so hopefully that fixed the problem". It didn't. I ended taking it again, still they couldn't find the problem. I really frustrated now. Here are the things that I've tried on my own:
I updated all my software and reset permissions.
I used chrome, but at the apple store while running test they only used Safari. SO I thought Chrome might be the problem. I un-installed it. But still have the same issue.
I also noticed at the apple store they use their own power cord, I knew it might be a long shot but I bought a new power cord, didn't work.
Ive completely cleared and re-installed the operating system and didn't put any of my old file or programs on it thinking they might be the culprits, but no still flashing blue.
I've tried looking through post with other people that have the a similar issue, but they all seem to be connected to an external monitor which I do not have.

My Apple care just expired in February but I'm in contact with apple trying to figure something out since I took the computer to them twice before it expired but they couldn't figure it out.
I don't understand why at home it flashes like crazy but at the store it's fine. I downloaded the istat program, I'm not really sure what is normal but I feel like the room where I keep my computer is relativley cool and I don't think that's the problem. Here are the stats on my computer it has been running for about an hour with video running in the background while I browse the web (and yes it is currently flashing):
After doing some more research I also think It has to be the graphics cards, i'll talk to apple about it this weekend and see what I can do.
Thanks for the help guys! and sorry for all the typos in my first post, yikes!

HP Pavilion a6000 desktop with Vista black screen - need help please!

I have an HP Pavilion a6000 desktop with Vista. Yesterday it was working fine and today we have the black screen that reads:
Award BootBlock BIOS v1.0
Copyright (c) 2000, Award Software, Inc.
BIOS ROM checksum error
Detecting IDE ATAPI device...
Found CDROM, try to boot from it...Fail
Detecting IDE ATAPI device...
Detecting IDE ATAPI device...
Detecting floppy drive A media...
Drive A error. System halt
I am not a techie, but looked at online forums and have tried f10 at startup with no change to the screen other than it stops after the first four lines and does not try the floppy drive. I also pulled out the round battery, waited and then reintstalled. Same problem.
Also, computer emits a single, repeating beep after startup.
HELP!

jjeahall
I saw your post and wanted to comment. I'm not an expert on these types of situations but did some digging around and found the following at Tips4PC.com.... read below
"There are two types of computer black screens that can appear in Windows. One where the computer will not boot up but you have a beep sequence sounding to let you know what the problem could be, and the other has nothing at all. No beeps, no cursor, no logo screen, and no choice to boot to safe mode or access the bios.
If your computer will not boot up and you get a beep sequence, I am not saying it is good news, however it is a step in the right direction towards solving this problem. This is a message from your computer that can be understood by looking up your bios (the brand) beep code. For example you may have an Award Bios, Ami Bios, Phoenix BIOS, Compaq, Dell, or Acer Bios. This list goes on and on. You can search for Bios beep codes in Google. Here is an example of results in Google search"
Link
Also I went into the Troubleshooting Guide for the A6000 and found the following information. You need to use F11 for recovery. See below
Starting System Recovery from system startup
1
Turn off the computer. If necessary, press and hold the On button until the computer
turns off.
2
Remove the HP Personal Media Drive if your computer includes one. Disconnect all
peripheral devices from the computer except the monitor, the keyboard, and the
mouse.
3
Press the On button to turn on the computer.
4
During the startup, do the following to enter the Recovery Manager program:
When the blue screen with the HP Invent logo appears, press the F11 key on the
keyboard. (You have only a few seconds to press the F11 key before the normal
startup process continues.)
5
The computer starts the Recovery Manager program; wait for the onscreen instructions
to display, and then follow those instructions.
6
Complete the computer startup, finish the registration process, and wait until you see
the desktop. Then, turn off the computer, reconnect all peripheral devices, and turn on
the computer.
I am an HP employee.
Regards,
Cooper56
If you’ve found this information helpful, please make it easier for others who might be experiencing a similar type issue by marking my answer as “Accept as Solution” .
***Of course you can also Click on “Kudos” STAR to say thanks!***
I work for HP. When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!

NEO2-FIS2R ATI 9800 AIW Pro TV Tuner causes freezes/blue screens. Help!

I recently upgraded my system from P4 2.4Ghz to P4 3.4Ghz Northwood and went from All in Wonder Radeon to 9800 AIW Pro. Only other change worth mentioning is I created a 0+1 RAID using 4 hard drives which were previously configured differently. I watch a lot of TV while I work on the computer. I do a lot of disk writes and data management which ultimately creates a lot of transfering of data between disks. Never was a problem in the old config. BTW, I also use an external HD conntected through USB for data transfers as well.
Immediately, my system went from stable to unstable. I first noticed that the destop redraw on bootup was slower. Then I noticed that the TV had a delayed response on changing channels and changing volume. Switching to another window causes a slow redraw and sometimes causes a jerk in the TV display like a hickup. Other symptoms include blue screens but no driver is referenced. The blue screen otherwise is a normal STOP screen except for the bottom quarter of the monitor which looks like video garble. Sometimes it just reboots. Sometimes, it freezes. I noticed that doing disk transfers while watching TV usually speeds up the behavior. Comparatively, my use of the TV in the old config was transparent regarless of how much I taxed the system.
Anyway, in view of the unexpected behavior, I decided to backup and reinstall the OS from scratch using a vanilla install method. Everything was detected properly, OS installed fine. Installed ATI's latest Catalyst drivers. I turn on the TV and within about 15 minutes of use, the erratic behavior begins. I figured it was a bad card so I exchanged it out. Same thing with the new card. ATI is shrugging their shoulders and pointing at MSI.
I ran hardware tests, updated the MB BIOS to latest available. Tested all four hard drives/RAM. I can't find any hardware issues. I'm very conservative with my BIOS settings so aside from the default values, I have only changed the settings required to allow for a 0+1 RAID config on the Promise controller.
I put my old ATI Radeon back in and ran the TV for hours and had no problems at all. I also swapped my old 2.4 back in with the 9800 AIW Pro and the problem is recreated so that is what has me ruling out the processor.
Here's what the box looks like inside.
Antec 480 True Blue
MSI NEO2-FIS2R (w/latest BIOS)
1GB Corsair VS512MB400 x 2
4 Maxtor 160GB hard drives, 8MB Cache, 2ea SATA, 2ea PATA
Intel 3.4Ghz Northwood CPU, 512KB, 800FSB w/Zalman 7700CU HS/F
ATI 9800 AIW Pro 128MB DDR
Front/Rear 120mm Case Fans
Optical drive, floppy drive, modem card, sound card.
NOTE: All USB ports are being used by devices with their own power supply except for a web camera. All fans are using power from PSU. No fans use MB power.
I also checked to insure that the AGP card was seated correctly and verified that it was. So, I'm pretty bummed out that I just dropped circa $500 on improving my system but I can't even get it work as well as it used to.
I think I have found the problem but short of getting rid of the 9800 AIW Pro, I am hoping that someone else has had this problem and can help me out. Your ideas would be greatly appreciated!!!

Good News!!
While the DDR voltage was set to 2.7, I recreated the conditions in which the failures tended to occur. Within minutes, it was obvious that something had changed as I had never gone that far without getting kicked out, freezing up, or blue screening. Since this is looking more and more like a power issue, I decided to leave all of my external USB connections disconnected except for the external hard drive because I normally transfer data back and forth frequently from it.
When I saw that the system was holding up well, I connected the rest of the USB connections. Everything ran OK for a few minutes but then the sound from the TV dropped out while the picture continued to function. Although, this marked another failure, it was a marked improvement over what had been happening previously.
NovJoe suggested tweaking the voltage to 2.7 ~ 2.8 so I upped the voltage to 2.8 and setup the same environment and the machine has run that way for about 3 hours. That one increment seems to have made a difference.
Questions which come to mind.
1. If this is a power issue, is it the motherboard's inability to supply the correct voltage to the motherboard components or is it a PSU issue which isn't providing the motherboard enough juice to do its job or a combination of both?
2. If this issue can be corrected through tweaking voltages, how do you know how far to go before damaging system components?
One of the original symptoms with the TV is still apparent. Upon changing channels, there is a second delay before the sound and picture synchronize. Changing foreground windows also causes a "hickup" in the TV's sound/video. I'm more concerned with what this behavior may mean from a system performance standpoint rather than the annoyance since this is a 9800 AIW Pro and it should be snappy instead of sluggish.
Up the AGP voltage? On that subject, the people here seem to have a lot of background with tweaking the BIOS. I'd appreciate any other ideas in tweaking this system as well.
Ultimately, I have to answer the question of whether I need to get a bigger PSU or can I safely correct my system performance by using BIOS tweaks?
Thanks again for all your help.

Imac 17" Blue screen

I have an imac, it starts up and just goes to a blue screen. this is once it has gone past the spinnng cog. no login screen appears. it works fine in safe boot. I think the graphics card is having a hard time initializing. rather it is faulty! hen I remove the nvidia drivers it boots B&W if I could get it to load the safe boot drivers it would atleast be useable. anyone know how to do this? btw it has a clean OS and a new Hd. memory has also been changed.

Does anything in Apple doc.#106464 help?
Also, try using Disk Utility to repair your startup disk (hard drive) as shown in Dr.Smokes Resolving Disk, Permission, and Cache Corruption. His link will help walk you thru it.
Cheers!
DALE

MacBook Pro "15 2011 model has started crashing. Symptoms: screen distortion/images fragmenting/blue screening. Help!

Hi everyone!
I currently own a Macbook Pro '15, 4gb that was purchased in early 2011 running Snow Leopard (my version is currently 10.6.8). For under the past 3 year it has been heavily reliable, and I have not ran in to any software, or hardware issues. However, over the past 3 or so months I have been having issues.
During May 2014 through to present date I have started experiencing screen glitches. It first began with image distortion, causing the whole system to crash, which would mean I would have to turn it off and reboot the system. Later this turned into a series of screen blurring (consisting of images fragmenting all over the place) and then finally followed with 2 weeks of blue screening on start up, meaning that I could not get into my log user unless I entered safe mode. I should also mention that I have no third party issues.
After doing some considerable research on apple forums I did what had to be done. In the last two weeks I have wiped my MacBook Pro, re-installed the OS and considered that it was now a process of elimination. For the first week the software seemed to been running smoothly, I wasn't having any failings until I hit the second week – of course, the glitches began all over again and I faced two in the space of a half hour (first my screen split into two during listening to music on spotify with no other applications open in the background, shortly after rebooting I faced a much worse case of my Mac completely dark blue screening with white lines.)
Now, once again, it only works 'well' on safe mode. I did a check in both modes. Left my computer idle with no programmes running for a half hour and the same thing happened with the screen, went black for a moment, moved the mouse and I received a fragmented screen again. I'm completely fed up at this point, considering I have the bare minimal amount on my Mac, I honestly can't fathom how it's come to this.
Now considering my model is not even three years old at this stage you can fully understand my frustration since I heavily rely on my laptop for educational purposes, which is making it very difficult to be able to concentrate on any of my studies. If anything, it is causing a great deal of stress. With my product being out of warranty I don't have an obscene amount of money to pay for a new one. When I already paid roughly £1,699 for the product in the first place.
The worst thing is, I've even done a EtreCheck, this was yesterday (the most recent/last time it was in use)
Hardware Information:
MacBook Pro (15-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,2
1 2 GHz Intel Core i7 CPU: 4 cores
4 GB RAM
Video Information:
AMD Radeon HD 6490M - VRAM: 256 MB
Color LCD 1440 x 900
Intel HD Graphics 3000 - VRAM: 384 MB
System Software:
Mac OS X 10.6.8 (10K549) - Uptime: 0 days 0:17:11
Disk Information:
Hitachi HTS545050B9A302 disk0 : (465.76 GB)
- (disk0s1) <not mounted>: 200 MB
Macintosh HD (disk0s2) / [Startup]: 465.44 GB (152.43 GB free)
MATSHITADVD-R   UJ-898
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information:
Apple, Inc. MacBook Pro
Launch Daemons:
[not loaded] com.adobe.fpsaud.plist Support
[not loaded] com.adobe.SwitchBoard.plist Support
[not loaded] com.microsoft.office.licensing.helper.plist Support
[not loaded] org.eyebeam.SelfControl.plist Support
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[not loaded] com.hp.messagecenter.launcher.plist Support
User Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[not loaded] com.google.keystone.agent.plist Support
[not loaded] com.spotify.webhelper.plist Support
User Login Items:
GrowlHelperApp
iTunesHelper
Internet Plug-ins:
JavaAppletPlugin: Version: 13.9.8 - SDK 10.6 Check version
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
QuickTime Plugin: Version: 7.6.6
Flash Player: Version: 14.0.0.145 - SDK 10.6 Support
SharePointBrowserPlugin: Version: 14.1.0 Support
OnLiveGameClientDetector: Version: OnLiveGameClientDetector 1.0.0 Support
Silverlight: Version: 5.0.61118.0 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.7
Safari Extensions:
Missing e: Version: 2.14.3
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.2
User Internet Plug-ins:
Picasa: Version: 1.0 - SDK 10.4 Support
3rd Party Preference Panes:
Flash Player Support
Growl Support
Top Processes by CPU:
      6% WindowServer
      1% fontd
      0% soffice
      0% coreservicesd
      0% usbmuxd
Top Processes by Memory:
344 MB WebProcess
143 MB Safari
135 MB soffice
53 MB iCal
45 MB WindowServer
Virtual Memory Information:
1001 MB Free RAM
584 MB Active RAM
381 MB Inactive RAM
2.07 GB Wired RAM
239 MB Page-ins
0 B Page-outs
I've had a look to book an appointment at the Genius Bar, but would you believe it, there are no available appointments at my local store! I really would appreciate if anyone could offer any assistance in how to lodge a formal complaint? My days rely on being able to do my work, so whilst I have tried to book a reservation I am at a loss, and pretty much screwed having a Mac that I clearly cannot use functionally.
If anyone can provide any help, I'd be absolutely most grateful!

I have done what you suggested. However, I have to disagree with you about the 'third party' comment. Although those minor issues were on there which I picked up on shortly afterwards, they were easily removed. It hasn't CHANGED the symptoms I described about my mac. Both items are removed (growl only tends to make your mac 'lag' and that's not the problem I'm having)
I am still having all the above issues, regardless of my mac being fully minus third party items. This mac hasn't had any heavy use, or had many applications installed on it ect, there is really no reason for it to be failing. I'd understand if it was old, but it's literally only just passed being 3 years old.
If you can provide any more help that would be appreciated, thank you!

Imac with no os need help reinstalling os x ?

my hard drive has been formated but when i try 2 install os x disc 1 it say can't install or goes 2 blue screen whit a wheel spining i've left it spin 4 about 2 hours and nothing happens can any 1 help??

Formatted how?
Did you choose HFS+ (or extended) with Journaling enabled?

HT201263 After updating to the ios6 my ipod was going on and off displaying the apple icon and then had a white screen that had multi colors on it. Then it had a blue screen.plz help me

I was updating my iPod touch 4g to the ios6 and it told me to hook it up to the iTunes and so I did. After doing that the computer told me to restore I tried and it didn't work. My ipod then was Turing on and off displaying the apple icon then my screen turned white with rainbow colors going down the screen then at some point my ipod had a multi colored blue screen. The screen was no longer blue after I let it die. Plz help I can't find any solutions.

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

White screen, new hard drive, blue screen. Help!

Tried to boot my MacBook Pro (2011) and just had blank white screen. Tried to boot from Mountain Lion bootable flash drive and just get a blue screen.
Installed new hard drive. Same thing. Suggestions?

After the dealer looked it over, he determined it has a bad logic board. However, searching online, I see the cause of all these 2011 MBP failures is due to the Raedon graphics card in them. Apple was replacing free for iMacs with the same part, but so far isn't doing the same for MacBook Pro's. I have emailed Apple, intend to call them, and posted on their support forum as well as other ones. FRUSTRATING.

Imac g4 blue screen need help!!

Similar Messages

Maybe you are looking for