Imac G4-Keyboard

I have a G4 that I got super cheap and am planning on upgrading the user ram slot, as well as an airport card. I am going to buy one of those "bluetooth " USB ports. I am wondering will any of the Apple bluetooth keyboard and Mice be able to connect? I am going to be running Tiger (10.4 I think?)
thanks!!

Hello and Welcome to Apple Discussions. 
Good news on the purchase - a lovely iMac to use.
A very few of these iMac G4s had internal Bluetooth: have you checked? (It's not worth attempting the internal BT upgrade - the parts are {conservatively} 5x the cost of a USB BT dongle and it's a very difficult task to undertake).
Just about any Bluetooth USB Dongle should work fine. Will you have a USB Keyboard and Mouse for set-up purposes though?
Personally I don't get on with Apple mice and if you're buying now Apple KB and mice are relatively pricey. I've also found BT a little slow to respond after leaving the computer sleeping a while. I currently have a couple of these:
The black/grey version matches the Alu iMac much better than the Apple mouse too They come with their own wireless dongle and are as responsive as a USB mouse.
As you will take up a USB port with the BT dongle why not just use a wired keyboard? The Alu Apple wired keyboard has a USB2.0 hub and numeric keypad unlike the more expensive BT version.
Just my thoughts...
cheers
mrtotes

Similar Messages

  • Can I buy an imac without keyboard and mouse ?

    Can I buy an imac without keyboard and mouse from an apple store ?

    Call or email your Apple store and ask.  But I doubt that you can do what you want.  You might try a resller.

  • Can I use an iMac Bluetooth Keyboard with an iPad1 or iPad2?

    Can I use an iMac Bluetooth Keyboard with an iPad1 or iPad2?
    Do I need a keyboard that state's it is for ipad?  Or can I use the Apple iMac Bluetooth keyboard for my ipad?
    I don't see anywhere on the Apple iMac keybaord box that states it is compatible.
    I find the 3rd party ipad keyboards to be flimsy in construction.
    Thanks
    AS

    See:
    iOS: Apple Wireless Keyboard compatibility

  • How to change the battery in the imac wireless keyboard

    how to change the battery in the imac wireless keyboard?

    FYI, there is no "iMac" wireless keyboard. 
    If you have an Apple Bluetooth KB, simply remove the plug (screws out) on the left top side of the KB.
    Barry

  • What's with the imac wireless keyboard?? New batteries won't work!

    What's with the imac wireless keyboard?? New batteries won't work!

    I figured it out. It wasn't easy. I took the keyboard battery tube apart. Photos are posted here:
    http://flickr.com/photos/martingreen/sets/72157611216768360

  • HI, I AM looking for iMac wireless keyboard screw or cover

    Hi, where can I find an Imac wireless keyboard screw for batteries

    Hi pmspares:
               I hope you still have the part number because you can call the store 1-800-227-8164 M.-F. 7:00 a.m. to 7:00 p.m. CST and order this way. I also found this ordering page as well. http://h20141.www.2.hpparts/default.aspx?mscssid=AEC685FE9D1149C7BCECFAB752    P/N:  511400-ZH1 S/N: {Removed for privacy}  P/N: 0K03-00660H2  These numbers are for orginal keyboard and mouse set for HP Touchsmart 600-1050. This was ship to me from HP Direct Support about five months a go. The complete set for my replacement of faulty keyboard. Some time an on line operator will drop down and will ask you for if need assistant as well.
             There is troubles with Internet Explorer 9 using it on HP websites you can surff with it just but trying to connect to anything such as you tried to place an order. I use Mozilla Firefox Explorer  to connect to HP website. Try this page and see what happens and you have the phone number as well.

  • I cant use the X key on my imac wired keyboard, the key viewer shows the two commands keys pressed when i hit x and the caps lock light is always on....thank you

    I cant use the X key on my imac wired keyboard, the key viewer shows the two commands keys pressed when i hit x and the caps lock light is always on....not really sure what happened, but i didnt do anything different from my daily stuff
    just an update....when i hit the right command key it respond normal (cmd v cmd c...etc) but when i hit the left command key it shows the x and two commands pressed as well as it delete what i'm working on i.e like backspace but takes out everything at once
    thank you

    Hi Moe,
    Sounds mostly likje a bad KB, do you have another to test with?
    Or...
    One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
    Reboot, test again.
    If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed.
    Check the System Preferences>Other Row, for 3rd party Pref Panes.
    Also look in these if they exist, some are invisible...
    /private/var/run/StartupItems
    /Library/StartupItems
    /System/Library/StartupItems
    /System/Library/LaunchDaemons
    /Library/LaunchDaemons

  • New (iMac) Apple keyboard - don't hurry to replace it

    I've been a fan of "clicky" keyboards since my first computer, an IBM PS/2 from a long time ago in a galaxy far away. When Matias sold the first "Tactile Pro" keyboard ( http://matias.ca/tactilepro/index.php ), I quickly purchased one for my old iMac; I still use it to this day and love it. So Matias rolled out Version 2.0 ( http://matias.ca/tactilepro2/index.php ) - in colors matching the new iMac, no less - I ordered one the same day I ordered my new iMac.
    After using the included new Apple keyboard for a week, I finally received my new Tactile Pro. And I must say, I'm disappointed.
    The not-so-obvious problem is the advertised USB 2.0 "hub" which isn't really a hub at all. Matias cheated: the keyboard has two USB cables, the second of which just relocates an existing port from the iMac to the keyboard. Worse, this one (one?!?) port is on the right-side of the keyboard and facing right, where it is typically blocked by mouse placement and thus unusable. What a waste of scarce USB ports.
    The above would be less of a problem if the second cable were removable, which it is not, leaving its connector dangling uncleanly off the back of the computer. And that cable is one of two ways in which version 2.0 of this keyboard falls short of version 1.0. The cable is too stiff, too short, and too inconveniently placed. Out of the left side only? Not redirectable like on 1.0 or most any other keyboard? And coming out of the keyboard sideways, instead of forwards? Ugh.
    But the greatest shortfall of the new Tactile Pro versus its predecessor is the quality of its keys. Matias has clearly cut some corners on the key-switches: they are much softer and thus provide less tactile feedback. Even worse, the keycaps are rather loosely attached to the switches.
    I'm not asking for a refund, as this keyboard is marginally better in its tactile feedback and styling than Apple's new aluminum keyboard. However, the Apple keyboard costs $100 less, uses a more convenient cable (cable_, singular, not cables, plural), and provides 2 USB 2.0 ports, one out each side. I was also planning to replace the Tactile Pro 1.0 on my old iMac with the 2.0 - not any more.
    (Alternatively, try to find the original Tactile Pro on close-out or places like eBay.)
    That's my opinion & experience - YMMV.

    Probably not - but that certainly does not involve iPhoto for the Mac - you need to look at Crashplan support for you options 
    And iCloud is not a place to store photos so that is certainly not a possibility
    If you restore your masters folder out of the iPhoto library you will have all of your original photos to do with what you please
    LN

  • Imac g4 keyboard on new imac 24"?

    Can I use the wired keyboard from my imac 17 g4 on the new imac 24" alum? I love the feel of the old keyboard and was wondering if I could just plug it in? Both are usb and should work....??
    Thanks in advance
    Rich

    Hello Rich,
    Yep. It will work. I too loved that M7803 Keyboard. I have had to persevere with the new one - to learn to type again
    Regards
    Ian

  • IMac display/keyboard do not function properly

    Took my 21.5" iMac to get the HDD replaced (as per email received from Apple). Computer started up fine, paired mouse and keyboard with no issues. When I try to put the computer to sleep it sounds like it goes to sleep but the display stays on. Also the functions keys above the numbered keys do not work for their intended purposes either. Has anyone had any issues with either one of these problems?

    Less than a teaspoon, you can take a chance replacing the keyboard at your own cost (warranty/AppleCare is void)
    More than a teaspoon, then it's done for or will continue to have issues.
    Dissect it, take out the hard drive and use a SATA to USB adpater to a new Mac (Migration Assistant) or install MacDrive in a Windows machine and grab your files that way.
    Sell it for parts online.

  • Will iMac bluetooth keyboard work with apple tv?

    iMac is 4 months old before fusion drive came out
    thx

    I forgot to mention I use a logitech s530 laser keyboard for my iMac; have never used the standard apple keyboard
    can I just use the Apple keyboard with my Apple TV exclusively?
    thanks!

  • Imac Wireless Keyboard Cleaning

    Hi guys,
    Could I use those L-Type Key Wrench to open from the back of the wireless keyboard? Could that be an easier way to clean it rather than having to extract key by key as some people suggested in the forum?
    Thanks for any help
    Sebastiao

    Either get better grade rechargable batteries with charger or just
    DItch the Apple wireless keyboard and get their wired version instead.
    OR, look at Mac specific keyboards from, Logitech, Microsoft, Kensington, Macally or Matias.
    The plus with the wired keyboard is the you get two extra USB 2 ports.
    Also, if your Wireless Magic Mouse is eating batteries, same strategy, use better rechargable lithium batteries and charger or try Apple's wireless track pad ( reports indicate that it is better on batteries than the Magic Mouse) or look and better wireless mouse offerings from Microsoft, Logitech, Kensington or Macally.
    Apple's wireless device really, REALLY suck on battery life. They look and work great, but they are poor performers with batteries and battery life.. I wish Apple would get rid of their older style wired mouse and make a wired version of the Magic Mouse.
    Funny thing, we keep getting posts like this, but when you initially order an iMac from Apple's online store, you get the options of ordering a new iMac with a wired keyboard and wired mouse instead of the wireless setup.
    Everyone seems to miss this when ordering online.

  • First time starting up iMac, USB keyboard not recognised

    i have tried to set-up my imac, however the keyboard is not recognised and says that i have to turn on my bluetooth keyboard when i have  a USB keyboard and it will not go on to the next step.

    Hi manocchio1994,
    Thanks for contacting the Apple Support Communities. I understand your keyboard is not recognized when connecting if for the first time and I know how frustrating that can be. There is a fantastic article available for USB keyboard troubleshooting I would recommend.
    None of the keys on my keyboard work
    http://support.apple.com/kb/TS1996
    Troubleshooting your Apple USB Keyboard Step-by-Step
    If your keyboard keys still aren't working after trying the steps in USB Basic Troubleshooting, try these steps, in order, until you've come to a resolution.
    ▪ Unplug all devices from your computer, including your mouse and keyboard, as well as your printer, scanner, cameras, iPod, external hard drives, and hubs. (Warning: Some devices, like iPods, may require you to perform steps before it is safe to unplug them.) If you have a hub, don't forget to unplug it as well.
    ▪ Plug your keyboard and mouse back into your computer firmly and securely. Take special care to make sure that the connector is completely in the port. (USB plugs fit into ports one way only, and won't plug in if you try to plug them in upside-down.)
    ▪ If that still doesn't work, try plugging your keyboard in to the other USB ports. Be sure to try them all. Check to see if the keyboard's Caps Lock light turns on when you press it, and try typing in one of your applications, such as TextEdit.
    ▪ If your keyboard works in one of your USB ports but not all, your computer may need service to resolve an issue with its USB port or ports.
      If your keyboard doesn't work in any of your computer's USB ports, it appears that your keyboard isn't functioning properly and needs to be replaced. You can order this part online. Order a replacement keyboard.
    If needed, I suggest resetting the System Management Controller as well. Those steps can be found in the following section of this article.
    Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/ht3964
    Thanks for reaching out,
    -Joe

  • Mapping buttons from imac Bluetooth Keyboard to Macpro

    I tried a friend's new mini bluetooth keyboard (one that sells with new imac) on my Macpro, and some of the buttons do not seem to map correctly. Example: volume was effecting expose. Is it just not meant to be used with anything other than an imac, or can the buttons be properly mapped?
    Thanks.

    You need to install the keyboard software
    <http://www.apple.com/support/downloads/keyboardsoftwareupdate12.html>
    Also see
    <http://docs.info.apple.com/article.html?artnum=306169>

  • IMac Aluminum keyboard numbers not working.. Works in windows vista though

    Hey Everyone,
    I have an iMac running the last version of Leopard (10.5.6) and for some reason the 0-9 keys on the keyboard don't show up as numbers. I'm talking about the number pad on the right hand side of the keyboard, the ones in front of the qwerty keys work fine.. Whenever I press a number in Leopard on the number pad it does weird things like highlights the box, brings up sub menus and other stuff like that.
    I have Bootcamp on this computer and when I boot into Vista the number keys work fine so I know it's nothing wrong with the keyboard. It some preference. Could anyone help me please?
    Thanks,
    -Mike

    Thanks again! I went through the system preferences and sticky keys was already off. I own an iMac Aluminum and it looks like that article only was for MacBook and MacBook Pro computers. I also tired resetting the PRAM. If I only backed up I could just restore from that. My current NAS Drive (Western Digital MyBook World) just died so I purchased a time capsule as a replacement so I should be able to back up now and avoid problems like this..
    It's just some setting in Leopard somewhere but I just can't figure out where...

Maybe you are looking for

  • Sales values in R/3

    I want to compare the sales values like Incoming order value.Returns value,Billing value,No. of order items,No. of return items,Returns qty,Billed Qty values of BW with R/3 in which tables or t-codes can I check these

  • What is the path in the filesystem for the deployed Wendynpro application .

    What is the path in the filesystem for the deployed Wendynpro application in the WAB AS We have a different version of webdynpro application running in production and non production , what is the process for overwriting the deployed application from

  • To put a new page when month changes in sap script

    hello experts, how to put a page break whenever the month changes from the date range given ... e,g : 12.03.2007 to 12.09.2007 ... here i want to put the page break betwwen the records of month 03 .. 04..05..06... 09...

  • Output of Smart Forms in Hindi

    Hi Sapgurus, I have to show the output of smartforms in Hindi but have no idea how i can do it ,plz help. Thanks and regarads, Rachit Khanna

  • Problem with icons not showing up using stacks.

    In my dock, I have a folder that contains movies and when I click it, it opens using the 'fan' effect in Stacks. The movies are .avi. My only problem is certain icons do not appear. They remain a simple QuickTime Logo on a white looking film strip. B