Imac G4 not connecting to internet through airport?

I have installed airport on my G4 in the airport utility it shows a connection and the light on the AEXBS I have finally gotten to be green after struggling through blinking amber. When I go into sys. pref. >network>show Airport isn't listed?
What can I do to fix this problem? I'm assuming if it's not listed that is a big problem.
I have my base station connected to my modem via WAN port, base station also connected to IMAC via ethernet port.
Been spending all day on this and just getting nowhere? Any suggestions?

Make sure your G4 is compatible with AEBS I'm beginning to realize I may need an old airport card to resolve the problem.
The amber light issue was resolved by going here
http://www.apple.com/support/airport/

Similar Messages

  • Not connected to internet through airport xtreme (connection is ok) after upgrading iOS6

    after upgrading to iOS6 none of my mobile devices (running iOS6) can go online on internet through my airport extreme. My MAC is using the same without problem.

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130?tstart=60
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • My iMac does not connect to internet via wireless after I log in. I have to open network preferences and run the assistant everytime to make it work. Its a new system, updated to Mountain Lion,.

    My iMac does not connect to internet via wireless after I log in. I have to open network preferences and run the assistant everytime to make it work. Its a new system, updated to Mountain Lion,.

    Hi, this has worked for a few...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.7…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    Click OK.
    Also, turn off IPv6:
    System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6
    Or whatever Interface you use.

  • Can't connect to internet through Airport Express anymore

    Suddenly, my PowerBook can't connect to the internet through Airport Express. Monday late afternoon--everything was fine. Put it in sleep, come back a few hours later, can't connect.
    Thing is, Airport/wireless is working. Can stream audio to my home stereo.
    And the DSL/modem are working. If I connect the machine via ethernet directly, I'm online.
    Saw that some other users began having problems with USB/printer connections Monday. Could my problem be related?
    What gives?
    Any ideas?

    Hello mnkyby. Welcome to the Apple Discussions!
    It sounds like your AirPort Express Base Station (AX) in not getting a proper IP address from your modem.
    Try this ...
    o Connect to the AX's wireless network, and then, run the AirPort Admin Utility.
    o Go to the Internet tab.
    o Note the value for IP address. (Note: Do not list it here on the forum, just note what it is.)
    o Is the IP address what you would expect from your ISP or is it something like: 196.254.x.x?
    If the latter, try the following ...
    Modem/Router Power Recycling - Quick
    o Power-off the DSL/Cable modem, AX, & computer(s); Wait at least 5 minutes.
    o Power-on the DSL/Cable modem; Wait at least 5 minutes.
    o Power-on the AX; Wait at least 5 minutes.
    o Power-on the computer(s)
    If this fails to get the modem to "recognize" the Internet router, then try the "Full" version.
    Modem/Router Power ReCycling - Full
    o Power-off the DSL/Cable modem, AX, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
    o Power-on the DSL/Cable modem; Wait at least 15 minutes.
    o Power-on the AX; Wait at least 5 minutes.
    o Power-on the computer(s)

  • G4 iMac will not connect to internet

    Hey all.
    Got in a G4 iMac 17'' 1GHz. It will not connect to the internet thru ethernet. It works fine through AirPort though. I've tried everything I can think of. Reinstall the OS, create a fresh user account. Nothing works. I'm guessing there is something wrong with the ethernet connector on the logic board. The computer was dirty and had a lot of water marks on it like it had been sitting next to an aquarium so my guess is water might have gotten in the bottom.
    Think I'm right? Or is there something else I can try?
    Thanks in advance.
    Thomas

    I've never had to use it, but the OS X CD/DVD that came with the system provides a set of diag tools. You boot from the disc, and run these tools to check hardware on the machine.
    I am sorry I don't have any further clue on that specific tool set or how to use as I never have. I simply know it exists.
    Quite sure a bit of searching on the forums here will reveal the boot-disc options, etc. Heck... you may find info on the disc itself, try inserting it, opening and see what is what.
    Beavis2084

  • Lost connection to internet through airport

    My Mac at home is configured to a timecapsule and connected through airport wifi. The Time capsule is connected via cable to modem and out via cable to Internet. Up until today everything is fine. started up and i have lost connection to the internet.
    Network Preferences is showing that Airport has a self asssigned IP address and cannot connect to internet. The time capsule lights are showing green, as do the Modem, neither are reporting problems.
    I have tried all of the "first Aid configurations" i.e. switch off/on etc, also tried a couple of ideas from forums, nothing works. I can connect the Mac directly to the modem via cable and access the internet.
    As an aside, My iphone has also lost connectivity through home wifi.
    It would appear from other forums that this is a growing problem, however not much in the way of resolution. Any Ideas????

    System Preferences/Internet & Network/Network
    Unlock the padlock
    Locations: Automatic
    Highlight Airport
    Click the Assist Me button
    In the pop up window click the Diagnostic button.
    System Preferences/Network- Unlock padlock. Highlight Airport. Network Name-select your name. Click on the Advanced button. Airport/Preferred Networks-delete all that is not your network.
    Place a check mark next to "Remember networks this computer has joined." Click the OK button and lock the padlock. Restart your computer.
    Mac OS: How to release and renew a DHCP lease
    *No internet connection (wireless)*
    Check to see if an extra entry is present in the DNS Tab for your wireless connection (System Preferences/Network/Airport/Advanced/DNS).
    Delete all extra entries that you find.
    Place a check mark next to "Remember networks this computer has joined."

  • Can't connect to internet through airport extreme but have full signal

    I've seen a lot of posts but I still can't connect wirelessly via airport extreme.
    Using a Powerbook running 10.6.4, I have updated the airport extreme's firmware and have a full signal strength, but I can't connect to the internet.
    I get an error message that it can't find the server.
    I can get online if I connect the internet cable directly to my computer.
    so..
    Airport is working
    Internet is working
    Wireless is not working
    suggestions?

    Robin Berman wrote:
    I still can't connect wirelessly via airport extreme.
    Using a Powerbook running 10.6.4
    That's not possible. Do you mean "MacBook"?
    I ... have a full signal strength, but I can't connect to the internet.
    First try resetting your connection settings using the steps listed in this message:
    http://discussions.apple.com/thread.jspa?messageID=10695921&start=1
    They're not guaranteed to solve the problem, but they'll only take a minute or so to try.
    If that doesn't help, connect to your wireless network, then open the Network panel of System Preferences. Select the AirPort connection item, click on the "Advanced" button, then on the "TCP/IP" tab. What do you see for the three values below "Configure IPv4"? Now click on the "DNS" tab. What do you see for "DNS Servers"?
    Finally, type this URL in the address bar of your browser:
    http://74.125.157.99/
    and press "return". Does that take you to Google? If so, there's something wrong with the way your computer or router is handling DNS lookups.

  • My Mac Mini is not connecting to internet through the ethernet

    Had an issue with my internet provider, which was resolved after a month.....at this point my internet is not connecting through the ethernet cable (no router is being used, from modem directly to mini mac).....ERROR:YOU ARE NOT CONNECTED TO THE INTERNET
    When checking on the Network Preferences it shows the ethernet connected but it does not show the Router IP nor the DNS Server.
    If i run diagnostics ...ethernet is green, network settings is yellow and the the rest is red (how do i fix this network settings)
    If i try to run the NETWORK SETUP ASSISTANT and tried using
    IP 192.168.1.33
    Subnet mask 255.255.255.0
    Router 192.168.1.1 (even though i don't use a router, but this was the last set up i saw working)
    DN S Server 192.168.1.1
    It takes for ever as configuring but does not do anything
    Please advise what am i doing wrong or missing here......
    I've read people selling their equipment, taking it back, using their warranty.....i don't think it is something the serious but still i'm not going anywhere with my troubleshooting
    HELP!!!!

    Deleted the previous ethernet and added a new one (System Preferences/Network).....did not work
    At this point in diagnostics it show Ethernet and ISP in green, Network Settings in yellow leaving Internet and Server in red.
    It's a bit frustrating because it did work fine until a week a go and since then have tried several things and....nothing
    Not interested in buying a router because of this issue......any other work around?
    Message was edited by: AbelArmando
    Message was edited by: AbelArmando

  • Mac will not connect to Internet through nighthawk router

    my new iMac shows I'm connected to Internet but I can not connect. All other devices do.

    Your choice of course but then you have all the various of using MS Windows, viruses, maintenance, etc.
    You may find this article useful to help you troubleshoot your networking issues. http://osxdaily.com/2014/10/25/fix-wi-fi-problems-os-x-yosemite/

  • Mac connected but PC can't connect to internet through Airport Extreme

    When I was using a dial-up connection everything worked fine on both computers but since I changed to a PPPoE / Ethernet connection my PC using Windows XP can't connect to the internet although is connected to the Airport with excellent signal.
    In System Preferences>Network I have Connect using PPPoE option checked so I can't see my airport in the Airport Admin Utility. Apple Talk is Inactive.
    In System Preferences>Sharing>Internet: Internet sharing is Off and there's a text that it can't be turned on "because there are no ports available over which to share your connection"

    I understand, but for some reason, that I'm trying to
    figure out, when I uncheck the PPPoE option on my
    computer and my base station appears in the Admin
    utility, I loose my internet connection on the
    macintosh although the Network Status says that I'm
    connected to the internet via Airport...
    You will need to configure the Airport to connect via PPPoE.
    iFelix

  • Airport Extreme bs not connecting to internet through ethernet network

    I live in a dormitory at a school. I have a network jack in the wall of my apartment that connects me to the rest of the school network and the internet. I have an Apple airport music thing that plugs into the wall socket and delivers wireless network and internet access to my apartment.
    I also have a new airport extreme base station that I set up by using the wizard set-up software. My computer sees the base station. The network connection software says I have a strong network connection. But I can't access any service either on the local network or the internet.
    Any thoughts about what I should change in the base station set-up to make it talk to the rest of the world?

    I fixed it myself.
    It was not a computer related problem. We have a network registration procedure that I forgot to do before the internet works.

  • Can't connect to internet through Airport network

    Previously - worked
    Internet: DSL
    Network: via Airport Extreme
    Computers: 3 (G4 Tower, PowerBook G4, Xbox360)
    Setup: I ran the ethernet cable out of the modem into the Aiport Extreme. Then I ran another ethernet cable into a router which then split the signal into two lines -- one going to the tower and one going to the Xbox. The laptop connected wirelessly. This worked using DHCP assigning multiple IP addresses to all on the network and indeed the two computers surfed the net with ease and I had no problems connecting or staying on Xbox Live.
    Currently - doesn't work
    Internet: Cable (Charter)
    Network: same
    Computers: same
    Problem: I recently switched from DSL to Cable internet for faster speed. Here is what i found: When i connect the ethernet cable directly into the tower from the modem i can access the internet. If i connect the ethernet cable directly into the PowerBook G4 i get nothing. If i try to connect the ethernet cable to the Airport from the modem i get nothing as well. At first all i thought i had to do was change the account settings from that of the DSL to that of the Cable internet -- only there are no account settings for the Cable internet. I literally just plugged in the cable and was ready to go. I have tried resetting my airport to get rid of my previous [DSL] settings and redoing the Airport Setup Assistant to no avail.
    G4 Tower, PowerBook G4   Mac OS X (10.3.9)  

    ok so i unplugged my modem for a few minutes and then plugged the ethernet into the airport and turned the modem back on. now i can get internet on both my laptop and my tower. that works, thanks!
    an odd aside tho is that before, when i was connecting through PPPoE, the laptop would automatically connect to my network (regardless of how many networks the airport card was picking up). now that i have the airport set to just connect via ethernet i have to manually log onto my network every time. is there a setting i'm forgetting about that enables automatic log in or is this just the case with connecting via ethernet?
    here is the next problem, though. i bought a wireless adapter for my 360 and it cannot detect my network. it detects two other different networks that are in my complex but not mine. i have no idea if this is an airport issue or a 360 issue as powerbooks just automatically detect an airport base station. i have tried testing it in the same room as the airport with no luck. the only way i have connected to Xbox Live so far was to hard line an ethernet cable to the 360, shut the modem off, turn it back on and connect that way. if anyone knows anything about the 360 or has had similar problems trying to get their 360 up and running wirelessly through an airport please let me know
    Mac OS X (10.3.9)
    Mac OS X (10.3.9)

  • Cannot connect to internet through AirPort in Costa Rica - HELP!

    Hello,
    I have been traveling Costa Rica for the past few days, and have had no problem connecting to WIFI across the country, but, tonight, I am not able to connect. I clicked on my AirPort icon > Open Network Preferences. The Status reads "On", BUT under the status is a message that says:
    "AirPort has the self-assigned IP address 169... and will not be able to connect to the internet."
    Reading through the posts here, I have tried several fixes...
    - Renew DHCP Lease
    - Repair permissions
    ...And still no luck.
    I have no access to the router itself, because I am staying at a bed and breakfast. Anyone have any other ideas?
    I really appreciate your help in advance. I love this community!
    Sincerely,
    Nathan

    Hey,
    This is obviously seems to be a DHCP problem, do you have any other wireless devices with you like an iPhone, iPad or just any wireless capable device ? If yes, try to connect through it and see if it will obtain a valid IP address successfully, if it didn't, then surely it's a router issue that it isn't able to distribute IP addresses, if you don't have a second device, can you see any ethernet connections in the wall ? another solution is to contact the IT person at your location and ask him if you should configure your network settings manually and if so, what would be the settings. Sometimes something as simple as restarting the router fixes similar issues

  • Problems connecting to internet through airport extreme

    Hi everyone I am tyring to connect to the internet. I have Charter Digital at the highest speed. When I connect directly through the cable modem using DHCP i can connect to the internet just fine, but when I use the Airport using assing multiple IP addresses i cannot get the internet. When I run diagonostics, Everything works fine up to ISP after that (internet, Server) cannot connect. I've read through the boards and found nothing, so I could really use some help. I have the CAT 5 cable from the modem going to the WAN plug in the Airport.
    Thanks for any help you can give

    Thank you - some of the materials linked to that may have helped isolate my problem. Unfortunately, nothing's solved it yet. Pinging the Apple IP address gives me: No route to Host, with 100% packet loss on all attempts. I'm using an Airport Express card in a 1GHz G4 eMac running OSX 10.3.9, trying to connect to a Linksys BEFCMUH4 wireless broadband gateway modem/router. As stated above, all 4 ethernet ports are functioning correctly. All initial diagnostics on my end show there's a connection. Further diagnostics and attempts to get online show a lack of a connection but don't give any detail as to where it's encountering difficulty (or, if a traceroute shows something I'm not qualified to decipher it). It's even told me it's unable to configure succesfully. I've made sure the router itself is configured so there is no password necessary (it checks for an automatically logged number from my computer) and it shouldn't be locking me out from there (I hope). I was told running Airport Express with a non-Airport wireless router would be fine, but is it possible I was misinformed? The setup procedures available to help facilitate this all assume there's an Apple AirPort to search for and don't turn up my current router when they scan, leaving me with nothing to select from in that stage of the setup, and thus I cannot proceed. Am I doomed? Are there any gracious, exceedingly capable souls out there with the time and expertise to assist me? I'll be very grateful if someone can get me past this hurdle (I need to go wireless so I can get my air conditioner installed).

  • IMac G5 not connecting to wireless network (Airport Express)

    Hello. I recently made a shift to working-from-home and I have my iMac G5 to replace an older iBook. My internet connection repeatedly gets cut off during the course of the day. I actually called my ISP and ask them to run some tests and they told me all is fine from their end. I have 2 iBooks who can access our network without any glitches. It just happens to be my iMac who is suffering from this pesky little problem. The admin computer is actually my husband's iBook G4, which he leaves in his home office. I already made updates and ensured that software is current. Please, help!
    THANKS,
    funkymum of 'shwa

    If his Mac is set up for Internet Sharing, then it might be possible that every time it goes into "sleep" mode is when you are losing the Internet connection.
    I suggest that you double-check the settings on his Mac for Internet Sharing.
    To setup for Internet Sharing (Wired to Wireless):
    Enable Software Firewall
    System Preferences > Sharing > Firewall
    - Click Stop to start the software firewall
    Setup the Network
    Cable Modem > (Ethernet cable) > [Ethernet port] Mac_#1 > (wireless) > Mac_#2
    Setup Port Order
    System Preferences > Network > Show > Network Port Configurations
    - Verify that "AirPort" and "Built-In Ethernet" are enabled.
    - Verify that "Built-In Ethernet" is at the top of the list, followed by "AirPort".
    - Click "Apply Now."
    Configure the Internet Connection
    System Preferences > Network > Show > Built-In Ethernet > TCP/IP
    - Configure IPv4: Using DHCP
    - Configure IPv6: Automatically or Off
    Enable Internet Sharing
    System Preferences > Sharing > Internet
    - Share your connection from: Built-in Ethernet
    - To computers using: AirPort (checked) (Note: Uncheck all other entries in the list.)
    - AirPort Options
    -- Network Name: <anything you want>
    -- Channel: Automatic
    -- Enable encryption (using WEP) (optional)
    -- Password: (optional)
    -- Confirm Password: (optional)
    -- WEP Key Length: (optional)
    -- Click OK
    - Click Start

Maybe you are looking for