Imac g4 processor upgrade

I just bought an Imac g4 and I would just like to know if it's possible to upgrade the processor? basic specs:40gb,256megs,700mhz,15" screen.

Hi Macis4me,
Here is a link to an iMac G4 upgrade:
http://daystartechnology.com/AppleMac_Products/XLR8_Macintosh_Products/Mac_CPU_G4_Upgrade_iMac_FPPS.html
As you can see, it's quite involved, and requires you to send your iMac to Daystar.
Cheers!
Karl

Similar Messages

IMac G5 processor upgrade

I have an older iMac G5. Intel Processor required on my machine in order to install Adobe CS5. Can I upgrade the processor from the PowerPC to Intel?

No.

Processor Upgrade for iMac G3

Hello, I didn't see any particular posts specifically pertaining to the slot loading iMac (Graphite)..I hope someone can help me out.
I have a G3 Graphite iMac, upgraded RAM currently running Tiger. I used to use it but wiped it clean, re-installied the OS and created a separate account for my 8y/o son, so essentially there aren't many apps on there. For some reason it's running slower than it should, even with just Safari open. Is there a fix or possibly a processor upgrade for this model (I keep seeing that there isn't, but I want to be sure).
It's either that or constantly hearing my son complain of the lagtime and ask for our laptops instead...

According to Mactracker at one point there was a 700 MHz model available in Graphite & Snow. If you could find a 700 MHz G3 CRT iMac logic board on eBay it might be possible to upgrade the processor speed. You could also install a Matshita SR-8184 or SR-8186 DVD-ROM drive.
There's firmware available for both drives that allow them to be flashed to RPC1 or region free meaning they can play DVDs from any region in the world. Normally the drive is restricted to being able to only play Region 3 DVDs from the US. If you order a Matshita SR-8184CD optical drive from www.welovemacs.com call their 800 number listed on their website & be sure to ask for Jessica or Faith since some of the optical drives they sell don't have RPC1 firmware available for them.

Can an iMac G4 be upgraded to an Intel processor?

I was wondering can an iMac G4 be upgraded to an Intel processor? This stems from the whole PPC no longer being supported by Adobe Flash etc.

No.
Kappy: That's replacing the computer, not upgrading it.
(70887)

I have a mid 2010 iMac with an upgraded i5 processor, however mirroring still doesn't work. What's the deal?

I have a mid 2010 iMac with an upgraded i5 processor, however mirroring still doesn't work. What's the deal?

You did not look at Mountain Lion's Tech Spec's, click www.apple.com/osx and click the Tech Specs tab. That information has been posted for months.

New Sonnet Encore /MDX G4 processor upgrade?

I looking at New Sonnet Encore /MDX G4 processor upgrade.
http://www.sonnettech.com/product/encoremdxduet.html
Do you think that would make my Power Mac G4 MDD (if I got Dual PowerPC G4 7447A CPUs running at 1.8 GHz) about as fast as my iMac G5 1.8 or my MacBook 1.83 ?

My Dual 1.25 is just as fast as the iMac G5 1.8 it replaced.
Your MacBook beats all of these machines, it is a Dual-Core processor, and it's a newer chip that beats any PPC except the Dual G5's.

Processor upgrades

i have had a single 1ghz mdd firewire 800 for about a year. i had great plans for this machine but it is basically a print server for my g4 imac in the living room. recently i purchased a 400 mhz sawtooth to replace the mdd. Is downgrading from a mdd a good idea? i plan on selling one of the powermacs. if i decide to upgrade again which is easier/cheaper to upgrade? there are a lot more processor upgrades for g4 models earlier than the mdd and i am not sure why. i purchased the mdd for around $400. i purchased the sawtooth for $10.

eighth-1der wrote:
My LW 16/600 will work with the Wintels if hooked via parallel or via ethernet reversed pair cable (single cable with one reversed pair). But if I hook the LW to a hub or to the router the only units that can see it are the Macs. I just turn on sharing on the Mac and make a printer profile in the Windoze control panel that routes to my mac (\\xxx.xxx.x.xxx\<mac name>\<OSX printer profile>). I imagine it has something to do with the protocols back in 1995 when the HP4 was being made as a LW.
But if you say that your HP5 will show up when hooked to a hub but not a router I may try that, isolate the Wintels and the LW on the hub and then hook the hub to the router. Is that essentially what you are describing? A reversed pair cable is a two unit closed loop hub, so the same effect as I described before will apply, right? But current setting of letting OSX discover the LW and letting the Wintels use the Mac to print is no real drag, just a few watts of power for an otherwise unused computer.
My HP LJ5MP worked with the PhoneNet/EtherMac connection to its AppleTalk port back when I just used the old 10BaseT hub for my LAN and internet connection (before modern router and switches). However, the new switch technology doesn't recognize the EtherMac output, which is the AppleTalk input. I found that when I put the hub in between the EtherMac and the new switch, the switch recognized the hub, which recognized the EtherMac and everything worked on my LAN. With this setup, both my Mac and my PC notebook on my LAN could see and use the HP LJ5MP.
Alternatively, I later bought a D-Link parallel port print server for the HP LJ. It works quite well on my LAN and is a little bit faster than the AppleTalk/EtherMac/hub setup. I currently have both connections to the HP LJ 5MP hooked to my LAN. I do it for redundancy, as the two different connections function independently of each other, so if there is a problem with one, the other usually works. This is important to me as the HP LJ is my primary printer for all my computers.
Carl B.

Imac G3 233MHz upgrade

I need advcie. I have imac G3 233MHz with 64MB running OS 9.2.2 and I want to upgrade it to panther, is it possible?

Hello Again! I would agree that the processor upgrade is possible but it cost about NEARLY 300 BUCKS and then adding Two 256 meg Ram Chips cost about another 66 bucks and then adding a bigger hard drive at 55 BUCKS adds up to about 421 bucks and then adding another 100 bucks or so for OSX brings the total to about 521 dollars and for About 599 you can get a new mini with Tiger. Of course this assumes you can scrape up an old monitor for the mini. Tom

IMAC 2010 I5 UPGRADE

Hi all!
Any one knows if its possible upgrade my imac 2010 i5 2.8 (in warranty) to upper across apple store?
Thanks!

Hello Sergio, not for the light hearted or people that need their AppleCare intact, but it has been done...
http://www.everymac.com/systems/apple/imac/imac-aluminum-faq/imac-intel-aluminum -processor-upgrade-instructions.html
http://forums.macrumors.com/showthread.php?t=1002423

I use an Epson Stylus Office BX320FW printer with my IMac. Since upgrading OSX, I have lost the ability to print and scan. I have downloaded printer drivers from both Epson and Apple. I am using the printer in wifi mode but can not get it print or scan

Hi Everybody,
I use an Epson Stylus Office BX320FW printer with my IMac. Since upgrading OSX, I have lost the ability to print and scan. I have downloaded printer drivers from both Epson and Apple. I am using the printer in wifi mode but can not get it print or scan. How do I uninstall the Epson software and start all over again?
nickel_man_65

Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
Someone on this forum suggested, that USB3 may interfere with the magic mouse.
I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
Thanks for the advice, Bee
Cheers, Gerd

If I have a 2009 iMac, can I upgrade to use it with Apple TV. It doesn't have Airplay capability. If possible, what should I buy?

If I have a 2009 iMac, can I upgrade to use it with Apple TV. It doesn't have Airplay capability. If possible, what should I buy?

You need a newer 2011 or later iMac to use Airplay.
Sorry.
For older Mac, look at an app called AirParrot
http://www.airsquirrels.com/airparrot/

SCSI card for a G5 or processor upgrade for a G4?

Hi all
Actually, this is a question that concerns the G5 and the G4 forum, but I decided to post it here first.
So, I have this old G4/400 PCI with an Adaptec 2930 SCSI card that I use for scanning slides with an Artix 4000t sclide scanner; this works fine, but the G4 is rather slow when it comes to using some features of the scanning software, such as removing scratches.
I've been thinking about buying a SCSI card for my G5 (Dual 1.8) for some time now, but I'm not sure what card I should go for; I'm not even sure if there are still cards for such an "old" device as the slide scanner (about 3 to 4 years old, no Ultrawide or something like that). And then there's the problem of the drivers for the card - how long will they be available, especially now that Apple is switching to Intel...?
The other possibility would be to buy a processor upgrade for the G4. I've seen some at OWC, and they seem to be less expensive than a SCSI card. The drawback of this solution is of course that I'll have to keep the G4 standing on my desk... on the other hand, I do know that the scanner will work perfectly with the G4.
The G5, on the other hand... it will be faster and easier, since I won't have to transfer the files for storage and editing, I could free some space on my desk,... but will it work? The G5 is running 10.4, I'm not sure if my current scanner driver is compatible... and what when 10.5 comes out...?
So I'm looking for a second, third, fourth... opinion:
What would you do? Get a SCSI card for the G5 or a processor upgrade for the G4? What SCSI card would you recommend?
TIA,
Tina

I've done some research on G5 and SCSI and scanners, and obviously, what I remembered was correct... making it work seems at least tricky, and maybe expensive too (if you've got to buy new scanning software and and..).
So I guess that's decided: No SCSI on the G5. Leaves the question, should I buy a processor upgrade card for the G4? Getting some dual G4 on eBay might be an option, but then, that would be another computer in my already crammed office, and I just can't throw the G4 away, it's one of the very first models...
I came by the idea of a processor upgrade because I just played around with an old Mac SE, which has an 68030 accelerator card installed, and this seems to work fine. Anyone has any experience with G3 /G4 upgrades (good or bad)?
Smokerz: Why would you not recommend an upgrade? Any bad experiences?
Tina

I am experiencing difficulties opening some web-based PDF files on my iPad. I was having the same difficulty opening the same PDFs on my iMac (after I upgrade to Yosemite) but was able to overcome it by adjusting the Adobe Reader plug-in settings.

I am experiencing difficulty opening some web-based PDF documents on my iPad. I had exactly the same difficulty on my iMac (after I upgraded to Yosemite) but was able to overcome it by adjusting the Adobe Reader plug-in security settings in Safari (in OSX).
Unfortunately there does not seem to be a way to similarity adjust the security settings in Safari in iOS 8.
The message I get when I attempt to open the PDF (on my iPad) is as follows:
            "To view the full contents of this document you need a later version of PDF viewer. You can upgrade to the latest version of Adobe Reader from ..."
Needless to say this is unhelpful for two reasons:
- I have the very latest version of Adobe Reader; and
- in iOS Adobe Reader is not a plug-in and plays absolutely no role in opening web-based PDF documents.
If anyone has experienced this difficulty and has been able to overcome it I would be most appreciative to hear of you solution.
Cheers
AlbertaRic

Did you check what I would consider the first place to look:
* http://kb.mozillazine.org/Problematic_extensions
If the site is still down (at least 12 hours) when you read this try [http://webcache.googleusercontent.com/search?q=cache:http%3A//kb.mozillazine.org/Problematic_extensions Google's cache]
Link or url would make it easier to see which page you tried rather than "your online solution for ...".
* http://kb.mozillazine.org/Firefox_hangs ([http://webcache.googleusercontent.com/search?q=cache:http%3A//kb.mozillazine.org/Firefox_hangs cached version])
* http://kb.mozillazine.org/Firefox_crashes ([http://webcache.googleusercontent.com/search?q=cache:http%3A//kb.mozillazine.org/Firefox_crashes cached version])
* [https://support.mozilla.com/kb/Firefox%20hangs#os=mac&browser=fx4 Firefox hangs | Troubleshooting | Firefox Help]

2 2.66 Ghz Dual-Core Intel Xeon processor upgrade

I have a question about my Mac Pro.I don't know if you can answer it or point me in the right direction. I have a 2006 Mac Pro 2+2.66Ghz. Dual-Core Intel Xeon with 8 GB 667 Mhz DDR2 FB-DIMM Ram.What types of upgrades can I do to make this a faster machine? Processor upgrade? or should I just by a new Mac Pro?

Selling the old one and buying a new one is the easiest way.
Macs tend to keep a much higher value then PC.
Allan

Processor upgrade is this possible

I have a broken 1.8ghz G5 which according to the apple repair centre has a faulty processor, (not happy only 18 months old and only used about once a week).
They are wanting £340+vat to fix this, but i can get hold of a second hand 2.0ghz processor for about £160 would this processor work with my mac? and is it easy to install, i work as a pc engineer so i'm ok with the taking pc's to bits.

There is some discussion of this subject which you can read if you enter say, "processor upgrade" (without the quotes) in the search box at top right of this forum
http://discussions.apple.com/search.jspa?objID=c108&search=Go&q=processor+upgrad e

Imac g4 processor upgrade

Similar Messages

Maybe you are looking for