IMac G4 Upgrade
Hello. Is it possible to upgrade an old iMac G4 to the level of modern computer? Now processor in the iMac G4 is very weak (1.25 GHz PowerPC G4).
Thank you!
As others have said, the answer is basically no. You can add RAM, but that won't get you any closer to current as far as application compatibility or running a more modern version of the OS.
Your best bet would be to look at a new machine. I know it's expensive, but you're getting a lot more than just a processor upgrade. Since the days of the G4 iMac, just about every component (or subsystem) inside the machine has seen some major improvements. Not just a faster CPU and more memory, but a MUCH faster graphics chip (even the least expensive iMac has a fast GPU), faster (and larger) hard drive, better display, and even improved I/O (stuff like USB ports). You also get the latest version of Mac OS and iLife, it's quite a bit of bang for your hard-earned buck.
To get an idea of how much faster a new machine might be overall, you can take a peek at the GeekBench (Mac Benchmark app) results. An 744MHz iMac G4 gets a score of 349, which wasn't bad back in the day. The lowest score of any of the 2011 iMacs is 7,185. Yes, that's 20 times faster.
Hope that info helps!
Similar Messages
-
On my iMac I upgraded from OSX 10.6 to OSX 10.6.8. Now Photoshop Elements 6 will not communicate with my scanner HP Photosmart 209a. I need an HP import module. How do I get one?
You may probably look for it on HP's site. - http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&product=3777182
Thanks
Andaleeb -
I can't set up iCloud drive on my iMac after upgrading to Yosemite
I can't set up iCloud drive on my iMac after upgrading to Yosemite - iPhone and iPad are updated but both say my iMac isn't (even though it is running Yosemite).
My iMac is OS X Yosemite 10.10 (14A389), memory is 4 GB 1333 MHz DDR3 and storage capacity is 273.64 free of 999.35 GB.
When i go to System Preferences and click on iCloud. The iCloud Drive section is greyed out and says setting up and a spinning pin wheel. It stays like this the whole time. I have tried restarting the computer. i amanita sure what else to do to make it work. Any suggestion would be great.I found another way to correct this...
1) Select Message, then go to Preferences,
2) a window will appear with 3 options, General, Accounts, Audio Video, don't be surprised when you see a video of yourself, your camera just turned on.
3) Select Accounts (you may have several here)
4) Select the account that has "iMessage" under the account name. This may likely be your Apple ID ****@me.com
5) Look at what is checked under the "You can be reached for messages at:"
6) Select the one account (or more if you like) and deselect the others
7) Close the window and the problem goes away.
I'm not longer getting my sons iMessages. -
How do I turn off messages on my iMac after upgrading to Yosemite?
How do I turn off messages on my iMac after upgrading to Yosemite?
Hi,
Open the Messages app.
Go to the Preferences item in the app's Menu.
Select the account pane in the Preferences.
Each active account should have a tick in the Enable this Account box.
This can be unticked.
This will stop accounts logging in but will not stop the app Launching in certain circumstances.
First of all check the app is Quit before shutting down the computer.
The fact the app is open even if all windows are hidden can cause the app to restart when you Start up the computer.
Messages is a Multiple window app and using the red button on the top left of a window only closes that window and does not Quit the app.
Also check the System Preferences > Users and Groups > your account > Login Items tab.
This will list items that are set to Start up when the computer does.
I have a couple of External Drive on other computers, some Anti Virus software and the common iTunes Helper plus an old version of TextExpander that will work if I launch the Preference Pane this way.
9:44 pm Saturday; October 18, 2014
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
TS3161 iWeb 'disappeared' from my iMac after upgrading to OS X10.8 - any ideas? tkx
iWeb 'disappeared' from my iMac after upgrading to OS X10.8 - any ideas? tkx
Did you do an erase and install of Mt Lion? In any case you'll have to reinstall iWeb from its original source. Did iWeb come with your computer? If so you should have a couple of disks that came with your Mac and one of them will have the Bundled Software Install package on it. Like one of these:
Be sure to update iWeb to the latest and last version, 3.0.4, from Apple Downloads web page.
OT -
I recently installed Mavericks on this iMac and upgraded to Adobe Cloud 2014 now InDesign CC 2014 fails to launch and I get a crash report. Has this happened to anyone else?
It isn't happening to everyone else, but if there was a trend of it happening to a lot of people, that would probably show up in the official InDesign user forum. But there aren't a lot of crash reports there, so it isn't something that's happening to everyone. There are a couple, so you might look at those. But since there is not a huge wave of crash reports, the problem might be more related to a problem on the system rather than a problem with InDesign, like a corrupted font.
The best place to troubleshoot is probably over at the Adobe forum since the users there know InDesign very well. -
Can't sync iPhone and iMac since upgrading to Snow Leopard. Using iPhone for internet access. Help??
Hello Brad:
First, forget about a virus. There are NO documented viruses that affect a Mac running OS X - none.
Do you have about 10-15% of the HD free at all times?
Open activity monitor and see what is taking the processor capacity.
Barry -
I get a blank word document opening every time i reboot my iMac after upgrading to OS Lion.
I get a blank word document opening every time i reboot my iMac after upgrading to OS Lion. ANy ideas how to get rid of it? I have uncheked everything in mu users and groups and unchecked restore windows in the general file.
When you logout did you uncheck the Reopen windows when logging back in check box at the bottom of the logout window.
-
Can't use photo stream on my iMac without upgrading iCloud Library?
I can't get my Photo stream to show up on my iMac since upgrading to Photos.
It seems that I have to buy storage for all my photos (18,000+) to get Photos to stream.
Works on my iPhone and iPad.
When I go to OS X preferences >iCloud Photos is unchecked.
When I try to check it, I get this message.
I have Library unchecked, so I should get streaming without signing up for PDid you enable PhotoStream
Settings>iCloud>PhotoStream>On
Are you using IOS5? -
As iMac user upgraded to Mountain Lion lost all Legacy connection with years of Apple/Mac data storage. How can recovery since every default says "no longer supported, After years of Mac software use now it is not accessible ??????
Please provide more details. What version OS X were you using?
Are you saying that Mail faIled to upgrade and you lost your old mail?
Are you asking about PowerPC applications that require Rosetta to run like AppleWorks and Microsoft Office 2004? -
Is Java on my iMac automatically upgraded via the App Store if not how do I download the latest version. I'm currently having a few issues when visiting a website for instance some other site opens at the same time.
Regards,
Ken VooghtI'm not too keen on automatic updates. They can slow down your tasks, and a simple banner ad from a phishing site can make it look like an update is coming, when there is none there, and have you download a trojan horse. It is best to get it from the source directly.
-
HT1423 iMac memory upgrade!
I have a 21.5 inch iMac (mid 2011) and according to apples support I can only upgrade to 4x4Gb RAM. I have 2x4 + 2x8 and that works fine?! I need to upgrade to 4x8Gb. What's the deal?
According to MacTracker, your machine has these specs. Note that Apple says only 16 GB supported, but they claim it'll work w/32 GB, so install them and see what happens.
Maximum Memory
32 GB (Actual) 16 GB (Apple)
Memory Slots
4 - 204-pin PC3-10600 (1333 MHz) DDR3 SO-DIMM -
Can my 2007 iMac be upgraded to run Leopard and Adobe CS5?
I have an iMac I purchased in 2007, along with all new software. I now find I need to upgrade my software, but cannot also afford to buy a new computer. It's ridiculous that a 3 year old computer is obsolete. Especially at these prices.
Rant finished. Please help. Can I add memory, ram, a new video card? I'm a designer... not a mechanic. Apple just wants me to buy a new machine - they offer no help at all.
Specs on iMac below.
Model Name: iMac
Model Identifier: iMac5,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per processor): 4 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: IM51.0090.B09
SMC Version: 1.8f2
Thank you for any help!!!Hi ivyleaf
You can run either Leopard or Snow Leopard on your iMac.
+(I ran Leopard on my 4,1 Core Duo for over a year and now run Snow Leopard without issue)+
Apple no longer sells or updates Leopard, so if you want Leopard you will have to find a black Retail Leopard Upgrade Disk on E-Bay or somewhere like that.
2GB is enough for OS X, but I suggest that you upgrade to 4GB of RAM for CS5
http://eshop.macsales.com/item/Other%20World%20Computing/5300DDR2S4GP/
then buy a Retail Snow Leopard Upgrade Disk for $29 and run that.
http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA&mco=MTc1MTEzNjY
Dennis -
How do I get sound to work on my early 2009 iMac after upgrading to Yosemite?
The sound on my early 2009 iMac has stopped working after upgrading to Yosemite from 10.6.8.
It still makes sound when I boot it up, so I don't think this is a hardware issue.Hi qhaine,
Thanks for the question. After reviewing your post, it sounds like you are having trouble hearing sound from the iMac speakers. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
Troubleshooting issues with no audio from built-in speakers on Macs
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
I am starting from scratch with my iMac (after a crash and unworkable back-up):
Model Name: iMac
Model Identifier: iMac8,1
Processor Name: Intel Core 2 Duo
Processor Speed: 3.06 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 6 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: IM81.00C1.B00
SMC Version (system): 1.30f1
So I installed 10.5.8, now I want to upgrade to Snow Leopard (10.6). Is this not possible? I did this before but the install CD give the message that it is not possible. Do I forget something?
Any help is welcome,
VictorYour computer meets all the requirements, but you need to use a retail DVD to upgrade. A different Mac model's original disks won't work.
(110815) -
Can my old iMac be upgraded for more memory and higher processor speed?
I admit it - I'm not a computer geek. I don't know much about how they work but am proficient in using them. I have an older model iMac. The specs are:
Hardware Overview:
Model Name: iMac
Model Identifier: iMac6,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.16 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 1 GB
Bus Speed: 667 MHz
Boot ROM Version: IM61.0093.B07
SMC Version (system): 1.10f2
System Version: Mac OS X 10.6.8 (10K549)
I get the SBBOD all of the time no matter what. I've tried all of the suggestions to resolve that issue but they don't work. Even when only one program is open at a time it does it. The speed of getting anything accomplished has been dramatically reduced over time. All of my software is up to date. All I need to know is, if I take my iMac to an Apple store, can they upgrade the RAM or whatever is needed to make the SBBOD go away and make things work faster? Sorry for sounding like a dummy here but I'm really not interested in how it works, just that it does work.
Thanks for any help you can give!I did the etrecheck as suggested and here is what it came up with. Does anything look suspect?
EtreCheck version: 1.9.15 (52)
Report generated August 22, 2014 10:07:43 PM CDT
Hardware Information: ?
iMac (24-inch, Late 2006) (Verified)
iMac - model: iMac6,1
1 2.16 GHz Intel Core 2 Duo CPU: 2 cores
1 GB RAM
Video Information: ?
NVIDIA GeForce 7300 GT - VRAM: 128 MB
iMac 1920 x 1200
spdisplays_display_connector
System Software: ?
Mac OS X 10.6.8 (10K549) - Uptime: 0 days 12:43:21
Disk Information: ?
Hitachi HDT721032SLA380 disk0 : (298.09 GB)
S.M.A.R.T. Status: Verified
- (disk0s1) <not mounted>: 200 MB
v (disk0s2) / [Startup]: 297.77 GB (48.61 GB free)
USB Information: ?
Micron Built-in iSight
Microsoft Microsoft Wireless Optical Desktop® 2.10
Brother HL-2270DW series
EPSON EPSON Scanner
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Kernel Extensions: ?
[not loaded] com.olympus.CamBlockCommandsDeviceUP (3.1.0 - SDK 10.6) Support
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[not loaded] com.deploystudio.lkdc_fix.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
User Launch Agents: ?
[loaded] com.adobe.ARM.[...].plist Support
[failed] [email protected]
[loaded] com.google.keystone.agent.plist Support
[running] com.spotify.webhelper.plist Support
User Login Items: ?
Garmin Express Service
iTunesHelper
EEventManager
Music Manager
Internet Plug-ins: ?
DirectorShockwave: Version: 11.5.7r609 Support
Google Earth Web Plug-in: Version: 7.1 Support
OfficeLiveBrowserPlugin: Version: 12.3.6 Support
AmazonMP3DownloaderPlugin1017265: Version: AmazonMP3DownloaderPlugin 1.0.17 Support
AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 Support
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
Silverlight: Version: 4.0.51204.0 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Outdated! Update
iPhotoPhotocast: Version: 7.0
QuickTime Plugin: Version: 7.6.6
NP_2020Player_IKEA: Version: 5.0.94.0 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.07 - SDK 10.6 Support
CouponPrinter-FireFox_v2: Version: Version 1.1.6 Support
GarminGpsControl: Version: 4.1.0.0 Release - SDK 10.7 Support
SharePointBrowserPlugin: Version: 14.4.2 - SDK 10.6 Support
JavaAppletPlugin: Version: 13.9.8 - SDK 10.6 Check version
Safari Extensions: ?
AdBlock
Pin It Button
Add To Amazon Wish List
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.2
User Internet Plug-ins ?
fbplugin_1_0_3: Version: (null) Support
npBcsMcTcIO: Version: (null) Support
BrowserPlus_2.9.8: Version: 2.9.8 Support
CitrixOnlineWebDeploymentPlugin: Version: 1.0.26 Support
3rd Party Preference Panes: ?
BrowserPlus Support
Flash Player Support
MusicManager Support
Time Machine: ?
Time Machine information requires OS X 10.7 "Lion" or later.
Top Processes by CPU: ?
1% WindowServer
0% WebProcess
0% LaunchCFMApp
0% fontd
0% ps
Top Processes by Memory: ?
244 MB WebProcess
134 MB Safari
35 MB WindowServer
28 MB Garmin Express Service
22 MB DashboardClient
Virtual Memory Information: ?
32 MB Free RAM
560 MB Active RAM
276 MB Inactive RAM
154 MB Wired RAM
560 MB Page-ins
346 MB Page-outs
Maybe you are looking for
-
Range of Long type doesn�t fit
Hi!!! I am trying to assign the following value to a variable of type long long A = -140737488355327; The compiler tells me that such integer number is too large. I can�t assign it to A. Sun�s tutorial tells that long variables can hold a minimum val
-
Multi-level UPCs (I can do as pivot table in Access and Excel, but not SAP)
I'm working for a shoe manufacturer. We've got inventory that can be grouped into "cases" as well as "open-case" in regards to UPCs. We're able to apply the UPC to individual items such as open-case stock OR case-only, but we can't figure out how we
-
Workflow Created Tasks not showing up in My Tasks
I'm relatively new to SharePoint and am having trouble with the My Tasks list in SharePoint 2013. Tasks created manually in any task list show up in My Tasks as expected. However, tasks that are created by a workflow using create item in list for t
-
Hi can someone tell, how do i find the other leg(either Dr/Cr) of the accounts in GL,..i query the patch with acount that i'm lookin for but can't fiqure the where the Cr of the debited amount?account are? thank you in advance
-
ViewRowImpl.createMissingEntities: returning null, no matching discrVals
EO is not returning rows if discriminator set. PartyTaxProfileEO has an attribute PARTY_TYPE_CODE which has DiscrColumn as "true". When we tried to debug into the adf code, we found that if the PARTY_TYPE_CODE is null in the query output then this ro