Imac G5 1.8 Grey Screen, Start Up Problem, Any Help Appreciated.

Hello,
I've been having start up issues for about four days. Never had any problems before. Here's what happens:
During start up the start up the usual tone is heard. A grey screen appears and the start up process stops. I am forced to restart and try again. After several attempts the computer start up makes it to the grey apple logo and then the fans max out. I then restart the computer again and it finally starts up. The computer works perfectly once it is finally on all of the way. I have tried the follwing techniques to fix the problem:
Tech Tool Pro: Optimize and Maintenance, program worked fine, fully optimized, but did not fix the start up issue.
Utility Disk from CD: verify disk and permissions, permmisions were corrected, disk repair does not work-error message.
Started in Safe Mode: Checked for extra Login items, none found.
I'm not sure what else I can do. Any help would be greatly appreciated.
Thank you,
Greg Sayles
Imac G5 1.8   Mac OS X (10.3.9)  

You say 'disk repair doesn't work - error message'. It's not clear, but have you tried booting up from your Panther install disk and running Disk Utility from there? Perhaps running DiskWarrior might help (if you have it of course). Failing that you may be looking at an Archive & Install to replace your existing OS with a fresh new one while keeping your apps & files intact.

Similar Messages

  • When attempting to reinstall iTunes, I get the following message "Service (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services" Any help appreciated

    When attempting to reinstall iTunes, I get the following message "Service (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services" Any help appreciated

    Hi emelville,
    Thanks for using Apple Support Communities.  You may need to restart the Apple Mobile Device Service.  This article has instructions that may help:
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/ts1567
    If that doesn't resolve the issue, I would recommend trying a thorough uninstall and reinstall of iTunes as described here:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    Cheers,
    - Ari

  • I just opened my imac, i got the grey screen without apple logo, I just opened my imac, i got the grey screen without apple logo

    I just opened my imac, i got the grey screen without apple logo, I just opened my imac, i got the grey screen without apple logo

    I am curious as to why you repeated your question twice both in the subject box and in the discussion box?
    In answer to your question, have you tried using
    Disk Utility?
       1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
       2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
          Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
       3. Click the First Aid tab.
       4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
       5. Select your Mac OS X volume.
       6. Click Repair. Disk Utility checks and repairs the disk.
    Then, if you can, reboot to your internal drive and repair permissions.

  • How do i get iMac to move past grey screen.

    How do i get iMac to move past grey screen.

    Reinstalling Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Continue button.
    Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

  • At Launchpad when I move the cursor up the screen starts to tremble. any idea how to fix it ?  Jacob

    at Launchpad when I move the cursor up the screen starts to tremble. any idea how to fix it ? Jacob

    HI Jacob, Did you ever solve your problem with Launchpad? I am having the same problem now.

  • HT4623 i updated my ipad 2 with ios 702 today and it has crashed only showing me a black screen with the itunes logo and a charging cable diagram on it. wont turn on at all, any help appreciated?

    I updated my ipad 2 today with ios 702 and now my ipad has crashed only showing a itunes logo and a charging cable pidtogram on a black screen, wont turn on. Any help appreciated?

    iPad is in Recovery mode.
    Hold the Power button and Home button at the same time, keep holding, when you see the white apple logo appear and then let both go. Let it start.

  • I somehow installed a version of Firefox which won't work on my "old" iMac G5 (10.5.8) so I trashed the program and now I can't get it out of my trash bin... Any help appreciated because now I can't empty my trash at all! Thanks.

    I somehow installed a version of Firefox which won't work on my "old" iMac G5 (10.5.8) so I trashed the program and now I can't get it out of my trash bin... Any help appreciated because now I can't empty my trash at all! Thanks!!

    You must purchase a new QT key for each computer.
    Since you have a new iMac, you are entitled to 90 days of FREE phone tech support from Apple and you can use the Chat with a Support Agent. The online chat support _*is available 24 hours a day, 7 days a week.*_
    If you've purchased an AppleCare Protection Plan, you're eligible for the duration of that agreement.

  • Recently updated the the apple tv remote app for my iPhone4. Now can no longer turn on the apple tv "box" on/off using iPhone app.  Only thing that shows on iP screen is music library.  Home Sharing is on. Any help appreciated.

    Recently updated the the apple tv remote app for my iPhone4. Now can no longer turn on the apple tv "box" on/off using iPhone app as I used to do before the update.  Only thing that shows on iPhone screen is music library.  Home Sharing is on. Any help appreciated.  Sorry if this is not exactly the right place to post this!

    One clue: I have found a reliable way to solve the problem when it happens.
    In my network, I have the main Airport Extreme (Gen 1) which is connected to my router, which distributes IP addresses to my internal subnet.  The other two AEs (one Gen 4, one Gen 5) are set to extend the network.
    When I get this problem with an AppleTV 2 that can "see" my library, but when I try to open it, it says it couldn't find the library, it seems to have to do with a change in which Airport Extreme it's talking to.
    If I restart the main Airport Extreme from the Airport Utility, effectively restarting the entire wireless network, then when the network resumes, every AppleTV 2 is happy again.
    Unfortuntely, the problem does seem to recur - but I'm wondering if it's because temporary interference leads an AppleTV 2 to try to connect to a different AE, and somehow that's mucking with the Home Sharing.  Remember, internet access (Trailers, Store, Netflix) have no issues.  Purely Home Sharing.
    Adam

  • My iphone is stuck on the loading screen... Any help?

    My iphone is stuck on the loading screen... Any help?

    Try resetting by holding the home button and sleep/wake button until it turns off ignoring the slide to power down. You probably won't see that if yours is stuck.

  • I spilled coffee on my MacBook. I dried it for 24 hours. It turns on, the keyboard lights up but the screen is blank. Any help?

    I spilled coffee on my MacBook. I dried it for 24 hours. It turns on, the keyboard lights up but the screen is blank. Any help?

    Make an appointment at an Apple store genius bar for a free evaluation.
    Ciao.

  • I have iPhone 4, i updated to IOS 7.1 than my Front Camera (Face Camera) when I switch to it, it just blurs the screen and hangs. Any Help please?!

    When I switch to Front Camera, it just blurs the screen and hangs. Any help?

    I had the same problem.  After numerous attemps to Restore from Itunes, I decided to use the "Setup as New Ipad" option. It went through a few question on new setups. Afterwards all my apps, data, photo's were still intact. Which shows that the Restore from Itunes worked. There must be a small bug that prevents the Ipad to open after "Restore from Itunes" .  Hope it will help you. 

  • Imac freezes on startup grey screen and really loud fans

    My Imac G5 non intel 20" freezes on startup grey screen and really loud fans start and it won't boot. just have the logo on the grey screen.
    I've tried resetting Pram - think that was the right thing to do?
    I've tried disk utility, but it won't settle for me to choose the hard drive, it kind of sticks and keeps rotating the wheel.
    any ideas anyone?
    please help.

    Lots of things you can try - first, try resetting the SMU. Next, boot from your install disc, go to Disk Utility and try to verify and repair your hard drive. If that doesn't work, try running the Apple Hardware Test on one of your install discs.
    Also, depending on which model you have, you may be eligible for Apple's power supply or video and power issues.
    Please post back with results,
    Miriam

  • IMac wont go past grey screen and cog turning

    Hi there !
    I have an iMac, thing is after installing a new OS it won't turn on again, it gets as far as grey screen then the cog keeps turning then it just shuts itself off. I've tried using the disk utility but it fails when I verify disk and repair disk, then the HD name goes grey and when I go to boot options its no longer there to boot from. done all the reccomendations on the apple troubleshoot through start up and fsck. is there something physically wrong with the disk or can it be solved by diskwarrior ? (Oh, I haven't backed up either so any idea's if it can be saved?)
    Cheers
    Ed

    Hmmmmm... I had a very similar issue and I called apple. Do you still have apple care? They are awesome about helping you. With mine, I had to reinstall my OS but I can't remember the little tricks used to do it. Maybe you have already tried that... not sure.
    I hoe that helps.

  • IMac wont boot Past Grey Screen, finder folder with blinking question mark

    iMac G5 won't boot Past Grey Screen. The G5 froze and i restarted, It will not go past the grey screen and it has the finder folder with blinking question mark, also the fans kick on wide open. As it atempts to boot a sound plays "beepda beepda beepda beep" that starts quiet and gets louder and repeats a couple of times. I ran a hardware check on the startup disk and all hardware passed. I thought it might be the RAM any suggestions?
    I have restarted using the troubleshooting methods in the guide.

    Sorry for the late reply. The drive shows up when booting to disk, but it will not allow you to verify disk or repair. Also it will not allow you to select the hard drive to reinstall the software. Under disk utility Maxtor sabre shows up with total capacity:0 bytes.
    I've taking the Mac to the Apple store to get looked at, and its probly the hard drive. Now Im trying to see if theres a way to recover the data myself. I've used software like "Data Rescue" the hard drive shows up "Maxtor Sabre" totally capacity: 0 bytes, and it will not recover anything.
    Did this test just to see if it was power problem.
    http://support.apple.com/kb/HT2173
    Thats when noticed the beeps are coming from the hard drive. So its getting power.
    Now just wondering how to recover data.
    Any suggestions?

  • Imac G5 ALS shows grey screen with blinking folder icon on startup

    Helping a friend - her imac G5 got the blinking folder icon with question mark and grey screen and then wouldn't start. She had OS 10.4.11. I booted from install disk successfully- Disk Util said No repairs Necessary. Disk Warrior hung (never had that happen before). Performed Safe Boot. Multiple reboots were all successful.
    But a few days later, it happened again. Then I did a clean install of 10.5 and all software updates. Restored her user folder from a clone I'd made before starting. All seemed well.
    Now, the grey screen with folder question mark still occurs fairly often. If she restarts, she does get booted. (so far anyway)
    My question: what do I need to do to resolve the grey screen with blinking folder icon on startup?
    Additionally, the computer is slower than before. Does Leopard run slower on these machines than Tiger? (I'd already advised her to get more ram)
    Thanks for your help!

    The blinking folder means just that, it can't find an OS to boot to. Tray zapping the PRAM and it wouldn't hurt to run Rember and if the RAM checks out, she might want to add some, 512 is really a minimum, and Leopard should really have at least 1GB.

Maybe you are looking for

  • Creating an HtmlCommandLink in a Custom Component

    Hi, A simplified version of my problem is as follows: I have created a custom component that delegates to a renderer. Within the renderer I create an instance of the HtmlCommandLink class to which I want to assign an action with the setAction method.

  • Wireless Mighty Mouse has "loose" top shell

    Has anyone else observed/been annoyed by the "looseness" of the top shell on the Wireless Mighty Mouse? I've noticed that the top shell has a definite "give" to it that preceeds the intended click of the mouse. This results in an audible "click" as y

  • Error - Inconsistent Situation in Vendor Evaluation

    I am following Vendor Eval: Config Guide Release 500.  I am on SRM_Plus 5.5 (Highest Level SAPKIBK007).  When I execute Vendor Evaluation from Vendor List - I am getting error "Inconsistent Situation in Vendor Evaluation".  Per config guide, it tells

  • Can Window and aggregate functions be used in Pro*C?

    Are Window functions like dense_rank() over (partition by ... order by ..) available in Pro*C embedded SQL? Thanks Rawender Guron

  • Drag Adjustment Layer to Another Image

    How can I drag a layer onto another image in PSE4? Scott Kelby says "drag-and-drop Levels Layer onto one of your other open photos." I can only see one image at a time in Standard Edit. I opened 3 photos and saw them cascade as they opened; but then