IMac G5 (10.3.9) and Sony Handycam (w/ Hard Drive)

I am trying to purchase a camcorder and do not know which one to get. Sony tells me that none of their dvd or hard drive camcorders are compatible with Mac and would need a third-party software for it to work, however, a friend of mine has an older Sony Handycam (with tapes) and says it works perfectly with iMove and has never had to load any additional software. Does anyone know if the Sony Handycam (hard drive) will work without using pixela software? Or can anyone give me a good camcorder recommendation ... I know that Canon has some models that are compatible with Mac but I don't know which one to buy. Any information would be greatly appreciated. Thank you.

Any camcorder that records on media other than miniDV tape will not interface with the mac in a way that allows you to download the file to edit. That is why the Sony (or any other camcorder) the records on DVD disks don't work. As for brands and recommendations, Sony miniDV tape cameras come highly recommended although other brands also have their fans. You should look at any reputable brand and decide based on $$$ and your personal preference according to needs. But, you need to make sure it records on miniDV tape.
A couple of other notes: The camera needs to have a FireWire interface. And some Canon cameras will only connect via FireWire if no other FireWire devices are connected to your Mac.
Also, you might want to switch your inquiries on this matter to the forums on iMovie and iDVD. Lots of respondents there that have far more expertise than me.

Similar Messages

  • I have lost my imac bootable disks and have erased my hard drive.

    I wanted to format my hard drive and put a clean install of Tiger on my iMac so that I could sell it, so I went in to disc utility and erased my hard drive. What I thought were my bootable discs were for my macbook pro with Snow Leopard on, and they wont work on my iMac. I have since gone in to disc utilities from the bootable discs (just after it tells me these discs wont work) and have replaced my hard drive with the DVD (thinking I would be able to boot to that point and mount an image from another DVD to run tiger from there) and now I am totally lost! I know I shouldnt meddle with things I dont know, but I've never managed to break a windows PC by doing this!
    Could someone help please as I have no idea what I can do now!
    Super thanks
    Helen

    Replacement disks run about 16.00 per disk.  You can buy Mac OS X Tiger from Amazon for anywhere from 79.00-200.00.
    If you buy a full retail copy of an OS like Snow Leopard you can install that on any compatible computer.  The license for a standard retail copy of the Mac OS entitles you to install it on 1 system.  However the retail copy of the Mac OS does not include the iLife Applications which come with the original install disks that came with your computer.
    The individual install disks that come with each computer are made just for that computer and include drivers required for that system.  As a former Dell owner I can tell you that Dell also uses specialized install disks for the OS.  They don't hand you a copy of windows, rather a set of disks that are specific to that model of computer.
    Cheers!

  • I have Imac (OSX10.6.8) and 6 days of emails that were in my inbox have disappeared. They've also gone from gmail server and my back up hard drive. But if I look at "All Mail" on my Iphone the emails are there!! Have I got settings wrong somewhere?

    I have Imac (OSX10.6.8) and 6 days of emails that were in my inbox have disappeared. They've also gone from gmail server and my back up hard drive. But if I look at "All Mail" on my Iphone the emails are there!! Have I got settings wrong somewhere?

    "One of the benefits of Match, right?  Saving hard drive space."
    I would not use iTunes Match as a backup. There are too many bugs and I don't think that's what they intended it to be anyway. The main advantage of using it is to make your music available on OTHER devices, not to replace the music on your original computer.

  • Hi! I have a WD my book external hard drive plugged into my imac and I want to share it over my network with my apple tv. I went into system preferences sharing, checked "file sharing" and added my external hard drive to the shared folder. So now it is

    Hi!
    I have a WD my book external hard drive plugged into my imac and I want to share it over my network with my apple tv. I went into system preferences > sharing, checked "file sharing" and added my external hard drive to the shared folder. So now it is listed in "shared folders" but under "users" everything is grayed out (it says "read and write" for "everyone" - but "read and write" is grayed out, and it doesn't let me add or subtract users). Now I can access all of the folders I shared from my imac except for the externalhard drive. What's going on?

    Hi RRFS!,thanks for help.I forgot to tell that hard drive has 2 partitions 1:format :Mac OS Extended (Journaled) and that works properly,2:format:MS-DOS (FAT32) and when i "get info" for both :first has shering & permitions:You can read and write - with name and privilege, second has shaing & prermissions:You can read and write- without name and privilege

  • I have a iMac 6,1 that I want to reformat the hard drive and reinstall Snow Leopard version 10.6.3 . I don't know how to reformat

    I have a iMac 6,1 that I need to reformat the hard drive and reinstall Snow Leopard version 10.6.3 . How do I reformat ?

    Boot the ssystem from the OS DVD. Once it is booted run Disk Utiltiy. Select OS Extrended (Journled)
    See http://support.apple.com/kb/HT3910?viewlocale=en_US&locale=en_US

  • I purchased a IMac in Feb later I added a Seagate ext. hard drive. On April 29 I received an errors that the ext. Drive may be a read only and not backing up files. I'm unable to check disk permission or correct errors. Help would be appreciated.

    I purchased a IMac in Feb later I added a Seagate ext. hard drive. On April 29 I received an errors that the ext. Drive may be a read only and not backing up files. I'm unable to check disk permission or correct errors. Help would be appreciated.

    Click on the hard drive on the desktop, then File > Get Info. What does it say about permissions?  If this is just a data drive you may want to consider "ignore ownership on this volume".
    Otherwise I can only say I have not been reading good things about Seagate drives recently.  I have some of their rock-solid ones from about 10 years ago (still running well), but now...?

  • My iMac, OS 10.7.5, is abnormally slow on start-up, taking many minutes for my password sign-in window to show up.  I've run Disk Permissions and have verified my hard drive and all is in order.  What do I do to start up my Mac in a normal manner?

    My iMac, OS 10.7.5, is abnormally slow on start-up, taking many minutes for my password sign-in window to show up.  I've run Disk Permissions and have verified my hard drive and all is in order.  What do I do to start up my Mac in a normal manner?

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged after the boot, during the time something abnormal was happening. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. Please include the BOOT_TIME message at the beginning of the log extract.
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

  • I am running Snow Leopard on my iMac and have partitioned my hard drive to run Windows XP. If I upgrade to Yosemite, will I still be able to run XP?

    I am running Snow Leopard on my iMac and have partitioned my hard drive to run Windows XP. If I upgrade to Yosemite, will I still be able to run XP?

    bobfromnorth battleford wrote:
    ...Now what happens if I upgrade to Yosemite on either my iMac or my MBPro?
    If I install VM Fusion or Parallels, does Windows run all the time? How does that affect computer performance? and how much do I need to worry about hard drive corruption?
    Current versions of Fusion and Parallels are compatible with Yosemite. Both are applications which you only run when you want to run Windows within them. As such, there's no effect on computer performance when they're not in use. Like any other software, there is some additional load on your Mac when both Windows and the Mac OS are running together, but any noticeable effect depends on what each is being expected to do and what resources (e.g. available RAM and the number of CPU cores) you can devote to each.
    I think there's less chance of HD corruption with a VM than there is with running Windows natively on the Mac in Boot Camp. Consider that, with a VM, you can create Snapshots of the state of your VM at a given time, and then, if something goes wrong (virus, malware, software installations), you can simply restore the Snapshot in a matter of seconds and eliminate the problems in the process. Moreover you can make a backup copy of the entire VM file, and replace a later version if you wish. Also consider that you can assign, say, 100GB of HD space to the VM, but the actual space devoted to the VM is only what's actually used; as more is needed, more is made available and Windows can't tell the difference. So, for example, my Win 7 Pro VM has an 80 GB virtual HD but only takes up 45 GB on my SSD, and that's with XP Mode in VPC installed inside it.
    Microsoft no longer supports XP, though virus signature updates are still being issued. But MS has installed a pop-up message about EOL that won't go away (it's installed with KB2934207). Even if you remove that KB in Add and Remove Software, the pop-up continues. But if you have a Snapshot or a backup which is prior to it's original installation, you can skip installing KB2934207, and suppress it's reappearance on a Software Update list.

  • I just need to know how you get an iTunes library off the original hard drive of a mac and onto an external hard drive and still have it work normally?

    I just need to know how you get an iTunes library off the original hard drive of an imac and onto an external hard drive and still have it work as it normally would?

    http://support.apple.com/kb/HT1449

  • My iMac can no longer find one of the external hard drive

    My iMac can no longer find one of the external hard drive. It was finding it once in awhile and during one of those times I ran Disk Utility and all was OK. Any ideas?

    Well duh.  I restarted the router and then it was able to find the printer.  There you go.  Thanks.

  • Why does my iMac (with Mountain Lion) no longer recognize my external hard drive I have used as a back up via Time Machine after the hard drive was accidentally unplugged?

    Why does my iMac (with Mountain Lion) no longer recognize my external hard drive I have used as a back up via Time Machine after the hard drive was accidentally unplugged?

    Do you mean the external hard drive is not mounted on the iMac desktop?
    Check if Disk Utility sees the drive. Applications / Utilities / Disk Utility. If the external shows up in the left column, select it and click on Mount.
    If it does show up this way, I recommend using DU to Repair Disk.

  • Can I purchase Mountain Lion and make a flash drive bootable? I do not want to install it on my Macbook Pro. I have Snow Leopard on my Macbook Pro now, and due to my hard drive needing repair I need to boot off of another source, like my flash drive.

    Can I purchase Mountain Lion and make a flash drive bootable? I do not want to install it on my Macbook Pro. I have Snow Leopard on my Macbook Pro now, and due to my hard drive needing repair, I need to boot off of another source, like my flash drive. I am in Paris and my Snow Leopard DVD is in Texas.

    Mac OS X has a built-in disk diagnostic and repair program called fsck or file system consistency check. Here’s how to verify and repair your startup disk with fsck.  As soon as you hear the startup tone, press and hold Command-S on the keyboard. Keep holding down those keys until you see a black screen with white lettering. This is called “booting into Single User Mode.”  As the Mac boots in this mode, the screen reports each step of the process. The line should end in root#.  Right after the root# prompt, enter the following: /sbin/fsck -fy
    If repairing the disk in single user mode fails, it means one of two things. Either your hard drive itself is failing (a hardware failure), or the directory damage on your hard drive is beyond the capability of the built-in repair procedures in OS X.

  • Where can I buy a larger hard drive for my late 2008, 15" macbook pro?  From reviewing questions and answers on the support community it would appear that having Apple remove the old and install the new hard drive is recommended.  But how/where?

    Where can I buy a larger hard drive for my late 2008, 15" macbook pro?  From reviewing questions and answers on the support community it would appear that having Apple remove the old and install the new hard drive is recommended.  But how/where?

    Welcome to Apple Support Communities
    You can install the new hard disk yourself if you want to. You just need a 2'5" SATA II hard drive, which is compatible with your MacBook Pro. You can buy one at OWC > http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/ You can filter hard drives by computer, so press a "Click to view all...", choose your computer in the sidebar and it will give you the compatible hard drives.
    There are different brands for the MacBook Pro. The most recommended are HGST and Seagate, which have good reputation. A 7200 rpm hard drive will give you extra performance

  • How to install an SSD in a MacBook Pro and keep the original hard drive

    Step by step instructions on how to install a Crucial SSD as the primary drive in a MacBook Pro and use the original hard drive as a second drive in place of the optical drive.
    Apart from the time needed to back up your data and clone the original drive to the new SSD, you should be able complete this in less than an hour. 

    Verifying
    Install the SSD in the HDD slot
    Install the HDD in the optical slot
    Boot to the HDD and format the SSD
    Boot using Command R and restore the operating system from Time machine to the SSD
    Reformat the HDD and restore the data files to it.

  • Hallo ,why is it that when I delete a photo ,which is backed up by time machine and western digital external hard drive , that I am able to restore the photo okay but not the titles and descriptions . I have  a Macbook 4.1, mac osx 10.5.8 . Iphoto 7.1.5 ,

    QUESTION.
    Hallo , my question is ;whenever I delete a photo and restore it through Time machine and Western digital external hard drive , I am able to restore the photo but not the titles and descriptions . Western Digital inform me that it isn't their external hard drive problem and suggest that it is an Apple software problem ?
    I am using  a Macbook 4.1 , with Mac OSX 10.5.8 . I photo 7.1.5 , last modifie4d 01/05/2010 -universal . Should I be upgrading  Iphoto ?
    I hope that someone is able to help in this matter , as i have to restore 12000 photos !
    Thanking you in anticipation.
    Alan from Wigton

    Hallo  Kieth ,
    I am not quite ready to restore the full iphoto library , as I have days of work re - imputting titles,descriptions and enhancement . I hope that your suggestion works , as I use my Macbook basically to work with digital photography. Through time , I will need to delete my library to recover more disc space and I would hate to have to spend more time re - imputting titles and descriptions all over again .
    Thanks for your interest and advice.
    regards  - Alan

Maybe you are looking for

  • Downloading ...

    I keep getting msg saying I need to update my Adobe Flash.  When I do I get msg saying I have a newer version already installed. Any download is "unsuccessful".   I keep going in circles and can't view anything.    Thhis is a recent situation.    Win

  • Configuring Static Route Tracking Using ASDM 7.1(3) ASA 9.1(2)

    I have recently updated my ASA5520 to 9.1(2) and I am using ASDM 7.1(3) to configure Static Route Tracking. I have done this previoussy in earlier version of ASDM without a problem.  There seems to be a new field in the Tracked Options section.  What

  • Error message when running SBO 2007B PL12 Client

    Dear Experts, Upon a fresh installation on a client of SBO2007B PL12 Client and DIAPI, when I startup the client application, it prompt me the below error: The procedure entry point ?CompareNoCase@SBOString@@QBEHPBG@Z could not be located in the dyna

  • Error 3005 using Database Connectivity Toolkit

    I'm using the LabVIEW Database Connectivity Toolkit, version 1.0.132 with LabVIEW 8.5. When it tries to create an ADODB.Recordset object in the Conn Execute.vi, the "Automation Open" function node throws error 3005, "The specified object can't be cre

  • Wad report stuck the system

    Hello, When I use a WAD report and do an operation that takes the system a lot of time to calculate the system is stuck and even if I regret that I did this operation and wants to start the report from the beginning the system will be stuck. Just whe