IMac G5 17'' - Bluish screen

My iMac g5 17'' display has turn bluish, but when i connect an external display it seems fine. Does anyone know what's wrong?

Mine too! Within the last week the screen started flickering and has now settled into an almost monochrome blue. My photoshop defaults are white and blue; even the flurry screen saver is on a field of blue. What gives? The RGB now seems mostly B.
My iMac g5 17'' display has turn bluish, but when i
connect an external display it seems fine. Does
anyone know what's wrong?
20in iMac G5 Mac OS X (10.4.9)

Similar Messages

How do I use an external Monitor to access files on my iMac with a broken screen?

I have an 20 inch desktop iMac with a broken screen. It is the files on the computer that I wish to recover, after that, I can be on my merry way. Unfortunately, VileVault was on (Not my choice), and for some reason, when I target the disc image of the broken mac with a new one, ONE of the accounts "appears" to be completely empty. All of the accouts were running FileVault, but only one (mine) failed to be transferred because it is "empty". I refuse to believe that my files are actually all gone, because theoretically there should be nothing wrong with the CPU itself, just the screen.
Thus my goal is to use a monitor on my broken screen iMac and simply log in and access my files normally, and perhaps pull them out with a USB or something. I have a DELL monitor, and a DVI (The big hairy plug with screws I think) converter that works with my old iMac, along with the male/male DVI cord. However, when I hook it up, nothing happens. I have tried booting the old CPU while holding F7, and option as I read on a forum, and neither produced results.
Does anyone have any ideas on how to 1. Get the monitor to simply show what's going on on the mac? or 2. Pull out my files through some other means?
Thank you.

If you have a second Mac computer, you may want to try to copy over as many files you can. One way is to use target disk mode.
http://support.apple.com/kb/HT1661
http://lowendmac.com/misc/06/0710.html
You need to follow this procedure to recovering a filevault id. Mac OS X 10.3, 10.4: FileVault - How to verify or repair a home directory image ... http://support.apple.com/kb/HT2631?viewlocale=en_US
Robert

I have an iMac G5 isight (20" screen) Leopard OS 10.5.8 I do not have an intel chip. I am unable to open movie links on facebook using Adobe flash player. I called Adobe Systems and they said Adobe no longer supported computers that did not have intel chi

I have an iMac G5 (20 inch screen) i sight (no intel chip).Leopard OS 10.5.8. Recently I went on Facebook and tried to open a movie site someone had sent me on Facebook andwhen I tried to open the video on Facebook, I was told I had to upgrade my Adobe Flash Player. i tried to do this, but turns out that Facebook is requiring folks to have an intel chip in order to view movies...this is outrageous! Just think of all the folks in the world who have great running pre intel chip Apple computers. I called the Adobe Help line and was told that I really needed to buy a new computer....no thanks. How do I find a way to get a new version of Adobe for Facebook and youtube. I wish Apple could develop a way to have intel chips installed in the older computers. If you have any suggestions on this please let me know.
Thanks, Sarah

Either get a screen cleaning cloth, or carefully us a slightly damp lint-free cloth and dry off with a dry link-=free cloth.
As to Flash Videos: I am in a similar same boat. I cannot watch flash videos on the BBC website or on BBC iPlayer, although all other flash videos (YouTube and FaceBook for example) are fine.
For reasons that passeth all understanding, they work with the PPC version of Firefox, called TenFourFoxG5.app, once you have anabled plug-ins, as it does not natively support Flash.
You can download TenFourFoxG5 from here:
http://www.floodgap.com/software/tenfourfox/
Now for the intersting bit: TenFourFox, like Firefox, does not support most plug-ins. Unless you are prone to headaches (in which case don't) you can read about that here:
http://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
But there is a workaround!
Open TenFourFox and type in the address bar: about:config (no spaces) and click return. This gives you a warning that it might harm the application. Ignore that and click on 'I'll be careful, I promise' and you get the config file that you can edit - with great care.
Look/search (scroll down) for: tenfourfox.plugins.enabled
Set it to true. (Double click it to toggle it)
Now close TenFourFox, open it again, and Flash will now work, as it now uses the plug-ins that Safari has stored.
I am using Flash 10.1.102.64 in TenFourFox and it works just fine.

My Imac is showing gray screen with red line when booting and restarts again

My Imac is showing gray screen with red line when booting and restart again, I can load it in windows 7 safe mode with red lines across the display, pls help

The graphic card is damaged. You can't do anything more than taking your computer to an Apple Store or reseller and getting your graphic card replaced.
Sometimes, when the graphic card is damaged, operating systems can't start. That's caused because the drivers that make the graphic card work detect an error, telling the operating system that the graphic card is unusable, so the operating system can't start and it restarts. However, you can start in safe mode because operating systems use a basic driver in this startup mode

My iMac has a blank screen with an icon showing a flashing question mark. I have rebooted and still nothing but that on the screen.

My iMac has a blank screen showing an icon with a blinking question mark. I have rebooted and still the same. Any ideas?

Mac OS X: Gray screen appears during startup BTW, iOS info is useless, post machine and OS version specifics.
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

Apples update didn't work for me: Boot Camp: iMac displays a black screen during installation of Windows 7

Boot Camp: iMac displays a black screen during installation of Windows 7 - Apple Support
I have followed each of the steps listed in the link above with no success.
Prior to adding the extra drivers I was able to start the Windows install process up to reformatting the "Windows" Bootcamp drive. After that the computer would go through some instal processes and eventually restart. After the restart the screen would go black. The black screen lead me to the Apple Support link above dated March 5 2015. After going through steps listed in the link above, I get an error message stating that the D:\Sources\instal.win. file cannot be located. I am forced to restart the computer at that point and theWindows install process attempts to start again but always ends up at the same point.
Note: I am installing windows 7 Pro from a DVD. I scanned the AutoUnattend.xml file and noticed that it refers to "Windows 7 ULTIMATE" but not "Pro" or any others that I could see. (see below). Could that be part of the issue?
Any feedback would be greatly appreciated.
<cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 ULTIMATE" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>
iMac (27-inch, Late 2009)
2.66 GHz Intel Core i5
16 GB 1067 MHz DDR3
ATI Radeon HD 4850 512 MB

Here is an over-simplified explanation of WIM and CLG files. Assume your DVD Media contains
W7- Ultimate
W7- Professional
W7- Home Premium
W7- Home Basic
WIM Files
File1
y
y
y
y
File2
y
y
y
y
File3
y
File4
y
y
File4
y
y
y
The File .wim will contains a compressed image which contains File [1...5].
The W7-Ultimate .clg will have 5 entries, with all set to 'Y'.
The W7-Professional .clg will have 5 entries, with 'Y','Y','N','Y','Y'.
The W7-Home Premium .clg will have 5 entries, with 'Y','Y','N','N','Y'.
The W7-Home Basic .clg file will have 5 entries, with 'Y','Y','N','N','N'.
This allows a single .wim Image file on the DVD media to be used to install any of the 5 flavors of Windows. When you enter your product key, the Installer knows what specific W7 variant you have the key for and will tell the WIM to extract the specific files the installer needs to be extracted.
The following line
<cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 ULTIMATE" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
is telling that a retail product key will be entered, which should go look for this specific .clg file (from the five you already have on disk). You can test if it will work for you by changing this line to the following
<cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 PROFESSIONAL" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
If it does not work, the other issue can be related to device discovery. Typically A: and B: device names are reserved for Floppy Drives. C: is your internal HDD.
D: can either point to the Optical drive, or the USB. The normal convention is that the removable media is named from Z: backwards. Y: and Z: are usually used for Network drives, so X: should be your USB. First try with the change to "Professional". If it does not work,

Using iMac (Intel) as second screen.

Is it possible to easily use an older iMac as a second screen to a new MacBook Pro?
This would obviously save the cost of purchasing a new monitor.
Thanks for any advice/instructions/rulings.

Short answer is no. You need a late 2009 or later iMac to use Target Display Mode Target Display Mode: Frequently Asked Questions (FAQ)
There are software work arounds but they may or may not meet your expectations http://www.screenrecycler.com/ScreenRecycler.html

My Kids we on my 24 in iMac. Now the screen is "Zoomed in" and I can get it to go back to nomal for an application/desktop etc. The monitor is set at correct resolution. Help!

My Kids were on my 24 in iMac. Now the screen is "Zoomed in" and I can't get it to go back to normal. Tried resetting resolution, rebooting in safe mode.
Help!
Thanks.

Tap the top of the mouse with two fingers.
To turn off this feature, Un check the "smart Zoom" box

2007 intel based iMac has the white screen of death with the mouse visible?? WHATSUP

My 2007 Intel based IMAC has the white screen of death with the mouse cursor as the only visible item. What is up with this? Is this the equivalent of the windows blue screen of death?
Doug

Read the "More Like This" thread links located at the bottom left of this page.

IMac Freezes Periodically During Screen Saver Only

I own a late-2006 Intel-based iMac. Over the last few months, I've noticed that the iMac freezes when the screen saver is running. This doesn't happen all the time, and it doesn't matter what screen saver I use. (None of the screen savers is a third-party.) The iMac doesn't freeze at any other time.
Any ideas?
- Keith
P.S. I'm running Snow Leopard right now, and it happens even with Snow Leopard, just as it did with plain ol' Leopard.

Your iMac has a dedicated Graphic's chip (GPU), while some of the Late 2006 17" iMacs had a GMA 950 graphics processor with 64MB of DDR2 SDRAM that shared with the main memory. To check which Graphic's chip you have go to: Apple > About This Mac > More Info and in the Hardware section select Graphics/Display.
If you would like to monitor the temperature of your GPU, CPU, HD and Memory check out the iStat Pro widget > http://www.islayer.com/apps/istatpro/
The main reason I suspect the lack of RAM over an overheating GPU is because you only reported a problem with the Screen Saver and not with other intense graphic's like movies, videos or games.
Please let us know how you make out with the RAM upgrade.
Dennis

HT201177 cant turn on my imac just a black screen which i never shut down to begin with

help i walked in to find my imac with a black screen and i cant turn it back on has this happened to anyone else? how do i get it back on

You're sure the electrical socket it's attached to has power? That socket isn't controlled by a wall switch, which is off? If the socket is good, see this Apple note for systems that won't turn on.

Use my iMac for as macbook screen?

I recently purchased a hendge dock for my macbook (early 2010) in order to save desk space, but I would like to use my iMac 27" as a screen in certain instance. What are my options in order to make this a reality? Thank you.

If the iMac is a 2009 or 2010 model yes you can do this otherwise, nope! The feature is called Target Display Mode, Apple explains it in Target Display Mode 2009 & 2010 iMacs

Imac a1225 shimes but screen remains black... what can I do?

imac a1225 shimes but screen remains black... what can I do?

Try smc and pram reset.
See if you can boot in safe mode.
See if you can boot from your lion recovery partition to use Disk Utility to repair/verify your drive (not repair permissions).
OS X Lion: About Lion Recovery
Run Apple Hardware Test.
OS X Lion: Use Apple Hardware Test

Imac frozen at blue screen after i went into disk utilities and cleaned my free space. I tried holding down T key as it reboots and i get a message. Start up disk full empty it how can one emptie it if you cant get past the blue screen

Imac frozen at blue screen after i went into disk utilities and cleaned free space.
I tried holding down T key as it reboots
and i get a message. Start up disk full empty it how can one emptie it if you cant get past the blue screen?
to make matters worse we bought the IMAC of amazon uk on the 4/07/011 so what can we do?
please remember how frustrating it is when asking for help when the helper telling you to type something on the screen when its frozen
Tell us when you can type some instuctions to the software how do you get to the doss prompt so to speak to do this
Thanks

i tried all this thanks
i can not get past blue screen and message Your disk is full it needs to be emptied Please not I cant proceed past this message.
no matter what you tell me
Am i right ok in thinking that
when i went into disk utilities and chose to clean my free space i left it over one hour to do its stuff
i came back and there was no progress bar just the box so i quit the program and when i opened mac mail the system just froze i forced quit mail rebooted and blue screen death
Now when free space is being cleaned is it the same as windows dose the utility write lots of 0 on the hard drive then rebbot its self to free the space
basicly is my hard drive full of 00000 is this why im getting this message because the process was interupted
I need to know if i need outside help i bought the computer on line on amazon uk what dose one do next

Can I replace the power module in my iMac G4 17" Flat Screen computer?

My iMac G4 17" Flat Screen will no longer power up. It has been getting slower and slower the longer it was running until finally I have no power at all.
Can I replace the power module, where do I get one, how much do they cost and how big a job is it to swap it out?
Any help, or information that you can give me will be greatly appreciated.

Can I replace the power module, where do I get one, how much do they cost and how big a job is it to swap it out?
To repair your iMac G4 17" Model you can go to iFixit

IMac G5 17'' - Bluish screen

Similar Messages

Maybe you are looking for