IMac G5 17" iSight No keyboard/mouse

I have a 17" iMac G5 w/ iSight (1.9Ghz). It boots up but loses the ability to power the keyboard and mouse at log in. Actually, I can get the mouse to light up if I plug it directly into the computer, but no control of the cursor.
Any suggestions or advice? Thanks in advance.
Sean

Two things, first, reset the SMU and then, if you can connect to the keyboard, reset the PRAM.
If that doesn't work try using Target Disk Mode to run Disk Utility and repair the drive. Try to borrow another keyboard and mouse and see if they work, also, try logging in on another account and see if you can work that way.
Please let us know how things work out,

Similar Messages

My iMac loses connection to the keyboard/mouse while installing Windows 7 on Bootcamp

I have used bootcamp assistant to install windows 7 on my brand new iMac. I used a flash stick to install the Windows OS.
When I rebooted the system, the iMac gave me an error message that it couldn't find a bootable disk and it asked for a bootable disk to be connected and to press any key. I did press a key, but it did not respond. I found later that both my usb keyboard and usb mouse don't have power.
I manually restarted and used pressed the option key to select the flash stick as my bootable device. It loaded and started to boot and load windows to the point it presented me with a screen to select the language etc. They key board and mouse seesed to work. I couldnt type nor move the mouse.
I tried again using the Bluetooth keyboard and mouse but I got the same problem.
Is my iMac broken? Or did I do something wrong.
I have installed the latest version of mavericks and installed all the updates.
Please help.
Thanks.
Tareq

I called the local seller who sold me the iMac regarding this problem. He confirmed that they had many problems with the latest iMac (Late 2013) Windows 7 installation and recommended that I install Windows 8 instead.
I am not excited about Windows 8 as I need to buy a new license and get used to a new interface.
I downloaded a fresh copy of Windows 8 (without a license of course) just to test that. I repeated the who process. I am glad to report that I was able to get past the first screen to select language and local setting and was able to use the mouse and keyboard. I stopped on the second screen where it prompted me to enter the license number.
My concern is that I go and buy a Windows 8 license to find that it will not install as well. Any suggestions?
Why Can't I install Windows 7 on this iMac (latest 2013)? Has anyone else face the same problem? is there any solution?
Any ideas?
Tareg

IMac not recognizing bluetooth nor USB mouse and keyboard

The iMac I use has suffered a pretty annoying problem. I typically use a wireless keyboard and magic mouse with the iMac (I could be wrong, but I believe these both use Bluetooth technology). First, the iMac stopped recognizing these. They kept losing connection last Friday and then suddenly stopped recognizing them at all. Yes, they both have full batteries and blink to show me they are on and searching for the iMac.
Second, I tried using a USB mouse and a USB keyboard to get into the iMac and fix the problem. But neither are recognized by the iMac as well. The mouse is a Dell model that has a red light on the bottom, and it glows red for less than a second when I plug it into the USB port before going dark again and not working. So, I can't get into the iMac to fix the problem.
I've read a few other things on the community boards. I restarted the iMac. I unplugged it completely for several minutes and held down the power button for fifteen seconds while the power was unplugged. I've tried multiple mice and keyboards, all to no effect.
Is the iMac not recognizing the USB keyboard/mouse because it's still searching for the bluetooth versions that it will no longer recognize? Is there a way to fix this without setting up an appointment with the geniuses?
Thanks!

I'm having the same problem. It started happening on my Late 2012 model iMac 21.5" after applying the latest update.
What I found was that nothing seemed to work connected directly to the iMac. However, if you attach an externally powered USB hub, then all devices attached to the hub will work. It seems as if the USB ports are still working, but without power.
After I was able to get my USB keyboard to work, I was able to zap the PRAM (hold command-option-P-R while powering on) and then magically everything was back to working again. Unfortunately, this was short lived as the problem has resufaced again for me today, but you could give it a try anyway.

Intel iMac; upgraded adobe flash; bluetooth keyboard no longer pairs but magic mouse still OK. With Bluetooth switched on the screen splits into 4 areas and open windows seperate and shrink. Switch off Bluetooth and problem disappears and iMac works OK

Intel iMac; upgraded adobe flash; bluetooth keyboard no longer pairs but magic mouse still OK. With Bluetooth switched on the screen splits into 4 areas and open windows seperate and shrink. Switch off Bluetooth and problem disappears and iMac works OK with plug-in keyboard and mouse

Hi, Derek -
...the screen splits into 4 areas and open windows seperate and shrink.
Sounds like Spaces is being activated somehow. With the wired keyboard and mouse in use, select the Exposé & Spaces control pane in System Preferences, click the choice in that pane for Spaces. See what the settings are. There are some activation settings in that pane - by default, F8 activates it.
It could be that the bluetooth keyboard has some stuck keys and is activating Spaces; or that the activation command has somehow been reset to something that the bluetooth mouse, or bluetooth itself, is triggering.

Using iMac as external display, keyboard, mouse

I would like to use my iMac as an external display, keyboard, and mouse for my windows laptop. Is there a gizmo that will allow me to do this?
When I am using my work computer (windows laptop) at home, I prefer to have a full size display, keyboard and mouse and would like to see if I can use my iMac for this purpose.
21.5” iMac mid-2011

dwh wrote:
I would like to use my iMac as an external display, keyboard, and mouse for my windows laptop. Is there a gizmo that will allow me to do this?
When I am using my work computer (windows laptop) at home, I prefer to have a full size display, keyboard and mouse and would like to see if I can use my iMac for this purpose.
21.5” iMac mid-2011
No, not unless your Windows box has a Thunderbolt output port which it almost certainly does not. Please carefully read Apple's Target Display Mode 2011 Macs that extplains.

Using powerbook keyboard/mouse to interact with imac

i have seen similar questions to this, but nothing exactly like what i am doing.
my problem is as follows...
i have an imac (2009 edition) hooked up to my television. the imac is in a bedroom and the tv is in the living room, so whenever i want to switch what is being sent to the tv, i have to go into the bedroom to do it. one solution to this would be to buy a wireless keyboard and mouse (easy enough). what i am wondering, however, is if it is possible to use my powerbook, which sits on the coffee table in the living room, to control the imac. i dont need to see the screen of the imac since it is on the tv in front of me, i just need the key strokes i hit to register on the imac, and the mouse movements to apply to the imac and not my powerbook.
i have read suggestions about using synergy, which allows one keyboard and mouse to control two computers. this could be what i want, but i want the powerbook control over the imac to be temporary, so that when i am in the bedroom, controlling the imac, i can use the imac keyboard and mouse.
does anyone have any experience with this or ideas of what i should do. it would be nice to re-use my powerbook and save $100 by not getting a wireless keyboard/mouse.
thanks!

It would need to be running Leopard, yes - and the iMac disk will be machine-specific and won't work. You can still, however, use VNC, which is the basis for Screen Sharing. On the iMac, go back to Sharing, Remote Management, Computer Settings, and tick and set a password for "VNC viewers".
Then, on the laptop, install Chicken of the VNC, launch it and locate your computer in the Open Connection dialog. You may need to add its address manually. Enter the VNC password, and you will be able to control the iMac.
Matt

New iMac 27 with the Wireless Keyboard and Magic Mouse

Is it just my keyboard or does the wireless keyboards that come with the iMac 27inch just SUCK? ALWAYS and I mean ALWAYS losing its connection. The keyboard is ALWAYS losing its connection. The mouse, barely, but sometimes, maybe once every 2 days. The keyboard. Several times an feffin day. What gives? Should I have them exchanged or are others experiencing this BS?
Did Apple just RUSH out the new iMacs without properly QAing????? WT*?

I thought I read that with two batteries there is no problem-only with three.
I can only provide a sample of one but the new keyboard which came with my i7 is still at 100%. Regarding the Magic Mouse, I am on my second set of batteries. The i7 is on day 40 of use. I also have a Magic Mouse paired with my 24" 2.8 Intel iMac which has a wired keyboard. The 24" sits idle much of the time and the original batteries show 91%.
Message was edited by: ScotMij

Question regarding Windows 7 w/iMac and bluetooth keyboard + mouse

I installed Windows 7 Home Premium, thru Boot Camp 3.0. My iMac 10.6.8 restarts w/a black screen. After reading the previous posts, I guess this is b/c I am using a bluetooth keyboard/mouse. Will any corded keyboard/mouse work or does it have to be an apple product? I am hours away from the Apple store, and in a very remote area. I could try to find someone with a PC corded keyboard/mouse if it would work.

Helps to have wired kb/mouse until BT and drivers installed.
Even a tech article here http://www.apple.com/support/bootcamp
Any will do. I use a lot of 3rd party kb and always use MS optical mice. Apple puts their own firmware in some keyboards which I don't understand and can cause problems of their own.
It isn't what OS you run as much as what model year the iMac.

IMac keyboard/mouse Freeze, (Bluetooth AND USB!)

A few weeks ago my iMac started to freeze ramdomly, mouse/keyboard dont work, I even tried a USB mouse and keyboard with bluetooth tuned off, and the same thing happens, and when it freezes there is nothing (I tried desconecting USB keyboard/mouse, switching USB ports with no success) I can do but to unplug it from the power and plug it back in, but the weird thing is that I have LogMeIn installed, and when it freezes I am still able to use the computer thru LogMeIn, and I even WIPED my main drive, and WHILE reinstalling mountain lion the SAME thinga happened, mouse/keyboard would freeze.... I dont know what to do anymore.... please help!

Thanks for the feedback. BTW, for future reference, if you have AppleCare's protection plan and you're within 50 miles (80 KM) of an Apple repair station, you're eligible for onsite repair since yours is a desktop machine. My 27" iMac's HD went south and they replaced it onsite. Took about 1 1/2 hours. There wasn't any other down time, since I had multiple up-to-date and bootable clones on ext FWHDs and could run it until they got the parts and could come in. It was interesting to learn how these boxes are put together.

Imac G5 (pre isight). Mass Storage Error

I have an imac G5 (pre-isight). Using Tiger. Recently it has been playing up. Two main problems: starting up and waking after sleep mode.
*Starting up issues*
There doesnt seem to be a consistent problem here. Sometimes it hangs on the grey apple screen, sometimes grey probitory sign screen. Sometimes it hangs on a black screen with white writing. On about the 10th to 20th time of rebooting, it seems to startup and work fine.
*Sleep issues*
If I leave the computer to go into sleep mode, it tends to freeze in whatever application is open. Especially Safari.
I have tried numerous fixes. I've reset PRAM, done the SMU thing. Repaired and verified disk many times. Repaired and verified permissions. I've archived and installed and archived and erased. There's barely any software on here apart from the operating software and MS Office (legal). I'm using an apple keyboard (wired) and a wired mouse. There's no important info on here so am happy to wipe everything.
Finally i did a hardware test and received a "mass storage error" (only appeared for the extended test)...
2STF/8/3: S-ATA Bus 0 –Master
Having looked up several forums i replaced the hard drive. (Made sure it was compatible, similar size and same specs as original). Reinstalled software and got all the latest updates. Seemed to be working quite well for a day or so, although there was a few 'permissions' error which seemed easily fixed.
Today i awoke the imac and it had frozen. Back to it's old tricks. Tried restarting and got grey screens, black screens etc. Repaired permissions. Ran another hardware test and getting the same error message about mass storage!
So if it's not the hard drive, what's wrong for my imac? Is it time to just dispose it?
Thanks in advance for any ideas you may have.

The recall ended many moons ago, and it's a capacitor problem, they all need replacing, those in the power supply as well, probably.
If you are handy with a soldering gun, have steady hands and are good at repairing electronics, you can do it yourself. Look at [welovemacs.com] or [synaptech.com] for parts and advice.

USB Slots don't work on 17 inch iMac 1.9 (iSight)

My USB slots won't work on my 17 inch iMac 1.9 (iSight). I tried them with more than one USB device, with the same results. I even tried two different keyboards and nothing. The serial number is: W85434WQTAQ

So your USB keyboard and mouse do not work? You can try resetting SMU (power management). Normally, I'd suggest resetting PRAM first
http://support.apple.com/kb/HT1379
but that may not work if your USB keyboard is not working... If resetting PRAM does work, I guess the USB port connected to the keyboard must be working. If it does not help (or does not work), this is the procedure to reset SMU on iMac G5
http://support.apple.com/kb/HT1767
When you connect it back to power, if you were using a power strip of some type, try connecting it directly to a wall outlet by itself (at least initially). Start it up with nothing except power cord connected, then add standard keyboard and mouse. Note if they are working or not. If they are working, is your problem with other USB devices also solved?

Keyboard & mouse stopped working

I just recently bought a new iMac i7 2 days ago & installed Windows 7 Ultimate 32 bit through bootcamp. Everything was working fine until Windows installed updates. Now when it gets to the windows login screen, the mouse and keyboard stop working so I can't even type in my password to login.
I've gone through many of the posts here & around the net but nothing has solved my problem. The indicator light on the keyboard & mouse just continue to flash but won't connect. I start up Mac OS & everything works fine so it had to be a Windows update that caused the problem since it was working fine before the updates. Any help would be greatly appreciated.
Also want to mention, I'm still fairly new to Mac, as I only used it for video editing in school, so please bear with me if I follow up with ridiculous questions while still familiarizing myself with the new setup.

Hi coolfonz,
for the proper set-up of your keyboard & mouse you'll need to use a wired mouse & keyboard (then you'll have to update the drivers for those wireless probably).

Windows 7 64-bit with Boot Camp 5: keyboard & mouse don't work

Running OS-X 10.8.5 on iMac 27 Late 2013. Everything goes smoothly installing Windows 7 64-bit with Boot Camp 5.0.4 until Windows does its final reboot (after a complete, apparently successful install), and begins the Windows setup sequence. The first setup screen asks for User name and PC name. My mouse and keyboard do not work at this point. Tried cold rebooting: Windows boots up, detects it needs to do first use setup, and gets to same failure point.
NOTE: I have never had a chance to install the Windows support drivers; but the mouse and keyboard worked through out the istallation.
I've tried two different W7 versions: 64-bit Pro and 64-bit Enterprise [Enterprise is not supported, but I have installed it on an iMac 27 2010, and a MacBook Air 2013.]. Both versions of W7 hang at the same point described above.
I've tried a Windows DVD install disk plus Windows support drivers on a flash drive; and I've tried a bootable flash drive with everything on it. Both fail at the same point.
I have tried both wireless and USB keyboards and mouse. Same failure.
I have even tried removing the flash drive with Windows support drivers before the final reboot. Same failure.
NOTE: when I reboot in OS-X and go to the Startup Disk, the windows option says "Untitled Windows" instead of Boot Camp; but I can select it, and it starts the Windows boot which ends up at the same Windows setup failure point.
Has anyone had the same problem?
Has anyone succeeded? If so, any special actions or ideas?

The issue may be related to the iMac 2013 only having USB 3.0 ports and that windows 7 does not come with drivers for it. Try the following (borrowed from answer on Mac Rumors Forums http://forums.macrumors.com/showthread.php?t=1659481):
<quote>
If you run into issues with keyboard and mouse not working (due to USB 3.0 and Win 7 incompatibility), you need to run your Win 7 partition (and Win 7 installation disk/partition) in legacy mode. (I found this information at:http://twocanoes.com/winclone/support#faq123 - see "Method using Terminal"). Here you will be setting the legacy on the installation volume of win 7, not bootcamp partition (yet). After running the diskutil list find the volume with installer of Win 7, and then run the command (substituting the disk1s2 below with the information you find through diskutil on your computer:
sudo /usr/sbin/bless --device /dev/disk1s2 --setBoot --nextonly --legacy
Enter administrative password when prompted. Next, select Restart from the Apple menu. Do not hold the Option key while restarting.
You should have mouse/keyboard working. Begin the Windows 7 installation. Upon first restart right after the installer completes, boot into Mac and set the legacy mode for the BootCamp partition (but this time without the --nextonly flag), so you can use keyboard/mouse to complete the installation and thereafter until the USB 3.0 drivers are installed).
</quote>

Boot camp will not recognize wireless keyboard/mouse - will they work with a 32bit version of Windows?

I have a new iMac 21.5" - 4GB ram, 3.60 GZ processor. Installed bootcamp partition with Win 7 Pro 64 bit - it was sealed box. Could not get it to recognize the bluetooth keyboard/mouse that came with the unit last Thursday.
From page 5 of the instructions, "What You Need" - The Keyboard and mouse or trackpad that came with your computer. (if they are not available use a USB keyboard and mouse.)
I did follow all the instructions for getting the drivers installed. Went to all sources of info on the subject from Apple support, internet discussions and forums. It seems that it is a common and seemingly unsolveable problem that Apple does not yet have a solution for.
The question - will the 32 bit Windows 7 Pro have the same problem?
BruceM

You need 3.1 or better yet the drivers from Lion and Boot Camp 4.0
BC 2.x was only for Vista and XP
You don't actually "run" Boot Camp 2.x as much as partition with the Assistant, and install motherboard support drivers to Windows.
"I am USING Boot Camp 2.x"
You're running Windows -- natively.

Bluetooth Keyboard/Mouse/Trackpad won't automatically connect after installing Boot Camp

Hey guys!
Another peculiar thing happened to me today with my 3-week-old maxed-out 2012 iMac (other than it kernel panicking when I powered it down the other day...did I mention this was 3 weeks old?).
After installing Boot Camp which I will never do again, my iMac (on the OS X side) no longer recognizes my stock Apple Wireless Keyboard, Magic Trackpad, or Magic Mouse automatically, until I press a button on the keyboard and wait 5 seconds, click the trackpad and wait 5 seconds, or click the mouse and wait 5 seconds.
(The Windows 8 Boot Camp side pairs with the devices immediately after Windows boots, which leads me to believe that the bluetooth devices are defaulting to look for Windows.)
One of my huge fears I had when considering purchasing an iMac is that the Bluetooth devices wouldn't immediately connect. Being a power-user with former Mac notebooks and working understandably fast having owned a web development company for 8 years now and not having to worry about Bluetooth device pairing, I'd like to think this fear is substantiated. But after first use (before installing Windows 8 with Boot Camp Assistant) it functioned normally and the iMac would automatically discover my peripherals and connect them by the time time computer turned on. I also had no trouble holding the Option key on boot to select a boot device....
Now, ever since I set up Windows 8 on the Boot Camp partition and paired the keyboard/mouse/trackpad to Windows, the Mac side completely ignores the keyboard/mouse/trackpad until I click a button on each.
I'm trying to keep it together but this is raging me out.
I went into Windows, immediately unpaired the 3 peripherals from windows and now use a wired keyboard/mouse with Windows (yay, desk space!), deleted the items entirely from the bluetooth panel, then booted to Mac and did the same thing. I then re-paired the devices to the OS X side andddd...no go! Still doesn't find them automatically. I am extremely upset by this and can't seem to fix it.
To summarize, my two issues are:
A. The iMac in OS X does not automatically recognize my bluetooth peripherals until I click a button on each and wait a couple seconds for them to pair.
B. I cannot hold Option to select a boot device (or choose Windows/Mac for example) because the computer doesn't recognize the keyboard until OS X boots and I press a key.
Please...for the love of god...someone help me, and stop me from formatting my entire computer over this issue.

I don't have a logitech mouse, but is it possible that the mouse is going to sleep during the reboot, and is thus unavailable when the OS is looking for it?

IMac G5 17" iSight No keyboard/mouse

Similar Messages

Maybe you are looking for