Imac g5 + 17' studio display need help please
hi i have an imacg5 the model with the isite built in, and i just got ahold of an 17 inch apple lcd studio display...ive had a real hard time looking for adapters, i bought the apple adc to dvi converter thing for 99 dollars and i have that dvi wire going into a dvi to vga adapter so i could use try to use it on my imac... it all hooks up fine but i dont receive any picture, just a black screen...the usbs work fine sumhow, i can plug in my ipod and that reads thru the moniter fine. does anyone know anyway i could fix this? thanks alot in advance.
Have you tried http://support.apple.com/kb/TS2094 ?
Also, before going to step 5 and taking a screwdriver to it, try:
Powering up with Option held down
Booting from an install DVD with C or Option held down
Booting from an install DVD into Apple Hardware Test by holding D down
Similar Messages
-
After my iphone4S update to 7.0.6, it have a problem that keep searching network then no service show on display. Can't call. I have try check sim card, reset network settings, and restore my iphone. Still not working at all. Need help please.Urgent.TQ
Izit software or hardware? Confuse:(
Only can use wifi now.
Any way thanks guys for ur suggestion:) amishcake and simes -
How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please. Thanks
Si vous avez utilisé la commande Save As Template depuis Pages, il y a forcément un dossier
iWork > Pages
contenant Templates > My Templates
comme il y a un dossier
iWork > Numbers
contenant Templates > My Templates
Depuis le Finder, tapez cmd + f
puis configurez la recherche comme sur cette recopie d'écran.
puis lancez la recherche.
Ainsi, vous allez trouver vos modèles personnalisés dans leur dossier.
Chez moi, il y en a une kyrielle en dehors des dossiers standards parce que je renomme wxcvb.template quasiment tous mes documents Pages et wxcvb.nmbtemplate à peu près tous mes documents Numbers.
Ainsi, quand je travaille sur un document, je ne suis pas ralenti par Autosave.
Désolé mais je ne répondrai plus avant demain.
Pour moi il est temps de dormir.
Yvan KOENIG (VALLAURIS, France) mercredi 23 janvier 2011 22:39:28
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community -
New Itunes is not working because my imac is 10.6.8 need help ?
New Itunes is not working because my imac is 10.6.8 need help ....
Because you require Lion to run it. You should not have installed it.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase a redemption code at the Online Apple Store: OS X Mountain Lion. Mountain Lion is $19.99 plus tax. Use the code to redeem a download of Mountain Lion from the App Store. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mountain Lion - System Requirements
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later.
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model
Identifier 5,1 or later.
3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later.
4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later.
5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later.
6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later.
7. Xserve (Early 2009) - Model Identifier 3,1 or later.
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table - RoaringApps.
Upgrading to Yosemite
You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
Upgrading to Yosemite
To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mavericks/Yosemite- System Requirements
Macs that can be upgraded to OS X Yosemite
1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table - RoaringApps. -
My Ipad is disabled by wrong password and I have tried to reset and restore a few times with no success. Now I-tunes won't even recognize the I-pad in recovery mode. I need help please.
If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
IMac G5 won't bootup, need help, Cap't J is in trouble!
Alright, Cap't J is in trouble, needs a commander.
My iMac G5 won't bootup.
I can hear the fans loud.
need help please!Have you tried http://support.apple.com/kb/TS2094 ?
Also, before going to step 5 and taking a screwdriver to it, try:
Powering up with Option held down
Booting from an install DVD with C or Option held down
Booting from an install DVD into Apple Hardware Test by holding D down -
I am trying like **** to download itunes 10.6.3 (64 bit - Windows 7) and I keep getting "the installer was interrupted before the requested operations for iTunes could be completed. Your systems has not been modified." I NEED HELP, PLEASE!
I got it figured out myself... yaaaaay for me!
-
Bought a new macbook and want to manually manage music onto my iphone 4s (as it is already full of music from old windows laptop) but when i click 'manually manage' and then 'apply' i get the message saying it will erase everything already on there. Need help please!
Before you sync your iPhone make sure that all the music that was synced to your phonereviously has been copied to your iTunes on the new MacBook Pro. Then when you connect your phone you will be able to either sync all music or select only those playlists that you want on the phone.
-
Hi i need help please i been playing clash of clans over 13 months. And today o realise what someone using my game Centra. Someone playing on my game Clash of Clans. I been change my Apple ID password, email, but doesn't work. Then I playing game I can see what someone else trying connecting to my game And I don't know what to do.So if you can help me please? I don't wanna lose my game.
Contact iTunes
Contact iTunes -
Hi i need help please i been playing clash of clans over 13 months. And today o realise what someone using my game Centra. Someone playing on my game Clash of Clans. I been change my Apple ID password, email, but doesn't work. When I playing game I can see what someone else trying connecting to my game And I don't know what to do.So if you can help me please? I don't wanna lose my game.
Hello Vaidas Vaidas,
It sounds like you are noticing someone else is accessing your Clash of Clans data by playing the game and you have tried to reset your Apple ID password. If you are following the steps outlined in this article:
Apple ID: Changing your password
http://support.apple.com/kb/ht5624
What is preventing you from changing your password? Any error messages or prompts?
Thank you for using Apple Support Communities.
All the best,
Sterling -
i dont know how i got my photos to my ipod touch from my pc and now i wanna delete them but couldn't. so need help. please let me know.
To turn off auto sync - launch iTunes and go to Edit>Preferences>Devices - check the box at the bottom that says - Prevent iPod, iPhones and iPads from syncing automatically. Click OK and then quit iTunes.
Connect your iDevice to your PC.
Launch iTunes,
Click on the device name on the left side of the iTunes Window.
Click on the Photos Tab in the iTunes window on the right.
Untick all of the photos or albums that you want to remove.
Click on Apply in the lower right corner of iTunes
If you untick or uncheck the Sync Photos heading and then click Apply it will remove all of the photos from the device when it syncs. In this screenshot - I have only certain albums and events selected to sync. -
I just switched from Outlook to Mail and now the sent messages are not being displayed. Help, please.
Back up all data. Rebuild the mailbox.
-
My iPhone 6 can't find my macbook pro on the airdrop list, although everything is in place, bluetooth, wi fi gets, need help please ?
Dear Niel, thank you but my mac is (MacBook Pro (Retina, 15-inch, Early 2013).
and i can send from it to my iPhone , but not vice versa -
After many months of non-use, when I tried to open Photoshop CS4 Extended, I got an error message 148.3. "Licensing for this product has stopped working." I need help, please.
Error "Licensing has stopped working" | Windows
Error "Licensing has stopped working" | Mac OS
Mylenium -
I need help please I keep getting error messega 21 when i try uploading my iPhone 4 s!!!!!!!!! omg some one please tell me if and how to fix this please. thank you!!!
Hopefully this link will help you: http://support.apple.com/kb/HT2109
Maybe you are looking for
-
Navigation bar too wide for template graphic after creating new page
I want to stick within the templates, but I have a lot of pages and don't want them all in the nav bar. When I flagged a page to keep it out of the NAV bar, the NAV bar get messed up - not properly displaying at the edge of the template, like it made
-
Purchased music will no longer import to ipod
hi, all: after downloading the latest ipod update about september 11 (i think), we have been unable to import music purchased from itunes into ipod. the music plays in itunes; itunes keeps telling us to update the ipod, but that has been updated with
-
Enemy Territory on Nov 2007 macbook (Black)
so i have a macbook i just got for christmas and im trying to play Enemy Territory on it with the most recent patchs etc. when i open up the game all i hear is a constant sound that keeps looping and gets really annoying. it never did this for any ot
-
How do I add a delay to boot time?
Win 8.1 boots too quickly to be able to get into safe mode, sometimes even to get into BIOS. I unchecked the faststart under the power settings. Is there anyplace I can put in a time delay before the windows boot process starts ? Bill Riggs
-
Quicktime player 10.1 doesn't read film .mov
quicktime player 10.1 doesn't read film .mov . for information I used 10.0 version before and it worked well. OS 10.7.5 doesn't accept previous quicktime player version. What can I do