IMac G5 20" Hard Drive Replacement?
Hi all,
My brother has a 20" iMac G5 with a Maxtor HDD. It's a couple of years old and he doesn't have an AppleCare on it. The hard drive has been acting a little funny lately and I've had some bad experience with Maxtor in the past so I'm interested in replacing the hard drive for him. We're upgrading him to Leopard this weekend so there's not much of a better time to do it than then.
Anyway, I have a couple of 320 GB SATA 2 WD drives that used to be in my Mac Pro's RAID which I'm not using. Most every other computer I've ever seen will let you drop a SATA 2 drive in place of a SATA 1 drive so I'm assuming I can do the same with his iMac. Does anyone have any experience with this? I found directions already on how to do the swap - I'm just wanting to double check that I'm not going to blow something up by sticking a SATA 2 drive in this revision of iMac.
DaddyPayCheck,
I have a 20" iMAC PowerPC G5 amd I want to replace the hard drive. Do you have any recommendations on a good drive to consider? I am going to upgrade to either 500 GB or 750 GB. When I order the drive to I need to purchase anything additional in order to set the jumper setting to 1.5?
I have been considering Seagate drives so far.
Thanks
Kball1
Similar Messages
-
My computer is part of the iMac 1TB Seagate Hard Drive replacement program. What is the best external modem to use in order to back up my files prior to me dropping off my computer.
As Babowa says, get an external disk. You should have one for normal backups anyway.
Actually, I'm a strong fan of having multiple backups. 3 copies including the original, 2 different backup formats, and 1 backup off-site.
And when you have your iMac in for service, if you have just 1 backup at that point in time you have just 1 copy of your data. I get paranoid about my data.
But if you are just making 1 backup, I would use SuperDuper (free for a full clone, and extremely good software, as is Carbon Copy Cloner, but it is not free anymore).
And then I would "Boot" from the clone, to make sure it was a good clone.
Booted from the clone, I would then use Applications -> Utilities -> Disk Utility to zero the original disk, as suggested by Babowa, so that when they replace the disk, the original disk containing your data is not in the hands of strangers. A single pass of zeros is more than good enough as an erase, as the chances are no one is going to spend the money needed to try and read the erased data. It is not like you have any super secret data, just stuff you do not want the casual data theif to get. You will find the zeroing options under Disk Utility -> Erase -> Security Options
Just make sure you actually boot from your clone before erasing your original. And if you are paranoid like me, make 2 backups, then erase the original :-) -
IMac 1TB Seagate Hard Drive Replacement Program - how long does it take?
I started a new thread for this issue since the original thread has degenerated into a rant. I just got my love letter from Apple informing me that my new 27" iMac has the bad drive. I backup to an external USB drive using Time Machine, and I am planning to have my nearest Apple store replace the drive sometime in the next few weeks.
I am posting to ask if anyone has yet contacted Apple about this issue? I am curious how long it takes to swap the drives. Can it be done while you wait? Does Apple have any ability to clone the old drive's data to the new? Has anyone been able to arrange for in-home service as mentioned in the original thread?
Please don't use this new thread to rant about the problem. If you need to let off steam, please post to the original thread.
Thanks for the help!Greetings from an apple mac newbie in UK. On the one hand, after getting the email today I was disappointed to find my brand new shiny mac 21.5 might have a fault on hard drive, on the other at least apple points it out! But doubly frustrating for someone that has just taken the plunge and converted from pc/microsoft rubbish after two decades and still finding my feet in macworld....and who upgraded to OS X lion this past weekend without a hitch (nervous as an XP SP2/SP3 veteran)...and had to pay for Lion because I bought my imac just a week to early to qualify for free Lion upgrade.
My decision on Hard drive is to wait and see, firstly to guage experience of apple turn around times/customer experience etc in UK and secondly because I would like to understand what kind of percentage of the seagate drives are faulty...I am backing up with time machine, the machine is under warranty and applecare too, so maybe no need to rush, there's a year yet at least.
Another consideration for me is that I bought my mac with dual drives - the 1TB Harddrive for data and the 256SSD for OSX/apps...idea was to keep the programs on the ssd as it is fastest and is best with less rewrites, the conventional hard drive then used for big data stuff like docs, music and photos. This needed a bit of custom set up involving apple support to get the right things on the right drives, so am in no hurry to muck that up!
PS does anyone else in the UK have my mac dual drive configuration...? -
Tried setting login password onto iMac after it returned from Seagate exchange hard drive. Upgraded from leopard, snow leopard and currently upgraded to Lion, so as to have iCloud.Typed my name in as administrator and waited for a space to appear to type in password and confirm it. No space appeared so I shut that window down. Put iMac to sleep and when I returned and tried to access computer, it asks for a password which I did not put in! Now I'm stuffed. Cannot get into computer at all. Help appreciated. I'm not a techno wizard.
Welcome to the Apple Support Communities
Reset the password > https://discussions.apple.com/docs/DOC-4101 -
Basically my iMac just crashed and I searched on Google for replacing my hard drive and came across the iMac 1TB Seagate Hard Drive Replacement Program at http://www.apple.com/support/imac-harddrive/
Which is that Apple is asking all 2009 - 2011 iMac users to return their iMac for a free hard drive replacement because it currently has a fault in it. After entering in my serial number, I see that my iMac is elegible for a replacement.
I did register my iMac with Apple, but I didn't receive any email about this program and I lost all my recent data because of the faulty hard drive. I never had an issue before with the drive so this just happened out of the blue.
Is it possible to get a free data recovery from Apple for this? I find that it was a lack of communication that I lost most of my data.I completely understand that it's my responsibility to back up my data but I have it set to every 2nd month, not on a weekly or daily basis to back up the data.
Apple might not be in data recovery business but could they not acquire a third party to do this?
This is what happened:
It was on sleep overnight and when I tried waking it, it was lagging badly. So I shut it down and restarted it. I phoned into techincal support to find out whats wrong, but they were giving me advice to reset the params etc. But i think it made it worse because it didnt want to get passed the white start up screen.
So I phoned back to ask if it's a usual issue with my version of iMac and the man replied that it isn't common and that I should run the disk utility to check the hard drives health.
I installed Mountain Lion on a USB and started the disk utility. Then it highlighted in red that it's a hardware fault and cannot be repaired by the disk utility. Therefore the hard drive has a serious fault with it.
That's when I Google'd for a replacement drive and came across the program. The techincal guy didn't even tell me about it or anything.
If I knew about this sooner, I would have taken it in for a replacement. -
i have 3tb seagate goflex external hard drive.its brand new in package.i took it out of case and deleted partitions that were created by manufacturer.so now i have 2800 gigs.its formatted ntfs.will it work for late 2010 27" imac internal hard drive replacement.i found a apple repair place that will charge me 50$ to swap drives for me assuming i have the drive.i will have to install leopard myself at this price.i dont want to have to pay for anything other than the swap.will this hard drive work with this format or do i need to format it differently.
Hello
formatted ntfs
NTFS format not work on mac system , need to be formatted as Extended Mac os Journaled format and partition table need to be GUID
how to do that in video
HTH
Pierre -
I had a new hard drive replaced in my imac. Now my 1st generation apple TV does not appear under devices in itunes. How do I get my apple tv to connect to my computer? My OS is 10.6.8
Welcome to the Apple Community.
Navigate to Settings > Computers > Your Library on the Apple TV, you may be told you will lose all synced content, but you can't doing anything abouty this, you won't lose any purchased content that has yet to be transferred. Then select Settings > Computers > Connect To iTunes, note the passcode that appears on screen, click on the device in iTunes and enter the passcode when prompted. -
Error message when I try to print: unsupported document-format"application/vnd.cups-command". I recently had my hard drive replaced in my early 2010 21" iMac. Anyone know anything about this? Thanks in advance.
What system are you running? Have you tried going to the Canon website to download and install the latest drivers for that model?
Are you running Time Machine? -
Incredibly my rarely used 2011 Imac Hard Drive is toast. I saw they have a replacement program but even though it is way too soon for a hard drive OF QUALITY to be going out so soon as mine - mine is not included in the replacement program.
Which I have a problem with - how odd it is that they had enough trouble with these computers/hard drives to do a replacement program but mine which did the same thing, expired way too soon isn't covered. I've not had use of the computer for 4 months while I tried to fix the problem so it lasted a little over a year.
Anyway I need to know what to do to try to replace it myself as i haven't the funds to take it to Apple for repair. Plus, Apple Computers and me are history I will never buy another after spending over $1200 for a computer that's nothing more than a very large paperweight right now.
How do I know what size and all that?
I may not be able to afford even that so more than likely this is going to be a very nice looking worthless computer going to the landfill.I Am leaning more toward Kappy's comments, based on your attitude and comments, but I will ask some questions and add some useful comments as I am in a somewhat charitable mood.
Do you still have AppleCare on this iMac?
From your rather blunt comments I assume no, but have to ask anyhow.
This is why I recommend purchasing and registering for 3- year extended AppleCare.
Because of the nature of the newer iMac designs, hardware failure seems more likely or commonplace occurrence. I believe it's more of a excessive heat related issue than anything else despite what Apple has qualified as "normal" operating temps for these iMac models.
Check out the iFixit home site and search for iMac disassembly or tear/take down. Or search for iMac hard drive replacement on the site.
Another option is for you to purchase an external FireWire 400/800 drive as your new boot drive.
Running your iMac from a FW800 drive will be about as fast as running it from the iMac's Internal drive.
If you can afford it get as large a drive as you can afford.
And just for your info, while hard drives can last for years without issue they will go bad, eventually.
Some drives crash and burn faster than others. Especiallly true of the notebook style drives that Apple installs into the newer design iMac. With hard drives, the question is not if they will fail, but when will they fail.
If you had all of your data backed up to an extra, external drive or optical discs to begin with, you wouldn't be so upset about your internal drive dying as your data still would've been intact on another drive or discs in the first place.
I Always advocate for having some sort of backup strategy for your important data in the event of hardware or hard drive storage failure. -
My iMac Seagate 1T hard drive crashed. I replaced it with a Western Digital 1T hard drive. Where can I get the Lion OS?
The iMac comes up with a ? in a folder, even after starting with Option/Command/R keys pressed.
Please help.Call Apple to purchase replacement discs or order a copy of Snow Leopard from Apple's Online Store. Follow these instructions:
Drive Preparation and Install Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. When completed quit DU and return to the installer. Install Snow Leopard. Once you boot from Snow Leopard you should open Software Update and install all the available updates required. After you complete this and restart the computer open the App Store application in the Dock or Applications folder.
8. Sign into the App Store with your Apple ID and password. Purchase and download Lion.
9. After Lion's installer downloads, install Lion. -
Replacing my iMac 1TB Seagate Hard Drive
I have to replace my iMac 1TB Seagate Hard Drive. I need to use Time Machine to restore my Mac- anyone have a step by step procedure to complete this?
Welcome to the Apple Support Communities
When you get your Mac after Apple has replaced its hard disk, they can give it to you with a blank hard disk or with Lion installed. I recommend you to make a clone with Carbon Copy Cloner instead of the Time Machine backup. It will make shorter the process of reinstalling everything again.
If it has got Lion installed:
1. Press Command and R keys while your Mac is starting and open Disk Utility.
2. Select Macintosh HD in the sidebar and go to Restore tab.
3. Drag your external disk to Destination box and press Restore.
4. When the restore finishes, restart your Mac.
If the hard disk is blank, it depends if you bought your Mac with Snow Leopard or Lion. If you bought it with Lion, do the same but pressing Command, Option and R keys. If you bought it with Snow Leopard:
1. Insert the OS X disc and press C key when your Mac starts.
2. Go to Utilities > Disk Utility and select Macintosh HD in the sidebar.
3. Go to Restore tab, drag the external disk to Destination box and press Restore -
Just got back my iMac with a brand new replacement hard drive through the iMac 1 TB Seagate Hard Drive Replacement Program. With only apps installed, no files and fonts added, the hard drive already shows permission problems. Is that normal? The replacement hard drive is a Seagate again, ST31000528BAS. Do people like their replacement hard drive?
Just now looking at these... Last recall 2009 MacbookPro Video issues, I waited 4 years and it took 4 trips to apple store with video of the machine problems... Days and months past, finally with stern discussion with manager, got resolved. Now Drive recall on work machine... better take advantage now. IF IT AIN'T BROKE DON'T FIX IT!
Should have thought of it... Have TM full back up... (will look into clone next time, now that I see this). Take in 27iMac running 10.6.8, 5-7 days, what a joke, my boss will be happy to pay for a week without working. Finally get, "if you have TM back up, 3 days." Get machine back with 10.6.3, hit the R recovery, click TM back up, runs for 2 hours, reboots, looks great. Box up take back to office... update to install - OH CRAP, still running 10.6.3. Updates crash with error on install, BUG PROBELM, nothing runs.
Call Apple... after hours, tells me to boot using 10.6.2 disk, wipe, reinstall OS, udate to 10.6.8, THEN do the restore. GREAT! Only thing 10.6.2 DVD won't read... now back on phone... take back to the store, Genius says, "Oh, can't boot a newer system w/ old disk, that's why it won't read." PROMISES it'll be fixed, if you leave it over night... GREAT!
Pick up next day, supposedly, booted to disk, wiped drive, reinstalled, updated to 10.6.8 and did the RIGHT restore... Looks GREAT... apps run and 10.6.8 OS. Back to the office... CRAP!! not running right... fonts messed up, drop box app needs new install, cocktail needs upgrade, Fetch not working, memorized paths gone... back ups locked out of permissions... ***!!
4 hours on phone with apple and still not solved. Evidently... either different account names caused problems... and/or they never restored personal "settings". Seems there are 3 ways to restor... Running Migration Assistant, Restoring after they load a new OS... or NOW WAITING for them to send me a bootable 10.6.3 disk and then boot from disk, w/o installing OS and doing a restore from TM.
Can begin to make enough stink!! So now can't back up without doing a full 400 GB back up and possibly destroying any good back ups... can't work, liek having hands tied behind back. WAITING for solution! TICKED OFF!!! -
What now? Hard drive replaced 10 days ago but now iMac won't go beyond the grey screen.
Hard drive replaced after inability to get beyond grey, sometimes blue, screen. It's been working fine for the past ten days but now it's stuck at the grey screen. After 3 or 4 minutes, it'll restart itself and the whole cycle begins again. Did a Hardware Test from the disc. First time it appeared to have passed but again not getting beyond the grey screen, did another. This time it froze half way through. Any suggestions? This is an iMac 24", 2009 with large architectural programs installed (Vectorworks).
Not sure what to suggest at this point. I don't think a smc and pram reset will do anything useful for this case but you could give it a try as a desperation move.
If the machine could stay up long enough I would try to make a backup. If not, at least try to copy off that Vectorworks stuff on to a drive. Maybe it will stay up long enough to get just that.
By the way, if you had the AHT boot disk you should also have the installer disk. If you boot from it you could try to run Disk Utility from there to try to repair the boot drive. just in case it's only a problem of a corrupt disk. -
Hi there, I have lost imovie on my iMac after taking it to the shop to get the hard drive replaced. Unfortunately I do not have any of the start up discs. How do I get imovie back on my computer?
See this thread:
https://discussions.apple.com/message/20635110#20635110 -
As I stated my late 2009 iMac 27 inch hard drive failed and is being replaced.. I am being charged as machine does not qualify for the call back program..call backs are on 2011 machines.. However i am in shock that my segate internal iMac hard drive failed in less than two years.. are there others with similar issue? Also when I get machine back will new hard drive be stable .. How do I make sure my working environment is reliable.. I have all my data and work backed up and will be able to rebuild my system but I really do not want to have to go through this down the line again.
Just to update everyone and maybe help people down the road .... It has been a week of **** .... I may have finally solved a problem that I have seen a ton of people in all different types of discussions around the world having trouble with ...... I am going to upload some pictures of what I was getting in the beginning and it came out of no where .... I had the random pixel problem with my display and to make a long story short I came across an article two days ago regarding internal temperatures and fan speed ...... I kept reading about apples approach which is not the point ..... More importantly I dug deeper into temperature control and fan settings .... I discovered all kinds of software and there is only one in my eyes that can help anyone dealing with this display problem .... I will be honest, I do not have the money right now for anything extra and am barely getting by and that is why I kept at it ... I figured keep trying different things because a repair is out of the question ... http://www.crystalidea.com/macs-fan-control - This program has solved my problem - I get to adjust three internal temperatures inside my Imac and slowly but surely as the temperatures remained constant the display is fine .... Like new again .... I cant believe it ..... Turns out the ATI Radeon HD 4850 512 MB graphics card gets very hot causing it to not do what it is supposed to ..... Anyone that has any questions do not hesitate to contact me ...... I am going to upload some pics .... They are not that clear but if you are going through this you will recognize the images for sure - There was so many more variations but this should help out - Thanks to everyone that takes the time out to help people on this support site .... I want to send a shout out to The Art Of Sound .... He is the most knowledgeable Apple person I have ever come across and I am an Apple user for 20+ years
a to
Maybe you are looking for
-
Centro HotSync with Palm V6.2.2 Locks up at DATE BOOK - no calendar records on Palm Desk Top
First let me say that I hate the new version 6.2.2 Palm Desktop and the ongoing problems I have doing a hotsync. Today, I had to restart my computer as I "uninstalled" a non related program from my computer. When I restarted my computer and opened
-
My problem started after installing "smartsync app" which is supposed to sync my phone with the profilepage photos of my friends in facebook. All my apps crashed after using them for awhile.While using my apps, they will black out after a little whil
-
Management Point will not install
Hi, I am using Windows Server 2012, SQL 2012 with cu2 and SCCM 2012 sp1, and I have one Primary site which will host all site roles. I am trying to install the Management Point (using HTTPS for client connections) but it fails. I did have the SCCM 20
-
Please Help, Getting Desperate...
I have the old 15-GB ipod that I got for a gift 2 years ago. A few days ago I was playing it using a car adaptor while charging it as well. Out of nowhere my ipod stops, freezes, then turns off showing only a line on the LCD screen for about 30 minut
-
Notification User Difine field
Hi, Would like to add user define field in M2 type notification, which customer exit is suitable for me? Or else...?? Pls advice.. KB