IMac G5 20" svideo/composite video out

I have an iMac G5 1.8 MHz 20" which I wish to connect to my TV, I believe I need an adapter for the built-in display connector but can't seem to find the correct part for sale anywhere. Can anyone provide any pointers, thanks - John.
iMac G5 20 Mac OS X (10.4.6)

John, welcome to the discussions!
Your iMac has a mini VGA port on it and you will need the Apple Video Adapter which runs $19.

Similar Messages

Composite video out to TV

This may be a question easily answered but I don't pretend to have any knowledge in this area.
With my G5 iMac can I get a composite video out to plug it into my 42" Sony HDTV and if I did what sort of quality would it be? As in would it be High Definition and wide screen?
Any helpful advice? Thanks!

Composite is generally the worst video-output you can get.
Quality is about that of a good S-VHS recorder, with colours that bleed over into eachother at the edges. Magnified on a 42" TV, this wouldn't look good, with red bleeding a lot and shimmers across bright colours.
It's better to use the S-VHS-output that's, I believe, also on the video-out adapter that Apple sells.
Some HDTV-capable TVs come with a VGA-input. If yours does too, you'd be better off buying the VGA-adapter instead. This will give you a higher resolution than possible with the Video-out adapter and no (or unnoticably little) colour bleed. The VGA-adapter is capable of supplying atleast 720p HDTV-images, but not in widescreen.
Currently, Apple has no HDTV-capable output system, although the Mac's videochip itself is capable of outputting it.

Ziio: Composite video out?

In the initial specsheets released for the Ziio 7" a composite video out was mentioned. It seems that the current specs does not mention this?
Is composite video out present on current Ziio's?
/lars

Thanks for your quick reply.
I wanted to use the Ziio to dri've my two rear-seat screens in my can (using composite as HDMI is not supported)
/lars

Composite video out on tx2520ej

I've got an HP tx2520ej laptop with Radeon HD3200 chipset and s-video out. I want to connect it to the TV by using a composite video signal. Can i get composite signal from the s-video out port like shown on this pic, or the mobility radeon chipsets does not support this option?
http://www.ixbt.com/video2/images/radeon-tv-out/s-video7.jpg
thanks

This is automatically handled by the aur package acpi-eeepc-generic. If OP does not have that one installed, I suggest he/she tries installing and configuring this package first. Fn+F5 should automagically toggle the external monitor.

?? I thought there was a mac-mini, DVI to RCA /S-video adapter. If no, can I get 37.5mhz on display to composite video out?a composite video

?? I thought there was a mac-mini, DVI to RCA /S-video adapter. If not can display be set to 37,5 hertz then my crt can accept composite video. Thanks.

12. Can I output via Mini DisplayPort to an RCA or S-Video connection?
No. The Mini DIsplayPort connector allows output to Mini DisplayPort, DisplayPort, VGA, DVI, and HDMI connections when using the proper cables and adapters. However, output to RCA, Component, or S-Video connections is not supported.
But see:
https://discussions.apple.com/message/8718087#8718087
https://discussions.apple.com/message/9462900#9462900

Composite video out. Why can't I sync some movies? What's the best res?

I'm guessing because I ripped some movies in a higher definition for use with the iPad and iPhone 4 I cannot add those movies to my iPod Classic 80GB.
Is there a good compromise in quality so I don't have to perform multiple rips? Better yet, is there a way I can add HiDef video to the iPod and play via the Apple Composite Video connector?
Given the relatively small storage space on the iPad and iPhone when compared to a iPod Classic it makes sense that the iPod would be a better storage and transport method for larger video files.
Thanks in advance.

FIXED IT. For those of you who may be having the same problem, this is what I eventually had to do.
1. erase my entire ipod
2. put it all back on there
That seems simple but it also seems pointless. I do not know why I had to do this because I had already downlodaded the newest version of itunes, put everything on the cloud, and then downloaded everything back off of the cloud.
But for some reason I had to go in and
1. put things from cloud back into library
2. erase ipod (which had already had cloud info put back on it)
3. transfer all library data straight from library to ipod (without use of cloud this time)
For some reason this made my video show up on my ipod and not just my itunes.

Recieve signals from WLAN NIC, decode and produce video signal from VGA or Composite Video out

i am trying to broadcast some MPEG4 video messages over a WLAN and display them on TVs and LCDs. i need to develope an interface between the wireless NIC and the display modoule. this interface has to be able to collect the information, decode the information to reproduce a video signal on a VGA socket or a normal TV composite video socket. does anyone has any ideas how i can achieve this?? please help me!! thank you!

Hi,
Assuming that you are trying to use LabVIEW to achieve this, I believe that it will be simplest if your wireless NIC exposes an ActiveX interface that LabVIEW can use.
Regards,
Ankita

Tecra 8000 composite video out

I am trying to direct video output from my tecra 8000 via the yellow video composite jack at the back of the unit. I thought it was as simple as pluging in both sides of an RCA jack (one end to the video input of a VCR and the other end into the Tecra video jack).
I get NOTHING on the screen. What am I doing wrong?
Thanks in advance

I had already tried that with no results. There is also a 7 pin canon connector on the side of the laptop. This was provided with units that came with a DVD-ROM. Normally there would be a modem port there. I believe this round connector is for "S-Video" output. I was going to buy a cable for this, but like the composite video output, I'm afraid there is no video signal going to either port. The manual just talks about the port on the back of the unit and it doesn't say anything other than placing an RCA cable between it and a TV or VCR that has the same input port. It's really neither here nor there if I can get this to work, I'm just a little stumped is all.

EPG/ Overlay on Composite video out

I know there was an issue originally with the DTR-T1000 youview box firmware where the EPG/overlay would not be visible on the the composite video (YELLOW) output if an HDMI cable was connected at the sametime, but I thought that had been fixed with the latest firmware.
I'm fairly certain I confirmed that the issue had been fixed myself, however I am finding now that the issue is either back or still there, either way I cannot get the EPG to show on the composite video output if the HDMI cable is connected. If I disconnect the HDMI it works fine.
Any ideas?
Solved!
Go to Solution.

It works fine but the HDMI tv must be turned off or on standby for the second modulated tv to view the menu. If the hdmi tv is on then you can change channels using IR senders on the second tv but can't see the menu. Hope this helps.
Ben

HT3413 How can I get composite video out of the 13" early/mid 2009 MacBook?

OK, the Mini-DVI - DVI Adapter "works with" the 13-inch, Early and Mid 2009 MacBooks.
But can it combine with a DVI to S-video and composite adapter so I can play video from my MacBook (one of the above) to my TV (composite input)?
It is stated in many places that the Mini-DVI to S-video and composite adapter doesn't "work with" these models, and I've proven that's the case.
But I can't find anywhere that explains why, or says more than "works with," or just tells me how I could get any external video from my MacBook other than VGA which is useless to me as far as I can tell.
Thanks for any help!

Five ways to eject a stuck CD or DVD from the optical drive
Ejecting the stuck disc can usually be done in one of the following ways:
1. Restart the computer and after the chime press and hold down the left mouse button until the disc ejects.
2. Press the Eject button on your keyboard.
3. Click on the Eject button in the menubar.
4. Press COMMAND-E.
5. If none of the above work try this: Open the Terminal application in your Utilities folder. At the prompt enter or paste the following:
/usr/bin/drutil eject
If this fails then try this:
Boot the computer into Single-user Mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.

Power Mac Mirror Door DVI or ADC to SINGLE RCA VIDEO OUT to a TV...adapter?

I have a Mirror Door G4 tower that I would like to use as a media center, with an old(er) Magnavox 19" television that only has the single yellow VIDEO IN jack, and the red and white audio L and R. Is there a converter cable that is similar to the one I used to use with my old G4 Powerbook which took the mini DVI and turned it into either composite video out? (I think it was Mini DVI, maybe ADC, whatever that little square video out on the Powerbook G4). I am prepared for low-res results, mostly just want to look at the itunes window and occasionally view utube clips or DVDs.
Also, does the G4 take the original Airport card (not the extreme), and if so does it need a separate antenna the way some G5s do?
And finally should I get good results with a Bluetooth dongle plugged into a USB port on the rear of the G4 when connecting a white Apple wireless keyboard?
Some of these answers will of course sort themselves out with experimentation, but any tips or experience in doing these things would be greatly appreciated.
Thanks, m.

I expect the weasel-words in Apple's description are there to be sure that whatever Video card you choose, the card does actually provide the signals needed. These are the VGA-equivalent signals around the Bar at one end of the connector. That gets you Red, Blue, Green+Luminosity, H-Sync and V-Sync. Those signals in combination are all that is needed to build S-Video or Yellow-RCA composite video On-the-Fly (not buffered).
The signals can be sliced and diced to get slightly different versions of Analog Video using adapters built around the SKART interface. There is a cheap one-chip wonder converter used in lots of converters, also loosely called SKART.
http://en.wikipedia.org/wiki/SKART
This does NOT do conversion to Digital Video, DVI, or HDMI when starting from VGA. That kind of converter has memory and scanning hardware that pushes the cost up higher than the price of an display card.
Message was edited by: Grant Bennet-Alder

[T420] VGA to S-video or composite video

I want to connect a T420 to an older TV. Can I use this VGA to s-video/composite adapter? The website says:
"Your video card MUST be able to support s-Video or Composite out through it's VGA port. This is known as a TV out function. If you don't know if your video card can do this, then call the card manufacturer and ask them "Does my video card support S-Video or Composite Video out through its VGA port?""
So, does the video card in the T420 (Intel HD 3000) support S-Video or Composite Video out (more importantly composite video) through its VGA port?
W520 i7-2720QM | 32 GB RAM 1333 MHz | FHD 1920x1080 | Quadro 1000M | Windows 7 & Ubuntu 14.04
Crucial M500 480GB mSATA + 2 x 1 TB Hitachi Travelstar 7200 rpm | BIOS 1.38

Hi biznatch!
The T420 does not support s-Video or Composite out through it's VGA port. You need an active VGA converter box.
Hope this helps!
I don't work for Lenovo. I'm a crazy volunteer!

ATI Radeon HD 4870 Composite Video?

ATI's spec sheet on the Radeon HD 4870 states that it can provide an analog composite video out. Is this feature enabled on the version that can be optioned on the Mac Pro, and if so with what adapters?

apples videoadapter does not work with this graphiccard
http://support.apple.com/kb/HT2809

Video Out on iPhone 4

I have Apples audio and video out cable adapter. One end plugs into the dock connector, the other end has left and right audio out, and composite video out.
When I use this cable adapter with my iPod, all videos play perfectly on any television set. However, when I use the same cable on my iPhone 4 I get audio but no video.
I suspect that Apple has crippled the video out for some reason. Please tell me I'm wrong.
http://www.iphone-tips-and-advice.com/iphone-video-out.html
I am simply trying to watch NASA TV using my iPhone. I used to get NASA TV from DirecTV, but you must now have HD DirecTV to get NASA TV. ( we still get 100 channels of infomercials however.)

I have a bad habit of asking questions that no one knows the answer to.
Do I get a prize?

Video Out and iPod

If you have one of those 30pin to RCA stereo & composite video cables. Will the iPod app output a video image of the current song album art, or will the app only do video out for actually watching videos?
I've got an interface I was going to install that makes me be able to control my iPod playback on my iPhone using my car's native stereo controls (it is done using the CD Changer port on the cars stereo). But my car also has RCA input jacks for composite video and audio. I love the MotionX GPS app and think it would be cool to see the GPS screen on my iPhone on my car's screen. So I was thinking of just using the RCA jacks combined with an RF or bluetooth remote control. But if I can't see any song information via the composite video out, then forget it.

i believe the video out would only work when playing videos and nothing else. this is because it would be impossible to control the iPhone from your car stereo unless they created a complete interface to work with the iPhone, and the only way to do that would be to get code from apple and i doubt that will ever happen...

IMac G5 20" svideo/composite video out

Similar Messages

Maybe you are looking for