IMac G5 having hard time

My dad's iMac G5 20', 2.1 GHZ, 1.5 GB of RAM, 500 GB HD is running Mac OS X 10.4.11, and has all the latest software, but recently, even before the update, it has been running slowly and freezes about every 2 hours. I cleaned up the computer using Onyx, I checked the hard drive space, has 333.1 GBs left, so no problem there. Any ideas?

Perhaps you might check and see if his computer is covered under Apple's Repair extension programs, it sounds as if he might have a power supply problem.

Similar Messages

Hi im using a mac book pro, im having hard time viewing vidoes on Facebook, it just happen few hours ago, how can i fix it? thanks

hi im using a mac book pro, im having hard time viewing vidoes on Facebook, it just happen few hours ago, how can i fix it? thanks

Hello Terrychelle,
Thank you for using Apple Support Communities!
If the issue is to do with Safari, then you may need to reset it.
Safari 6 (OS X Mountain Lion): Reset Safari
http://support.apple.com/kb/ph11914
Regards,
Sterling

I am having hard time in redeem my iTunes gift card that I just got

I am having hard time in redeem my gift card I just got

That is very vague.
Perhaps if you were to explain the problem, then someone could help.

HT5319 having hard time upgrading and deleting the old games

I am having hard time upgrading deleting my the old games on my ipad 2

You'll want to describe what you've tried here, and what has happened; any error messages or related details you've seen would be useful, too.
To delete an app on iOS, hold your finger on an icon until all of the icons on the iOS display start jiggling, and then press on the red Ⓧ. That deletes that app from that device.
You can also drag the apps from display page to display page in jiggle mode, but don't press the Ⓧ while you're doing that relocation.
Press the "home" button on the front of the iOS device to exit jiggle mode.
You can also delete the app from iTunes, though I don't have any experience with that on Microsoft Windows 7. If you're having issues with Windows 7 and iTunes, you'll want to describe the details of what's happening.

Having hard time downloading, firefox brower

brower needs to be updated

'''''"having hard time downloading, firefox brower"'''''
Not much detail. Difficult to diagnose your problem with such limited information.
You can:
*click Help > Check for Updates on the Firefox menu
**See: https://support.mozilla.com/en-US/kb/Updating+Firefox?bl=n&s=update%20automatically
*OR download/Save the installer to your hard drive then run the installer
**Download link: http://www.mozilla.com/en-US/firefox/all.html
**See: http://support.mozilla.com/en-US/kb/Installing+Firefox
 
You have an item installed that is considered malware/spyware/adware. To see the Plugins reported with your question, click "More system details..." to the right of your original question.
*My Web Search Plugin Stub for 32-bit Windows
This type of pest is usually installed along with software you download from the internet; generally free programs, but not always. Carefully watch for "extra" items that will be installed and un-check or opt-out of them.
#You can check to see if you have any of these from [http://www.google.com/search?q=%22Fun+Web+Products%22&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:es-ES:official&client=firefox-a|"Fun Web Products"] installed:
#*Control Panel > Add or Remove Programs, click on any that you find and click "Remove": Ask.com Bar, My Search Bar, MyWay Speed Bar, My Web Search Bar, Fun Web Products Easy Installer
#*See:
#**http://www.safer-networking.com/removemywebsearch.php
#**[http://www.pchell.com/support/mywebsearch.shtml PC Hell: My Web Search Removal Instructions]
#**http://helpint.mywebsearch.com/intlinfo/help/toolhelp.jhtml#q3
#Also see: http://kb.mozillazine.org/Uninstalling_toolbars
#'''You '''MAY''' need to change a preference''' if when typing one or two words in the URL/Location/Address Bar sends you to some search page other than the one you expect. To reset your default URL/location bar search provider:
#*Enter '''about:config''' in the address/URL bar and press the Enter key
#*If you see a warning, accept it (Promise that you will be careful)
#*Filter = keyword.URL
#*Below the Filter, if keyword.URL is '''bold''', right-click on keyword.URL and choose "Reset"
#*Restart Firefox (File > Restart Firefox)
#*See: http://kb.mozillazine.org/Keyword.url
#'''You '''MAY''' need to reset your homepage''' if some search page that you do not want or expect opens when you start Firefox. Firefox can open multiple home pages. Home pages are separated by the "|" symbol.
#*See: http://support.mozilla.com/en-US/kb/How+to+set+the+home+page
 
'''Other issues that need your attention'''
The information submitted with your question indicates that you have out of date plugins with known security and stability issues that should be updated. To see the plugins submitted with your question, click "More system details..." to the right of your original question post.
*Next Generation Java Plug-in 1.6.0_22 for Mozilla browsers
#'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update the [[Java]] plugin''' to the latest version.
#*Download site: http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)
#*Also see "Manual Update" in this article: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org
#*Java Test: http://www.java.com/en/download/help/testvm.xml

HT1349 i cannot open anymore my iphone3gs. i just had it back to original setting because im having hard time sychronizing my phone to itunes. then i left my phone for about 5 hours then when i found it could not be activated, what am i gonna do with this

i cannot open anymore my iphone3gs. just had it back to its original setting because in having hard time sychronizing this one.

What specifically is the issue?

Convert SSRS dropdown MDX query to INNER JOIN w/ NONEMPTY? Having hard time with this.

I'm having an incredibly hard time with this, mostly because I'm very new with MDX.
I created a simple report (with AdventureWorksDW) whose datasource is an SSAS cube. I select a datekey from the dropdown menu, and the report displays [Measures].[Order Quantity] for that day.
The problem is that the dropdown displays every single value from the dimdate dimension. DimDate goes from 20050101 to 20201231, so the dropdown is very long.
How can I alter the SSRS-generated MDX so that it does an INNER JOIN with Fact table and only the dates shown in the dropdown are the ones where there's data in the Fact table?
Currently, the fact table only has 2 days of data (20141015, 20141016), which means that the dropdown should only display those two dates. I'm including the generated code MDX that populates the dropdown menu:
WITH MEMBER [Measures].[ParameterCaption] AS
[Dim Date].[Date Key].CURRENTMEMBER.MEMBER_CAPTION
MEMBER [Measures].[ParameterValue] AS
[Dim Date].[Date Key].CURRENTMEMBER.UNIQUENAME
MEMBER [Measures].[ParameterLevel] AS
[Dim Date].[Date Key].CURRENTMEMBER.LEVEL.ORDINAL
SELECT {[Measures].[ParameterCaption],
[Measures].[ParameterValue], [Measures].[ParameterLevel]}
ON COLUMNS , [Dim Date].[Date Key].ALLMEMBERS ON ROWS
FROM [Adventure Works cube]
Any help is appreciated.
VM

Hi vmhatup,
you can get rid of blank data using nonempty function and get rid of negative values using filter function nonempty should be inside of filter so it applies first, otherwise it is too slow.
Your statement could look like this
WITH MEMBER [Measures].[ParameterCaption] AS
[Dim Date].[Date Key].CURRENTMEMBER.MEMBER_CAPTION
MEMBER [Measures].[ParameterValue] AS
[Dim Date].[Date Key].CURRENTMEMBER.UNIQUENAME
MEMBER [Measures].[ParameterLevel] AS
[Dim Date].[Date Key].CURRENTMEMBER.LEVEL.ORDINAL
SELECT {[Measures].[ParameterCaption],
[Measures].[ParameterValue], [Measures].[ParameterLevel]}
ON COLUMNS
, filter(
nonempty([Dim Date].[Date Key].[Date Key],measures.measureName)
,measure.measurename >0
ON ROWS
FROM [Adventure Works cube]
Jiri Neoral

White iPhone 5 People Having hard time hearing me

I have an iphone 5. Most of the calls I make the person has a hard time hearing me to the point where I can no longer use speaker phone. But I can hear that other person come in just fine.

Jax Omen
" was going to ask how you know the color of the iphone that people are using when they have a hard time hearing you! "
Sorry you misunderstood my question let me rephrase my question. I was telling you the color and make of my phone and was wanting to know if their was anybody having any issues with this as well. It could be a problem with iphone 5 or just an issue with mine alone.I was trying to see if their were any troubleshooting steps I could try to rectify the problem I am having.

Having hard time connecting tv to macbook

I am having trouble connecting macbook pro to tv.

Hi Joyce,
If you have the proper adapter/s and cable/s, the most common reason the TV does not show what's on the Mac is that the proper input has not been selected. There's probably a button on the TV's remote labeled "input" or "source" and if you press that until the Mac's output shows up, you should be good to go.

Having hard time with MUVO not being recognized by comput

I was able to use my MUVO one time and put music on it. Any time after that it would not get recognized when in my USB port. I downloaded the firmware and I am getting this message:
"The device is not connected to the USB port"
Any ideas on how to get this figured out would be very helpful.
Thank you.

Dunno if this will work for you but it did for me...
. Right-click My Computer -> Properties -> Hardware -> Device Manager
2. Check that the unit is registered on the computer (it might be in the "Other devices" category marked with a yellow exclamation mark).
3. Right-click the device name -> Update Driver:
a. "Can windows connect to the windows update to search for the software"
Select the 3rd option: "No, not this time" -> Next
b. "If your hardware comes with an installation cd insert it now"
Select the 2nd option: "Install from a list or specific location(advanced)" -> Next
c. "Please choose your search and installation options"
Select the 2nd option: "Don't search I will choose the driver to install." -> Next
d. "Hardware type"
Select "Uni'versal Serial Bus Controllers".
It will then recognise and install the MTP file it needs from Windows and the unit will be recogised.

Trial of Creative Cloud, having hard time installing, or deleting.

I changed my computer, and trying to re downloading, but it looks not working.

Still keep trying to 1. how can I install the Creative Cloud, last time it worked so well with my old computer 2 mega Ram.
2. If I'm doing wrong, I want start all over again, want all cleaned up, and the new start. but can't uninstall the connetion manager
and illusrator (not actually installed, but in the list of programs."

HT204088 Having hard time making a purchase thru iTunes I put in my credit info

Having difficulties putting info to pay for purchases on iTunes & appleStore

Something you can try is resetting it all Settings > General > Reset > Reset all settings. Or go to Settings > Store & sign out & log back in. Another thing you can do is restore your ipod. This has happened to me but the only thing i did was that i created a new account but try doing the things above i just told you. :)

Why am I having hard time to connect wifi

Keep asking my wifi password over and over

Hi Catbhall,
The basic problem here is the printer is having a problem connecting to the internet.
1. Reset or turn off web services
2. Restore network defaults.
3. Reattach the printer to the network.
4. Turn web services back on.
This document also addresses this problem.
I was an HP employee.
Please mark the post that solves your problem as "Accepted Solution"

Having hard time getting this to work.

Hi
I have been working on this for several hours now and not having much luck. I think im not understanding the relationship between the two classes properly. Also there is a GUI that goes with it but it only so fay has the code to construct the GUI. My problem is getting these two classes to compile, then mabe i can move on to finishing the GUI. If you need the GUI then i can post it.
If you could, please take a look at these two classes that im having trouble with, where am i going wrong.......
import java.util.*;
 public class ShoppingCart {
private Product[] shoppingcart;
private static int count;
public void shoppingCart() {
shoppingcart = new Product[50];
 count = 0;
public void addProduct(String name, double price, int quantity) {
boolean found = false;
int i = 0;
while(i < count)
if(shoppingcart.getName().equals(name)) //tests for existing entry.
found = true;
break; // break form loop if true.
i++;
 // adds retrieves corresponding number for entry.
if(found == true)
shoppingcart[i].setPrice(price);
// adds new entry.
else {
if(count < shoppingcart.length) {
shoppingcart[count++] = new Product(name, price, quantity);
else {
Product[] temp = new Product[shoppingcart.length*2];
for (int j = 0; j < shoppingcart.length; i++)
temp[j] = shoppingcart[j];
temp[count++] = new Product(name, price, quantity);
shoppingcart = temp;
 public String findProduct(String name) {
for (int i = 0; i < count ; i++)
if(shoppingcart[i].getName().equals(name))
return shoppingcart[i];
return "Not found.";
I think i will post the other class below.....

This is the second class.
Explanation. With a working GUI this program will add and retrieve different products, two events are required, add/modify and search. new products are added to an array with three parameters name, price and quantity. These product need to be able to be called up and stored into a text area displaying name, price and quantity.
Any help is appreciated.
public class Product {
private String name;
private double price;
private int quantity;
public Product(String name, double price, int quantity) {
 this.name = name;
 //price = 0.00;
 quantity = 0;
 //this.name = name;
this.price = price;
public String getName() {
return name;
public double getPrice() {
return price;
public int getQuantity() {
return quantity;
 public void setName(String name) {
 name = name;
 public void setPrice(double price) {
 //price = price;
 public void setQuantity(int quantity) {
 quantity = quantity;
}

T2000 disks seem weird, having hard time to understand

Dear All,
I was reviewing disk scheme on a T2000 and I saw below.
It seemed to me weird because I see there are 2 raid volumes created only from same 2 disks.
How come it would be possible?
Does it make sense?
root@impdnrilab1:~# raidctl -l
Controller: 0
Volume:c0t0d0
Volume:c0t2d0
 Disk: 0.2.0
 Disk: 0.2.0
 Disk: 0.2.0
 Disk: 0.2.0
 Disk: 0.2.0
 Disk: 0.2.0
 Disk: 0.2.0
 Disk: 0.2.0
root@impdnrilab1:~# raidctl -l c0t0d0
Volume Size Stripe Status Cache RAID
 Sub Size Level
 Disk
c0t0d0 68.3G N/A OPTIMAL N/A RAID1
 0.3.0 68.3G GOOD
 0.2.0 68.3G GOOD
root@impdnrilab1:~# raidctl -l c0t2d0
Volume Size Stripe Status Cache RAID
 Sub Size Level
 Disk
c0t2d0 68.3G N/A OPTIMAL N/A RAID1
 0.3.0 68.3G GOOD
 0.2.0 68.3G GOOD
root@impdnrilab1:~# df -h
Filesystem size used avail capacity Mounted on
/dev/dsk/c0t0d0s0 9.8G 7.7G 2.1G 79% /
/devices 0K 0K 0K 0% /devices
ctfs 0K 0K 0K 0% /system/contract
proc 0K 0K 0K 0% /proc
mnttab 0K 0K 0K 0% /etc/mnttab
swap 21G 1.4M 21G 1% /etc/svc/volatile
objfs 0K 0K 0K 0% /system/object
/platform/SUNW,Sun-Fire-T200/lib/libc_psr/libc_psr_hwcap1.so.1
 9.8G 7.7G 2.1G 79% /platform/sun4v/lib/libc_psr.so.1
/platform/SUNW,Sun-Fire-T200/lib/sparcv9/libc_psr/libc_psr_hwcap1.so.1
 9.8G 7.7G 2.1G 79% /platform/sun4v/lib/sparcv9/libc_psr.so.1
fd 0K 0K 0K 0% /dev/fd
swap 21G 96K 21G 1% /tmp
swap 21G 40K 21G 1% /var/run
/dev/dsk/c0t0d0s3 41G 28G 13G 68% /opt
root@impdnrilab1:~# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
 0. c0t0d0 <LSILOGIC-LogicalVolume-3000 cyl 65533 alt 2 hd 16 sec 136>
/pci@780/pci@0/pci@9/scsi@0/sd@0,0
 1. c0t2d0 <LSILOGIC-LogicalVolume-3000 cyl 65533 alt 2 hd 16 sec 136>
/pci@780/pci@0/pci@9/scsi@0/sd@2,0
Specify disk (enter its number): ^C
root@impdnrilab1:~# cat /etc/vfstab
#device device mount FS fsck mount mount
#to mount to fsck point type pass at boot options
fd - /dev/fd fd - no -
/proc - /proc proc - no -
/dev/dsk/c0t0d0s1 - - swap - no -
/dev/dsk/c0t0d0s0 /dev/rdsk/c0t0d0s0 / ufs 1 no -
/dev/dsk/c0t0d0s3 /dev/rdsk/c0t0d0s3 /opt ufs 2 yes -
/devices - /devices devfs - no -
ctfs - /system/contract ctfs - no -
objfs - /system/object objfs - no -
swap - /tmp tmpfs - yes -
root@impdnrilab1:~#
root@impdnrilab1:~#
thanks & regards,
Halit

firefox start page, I'm not the most computer lit btw

IMac G5 having hard time

Similar Messages

Maybe you are looking for