Imac G5/Intel, OS 10.6., system does not start up after connecting new router

After connecting the imac to a new router the system hung completely up. After each input, e.g. opening preview or a browser, the coloured turning disc appeared and nothing happened anymore. Several restarts, also in safe mode,  were unsuccessful. I could not switch to another user.  Restart is only possible at all from installation disc but thereafter problem remains the same.
What can I do?

And, what happens if you disconnect the computer from the new router? Are you able to do this, and what happens when you try it?
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

Similar Messages

  • (10.1.3.0.4) Help System does not start

    For some reason my help system does not start when selecting from the menu. "Table of contents" or "index" options do nothing. It use to work fine. Conext sensitive help works okay by pressing F1.
    Any ideas?

    Hi paulfrench, check your documentation settings
    Menu Tools -> Preferences -> Documentation
    Make sure you have checked all of them.
    Luis R.

  • Dispatcher process on ABAP +  JAVA system  does not start.

    Hi all,
    Dispatcher process on ABAP +  JAVA system  does not start.
    Can someone help me to solve this issue in a ABAP+JAVA stack system?
      service p4 ================= ERROR =================
    Core service p4 failed. J2EE Engine cannot be started.
    com.sap.engine.frame.ServiceException: <--Localization failed: ResourceBundle='com.sap.engine.frame.KernelResourceBundle', ID='Can't assign requested addres
    s (errno:227)
    com.sap.engine.services.rmi_p4.dispatcher.TransportMonitor constructor : can't open  server socket.', Arguments: []--> : Can't find resource for bundle java
    .util.PropertyResourceBundle, key Can't assign requested address (errno:227)
    com.sap.engine.services.rmi_p4.dispatcher.TransportMonitor constructor : can't open  server socket.
            at com.sap.engine.services.rmi_p4.dispatcher.TransportMonitor.<init>(TransportMonitor.java:211)
            at com.sap.engine.services.rmi_p4.dispatcher.P4ServiceFrame.start(P4ServiceFrame.java:93)
            at com.sap.engine.core.service630.container.ServiceRunner.startCommunicationServiceFrame(ServiceRunner.java:228)
            at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:158)
            at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
            at com.sap.engine.core.thread.impl6.SingleThread.execute(SingleThread.java:78)
            at com.sap.engine.core.thread.impl6.SingleThread.run(SingleThread.java:148)
    com.sap.engine.frame.ServiceException: <--Localization failed: ResourceBundle='com.sap.engine.frame.KernelResourceBundle', ID='Can't assign requested addres
    s (errno:227)
    com.sap.engine.services.rmi_p4.dispatcher.TransportMonitor constructor : can't open  server socket.', Arguments: []--> : Can't find resource for bundle java
    .util.PropertyResourceBundle, key Can't assign requested address (errno:227)
    com.sap.engine.services.rmi_p4.dispatcher.TransportMonitor constructor : can't open  server socket.
            at com.sap.engine.services.rmi_p4.dispatcher.TransportMonitor.<init>(TransportMonitor.java:211)
            at com.sap.engine.services.rmi_p4.dispatcher.P4ServiceFrame.start(P4ServiceFrame.java:93)
            at com.sap.engine.core.service630.container.ServiceRunner.startCommunicationServiceFrame(ServiceRunner.java:228)
            at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:158)
            at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
            at com.sap.engine.core.thread.impl6.SingleThread.execute(SingleThread.java:78)
            at com.sap.engine.core.thread.impl6.SingleThread.run(SingleThread.java:148)
    [Framework -> criticalShutdown] Core service p4 failed. J2EE Engine cannot be started.
    Nov 9, 2011 6:41:09 AM              com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:6]_26] Fatal: Critical shutdown was invoked. Reason is: Core
    service p4 failed. J2EE Engine cannot be started.
    Please let me know if you need any further information in this regard.
    with regards,
    Raja

    Hi,
    Core service p4 failed. J2EE Engine cannot be started.
    com.sap.engine.frame.ServiceException: <--Localization failed: ResourceBundle='com.sap.engine.frame.KernelResourceBundle', ID='Can't assign requested addres
    Please reboot the server to free up occupied ports. Later start the sap system.
    Regards,
    Deepak kori

  • IPhoto does not start up after upgrading

    On my new iMac iPhoto does not start up after migrating. Upgrade from iPhoto 6/Snow Leopard > Lion 10.7.1 with iPhoto 9.1.5. When the conversion is finished I can see the new library, it works allright. And with packet-inspection (or how is that called in English) all maps & data seems to be OK; I can check the seperate pics.
    But: iPhoto won't start up a second time (grey screen with infinite spinning wait cursor). The same thing is happening when I add a new library and drop in some pictures.
    What can cause this problem?

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • Firefox does not start up after an automatic update. Every time i try to open it, it just prompts the Mozilla Crash Reporter.

    Firefox does not start up after an automatic update. Every time i try to open it, it just prompts the Mozilla Crash Reporter.
    ''Add-ons: {972ce4c6-7e08-4474-a285-3208198ce6fd}:3.6.10
    BuildID: 20100914125854
    CrashTime: 1290192405
    EMCheckCompatibility: true
    FramePoisonBase: 00000000f0de0000
    FramePoisonSize: 65536
    InstallTime: 1287124738
    ProductName: Firefox
    ReleaseChannel: release
    SecondsSinceLastCrash: 422
    StartupTime: 1290192405
    Theme: classic/1.0
    Throttleable: 1
    Vendor: Mozilla
    Version: 3.6.10
    This report also contains technical information about the state of the application when it crashed.''
    Same thing happens when i click restart.
    No difference when i run it in Safe mode. And it won't let me create a new profile either. Is there anyway else i can extract my bookmarks? This is driving me crazy!

    Did the crash reporter send any crash reports?<br />
    You can see the crash reports in this folder:
    "C:\Users\&lt;user&gt;\AppData\Roaming\Mozilla\Firefox\Crash Reports"
    See: http://kb.mozillazine.org/Breakpad
    See also [[Firefox crashes when you open it]]
    Create a new profile as a test to check if your current profile is causing the problems.<br /><br />
    See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting&#58; Make a new profile]]<br /><br />
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins"<br /><br />
    If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)<br /><br />
    See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox<br /><br />
    If that still causes the same problem then do a clean reinstall and remove the Firefox program folder.
    * Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    * Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    * Don't remove personal data when uninstalling.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    See:
    * http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • After downloading mountain lion the internet does not start automatically after start or restart but if I use diagnostics it starts is there a simpler solution

    After downloading mountain lion the internet does not start automatically after start or restart but if I use diagnostics it starts is there a simpler solution?

    Extensions can sometimes be the cause of problems. If the problem does not occur in Safe Mode, then you can disable your extensions one-by-one until you find out which one is causing the problem. See [[Troubleshooting extensions and themes]]

  • ITunes does not start anymore when connecting iphone

    Hello,
    since my latest upgrade of itunes (still under snow leopard) itunes does not start anymore when connecting my iPhone 4 to my Macbook Pro.
    Meanwhile I upgraded to Lion and installed the latest itunes patch but same behavior,
    Does anybody has an idea to solve this issue?
    Thx,
    Hendrik

    Hi,
    See this Discussion:
    https://discussions.apple.com/message/15693777#15693777
    Cheers,  

  • Itunes does not start automaticly when connected although auto is thicked help?

    Itunes does not start automaticly when connected although autostart is thicked can anyone help?

    Hi,
    See this Discussion:
    https://discussions.apple.com/message/15693777#15693777
    Cheers,  

  • New Macbook Pro does not start up after updating...HELP!!!

    Hi,
    My new Macbook Pro does not start up after it got updated. The first time I used it, it was perfect. I updated it and restarted it when it told me to but it doesn't boot. It shows an apple and a spinning circle when it turns on but that's it.
    Can somebody please help me?

    You should probably post your question in the MacBook Pro discussions:
    http://discussions.apple.com/category.jspa?categoryID=190

  • "Start Deletion of Data in Receiver System" does not start

    I faced the problem tha data deletion in Receiver system is not started in TDTIM synario.
    I started the activity "Start Deletion of Data in Receiver System" , the job "CNV_TDMS_09_RESTART_JOBS" is aborted till the job "CNV_MBT_CNV_TDMS_09_START_JOBS" is over in Receiver System.
    The error message is "No log was created for object CAGTFBS and sub-objekt SLOMBT".
    After The job "CNV_MBT_CNV_TDMS_09_START_JOBS" is over, the job  "CNV_TDMS_09_RESTART_JOBS" is finished normaly but the no deletion job is released.
    I carried out some deletion job by manual operation but other deletion job is not released.
    Does Anyone knows the solution of this problem ?
    Version:TDMS3.0 SP17
    Basis: 700
    Susumu

    Hi Joerg,
    Thank you for your reply.
    > Please check the syslog for any reference to bad defined batch jobs! (all on receiver)
    Syslog is nothing in receiver system.
    > Is there any deletion job that can not be startet manually on the receiver side?
    >  (So normally on top of the list of scheduled deletion jobs.
    I think all deletion job can be started manually.
    Nomally, some deletion job is finished, the job is released next deletion job but no deletion jobs is released.
    In addition, If rerun job "CNV_TDMS_09_RESTART_JOBS" is finished, no deletion jobs is released.
    Best regards,
    Susumu

  • System does not come up after homogeneous system copy

    Hi there,
    after a regular system copy of our Java-only Portal the system does not come up.
    'startsap' warns with these messages :
    Warning : /usr/sap/SPE/JC51/j2ee/cluster/bootstrap/../server0/bin/ext/jdbdictionary/jddi.jar file stated but does not exist !
    Warning : /usr/sap/SPE/JC51/j2ee/cluster/bootstrap/../server0/bin/ext/antlr/antlr.jar file stated but does not exist !
    Warning : /usr/sap/SPE/JC51/j2ee/cluster/bootstrap/../server0/bin/system/frame.jar file stated but does not exist !
    and, yes , these really important directories do not exist - under /usr/sap/<SID>/JCxy/j2ee/cluster/server0 there is
    only ONE directory , which is 'apps' .
    database starts, but not the j2ee engine
    OS :Solaris 10, Oracle DB
    I'm confused (i did the system copy 2 times, because I did not believe what I saw ....)
    Regards,
    Ronny

    >
    Sunny Pahuja wrote:
    > Hi,
    >
    > Have you done system refresh with sapinst ?? was it successful or not ?? Could you please paste dev_server, std_Server and dev_dispatcher logs here ?
    >
    > Thanks
    > Sunny
    Hi Sunny,
    thanx for your answer.
    There are NO logs, either dev_server* nor dispatcher.
    the only thing I found were under the work-directory, the dev_jcmon says :
    [Thr  1] Wed Oct 27 11:01:40 2010
    *[Thr  1] *** ERROR => Can't attach to administration shared memory (rc = 3) [jcmonxx_mt.c 228]*
    and the bootstrap says mainly that it could not find the framework :
    [Thr  1] JLaunchRequestQueueInit: create named pipe for ipc
    [Thr  1] JLaunchRequestQueueInit: create pipe listener thread
    [Thr  2] JLaunchRequestFunc: Thread 2 started as listener thread for np messages.
    [Thr  3] WaitSyncSemThread: Thread 3 started as semaphore monitor thread.
    [Thr  1] Tue Oct 26 10:00:01 2010
    [Thr  1] SigISetDefaultAction : default handling for signal 18
    [Thr  1] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
    [Thr  1] CPIC (version=701.2009.01.26)
    [Thr  1] [Node: bootstrap] java home is set by profile parameter
            Java Home: /usr/java
    [Thr  1] JStartupICheckFrameworkPackage: can't find framework package /usr/sap/SPE/JC51/exe/jvmx.jar
    That make 'sense', because there is nothing  it could find ..
    Regards Ronny

  • Xfce4-power-manager does not start, but after relogin - works

    Hi all.
    When I login after system start, xfce4-power-manager does not start and systemtray icon doesn't appear. But after relogin (not restart), the systemtray icon of xfce4-power-manager appears and power manager itself works correctly (if I don't relogin, notebook will shutdown after 10 minutes of downtime - that rule doesn't exist in xfce4-power-manager settings).
    Diff between two logs (before relogin and after, xfce4-power-manager --debug command)
    diff log_1 log_2
    35c35,36
    < TRACE[xfpm-battery.c:286] xfpm_battery_refresh_icon(): Battery state 0
    > TRACE[xfpm-battery.c:150] xfpm_battery_refresh_visible(): visible=TRUE: ((XfpmShowIcon) SHOW_ICON_WHEN_BATTERY_PRESENT)
    > TRACE[xfpm-battery.c:286] xfpm_battery_refresh_icon(): Battery state 4
    51d51
    < TRACE[xfpm-polkit.c:238] xfpm_polkit_free_data(): Destroying Polkit data
    System
    Linux gready 3.14.1-1-ARCH #1 SMP PREEMPT Mon Apr 14 20:40:47 CEST 2014 x86_64 GNU/Linux
    systemd 212-3
    xfce4-power-manager 1.2.0-6
    That bug start happening after one of last week updates. I don't have a package cache.
    Can anyone help me?
    p.s. sorry for a bad English.

    Yes, i'm actually running xfce4 (all other things from xfce4 group are installed).
    It starts from a login manager named LightDM.
    AcpiD installed as a dependency.
    logind.conf
    # This file is part of systemd.
    # systemd is free software; you can redistribute it and/or modify it
    # under the terms of the GNU Lesser General Public License as published by
    # the Free Software Foundation; either version 2.1 of the License, or
    # (at your option) any later version.
    # See logind.conf(5) for details
    [Login]
    #NAutoVTs=6
    #ReserveVT=6
    #KillUserProcesses=no
    #KillOnlyUsers=
    #KillExcludeUsers=root
    #InhibitDelayMaxSec=5
    HandlePowerKey=ignore
    HandleSuspendKey=ignore
    HandleHibernateKey=ignore
    HandleLidSwitch=ignore
    #PowerKeyIgnoreInhibited=no
    #SuspendKeyIgnoreInhibited=no
    #HibernateKeyIgnoreInhibited=no
    #LidSwitchIgnoreInhibited=yes
    #IdleAction=ignore
    #IdleActionSec=30min
    I turned off key handlers because I truly HATE when I press power button and a notebook doing shutdown after that.
    Last edited by theperfectblance (2014-04-17 06:57:32)

  • Transport service does not start automatically after upgrade to exchange 2010 SP2 from Exchange 2010 SP1

    Hi,
    I am trying to upgrade Exchange 2010 SP2 from SP1, but Transport service does not start automatically.
    Tried manually start services, it started successfully but again goes down within few seconds automatically.
    Reboot server. but no luck.
    Any help.
    MD

    Hi,
    I recommend you use event viewer to check if there are any relate event logs. This may help us to find the cause.
    In addition, as Amit mentioned, Exchange 2010 SP2 isn't supported by Microsoft, I think upgrading to SP3 is a much more sensible approach.
    Thanks.
    Niko Cheng
    TechNet Community Support

  • Itunes does not start anymore after upgrade to 6.05.20

    I upgraded itunes to the current version and after that itunes does not start anymore. I scanned for virus with an up-to-date scanner, scanned for adware with Windows defender and ewido and used the tips from http://docs.info.apple.com/article.html?artnum=42963
    I run itunes on Windows Server 2003 which worked fine for three years. I know it is officially supported on XP only.
    I deinstalled itunes and reinstalled afterwards no change. The windows event log shows some erors
    Faulting application iTunes.exe, version 6.0.5.20, faulting module shell32.dll, version 6.0.3790.2662, fault address 0x0015af84.
    Any other idea?
    Thanks
    Christoph

    ok, so I am not sure if this is legal or not, but there is a site called oldversion. Go there, and you can get past versions of applications such as aim , and in this case, itunes. just uninstall your other itunes first.
    Sometimes different versions of appications run better on different computers. this new itunes probably just has something the last one didnt that cant run with what you have on your computer

  • HT4623 IPhone does not accept slice after Iihaddat new 6.0.1 device type as the iphone 3gs

    Official solution in the iPhone does not accept SIM after Iihaddat together knowing that iTunes updated, the new release bearing ČÓ Miqubl chip device Brightening official

    I too have experienced the Logitech s715i error message stating something like, the accessory is not a supported device of the iPhone. The speakers will charge my phone but will not "connect" to play music. I have an iPhone 4S running version 6.1 (10B142). 
    I too have contacted Logitech for support and am awaiting a reply.
    Can we get some help over here?

Maybe you are looking for