Imac G5 powerpc upgrade from 10.4.11 to 10.5.4

wonderig were to buy the dvd rom leopard 10.5.4 cheap or does apple do the upgrade was checking ebay dvd are very expencive dont want to spend a lot mac only cost me £200 my mac running on 10.4.11

Watch eBay or other used goods sites.
http://www.ebay.com/sch/sis.html?_kw=Apple+Mac+OS+X+Leopard+10.5+-+Full+Retail+I nstallation+Disc.+Only+Used+once%21
(Ignore the Snow Leopard discs. The black and purple boxes/discs are what you want).
Some net retail suppliers carry copies (usually not cheap).
http://www.amazon.com/Apple-10-5-4-Leopard-Full-Install/dp/B0055OG7RQ
No retail Leopard available from Apple......

Similar Messages

My iMac will not upgrade from 10.8.5 to 10.9.3

I am currently running Mac OS 10.8.5 which I purchased via APP Store. I have downloaded the free Mac OS 10.9.3, which claims it is compatabile with Mac OS versions 10.6.8 and higher. However, when I try to run the download, it says that I need version 10.9 in order to upgrade to 10.9.3. I cannot download version 10.9 because only 10.9.3 is available at the App store, or on the Apple web site. My latest Mac OS boot disc is Snow leopard, as I purchased Mountain Lion via App store and do not have a hard copy DVD from which to restore. How do I solve this dilema without restoring operating system to Snow Leopard. Is there a work around? Please advise!!

If you actually went to the Mac App Store and "purchased" Mavericks, then baltwo's answer is your only choice. Nobody here can fix a problem with the Mac App Store.
If you didn't get the Mavericks installer from the Mac App Store and instead downloaded the 10.9.3 Update from Apple Downloads, then you're doing it wrong. That update is for updating 10.9.x to 10.9.3 (or possibly just from 10.9.2 depending on which one you downloaded). To go from 10.8.x to 10.9.x requires the Mavericks Upgrade which is only found in the Mac App Store.

I just bought a g4 power pc 1gig new in the box. I have an iMac that I had upgraded from Tiger to Lepoard. When I put my Lepoard disc in the g4 it gave me a message to restart but when I try to restart it only powers and repeats the message what do I do

I have an iMac that I upgraded from Tiger to Lepoard. I found a brand new power pc g4 1gig never unpacked and tried to use my Lepoard disk to upgrade the os but I get a restart message but when I power down it stays off and when I power up I get the restart message. If I can't upgrade to Lepoard how do I get the computer to eject my Lepoard disk and go back to the os that was on it? Thank you anyone who can advise.
Peace

When you power up the computer hold down the click bar on the track pad (or the left click on a mouse) and the computer will eject the disk.

Upgraded from 2gb to 4gb of RAM and now my Imac freezes up all the time.

I have a 2009 model Imac and I upgraded from 2gb to 4gb but now after about 20 minutes of the computer being on it will freeze up randomly. It could be 20 mins - 3 hours of use before it freezes up. I did my research and I'm didn't get any RAM my Imac couldn't handle...so I have NO idea what's wrong. Any help would be greatly appreciated!

As old as it is have you cleaned out the dust? Dust buildup can lead to over heating issues. Remove any and all things plugged into it including the power cord, Remove the RAM access grille. Vacuum all openings starting with the RAM access area (air intake). Vacuum all ports and plugs, DVD slot and the opening across the top of the rear of the body. Blow compressed air through all your openings and vacuum again to remove any dust you loosend. Reinstall the RAM grille. Plug in the keyboard and mouse if not blue tooth. Insert power cord...
You are now in a perfect position to do a
SMC RESET
http://support.apple.com/kb/HT3964
Shut down the computer.
Unplug the computer's power cord and ALL peripherals.
Wait 15 seconds.
Attach the computers power cable.
Wait another 5 seconds and press the power button to turn on the computer.
Here is a Widget to monitor your temps and other operations:
http://islayer.com/apps/istatpro/

Import Mail from Imac G5 PowerPc Panther to Imac 8.1 Intel with Leopard

Hi,
I wonder if someone could be so kind as to outline the steps to transfer my mail and associated mail preferences (rules etc) from my old G5 PowerPC to my new Intel based IMAC. I'm a little unsure as I've heard various nightmare stories and also some rumour about emails not being readable once transferred across from the PowerPC based IMACS to the new Intel based IMACS.
My mail is extremely important so I'd rather proceed cautiously and correctly to ensure no loss of data.
Many thanks in advance
Q.

You can restore the iMac to initial condition with respect to Mail by removing the current Mail folder (Home/Library and locate the Mail folder) and the com.apple.mail.plist file from Home/Library/Preferences.
On the G5, first use Rebuild Mailbox on each mailbox before the next attempt to move the Mail folder and plist from the G5, while able to do so in Panther. Then read the following for background:
This happened a lot when people upgraded a single computer from 10.3 to 10.4 and Mail 2.x, but the issues are nearly the same if upgrading from 10.3 to 10.5, and much the same trying to migrate the Mail assets.
For background read the info in the topic at the link below, which while written about conversion from 10.3 to 10.4, would also structurally apply to a conversion from 10.3 to 10.5, even if using 10.4 in between. Sadly, it would appear the conversion process has not been strengthened, although the real fault lies with the condition of the mailboxes prior to Upgrade -- this is the purpose of making the index for each mailbox as healthy as possible before Mail tries to convert the structure on the mailboxes.
http://discussions.apple.com/thread.jspa?messageID=5664866&#5664866
In this situation the messages are not lost, but properly converting them for use in Mail 3.0 (or first in Mail 2.0) can be a detailed and tedious project. The best thing would be to have used Rebuild on every mailbox prior to the Upgrade. Of course I recognize that for those converting a single Mac it may be too late for that now, but you have opportunity to improve on that!
There is an issue often when going directly from 10.3.9 and Mail 1.3.11 related to conversion of the data in the mbox file into xxxx.emlx files in the Messages folder that Mail 3.x uses. The Messages folder came into use with 10.4.
An important comparison to make, after you know where to look in the Finder, is to compare the size of the mbox file in any xxxx.mbox folder to that of the Messages folder in the same mailbox. The reason to do this is check whether all messages that were in the mbox when the Upgrade was done were converted properly.
There can be issues if you ran a still earlier version of Mail, and other leftover files might then be present which could be problematic.
Please do not hesitate to ask any and all questions you need to ask to get comfortable with all you may need to do, depending on the number of large and complex mailboxes you had prior to the Upgrade.
If nothing else, be sure to read:
http://docs.info.apple.com/article.html?artnum=301315
which was mentioned the referenced topic.
Btw, if the Messages folder of any xxxx.mbox were to be near or over 2 GB all by itself there could be another problem called overstuffing.
Be sure to keep a copy of the prior Mail folder and plist available for further attempts if the next one does not succeed. The index structure has changed since 10.3, but in converting Mail can use the old form of one index per mailbox to the single universal index now called the Envelope Index. Using the old indexes and table of content info is what allows Mail to retain the relationship of incoming messages and replies to those messages.
Ernie

On my iMac I upgraded from OSX 10.6 to OSX 10.6.8. Now Photoshop Elements won't connect to my scanne

On my iMac I upgraded from OSX 10.6 to OSX 10.6.8. Now Photoshop Elements 6 will not communicate with my scanner HP Photosmart 209a. I need an HP import module. How do I get one?

You may probably look for it on HP's site. - http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&product=3777182
Thanks
Andaleeb

Finder crashes with OS 10.6.8. With or without any apps running finder will hang repeatedly causing the iMac to hang also. I upgraded from 10.5.8 to 10.6.8 recently and finder was OK for 1 week. How do I submit a crash log?

Folllowing an upgrade from 10.5.8 to 10.6.8 (Snow Leopard) Finder frequently hangs, causing any open apps and the iMac to hang. This will occur whether or not any 3rd party apps or Safari are open. About 50% of the time trying to empty the trash will cause a finder hang. There are no error messages to let me know what code such a hang may be. Repeated attempts to force quit the iMac always fail, so I have to hard crash using the power button. Multiple attempts are required to successfully restart via the login screen. I do not know whether any other apps, such as Safari or screen saver may be involved. I think a crash log would help, however I am not sure whether I should look in: useres/library/logs/DaiagnosticReports or : users/library/logs/CrashReporter, and whether I should attempt to open the latest in either in Console or Text edit and then post here. Also, is this the appropriate site to post a log in the hope that Apple may look at it? I have read through threads on Apple finder, and am stunned to find that after all these OS-X versions finder is still buggy and inferior to MS Explorer and Apple appears to be in denial. Maybe their efforts are in devices such as iPhones and iPads? Ths issue never occured in OS 10.5.8.

Better is http://www.apple.com/feedback/macosx.html

I use an Epson Stylus Office BX320FW printer with my IMac. Since upgrading OSX, I have lost the ability to print and scan. I have downloaded printer drivers from both Epson and Apple. I am using the printer in wifi mode but can not get it print or scan

Hi Everybody,
I use an Epson Stylus Office BX320FW printer with my IMac. Since upgrading OSX, I have lost the ability to print and scan. I have downloaded printer drivers from both Epson and Apple. I am using the printer in wifi mode but can not get it print or scan. How do I uninstall the Epson software and start all over again?
nickel_man_65

Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
Someone on this forum suggested, that USB3 may interfere with the magic mouse.
I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
Thanks for the advice, Bee
Cheers, Gerd

I want to upgrade to Lightroom 5, but I'm concerned about compatibility with my 2008 intel Core 2 Duo iMac with only 4G of Ram. Will I be able to run Lighroom 5 if I upgrade from Snow Leopard to Lion?

I want to upgrade to Lightroom 5, but I'm concerned about compatibility with my 2008 intel Core 2 Duo iMac with only 4G of Ram. Will I be able to run Lightroom 5 okay if I upgrade from Snow Leopard to Lion? What will happen to the applications that aren't 64-bit compatible? Also the Eye-one Display 2 colorimeter to calibrate the monitor will not run on Lion, so that will be an expensive upgrade to an i1DisplayPro. Is the upgrade important enough to offset the expense? I have an Epson R2000 printer. Will there be problems with the drivers if I upgrade to Lion? It would be great to hear from other mac users who are also photographers and who print their own photos.

Before upgrading to Lion be sure to read this link:
https://discussions.apple.com/docs/DOC-6271
Adobe lists these requirements:
http://www.adobe.com/products/photoshop-lightroom/tech-specs.html
Looking at http://www.everymac.com/ even the earliest 2008 iMac was fully 64 bit, even though Boot Camp doesn't support 64 bit Windows on that machine.

HT1420 I purchased an audio book several years ago. When I upgraded from a 2009 imac to a 2012 lion iMac, I was able to transfer all songs and media from my I-tunes account with the exception of my audio books. My apple I.D. I tunes account was same of

Upgraded from a 2009 to 2012 Imac with lion. Successfully transferred all media and music with exception of audio books. Same Apple I.D. & I-tunes account.
Apple support unable to help. Have done all the routine i.e: ITunes store, click on purchased, etc. Audio Books not shown in history.
Help

Audiobooks are currently a one-time only download (which I think is a requirement from audible.com who supply them). Have you not got them on a backup ? If not (and I don't know if this is what you've already tried) then you can try contacting iTunes support and see if they will grant you a re-download : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

I can not upgrade from version 9.1.5 to 9.2.3 on my IMAC free?? I have to pay for this upgrade?

I can not upgrade from version 9.1.5 to 9.2.3 on my IMAC free?? I have to pay for this upgrade?

That is a free update (not an upgrade) what happens when you try? How are you trying to update? did your Mac come with restore disks or did you download software form teh App Store? Have you logged onto the App store and checked purchased software for updates?
LN

How can i upgrade from iphoto 7.1.5 to 8.1.2 on an older iMac running OSX 10.6.8 ?

How can I upgrade from iphoto 7.1.5 to 8.1.2 on an older iMac running OSX 10.6.8 ?

With the above listed config that I have (iphoto 7.1.5 on an older iMac running OSX 10.6.8), how can I move my iPhoto library from this old iMac (2006) to my NEW iMac (2011) that is running iPhoto 9.5.1 ?
To open an iPhoto 7.1.x version in iPhoto '11 you need to run the iPhoto Library Upgrader. See this Support document:
iPhoto '11: About the Library Upgrade
Download and install the upgrader, then run it on your iPhoto 7.1.5 library. After that, iPhoto will be able to open your library and upgrade it to version 9.5.1. And you will be able to merge the libraries with if Library Manager.

How do I upgrade from Mac OS X 10.5.8 to the latest version on my imac 8.1?

Here are my specs:
Model Name: iMac
Model Identifier: iMac8,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.8 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 6 MB
Memory: 2 GB
Bus Speed: 1.07 GHz
I am trying to upgrade from Mac OS X 10.5.8 which is outdated to the latest version which is compatible on my computer? Does apple have an online adress for upgrading? I cannot pay for it right now.
Thank you

Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Yosemite
You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
Upgrading to Yosemite
To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    OS X Mavericks/Yosemite- System Requirements
    Macs that can be upgraded to OS X Yosemite
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.

I am running Snow Leopard 10.6.8 with bootcamp 3.3 on my Imac 2011. I need to updgrade to mountain lion. If I first upgrade to mountain lion, how do I go about upgrading from bootcamp 3.3 to latest bootcamp for mountain lion?

I am running Snow Leopard 10.6.8 with bootcamp 3.3 on my Imac 2011. I need to updgrade to mountain lion. If I first upgrade to mountain lion, how do I go about upgrading from bootcamp 3.3 to latest bootcamp for mountain lion?
I have seen a lot of discussions upgrading from Boot Camp 4 to 5 but no answers upgrading from boot camp 3.3 to 5. My worry is that if I upgrade from snow leopard to mountain lion, that my bootcamp partition will no longer be able to boot up. There seem to be a lot of threads suggesting problems that are possible. Has anyone gone through this upgrade with success?

Before doing any installation restart OSX from your 10.6 Snow Leopard DVD and use Disk Utility to Both Repair The Disk and Repair the Permissions of your Macintosh HD.
Next remove your Snow Leopard DVD and restart your iMac into OSX.
Update to the latest version of OS X Snow Leopard by clicking the Apple icon and choose Software Update to install Snow Leopard v10.6.8, the latest version.
Use Time Machine to make a Full Backup of your Macintosh HD.
Shut down and restart into Windows by holding the Option key at the chime and selecting Windows.
Now use Windows Backup to make a Full Image Backup of your Windows Installation to a removable drive.
Shut Down and Boot back into OSX.
Open the Mac App Store from your Dock to buy and download Mountain Lion. Then follow the onscreen instructions to install it.
Upgrading your OSX to 10.8 should not effect the Windows Partition at all since you are only upgrading the Mac side. You should not have to run the Boot Camp Assitant 5 Utility in OSX at all.
Your Boot Camp 3.3 Windows Support Drivers et. al only effect your Windows installation and should continue to run fine after upgrading.
Which version of Windows do you already have installed on the existing Boot Camp Partition?
Is it 32 bit or 64 bit?

My 2007 iMac is 2.4 GHz Intel Core 2 Duo. I must upgrade from OS10.5.8 to at least 10.7. I know I must go to 10.6.8 on the way. Two questions: 1. Can I upgrade on my own (bright but ignorant)? 2. Should I go to 10.7 or Mavericks?

My 2007 iMac is 2.4 GHz Intel Core 2 Duo. I must upgrade from OS10.5.8 to at least 10.7. I know I must go to 10.6.8 on the way. Two questions: 1. As a bright but ignorant person, what problems will I encounter in upgrading? 2. Should I go to 10.7 or all the way to Mavericks?

Thanks for your reply--makes me not want to get involved with Mavericks, and I appreciate the heads-up. What I hadn't thought about is that by upgrading my OS I would also have to upgrade from my Adobe CS1. Since I'm retired from my art career, I'm reluctant to spend the dough on new CS; but I still like using PhotoShop and InDesign (and obviously don't care that they are outmoded). But I'll bet any newer Mac OS won't run my old software.

Imac G5 powerpc upgrade from 10.4.11 to 10.5.4

Similar Messages

Maybe you are looking for