Imac g5 reload os

Hello, I have a 20 inch g5 imac, replace he hard drive and now can not reload the os getting a icon on the screen circle with what looks like time zone setting in the install process, can any one help on this please

Are you booted off of Disk 1 that came with the computer? You need to use Disk Utility to erase and reformat the drive before installing the OS. Format is Mac OS Extended (Journaled) and click the option button to select GUID. Then try to install.

Similar Messages

I reloaded iWork 08 on my iMac after a crash. All documents created on this ap now will not read. Error message says I need a newer version to read the document.

After a crash on my iMac, I reloaded iWork 08 from my disk. All the documents I created in this ap will no longer open. Message says I need a newer version of Pages to open this document. I can find nothing on this problem in apple support.

It sounds as you have had iWork09 on your computer. Check that you don't have a iWork09 CD.

I've had a new hard drive installed and reloaded all my stuff via time capsule and now can't connect to the internet although it say Airport is connected. How can I fix this problem ?

Just had a new hard drive for my iMac and reloaded all my stuff via time capsule, all works fine apart from Safari which won't connect to internet. Airport is connected but each time Safari comes back saying there is no connection....any help gratefully recieved.

So you have the apple rotuer called a time capsule and you have complete the frist time machine back up? but there is not internet access ?
If so.
Opem airport utiltiy on your Comptuer :
What is the IP ? > if its 169.254.xx.xx > its a self assigned
Try power cycling the Internet source for up to 1 mintue and make sure all the lights turn off.
In Airport Utility Version 5.5.3 / 5.6.1
Gi > Intenret > conncetiong sharing > Is it off bridge mode change it to share a public Ip address
In airport Utility version 6.0/6.1
Edit > network > rotuer mode : Should be DHCP and NAT unless you use PPPoE to conecnt to the internet then this is automatically invoked.

I have an iMac 8.1, OSX 10.6.8 with XP running in Boot Camp partition. My USB keyboard (MB110LL/A) was damaged by water. I ordered a new keyboard from the Apple Store. I was sent model MB110LL/B. Special function keys will not work in XP. Any Ideas?

I have an iMac 8.1, OSX 10.6.8, Boot Camp 3.2 running Windows XP. My original keyboard (MB110LL/A) was damaged by a water spill. I ordered a new one from the Apple Store. They sent me MB110LL/B, function keys need updated drivers (Boot Camp 3.3) which will only install if Windows 7 is installed. I have a large amount of older software that runs under XP but not Windows 7. The Apple support team basically said "too bad". If they replace a keboard model with a new model, they should at least make it backwards compatable or provide a Boot Camp update that will allow this model to work on older iMacs. Reloading Bootcamp 3.3 several times has no effect because it does not detect Windows 7. Any Ideas or help would be appreciated.

It is free. It is beta. It works well - I use it on mine and two PCs as well...
MS Security Essentials will no longer install due to compatibiliity issues - that is the idea of a beta - and the RC could be out in June.
Windows 7 doesn't work great on any Mac, or Apple drivers, fan cvontrol to manage heat, and other issues.
Put 8 in and get to know it, then when the RC comes out you'll be ready

Search function in ical.

Doesn't give same results on same calendar on MacBook Air & Imac with same Lion & Ical version on both computers.
The two calendars are both synced through same Icloud Account.
Searching options selected are the same on both computers to.
Searching on MacBook Air is retrieving events that Imac does'nt find although they do exist on the two machines.
Anyone having an idea ?
Thanks.
Jean.

I finally found the solution :
All the events Ical search option couldn't retrieve,
were EVENTS ENTERED IN ICAL BEFORE UPGRADING FROM SNOW LEOPARD
TO LION OS.
I Erased my calendar from the Imac, and reloaded it from a backup I made on my Macbook Air,
where I had not the same problem bacause it was running native Lion OS.
I think I could as well have reloaded it from Icloud.
Hoping this may help someone.
Jean.

Messed up Setup Assistant - need to copy TM backups to new ext HD then run Migration Assistant, I think

On a new 27" iMac, I ran the Setup Assistant a couple of days ago to transfer info from TM backups on an external hard drive. Unfortunately, there were clones on there from Feb 2010 (I didn't understand that TM needs to be alone on a HD) and the Setup Assistant picked ran those preferentially so it appeared that I had lost everything since Feb 2010. HOWEVER, the TM backups are still in the Backups.backupdb folder, and I can access each of the individual files. Now the external HD has not only the 3 clones and the Backups.badkupdb but also folders for Applications, Desktop, dev, Developer, home, Library, net, System, User Guides And Information, and Users. Most are dated to Feb 2010, but the System and Developer folders seem to have been updated to 6 Aug 2012 and 8 Aug 2012. The TM backups contain User info for the Office 2008 suite, including Entourage, and this is what I need -- all of my emails, documents, etc.
I have been trying to copy just the Backups.backupdb folder to a new external HD before doing anything else. I have followed the directions given by Apple at http://support.apple.com/kb/HT5096?viewlocale=en_US&locale=en_US. Unfortunately, this yields a nifty error message: "The operation can’t be completed because an unexpected error occurred (error code -8003)." I have not found a solution in the Apple communities for this error message in the TM backup copying process - all mentions seem to relate to problems emptying the Trash when deleting TM backups. I have NOT tried the cloning process mentioned in this thread:https://discussions.apple.com/message/16601049#16601049. If the copying process has failed, will the cloning process allow me to pick up JUST the TM backups without damaging the TM backups?
I am thinking that once I have the TM backups successfully copied, I will use that new copy - without the clones - to run Migration Assistant. At this point, will it be better to use Migration Assistant OR go back and delete everything on the new 27" iMac and reload Lion, then run Setup Assistant again? The thought of going back to square one with Lion has me more than a bit rattled, to tell the truth.
Have others had luck with Apple tech support or a Genius Bar visit for such things?
Any guidance or suggestions are much appreciated.

Problem solved by taking the new iMac and the LaCie disk to the local Apple Store. They verified the LaCie disk with Disk Utility (thankfully it passed) then wiped the iMac clean, reinstalled Lion (10.7.3), and loaded the latest TM backup. Everything needed transferred over, so I'm back in business. HURRAY! I am setting up a new external HD for the solitary TM backups, and a separate external HD for clones. And, I now have access to a secure server for temporary storage of critical client files in addition to manually copying critical documents to a flash drive frequently while working on them.

Stereo audio tracks missing - have mono track only

After recently downloading DV footage, I find that there is only a "mono" channel shown on the timeline. Several subsequent "test" takes and downloads continue to produce only the mono channel. Imported "aiff" files appear in timeline with stereo tracks, but material from my DV camera continues to only contain a single mono track. (All settings on camera have been checked and re-checked and appear OK)
Is there some setting in FCE HD that needs to be re-set? If so, where is it??
Any input/advice will be appreciated.

After recently downloading DV footage, I find that
there is only a "mono" channel shown on the timeline.
Several subsequent "test" takes and downloads
continue to produce only the mono channel. Imported
"aiff" files appear in timeline with stereo tracks,
but material from my DV camera continues to only
contain a single mono track. (All settings on
camera have been checked and re-checked and appear
OK)
Is there some setting in FCE HD that needs to be
re-set? If so, where is it??
Any input/advice will be appreciated.
"Mayday, Mayday" ! I've had my camcorder bench-checked for the stereo audio signals (it's operating fine), replaced the firewire cable between the camcorder and the iMac, and reloaded FCE HD. Test clips still show only a "mono" channel for audio - no stereo audio. Test clips made with a different camcorder produced the same results (mono channel only)
After downloading yet another test clip, the FCE HD software responds with the following message:
"The audio sample rate of one or more of your captured media files does not match the sample rate on your source tape. This may cause the video and audio of these media files to be out of sync. Make sure the audio sample rate of your capture preset matches the sample rate of your tape"
Is this why I am only seeing one (mono) audio channel ? Can anyone tell me what this means and how I should fix it ?

I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

The sound seems very faint but can here static on playback.

Hello, I have iMac from Oct, 2010 and have OS 10.6.7 and multiple users. Mail icon was accidently removed along with program. Mail 4.4 is on other users but when I reloaded software my user got Mail 4.3. Mail 4.3 did not work with latest OS. Ideas?Matt

Hello, I have iMac Itel i3, from Oct, 2010 and have OS 10.6.7 and multiple users.
About 3-4 days ago the Mail icon in dock had question mark and was accidently removed, along with program on my user. Oops.
1. Mail 4.4 is on other users and works fine, but for me it does not work and tells me V4.3 does not work with latest OS X.
2. I reloaded software from my user with original disks (Oct, 2010) and got Mail 4.3 again. Mail 4.3 did not work with latest OS. I am unable to load Mail. Gives Yellow error message.
" You have Mail version 4.3 (1081/1084). It can’t be used on Mac OS X Version 10.6.7 (Build 10J869). For more information, click the Help button."
3. Tried to update software and look for update for mail 4.3 on Apple site to no success.
Hate to go to MS-Entorage ( I may need to learn something new and alien) mail program since contracts are in Mail/Address Book.
Ideas?
MattDeeds

Matt,
I would download and run the 10.6.7 combo update.
http://support.apple.com/kb/DL1361
Regards,
Captfred

How can I download my iMac iTunes library to an external drive and reload the library to iTunes on a PC?

How can I download my iMac iTunes library to an external drive and reload the library to iTunes on a PC?

Hi Niel. Can you be move specific for those of us not tech savy? 1 - Can you provide steps to back up the library? 2 - How do you organize the library? 3 - When you move the entire iTunes folder, does it include iTunes paid for music along with downloaded music from CDs? Thanks

I reloaded my old iWorks 08 to my iMac's new hard drive. With a new Pages document, I can't see the cursor. You can type in text but it is in white only. Any thoughts?

Hi. I lost my iMac's hard drive and had a new one installed. I reloaded my old iWorks 08 software and then transferred my Pages documents from a portable HD to the iMac. The files open but the original text in them (they are journals) are in white against the white background. Plus I can't see any sign of the cursor. I can hi-lite the text and change its colour but never to black. Plus the photos I inserted along side the text are barely visible, as if they had been badly faded.
Any thoughts on this? Many thanks.
Richard

Richard,
You must run Software Update and bring your old iWorks 08 to the latest release for compatibility with the current OS.
Jerry

I replaced my hard drive and I backed up my files on an external hard drive but when I reloaded my iweb to my imac none of my files were on it so I can't make changes to my Published web site have I lost my files what can I do

I replaced my hard drive and I backed up my files on an external hard drive but when I reloaded my iweb to my imac none of my files were on it so I can't make changes to my Published web site have I lost my files what can I do

By default iWeb keeps its data in (user)/Library/Application Support/iWeb in a file named Domain. Without this file you cannot proceed (other than by recreating the site from scratch using the published version as a reference) so you need to locate it on the original disk.
To confuse matters, Apple have hidden the user’s Library folder in Lion and Mountain Lion to casual viewers, in an attempt to stop new Mac users messing their machines up. To access it, in the Finder go to the ‘Go’ menu and hold down the Option (Alt) key; the Library folder will appear as a choice.

I want to reload original software in IMAC G4 - i have original disks, can i install OSX first and then load "software restore 1 to 6" and not load OS9

I just purchased a used IMAC G4, cpu G4(1.1), powermac 4,2, 800MHz 15 inch FP and 55 Gig hard drive. I now have 750 k memory and it is working fine. i want to reload the original software. i have all original disks -CDs. These include OSX Install; OS9 Install; Software Restore 1 to 6 CDs; Imac applications.
Question, please, is which CD do i load first? Also i hope it is not necessary to load OS9. I would think OSX install first and then the software restore disks and then the imac applications?
Thanks.
Robert.

Boot from the disc labeled Disc One. Follow instructions and when you get to the part to select a Destination/Target drive click once on the drive then click on the Options button. Select the option for Erase and Install then click on the OK button and proceed.
You do not have to install OS 9. If you don't then you simply cannot use the OS X Classic emulator.
I believe there is a separate installer on Disc One for restoring pre-bundled software.

Imac blown up in electrical storm got a new one with no CD/DVD drive how do I reload my Adobe Photoshop Elements 9 and Adobe Premiere Elements 9 on iMac OS X 10.10.2

Imac blown up in electrical storm got a new one with no CD/DVD drive how do I reload my Adobe Photoshop Elements 9 and Adobe Premiere Elements 9 on iMac OS X 10.10.2

previous versions http://www.adobe.com/downloads/other-downloads.html

IMac G5 running OS 10.4.11. Started playing with a bluetooth speaker (may or may not be related). Now I cannot get past the blue screen on startup. I can get into safe mode. Tried install disc for disc utility and reloaded OS. Still get blue screen.

I have an older iMac G5 running OS 10.4.11. The other day I started playing with a bluetooth speaker (may or may not be related). Now I cannot get past the blue screen on startup.
I can get into safe mode. But no regular startup.
I tried disabling bluetooth, thinking that might be related. It didn't help.
I even tried using the install disc to run disc utility. That didn't work so I reloaded the OS.
But I still get hung on the blue screen when trying a normal startup.
All help would be appreciated.

Try resetting the PMU/SMU and PRAM/NVRAM. You'd need to identify the mode of resetting depending on the model of your G5 iMac. The Apple support sites that would help you for this are –
http://support.apple.com/kb/HT1436
http://support.apple.com/kb/HT1939
http://support.apple.com/kb/HT1767
http://support.apple.com/kb/HT1379
I hope this solves your problem.

Imac g5 reload os

Similar Messages

Maybe you are looking for