IMac g5 stalls on grey apple logo spinning gear screen, help please.

I hope someone can help, please.
I have an iMac G5 (without isight) and it doesn't want to startup. It stalls on the grey apple/spinning gear screen, with the spinning gear perpetually rotating. I've kept it on for at least twenty minutes and still nothing. Because, I've seen this screen stall when updating OSX before.
I've flashed the pram and the power management. I've also gone into single-user mode and done everything the apple support page has said: to no avail. I've tried to start in safe mode but I cannot.
I'm running max os x 10.4.10.
One other thing worth noting, the light on the bottom right of the iMac case goes on when powering up but fades out and goes dark by the time I reach the grey apple screen?!?!?! I think I remeber this light always staying on when the computer was on.
If anyone has any ideas on how to fix this, I would greatly appreciate it.
Thanks!

It could be that your power supply is failing, see if you qualify for Apple's power supply or video and power issues.
Please post back.

Similar Messages

My iMacG5 will only boot to white screen, gray apple and spinning gear. Help?

My iMacG5 will only boot to white screen, gray apple and spinning gear. Help?
Also not totally sure if it's an Intel based computer, but that's what I recall. Any way to check, since I can't get to About This Mac window?
It's running on OSX Leopard 10.5.4
First symptom = running slowly - then it kind of froze with color wheel spinning - thought a forced shut down would help - help power button til off, then white screen, gray apple and spinning gear.
Have tried...
1. Turn off the computer by choosing Shut Down from the Apple menu, or by holding the power button until the computer turns off.
2. Unplug all cables from the computer, including the power cord.
3. Wait 10 seconds.
4. Plug in the power cord while simultaneously pressing and holding the power button on the back of the computer.
5. Let go of the power button.
6. Press the power button once more to start up your iMac.
Then try booting from your install disc again.
- No change
And...
Booting From An OS X Installer Disc
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple logo
appears.
5. Wait for installer to finish loading.
- The fan just got louder.
Thanks for your help.

You need to do an Erase and Install or an Archive and Install depending on whether the hard drive is OK or needs to be reformatted.
Start by booting from your Leopard DVD. The rest is just following directions.
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

IMac randomly frozen at grey Apple logo screen.

Hi Guys,
I need your help.
My iMac randomly freezes at startup, at the grey Apple logo screen... some vertical black bars appears, the image is unclear and doubled. The round icon showing that the system is loading freezes. Some times, a black screen appears asking for the computer to be restarted.
I need to power off the iMac for 7-8 times and then it comes to normal till the next boot.
One time, a month ago, the same happened when I was already in leopard, but since then nothing. Now, in the last week, it's happening in 80% of the startups.
Any idea?
Thanks !!!
Andrei

1. Have you installed any third party RAM? If so try removing the third party RAM and install the Apple original RAM for testing.
2. Disconnect all external devices during testing. This means hard drives, ipods, printers, scanners, and hubs.
3. Boot to your install disk. Insert the install disk and hold down the "c" key at startup. Once it boots up select your language but instead of going through the install process go to the Utilities menu at the top select Disk Utility. Select your hard drive/Mac volume on the left then under the First Aid tab click Repair Disk. If that passes/repairs successfully Repair the Disk Permissions. Once this is finished go back to the Utilities menu, select Startup disk, choose your Mac OS X volume and click restart.
4. If you are still having issues insert your original gray iMac install disk, restart and hold down the "d" key. This will boot you to the Apple Hardware Test. Run the Extended test.
George

Macbook Pro will not boot past apple logo/spinning gear

Earlier this evening I was installing the aperture 3.0.2 and iMovie 8.0.6 updates onto my MBP and the system refused to install the Aperture update so I decided to shut down and restart the mac and when I saw the familiar Apple logo spinning I was distraught to see it would go no further. I then did what ay learned apple user would do and reset the PRAM and let it chime 4 times, just to be safe, and I restarted holding shift - the grey bar finished but it still would not load. I luckily have a Carbon Copy Clone of an old hard drive for this machine before I upgraded (much too outdated to copy back over - I would lose Final Cut Studio 3 and Aperture 3 etc...) which I was successful in booting into (and am using now) to do a disk utility > repair permission and repair disk. Both had no errors and I was sincerely confused. I attempted to boot it once more before I started to freak out. Needless to say I freaked out. I booted in single user mode and ran the checkdisk within that TWICE before typing exit and it did the rest of the verbose boot which then hung on "AirPort: RSN handshake complete on en1" This is the end of what I know to do - so with that I hand it off to you... any help is appreciated a and will definitely be attempted.
-Lucas

The drive had over 350GB available. Yes I suppose I would be able to but I am unable to locate one. If someone is certain a OS replacement install would fix things I am willing to go buy one...

MAC PRO FREEZES ON GREY APPLE LOGO START UP SCREEN.

My computer was acting funny for the last couple of weeks. It was slugish and slow to respond. When I was using it yesterday it froze up. I forced quit it and tried repeatedly to reboot. It makes the startup chime sound and gets to the grey apple logo screen then the spinning gear stops and it freezes.
My Specs:
2008 Mac Pro
OS X Lion 10.7.4
2 x 2.8 GHZ Quad-Core Intel Xeon
10 GB DDR2 Ram
NVIDIA GeForce 8800 GT 512MB
1) Tried starting from the Lion Recovery HD partition. Received the same result (freeze on grey logo).
2) Confirmed the OS Startup Drive works. I removed the OS Drive and tried it in a HD Dock on my Maybook Pro. The drive runs normally. I'm able to navigate and open files.
3) Tied starting from Lion Startup Thumb Drive. Received the same results (freeze on grey logo).
4) Confirmed the Lion Thumb Drive works. Booted Laptop from this same device with no problems.
Now I'm scared. I'm running out of ideas. I'm guessing it is probably something on the logicboard. Does anyone have any advice or suggestions to what it could be? Is there a way I can test the logicboard myself?
Thanks for any help in advance.

The array and the OS drive are not "linked."
Nor are the drives fixed to the drive bay order. One of the drives in the array is "master" that knows what is on each sybling by the ID of the drives.
Clone the OS and keep handy. Never a need to do an OS install.
Backup the array as often as needed so the data is current and have two sets there also, ie TimeMachine for hourly or something and cloned.
What does matter is the OS version the array was created with as there are changes even during the life of the OS like Lion and not usually backward - so an array created with Leo had to be recreated with Snow, and same with Lion, only Lion 10.7.0 and 10.7.4 one was buggy, the 2nd changed the rules for 32 vs 64-bit mode drivers.
Take away: keep the last OS around, hold back on updates, make sure that you keep 10.7.3 around after 10.7.4 is out and working.
You can boot off any drive, SSD or something else and still mount and access the array.

Macbook Won't Chime Or Boot Past Grey Screen W/ Apple Logo & Spinning Gear

So i took my Macbook into the apple store to get looked it, cuz i sensed it was a little too hot and maybe overheating........... I DJ so my Macbook is bascially used for that and that only, so after he ran a diagnostics he seen i needed a new fan, but they didn't have that fan in stock, so i went home.... Laptop still working fine until i went to boot it up and it didn't chime and was stuck on the grey screen with the apple logo and spinning gear. Does this indicate i need a new logic board or a new hard drive

Hi ds,
Sorry to hear you're having such trouble!
Unfortunately, the best thing you can do at this point is reinstall Leopard (and then attempt to install the combo updater, too). If you don't have a backup of your machine, you could boot it into Target Disk Mode (by holding down T at startup) and then attach it via FireWire to another computer to salvage your files.
I recently had to repair a machine with this exact same problem, and after messing around with that for several hours, I'd have to say that I think that an Erase and Install is the way to go. If you then migrate over your user data and start having troubles, you at least know where the problem lies. I suspect, though, that having a clean machine with all of the new updates applied will be the end of the issue.
Sorry to be the bearer of bad news. There are a few other things you could try first; you could, for example, manually download the relevant combo updater from Apple's website and attempt to install it to your damaged machine while it's in Target Disk Mode. If you have a copy of Disk Warrior, that too is certainly worth a shot (and in some cases may be the saving grace). In my experience, though, a failure of this magnitude isn't easy to resolve.
Hope that helps.
—Hazy

How can I re-start when stuck on apple logo/spinning gear page for HOURS???

I uploaded 12 updates at once and when I went to restart, it became stuck on the page with the apple logo and spinning gear. Left it for hours and hours but no change. I have removed the battery and re-powered. I've also tried to use the install Disc 1... Urgh! Any solutions?
Thanks, Dot

If you are uploading anything it should not affect your machine unless your computer coincidentally failed while doing so. I am going to assume you mean you downloaded 12 updates.
I also assume you mean that when trying to start it after having removed and the replaced all sources of power it still will only get as far as the apple logo with spinning gear.
Are you holding the C key while starting it with the install DVD inserted? That should cause it to boot from the DVD after which you can use Disk Utility to repair the disk or to re-install the OS if needed.

IMac stuck on Apple Logo + Spinning gear

I was having some pretty serious problems with my iMac, so I booted off the install CD and ran permission repair and disk repair. Everything seems to be OK now (SMART dhows "verified"), except that I cannot start from the hard drive. The iMac knows it's there and I can select it as startup disk (using either "option" startup or from within the install CD). I have no idea why it won't boot tho. The only think I can think is that I accidentally had my Leopard upgrade disk in once (the iMac came with Leopard) and double-clicked "install." I turned the iMac off before it booted though, so I would assume no harm done.
Any help? It's getting frustrating.
And yes, I've restarted with everything unplugged and have reset the PRAM.
EDIT: Restarted in Verbose mode and got a "disk0s2: I/O error" followed by some "Level 3" comments.
Message was edited by: Xian Rinpoche

Hi Xian Rinpoche;
Do you have a backup?
You stated; "I turned the iMac off before it booted though, so I would assume no harm done.
Shutting the computer off in the middle of an install has most likely totally corrupted your system.
You might try an Archive & Install. If this procedure can find enough of the system remaining it might be able to salvage a system for you.
If that fails then about your only other alternative is an Erase & Install. If you have no backup, this will cause you to lose everything.
Allan

Grey screen / apple logo / spinning gear

Hi problem as above....
Disconnected all items
Tried the install cd
Nothing
Computer sounds like it is trying to boot but won't
Tried to boot from disc
Currently using my touch to type this?
Help!
Alan (Ireland)

Edit: Oops. I just realized this post was 2 months old. I suspect you have moved on.
This sounds similar to a problem I was having this morning. It would be really useful if you could have a look at the system log (system.log) for any more clues. You can try to boot the machine into Single user mode to do this. I believe the key sequence during boot for this is to hold down the Command and S keys.
Once you find yourself at the "root" prompt, you should find the system.log at
/private/log/system.log
You can easily view the log without having to navigate from where you are with the following command:
cat /private/log/system.log | less
That vertical symbol before the "less" is the "pipe" symbol. You can see it on you backslash key.
Once the log comes up, you can navigate forward and backward through the log with the "F" and "B" keys. To exit, use the "Q" key.
The log can be confusing to read, but in my case I was able to see a section of errors that were repeating over and over.
In the end, for me, it turned out to be a permissions issue. Somehow, the root directory "/" had its permissions corrupted which made it so that one of the boot processes was unable to access a required file.
At this point I really don't want to give you a bunch of commands to try if you're not familiar with the system. I don't have enough information anyway. I'm just offering you another place to look for the problem. One thing that makes me think it's permissions related is that you said you can't reinstall the system. Neither could I, though I was attempting an archive and reinstall, not erase and reinstall. For the erase option, I wouldn't think permissions should come into play.
To reboot from the prompt, type: shutdown -r now
Good luck,
Kevin
Message was edited by: kpowick

My iMac won't boot up past the white screen with a grey apple and spinning icon

My iMac won't boot up past the white screen with a grey apple and spinning icon...please help!

command R did not result in anything different - still the white screen, etc. I do you Time Machine with and external hard drive, but I unplugged that. I have the installation DVD, but it doesn't seem to be reading it either.

Macbook won't boot past grey Apple logo.

Hello! My mother's unibody white MacBook will not get past the grey apple and spinning gear when you first boot up the computer. This was after she opened a link in an email from a friend who had her email compromised. Now I'm getting spam emails with the same link from my mother's hacked email, and her computer won't even get to the login screen. I took it to the genius bar only to be told it was likely HD failure, but the windows partition works without a hitch! What could this be? A trojan? Is there any way to retrieve data (really just pictures) before I attempt to reinstall OS X?
Thanks!

P.S. The one or two times it did get past the mentioned screen, it moved it horribly slow speeds. It took near an hour to get the spotlight feature to open!

IMac won't/doesn't start up - spinning gear and fans forever

Hi,
My iMac won't get past the Apple Logo/Spinning gear progress indicator. It started two days ago after I swapped out some USB devices (pulled my headset and inserted Photo card reader with an SD card in it) It didn't mount the SD card so I restarted. Wish I hadn't. It now will not complete start-up. I also get the jet-engine fans after about 30 sec (but I read this is normal). The only other thing I can think of that I have done recently that might be a problem was download some shareware games from www.macgamer.com which didn't install correctly and wouldn't run.
I have done everything I know or have found on this website. I have found a few posts where the problem looks just like mine, but none have posted solutions. (and a bunch with a similar sounding problem but always with some different detail).
Here is what I have done so far. After each of these a fresh reboot just hangs at the spinny thing:
- rebooted from the install DVD (it will do this), repaired both hard drive and permission several times each. Some pemissions were repaired but no repairs were made to the hard drive, it checked out OK each time.
- Ran the "Quick" hard ware test. Everything passed
- Reset the PRAM (or at least held down the PR+shiftCMd combo, not sure if that had any effect).
- tried to start in safe mode, but can't because after the second chime, it just hangs again at the Apple logo.
- Started in single user mode, ran fcsk twice (NO PROBLEMS FOUND) then did the steps from single user mode to delete cache and prefernce files found in this thread (http://discussions.apple.com/thread.jspa?messageID=1484205)
None of this has helped. Right now I see only two possibilities, Archive and Install or take it up the street to the Apple Store (really close, but its the first one in Portugal and the store has only been there for about 3 months, so I have to wonder if they know what they are doing).
Does anyone have any suggestions before I take either of these drastic steps? Which one should I do first?
iMac G5 Mac OS X (10.4.4) 1 Gb

thanks for the suggestions but I have tried both those. I can´t boot up in safe mode, because it simply doesn´t get that far, always getting stuck at the apple log/spinning thing, and the disc utilities (which I have now run several times) don't find any problems.~
I have now followed all the steps in the apple support "my computer won't start" guide (106464 or whatever it is called), which I was at first hesitant to do becasue that doc is for up to OS 10.3.9 and I am running Tiger 10.4.5 (or was running it before this happened, that is). Still nothing has helped.
However, I did make a discovery. After booting into single user mode and deleting/moving some of the preference files, as instructed in the above help doc, I tried to "boot the system in single user mode" (it tells you the command for that when you first enter single user mode). And after showing some start up codes, which go by really fast, but don't seem to show any errors, the screen displays three line of text, which I wrote down but don't have on me at the interennt cafe I am now forced to visit to get on this forum. The first two are the same and I can't remember exactly what they say, but the third says:
root user not found. sleeping and trying again.
It then sits for about 3 seconds and then displays the three lines again, over and over. I have let it go for upt ot 10 minutes. So does anyone know what that means, if that is the true problem or how to fix it without reinstalling? Let me repeat, numerous "repair disc" using disc utility and "fsck" in single user mode have not returned one single problem or error code since this problem started. Unfortunately I don't have disc warrior, but it has been ordered and is one its way.
iMac G5 Mac OS X (10.4.4) 1 Gb

About imac (early 2008 24") stuck on grey screen apple logo spinning wheel

HI all just wondering if any body has experienced the grey screen apple logo spinning wheel and also switches off and back on all by itself after 5-10 minutes in the past or recent.
how did you get on did you sort it?would like to read some feedback on this subject thanks

Generally that indicates a serious problem with the hard drive.
Power down, hold alt key at power on, what shows as boot choices?
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Report what happens or doesn't please.

Mac Stuck at Startup Screen with Grey Apple Logo,Empty Progress Bar and a Spinning wheel

Last night the electricity went out and my power surge protector was not working so my iMac just force shut downed.
So, when the electricity came back i turned on my Mac but it is *Stuck in the Startup/Boot Screen with a Grey Apple Logo,a Empty Progress Bar with stays for 1 or 2 minutes and a small Spinning Wheel which would Spin Forver! I Have tried the SMC and Pram reset but no use, i have also tried to insert my OS X Lion 10.7 Installation disk and it would not load if i hold the C Key in the Startup, I Have Managed to go to Disk Utility Through "Recovery HD" but the Volume "Macintosh HD" is Greyed out and Unmounted and i cannot repair it. There are some files that i'd like to Recover if there is a way to fix it without deleting files.
**PLEASE HELP ME FIX THIS!**
Details about the iMac:
iMac 21.5 Inch i think from Mid 2010,
OS X Lion installed maybe 10.7.2 or 10.7.3 (im not sure)

kernel
Grey screen with Metallic Apple and spinning gear
Sounds to me like your hard drive failed on you as a result of the power going out.
http://www.apple.com/support/imac-harddrive/
If your iMac is a Mid 2010 you qualify for the hard drive replacement program from Apple.
Apple has determined that certain Seagate 1TB hard drives used in 21.5-inch and 27-inch iMac systems may fail. These systems were sold between October 2009 and July 2011.
I hope I helped you with your problem.
- Brandon

My 2009 iMac gets stuck on the grey Apple logo when booting up. It boots correctly when in safe mode. I have tried erasing the HD and re-installing from a USB installer. It says the install is complete, but after restarting it gets stuck on the Apple log

My late 2009 27" iMac gets stuck on the grey Apple logo when booting up. It boots correctly when in safe mode. I have tried erasing the HD and re-installing from a USB installer. It says the install is complete, but after restarting it gets stuck on the Apple logo again. This could possibly be an HD failure, but then why does Safe Mode still work and the USB install not work? Any ideas?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1|head -1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

IMac g5 stalls on grey apple logo spinning gear screen, help please.

Similar Messages

Maybe you are looking for