Imac G5 takes long time to function after waking

After sleeping, my G5 takes a very long time to fully function again.
The screen wakes just fine, but as soon as I click on a window, I get the spinning beach ball and the cursor freezes.
It works fine again after about 5-10 minutes. (It sure feels like at least 10...scares the wits out of me every time.) It also seems to take an unusually long time to start up, now that I think of it.
Any help? Thanks!

Try using OnyX to clear out some of your caches, particularly your browser cache. How full is your drive? How much RAM do you have?
Try resetting your PRAM as well, please let us know what helped.

Similar Messages

Takes long time for shutdown after adding to domain

Hi,
Workstation OS - Window 7
Domain Controller OS - Window server 2008 R2 standard
Following thing i have measure with Stopwatch.
1) When the laptop is in workgroup, it takes just 17 second for shutdown.
2) when i added the same laptop in domain ( corp.abc.com ), now it takes 1minutes and 22 second for shutdown. ( it just show shutting down screen )
Why the shutdown time increased so much?
Do you have any idea?
Note:- i have not make any changes in laptop, nor added any software. I have done the above testing because user start complaining that after putting laptop in domain it takes long time for shutdown. It's happening to all laptop where the OS is window 7
There is no logoff scripts / gpo's as well as we don't have roaming profiles.
Please advice.
Thanks & Regards,
Param
www.paramgupta.blogspot.com

Hi,
To troubleshooting this issue, please install Windows Performance Tools (WPT) Kit. The Windows Performance Tools (WPT) Kit contains performance analysis tools, and is designed for analysis of a wide range of performance problems including application start
times, boot issues, deferred procedure calls and interrupt activity (DPCs and ISRs), system responsiveness issues, application resource usage, and interrupt storms.
To get the installer, you have to install the Windows 7 SDK.
Microsoft Windows SDK for Windows 7 and .NET Framework 3.5 SP1
http://www.microsoft.com/en-us/download/details.aspx?id=3138
For shutdown tracing:
Run command:
xbootmgr -trace shutdown -noPrepReboot -traceFlags BASE+CSWITCH+DRIVERS+POWER -resultPath C:\TEMP
Collect logs and post them for further troubleshooting.
For more information please refer to following MS articles:
Long Shutdown Time on Windows 7 Ultimate x64
http://social.technet.microsoft.com/Forums/en/w7itproperf/thread/11a42a93-efd2-4184-9ce8-bbc1438b7ea6
Long shutdown time on Windows 7 64 bit laptop
http://social.technet.microsoft.com/Forums/en-US/w7itproperf/thread/4440fc6e-c81e-440c-9183-9b7e176729d2
Lawrence
TechNet Community Support

XI - J2ee takes long time to startup after SP19

Hi everybody,
we have patched our XI development system to SP 19; during startup of j2ee it takes a long time in registering method in com.sap.security.core.server.vsi.service.jni.VirusScanInterface....about 10 minutes!
Here follow an extract of dev_server0 tarce file:
JHVM_BuildArgumentList: main method arguments of node [server0]
[Thr 3600] Wed Jan 24 15:10:14 2007
[Thr 3600] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
[Thr 3600] JLaunchISetClusterId: set cluster id 5501650
[Thr 3600] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
[Thr 3600] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
[Thr 31100] Wed Jan 24 15:10:48 2007
[Thr 31100] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver
[Thr 31100] JHVM_RegisterNatives: registering methods in com.sap.mw.jco.util.SAPConverters
[Thr 31100] JHVM_RegisterNatives: registering methods in com.sap.mw.jco.util.SAPCharToNUCByteConverter
[Thr 31100] Wed Jan 24 15:10:50 2007
[Thr 31100] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.engine.Compress
<b>[Thr 25960] Wed Jan 24 15:11:02 2007
[Thr 25960] JHVM_RegisterNatives: registering methods in com.sap.security.core.server.vsi.service.jni.VirusScanInterface</b>
[Thr 3600] Wed Jan 24 15:21:40 2007
[Thr 3600] JLaunchISetState: change state from [Starting (2)] to [Starting applications (10)]
[Thr 23390] Wed Jan 24 15:24:40 2007
[Thr 23390] JLaunchISetState: change state from [Starting applications (10)] to [Running (3)]
Is there any way to speed up this process? or to deactivate the virusscaninterface service? What can I check to understand what happens during the registering method of VirusScanInterface?
We are using XI on AIX platform, version 5.3 ML5 with Oracle database.
Thanks in advance.
Best regards.
Tiziano

Hello there, mabaaref.
The following Knowledge Base article provides some great information in regards to battery functionality:
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
It's important to note that if the battery is extremely low on power, your device may display a black screen for up to two minutes before one of these images appears. Continue charging for at least 30 minutes, or until your device is fully charged.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

IPhone 6 take longer time to charge after upgrading to ios 8.2

Did someone have the same problem with me? After updating to ios 8.2, time taken to fully charge the battery seem longer than usual. Usually, it take roughly about an hour to charge from 10% to 100% but now it take nearly 3 hour. I have try to pull out the charging cable when the battery reach 96% and then plug in back after a few second. The battery percentage shows 100% after i plug in the charger. Is there something wrong with the system or the battery?

I have this problem too. My iphone isn't recognizing ANY charger after upgrading to 8.2

Lenovo Services/Program takes a long time to start after bootup

It seems like Lenovo services take a long time to start after boot up is completely done.
My Bootup time is less than a minute (0:51s), but my lenovo services (Power Manager Gauage, Lenovo Services in the Sidebar, have th ThinkVanatage Button work, and most annoying of all is having access to my network card to change networks) takes about 2 minutes.
Is there a reason why this is taking so long?
I've uninstalled and installed the lastest Lenovo Interface Driver, and a lot of ThinkVantage/Lenovo software and drivers.
Any ideas?

No response?
Anyone else on T400 notice this?

Delete Index in Process Chain Takes long time after SAP BI 7.0 SP 27

After upgrading to SAP BI 7.0 SP 27 Delete index Process & Create index process in Process chain takes long time.
For example : Delete index for 0SD_C03 takes around 55 minutes.
Before SP upgrade it takes around 2 minutes to delete index from 0SD_C03.
Regards
Madhu P Menon

Hi,
Normally index creation or deletion can take long time in case your database statistics are not updated properly, so can check stat after your data loading is completed and index generation is done, Do creation of database statistics.
Then try to recheck ...
Regards,
Satya

I have the current Mac Pro the entry level with the default specification and i feel some slow performance when applying after effects on my videos using final cut pro and also rendering a video takes long time ? what upgrades do you guys suggest?

i have the current Mac Pro the entry level with the default configuration and i feel lack of performance when applying after effects on my videos using final cut pro and also rendering a video takes long time ? what upgrades do you guys suggest i could do on my Mac Pro ?

256GB SSD it shipped with will run low and one of the things to watch.
Default memory is 12GB also something to think about.
D500 and FCP-X 10.1+
http://macperformanceguide.com/index_topics.html#MacPro2013Performance
Five models of 2013 Mac Pro running Resolve, FCPX, After Effects, Photoshop, and Aperture

Why it takes long time to shut down after i upgrade to OS X ver 10.8.2?

why it takes long time to shut down after i upgrade to OS X ver 10.8.2?

Can't really say, but I see this occurring on all of my Macs since the 10.8.2 update and keep reading about it at several other Mac user boards.
Bottom line: it's a general problem, but more of an inconvenience, than a serious problem. Probably will be solved with the next update.

SL takes longer time to start up and shut down after "IceClean".

Greetings,
After "IceClean" (both maintenance and cleanup), SL seems (obviously) to take longer time to start up and shut down.
Any idea why and how can I resolve it?
Thank you so much.
Cheers.

Hi,
I've finally able to solve the problem. The problem was due to start up item. There were 2 trial application (expired long ago) in the folder. After clearing the application, start up and shut down are fast as light.
I think I've "awaken" the start up application after "IceClean" as IceClean has deleted their log file or something like that and therefore the applications have to run again.
In order to be fair to IceClean, it is my fault to be blamed.
Thanks again.
Cheers

BPM Process chain takes long time to process

We have BI7, Netweaver 2004s on Oracle and SUN Solaris
There is a process chain (BPM) which pulls data from the CRM system into BW. The scheduled time to run this chain is 0034 hrs. This chain should ideally complete before / around 0830 Hrs. <b>Now the problem is that every alternate day this chain behaves normally and gets completed well before 0830 hrs but every alternate day this chain fails</b> there are almost 40 chains running daily. Some are event triggered (dependent with each other) or some run in parallel. In this, (BPM) process chain, usually there are 5 requests with 3 Delta and 2 full uploads (Master Data). The delta uploads finishes in 30 minutes without any issues with very few record transfers. The first full upload is from 0034 hrs to approximately 0130 hrs and the 2nd upload is from 0130 hrs to 0230 hrs. Now if the 1st upload gets delayed then the people who are initiating these chains, stop the 2nd full upload and continue it after all the process chains are completed. Now this entire BPM process chain sometimes takes 17 -18 hrs to complete!!!!!
No other loads in CRM or BW when these process chains are running
CRM has background jobs to push IDOCS to BW which run every 2 minutes which runs successfully
Yesterday this chain got completed successfully (well within stipulated time) with over 33,00,000 records transferred but sometimes it has failed to transfer even 12,00,000 records!!
Attaching a zip file, please refer the 21 to 26 Analysis screen shot.doc from the zip file
Within the zip file, attaching Normal timings of daily process chains.xls the name explains it.
Also within the zip file refer BPM Infoprovider and data source screen shot.doc please refer this file as the infopackage (page 2) which was used in the process chain is not displayed later on in page number 6 BUT CHAIN GOT SUCESSFULLY COMPLETED
We have analyzed:--
1)     The PSA data for BPM process chain for past few days
2)     The info providers for BPM process chain for past few days
3)     The ODS entries for BPM process chain for past few days
4)     The point of failure of BPM process chain for past few days
5)     The overall performance of all the process chains for past few days
6)     The number of requests in BW for this process chain
7)     The load on CRM system for past few days when this process chain ran on BW system
As per our analysis, there are couple of things which can be fixed in the BW system:--
1)     The partner agreement (transaction WE20) defined for the partner LS/BP3CLNT475 mentions both message types RSSEND and RSINFO: -- collect IDOCs and pack size = 1 Since the pack size = 1 will generate 1 TRFC call per IDOC, it should be changed to 10 so that less number of TRFCs will be generated thus less overhead for the BW server resulting in the increase in performance
2)     In the definition of destination for the concerned RFC in BW (SM59), the Technical Setting tab says the Load balancing option = No. We are planning to make it Yes
But we believe that though these changes will bring some increase in performance, this is not the root cause of the abnormal behavior of this chain as this chain runs successfully on every alternate day with approximately the same amount of load in it.
I was not able to attach the many screen shots or the info which I had gathered during my analysis. Please advice how do I attach these files
Best Regards,

Hi,
Normally index creation or deletion can take long time in case your database statistics are not updated properly, so can check stat after your data loading is completed and index generation is done, Do creation of database statistics.
Then try to recheck ...
Regards,
Satya

Photo both takes long time to open, what can i do?

photo both takes long time to open, what can i do?

SO do you think we can get a aunser? i just bout my imac u know!!

I haven't used my desktop iMac in a long time and can't get pass the opening login...I thought I remembered my password, but, apparently not. How do I change it. I don't THINK I have a "master password" on the thing. I've never used one on any of

I haven't used my IMac in a long time and went to boot it up, and I find I don't remember the correct username and password (I use several computers..I try to keep the passwords similar, with a number for the chronological order in which I started using them) I've tried all the others I use for passwords. The 'hint" keeps coming up for the password I am pretty sure is the correct one, but, still cannot get in. I also don't remember whether I changed my surname on the computer...it was changed legally a little while ago, but some of my older devices still have my birth-name in there)
HELP
I don't think I ever set up a "master password" on the thing...I never use those. I am the only person with access to my personal devices.
thanks

Forgot Your Account Password
For Lion, Mountain Lion, or Mavericks
    Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     When the menubar appears select Terminal from the Utilities menu.
     Enter resetpassword at the prompt and press RETURN. Follow
     instructions in the dialog window that will appear.
     Or see:
       Reset a Mac OS X 10.7 Lion Password
       OS X Mountain Lion- Reset a login password,
       OS X Mavericks- Solve password problems,
       OS X Lion- Apple ID can be used to reset your user account password.
For Snow Leopard and earlier with installer DVD
     Mac OS X 10.6- If you forget your administrator password,
     OS X- Changing or resetting an account password (Snow Leopard and earlier).
For Snow Leopard and earlier without installer DVD
    How to reset your Mac OS X password without an installer disc | MacYourself
    Reset OS X Password Without an OS X CD — Tech News and Analysis
    How To Create A New Administrator Account - Hack Mac

SSRS 2012. ReportServer takes long time to be up.

SSRS 2012 Sp1
Hi guys,
I am using SSRS as my reporting platform, but I have always got the following issue.
SSRS ReportServer takes time to load.
The first time takes long, then less time but only if the ReprotServer web page is continuosly retrived.
HERE the problem:
If the ReprotServer page is not used after a short time (let me say 10 min), the page takes long time to be up again.
I have checked the configuration that is set as for default 12 hours.
Is there a way to speed up the ReportServer opening page time?
Thanks for your help

Hi Fasttrack2,
According to your description, you want to optimize the performance of your report. Right?
In this scenario, when your report page is not active for a short time, it will take long time to render again. This is because the you have the report timeout. You can select "Do not timeout report" in Processing. Please refer to the link below:
SQL Server Reporting Services – Timeout Settings
For the performance issue, it can be many reason cause the report running slowly. Please refer to the articles below to optimize the report:
More tips to improve performance of SSRS reports.
Reporting Services Performance and Optimization
Troubleshooting Reports: Report Performance
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

RFC takes long time to reach to test

Hi,
i have issue related to RFC connection from BW to R3 systems
if i tried to test the connection it takes long time to respond
the result as following:
Logon     32779 msec
Transfer of 0 KB     1 msec
Transfer of 10 KB     2 msec
Transfer of 20 KB     3 msec
Transfer of 30 KB     4 msec
and if i tried after that to do the same test again it works fine
and the result as following
Logon     8 msec
Transfer of 0 KB     1 msec
Transfer of 10 KB     2 msec
Transfer of 20 KB     3 msec
Transfer of 30 KB     4 msec
So can you please tell me why it takes too long time to logon first time?
from the OS level i can ping the target system with out any problems.
Thanks
SE...
Edited by: Sherif Eid on Aug 17, 2008 4:33 PM

probably
1.Check both the systems are on same domain.
2.Check in your SM59 ,you have mentioned gateway and gateway host .if yes try to remove and check else revert back
3.under special options check slow rfc connection if it is already checked try to unchecked and if not try to check it.
4.Is the background user aleremote for BW-R3 connectivity?If not can you check the user and it's roles?
5.attach the routetrace from BW server to R3 and see how long does it take fto reach there first time and second time and see the difference?
Good Luck.
Thanks
Amit

It takes long time to load the parameter's value when running we run report

Hi,
It takes long time to load the parameter's value when running we run report. What could cause this? How to troubleshoot the behavior of the report? Could I use Profile and what events should i select?
Thanks

Hi jori5,
Based on my understanding, after changing the parameter, the report render very slow, right?
In Reporting Service, the total time to generate a report include TimeDataRetreval, TimeProcessing and TimeRendering. To analyze which section take much time, we can check the table Executionlog3 in the ReportServer database. For more information, please
refer to this article:
More tips to improve performance of SSRS reports.
In your scenario, since you mention the query spends less time, the delay might happens during report processing and report rendering section. So you should check Executionlog3 to check which section costs most of time, then you can refer to this article
to optimize your report:
Troubleshooting Reports: Report Performance.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu

Imac G5 takes long time to function after waking

Similar Messages

Maybe you are looking for