Imac G5 (third generation) will not continue start up

Hi all,
Hope someone out there can help me out with my imac.
I've got an imac G5 (third generation), the model just before the intel based imac came out.
I had just done a mac os X software update (the most recent), then my computer re-started (without warning). This re-starting got to be a loop. imac kept re-starting out of itself. When I tried shut down, the imac would shut down and start again and again. So, I finally used the power button in the back to shut my computer.
Now, my computer starts up untill the Mac os x window comes up, but it will go no futher. As if it refuses to update or something. The blue line that you normally see when this window pops up will not start up.
I've tried unplugging the power cord and then holding the power button while plugging it back in. Then pressing the power button again. Still the same thing happens.
What else can I try?

You certainly can delete the files, but look in them to make sure there's nothing that didn't get carried over that you might need.
I would recommend you try using the 10.4.10 combo updater, which will remove corrupted prefs from previous downloads. Give it a try and please post back.

Similar Messages

  • My MacBook Pro turns on and only shows a folder with a question mark and blinks.  The computer will not continue start-up. Suggestions/Advice?

    I'm not sure how this screen is appearing, but I tried powering up my computer this morning and it immediately presents a grey screen, then displays a blinking folder with a question mark in the middle of it.
    I am looking for troubleshooting advice and procedures to bypass this screen and allow my computer to complete it's start-up.
    Thanks-
    Gary D. Aston, Jr.
    [email protected]

    The folder with a question marks is usually an idication that the Mac can't find the system file to boot from.
    Since you never told us which system your Mac was running there is nothing more to say.
    Allan

  • Windows 7 pro lightroom 4 and 5 are locking up at start up. will not continue past the blue window

    windows 7 pro lightroom 4 and 5 are locking up at start up. will not continue past the blue window of lr5

    Hi,
    I would like to know if the backup program has been uninstalled?
    I suggest updating your graphic card driver from manufacturer's site and scanning the computer with your security software. Also test the issue in
    Clean Boot. If possible, try to reinstall problematic games.
    Best Regards,
    Niki
    Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • I started to download OS X Maverick and then I paused download I went to resume download and now it will not continue downloading any advice

    I started to download OS X Maverick and then I paused download I went to resume download and now it will not continue downloading any advice

    First read Mac App Store: How to resume interrupted downloads
    Open the Mac App Store.
    From the Store menu, choose Sign In.
    Enter your Apple ID and password.
    Click Purchases to get to your Purchases Page.
    Click the Resume button next to the app name.
    Also read: Troubleshooting the Mac App Store

  • TS3297 Just rented a movie in French on my iMac... movie will not start after download ?

    Just rented a movie in French on my iMac... movie will not start after download ?
    What I do now ?

    Okay. I'd report the problem to the iTunes Store. 
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

  • 21in. imac running Mountain Lion will not start just get grey no entry sign

    21in. imac running Mountain Lion will not start just get grey no entry sign

    David,
    Please carefuly read what Apple says in how to troubleshoot this issue. Also PLEASE complete your profile,we don't even know what iMac you have or the version of OS X it is running.
    Gray screen appears during startup

  • The computer says that my flash players is out of date, so I tried to update,   The download starts by stops at 25% and will not continue.

    the computer says that my flash players is out of date so I tried to update.  The download starts by stops at 25% and will not continue.

    Had the same problem (stalling at 25% or 30%).
    This worked for me:
    1.     Reboot computer or use Activity Monitor to force quit any prior Adobe Flash installation process that may be still running
    2.     Download Adobe Flash update using this link (assuming you are using Safari or Firefox): Flash Player for Safari and Firefox - NPAPI 
    3.     Mount flash player by clicking on flash drive icon on desktop
    4.     Right click on Flash file
    5.     Choose 'Show Package Contents'
    6.     Open 'Contents' then 'Resources'
    7.     Run file 'Adobe Flash Player.pkg'
    8.     Reboot computer.

  • IPod Classic 5th generation will not sync with new MacBook

    I have had a 5th generation iPod classic that I have been super happy with.  I have used it with several PC laptops.  Because I have gone through so many PC's, I decdied this year to get a new MacBook Pro.  Since my old PC was dying it took forever to get all my music and videos transferred to my new MacBook. Anyhow, I have had no luck syncing my iPod with my new MacBook.  I have read several other posts (but mostly older like 2007-2010) that others have had similar problems.  Here is a quick list of what I have done/what has happened:
    Initially, I would get one of two messages:
    'The ipod '(My Name) ipod' cannot be synced. An unknown error occurred (-124)'
    - 'The ipod '(My Name) ipod' cannot be synced. The required folder cannot be found.'
    Two times it told me I needed to use a USB 2.0 port (but I have a new MacBook and was using the newer 3.0 port).  I haven't seen that message since.
    It actually "transferred" over 4500 of my 7000 items (I have a ton of music that I use for my job) and then just stopped. When it was disconnected only about 200 songs were actually on my iPod.
    I've restored it several times.
    Seems to "freeze" on random songs or videos and will not continue to sync, even theough the iPod says it's syncing.  Then iTunes freezes.  I have to "force quit." Sometimes (but not all the time) if I try to re-open iTunes, I get a message that says iTunes is locked.
    I thought maybe my cable was bad (it was the original that came with the iPod).  I actually spent $20 and got a new one.  No luck. 
    With the new cord iTunes now gets frozen on the 3rd or 4th song it is trying to transfer. Once I disconnect the iPod (I have to disconnect with ejecting because iTunes is frozen and it also freezes up Finder to eject) my iPod makes an awful click sound and I have to start it by toggling and then holding the play/pause button.
    I have tried enabling disk, manually controlling music, etc. but nothing helps.
    I am sick about it because I rely on my iPod a lot for my job-- and I can't afford a new one since I just bought a MacBook.  I think it has something to do with the fact that I got this new MacBook.  My old PC was getting so sensitive that I didn't download the latest version of iTunes (but I still had the second latest version).
    Any help is appreciated.

    Although you used the new USB 3.0 port, the actual connection speed is still USB2.0, as the iPod Dock connector, does not have the 10 times faster USB3.0 signal pins, the connection speed is still 480Mbits/s
    I assumed that you have tried the other USB 2.0 port to no success..
    Can you do the iPod Disk diagnostic as posted earlier by tt2, it wont fix your problem, but helps in troubleshooting.
    Have a nice day!

  • I am trying to update to iTunes 10 to us my new iPad, but I can not remove a corrupted "apple software update" program... I can get everything else off, but due to "previous version" of software update it will not continue.

    I am trying to update to iTunes 10 to us my new iPad, but I can not remove a corrupted? "apple software update" program... I can get everything else off, but due to "previous version" of software update it will not continue.
    I stopped in to see one of the genius at the local store who referred me to "Windows Installer 4.5 Redistributable" (I am trying to install it on a Windows XP System)
    The last version on iTunes on my PC was iTunes 7.
    Thanks for your help,
    Julia from Woodridge

    Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
    Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
    If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Apple Software Update entries and click "Remove".
    Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
    (If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

  • My numbers application will not continue an update and will not open due to said incomplete update

    My numbers application will not continue an update and will not open due to said incomplete update

    open the application "LaunchPad" then locate Numbers.  Click and hold on Numbers until is starts to shake.  click the "X" in the top left corner.  click on the desktop to exit this mode.  Now open the App store and install again.

  • My ipad 1st generation will not locate wi-fi networks.  i have reset and have done router reseting, still nothing.  any suggestions?

    my ipad 1st generation will not locate wi-fi networks.  i have reset and have done router reseting, still nothing.  any suggestions?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • My home imac has crashed and will not boot up.

    Hi
    My home imac has crashed and will not boot up and I'm not sure where to start.
    It wouldn't shut down properly so I turned off the power, and now it won't go beyond the apple logo and timeer when I try to restart it.
    It is an imac (4 years old), Intel, running OS X, not sure which version, but probably the latest.
    Thanks
    Carol

    I would first reset the SMC:
    Shut down and unplug the Mac.
    Keep the Mac unplugged for at least fifteen seconds.
    Plug the Mac back in and do not turn it back on for at least five seconds.
    Press the power button to turn the Mac back on.
    Then I would reset the PRAM by rebooting the iMac while simultaneously holding the Command-Option-P-R keys until the machine restarts a second time.
    Let us know if these two procedures don't solve the problems.
    Hope this helps

  • My macbook pro froze last night and I held the power button down to restart the computer. Now the computer will not even start up. Any ideas what may have happened?

    While searching the internet last night my Macbook pro froze up and would not respond to anything. I restarted the computer and now the computer will not ecen start up. It will go to the gray screen with the apple sign. It is there working for 10 seconds and finally shuts down again. Any ideas how to get the computer to come back to life?

    Go step by step and test.
    Start up in Safe Mode.
    http://support.apple.com/kb/PH14204?viewlocale=en_US
    Repair Disk
    Steps 2 through 8
    http://support.apple.com/kb/PH5836

  • The backlight on my ipod touch 3rd generation will not come on, but everything works perfectly. I even used the advice given on the tech support page, and it still will not come on. HELP ME PLEASE.

    The backlight on my ipod touch 3rd generation will not come on, but everything else is working fine I even took the tech support advice by plugging it in and resetting it, but that didn't fix the issue either. I need help.

    If not this:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem.
    Also heating sometimes works. See:
    Why can't I select my wifi settings?
    A trick that works frequently with iPhones:
    Settings > AirPlane Mode ON, Do Not Disturb ON
    Power down and wait 5-10 minutes
    Power up
    Settings > AirPlane Mode OFF, Do Not Disturb OFF
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar
    Then:
    Does the iOS device connect to other networks? See other networks? If yes that tends to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • I downloaded the latest version of itunes and now my ipod nano won't sync.  The sync process appears to be locked up on the 2nd song and will not continue to sync.  I unchecked the 2nd song so a different song would be 2nd, no benefit; reset my ipod nano;

    I downloaded the latest version of itunes and now my ipod nano won't sync.  The sync process appears to lock up on the 2nd song and will not continue to sync. I let it run all night the first time and it never went past the 2nd song.  I unchecked the 2nd song so a different song would be 2nd, no benefit; reset my ipod nano; shut down laptop and restarted a different time; shorted the number of songs to sync; all without benefit. 

    When you connect your ipod up to the computer. It should show the device, usually with the name of the device, in my case 'jordan's ipod'. This should be on the row which shows 'songs', 'albums' e.t.c on the far right. There when you click on it it should go to a different screen showing a picture of your ipod along with two buttons - Update and Restore. Click update and it should take a 2 mins while your ipod is updated to the latest version of Ios.
    After updating te ipod see if there is a change in results.
    PS: make sure the device is active while syncing so keep tapping the screen.
    Sorry for any incorrect info, i have an ipod touch, but i've had experience with an ipod

Maybe you are looking for

  • Buffering and Cam Playback issues

    Hi, I am having real trouble with videos that use Flash Player and also when viewing cams that also use Flash. When watching videos they will only play for a few seconds before having to buffer which makes trying to watch any Flash video a nightmare.

  • Transitions no longer works in 4.0.1

    After updating PP 4.0.0 to 4.0.1 my transitions between still images is no longer working. Is there a solution for this issue?

  • Recovery Problem

    I have a Dell Latitude X200 laptop (with Windows XP Pro) and a Zire 31.  My use of the Zire is restricted to its Calendar and Contacts features.  On April 29 the Palm data on the Dell was seriously corrupted.  The Zire has not been HotSynced for over

  • Search Results Are Highlighted Within The Text Box? How ? Access 2013

    Hi Every one , Below I am describing some coding issue in VBA-MS Access I am facing right now , and I hope u guys could help me resolve the issues : DB : MS access 2013 - RichTextBox In A Form - Language : VBA Problem In short : struggling to highlig

  • Problem Moving XCode Project From iMac to MacBook

    I have been working with an Objective C library for iPhone apps using XCode on a iMac running OS X Lion 10.7.5 (11G63). My project builds fine on this system. I need to relocate the project to a MacBook Pro running OS X 10.8.4 (12E55). I have XCode 4