IMac G5 with new Seagate 250 won't boot with 10.4.8

I had to replace the original Maxtor 250 GB drive in my iMac G5 (17") today. It used to work perfectly with upgrade 10.4.8. But, the computer now fitted with a Seagate Barracuda 250 GB won't boot after 10.4.8 is installed. It does boot with the Tiger original install from the DVD. Something in the upgrade corrupts the drive. Maybe it is this specific drive, I don't know. There are errors reported by Disk Utility when I run it from the Tiger DVD after I've installed the 10.4.8 upgrade (from the web).
Did that happen to someone else ?
Zague
PB G4 17 (1.33) | iMac G5 17   Mac OS X (10.4.8)  

Welcome to the Apple Discussions!
This will probably solve the problem!
===================
| Repair the Disk Permissions: |
===================
-Search your installation DVD's.
-Insert the disc 1 and sthut down your Mac
-Start your Mac again while holding down the C key
-Now your Mac should boot from the CD, this can take some time.
-After a while you will see a installation screen where you can chose a language.
-Chose English and continue.
-Then click some time's next and agree with the "Software Agreement".
-Open Disk Utility. Top menu bar --> Utilities --> Open Disk Utility.
-Select your hard disk in the list of disks and volumes on the left side
-Go to the First Aid (tab somewhere on the right).
-Click the button to verify the permissions.
-Then Click the button to repair the permissions.
-Exit the Disk Utility and the installer.
-Restart your Mac
Hopefully this is helpfull or solved your problem.
Please see the "helpfull" and "solved" button's on top off this message! Apple: Why reward points?

Similar Messages

  • IMAC will work with 3GB RAM but won't boot with $GB RAM

    I have a 20inch iMAC and it came with 1 GB RAM. I received 4 GB of RAM and did the upgrade. But I found that unless I had the original 1 GB RAM in either slot, the computer would turn on the fan, but never the screen and it would never boot. If I put the original 1 GB RAM in one slot and one of the new 2 GB RAM in another slot, it would come up and recognize 3 GB of RAM. I tried out both my 2 GB RAM and they both worked (to rule out bad RAM). But once I had both 2 GB RAM in the computer I run into trouble. This computer supports 4 GB of RAM according to the book and the new RAM says it is the right kind (Kingston 4 GB kit PC2-6400 for 800/667/533 MHz. I need the 667, so I should be good to go. Can you replace the original 1 GB or does that original RAM have something to allow the computer to boot? I have the latest MAC OS X updates....

    Okay I did get around this and got my iMAC working. It cost me an extra $92 dollars, but it was still cheaper than buying the 4 GB from the APPLE store.
    I exchanged my 800 MHZ backward compatible to 667 MHZ Kingston 4 GB kit for a PNY 4 GB kit that is meant for 667 MHZ and not just backward compatible.
    http://www.bestbuy.com/site/olspage.jsp?skuId=8725427&st=memory&lp=3&type=produc t&cp=1&id=1201306785090
    I installed this and my computer came right up and says it has 4 GB of memory when I do the Apple->About this computer. It seems to work fine now.

  • New ipod touch won't work with itunes 10.6.3 says it needs 11.1 but I cannot load that on my macbook using OSX 10.5.8 any way around this?

    New ipod touch won't work with itunes 10.6.3, says it needs 11.1 or newer but I cannot load that onto my MacBook running on OSX 10.5.8 - is there anyway around this?

    No. If your MacBook has an Intel processor you can update to OSX 10.6.8 and then install the latest iTunes.
    A 5G iPod with iOS 7 requires that if you have a Mac you have OSX 10.6.8 or later.
    You can get 10.6.8 here:
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

  • New iPod Touch won't sync with computer - have latest version of iTunes and Snow Leopard. Computer won't even acknowledge the iPod.

    New iPod Touch won't sync with computer - have latest version of iTunes and Snow Leopard (10.6.8). Computer won't even acknowledge the iPod. Have restarted both, changed ports, etc. What's do I need to do?

    Have you tried here:
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    Do not forget the Additional Information topic.

  • Macbook pro won't boot with two new 4GB RAM sticks.

    I have a mid 2010 Macbook Pro. It came with two 2GB RAM sticks. After downloading Lion, my computer started to get sluggish so I thought I would upgrade the ram. I bought two 4GB Corsair RAM sticks and tried to install them. My computer will boot up if I install one of the new 4GB sticks and leave an old 2GB stick; but it won't boot with both of the new 4GB sticks. Any ideas?

    rdsvs wrote:
    all specs are the same. old and new has code as below
    pc2-5300 ddr2 667 200pin
    Unless I misread your reply, that is not quite accurate.
    Late 2008 Macbooks uses DDR3 1066MHz 204 PIN.
    Late 2011 Macbooks uses DDR3 1333MHz 204 PIN.
    Late 2012 Macbooks uses DDR3 1600MHz 204 PIN.

  • G62-234DX replaced hard drive with new Samsung 250 GB. Same size as installed.

    G62-234DX  Hard drive dead.  I replaced hard drive with new Samsung 250 GB. SATA II hard drive and used the recovery Windows 7 Home edition DVD.  Error message appeared after windows loads files and starts windows from the recovery DVD.  An error dialog box opens after completing and indicates, This computer is not supported by the recovery discs.  You will not be able to continue to recover this system with these discs.  error: 0100-1425 -3627-3628-3623-3624.   Hit OK and system powers down. 

    Hi:
    If you purchased the recovery disks from HP, please see if making and running this first helps.
    "CyberLink Recovery Discs utility resolves an issue where Recovery Discs sent from HP do not work on a new hard drive."
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-80183-1&cc=us&dlc=en&lc=en

  • Elements 13 won't work with new camera, it won't update to raw 8.7.1

    Elements 13 won't work with new camera, it won't update to raw 8.7.1. I have downloaded the patch, it is installed but the old version is this there in elements. Thanks, esther

    OK I think the problem is probably related to the platform swap and you may need your account re-set. Only Adobe staff can do that.  You need to contact Adobe directly using the link below. Use the dropdown menu for boxes (1) & (2) to scroll down the list and choose:
    1. Adobe Photoshop Elements
    2. Adobe ID, and signing-in
    3. Click on the blue button: Still need help? Contact us – then click the area marked chat 24/7, then click “start chat ”
    It’s usually possible to start a live chat, if an Adobe agent is free, and often to get the problem fixed right away. Have your serial number and previous case number available. The agent can directly troubleshoot your system if you agree to activate the Adobe Connect add-on.
    Click here to get help now Contact Customer Care

  • My new wireless keyboard won't pair with my mac book pro 10.6.7

    my new wireless keyboard won't pair with my mac book pro 10.6.7

    So are you saying that it does appear in the Bluetooth browser and after selecting it and then entering the passcode the keyboard fails to pair?

  • PowerMac DP G4 Won't Boot With All RAM Sticks Installed

    A few weeks ago, my 800 MHz dual-processor G4 started having frequent kernel panics. I tried all sorts of things, including changing the PRAM battery, resetting the firmware, and resetting the PMU. Then, one day, it would only power up but not boot, so I took it in for repairs.
    The shop I took it to determined that the logic board was malfunctioning and replaced it. The computer no longer has any kernel panics.
    The machine was designed for three 500 MB RAM sticks, which is what it had ever since I bought it over five years ago. Now, apparently, it won't boot with the last one installed, though it will with two. The shop replaced the new logic board and and even swapped RAM, but the problem still persists. Neither the power supply nor the hard drive appear to be malfunctioning.
    Does anyone have any ideas what's going on? Any ideas or advice would be greatly appreciated.
    Thank you.
    G4 800 MHz Dual Processor   Mac OS X (10.4.9)  

    squeakmaster, welcome to Apple Discussions.
    Have you tried the following with one 512MB RAM stick:
    1. Palce it in the first RAM slot. Does the Mac boot?
    2. If so, remove the stick & place it in the second RAM slot. Does it boot?
    3. If so, remove the stick & place it in the third RAM slot. Does it boot?
    The results of this test should reveal (1) if the stick boots in one or more RAM slots, the RAM is good and (2) if it fails to boot in a RAM slot, there is a problem with that slot.
    Do this with each of the tree RAM sticks & post back the results.
    When the logic board was replaced, was the firmware updated to be compliant with OS X. (Note - The firmware is installed on a chip on the logic board.) Check your Mac's firmware (Boot ROM version) version. Mac OS X: Available firmware updates
    http://docs.info.apple.com/article.html?artnum=86117 If an update is required, the update must be installed (using OS 9) BEFORE you install OS X.
    Can you boot up in OS 9.x? If so you can use DIMM First Aid - Check & recover disabled (missing) RAM from Apple's latest firmware updates http://www.versiontracker.com/dyn/moreinfo/macos/10415
     Cheers, Tom

  • 2nd HDD bay with HDD = notebook won't boot with HDD in 2nd HDD bay

    I recently came into a Pavilion DV9308 Notebook. It was in decent shape, well looked new and since I like tinkering with laptops and the motherboard had the dreaded NVIDIA GPU failure going on, I sent the motherboard out to my motherboard dude and he put a newer NVIDIA video chip in, made some adjustments and modifications to the heatsink cooler etc. Along with my modifications including vent holes and sealing up the fan blowing assembly so when the fan turned on the hot air would leave the laptop it now runs Windows 7 64 bit with a 64GB Kingston OS SSHD and 4GB DDR2 800mhz ram. It runs like lightning and impresses people when they see it boot up in 15 seconds.
    The problem is and the whole reason I picked this notebook to restore is because it has two acutal hard drive bays. Well ever since I've gotten the notebook It will not boot with a hard drive in both bays or a hard drive in Bay #2. I had to send the repaired motherboard back once because one of the ram slots wasn't working so this is happening on two different motherboards. I cannot find a reason why this is happening and have yet to find anyone that can help me with this. Can anyone explain to me what I'm doing wrong? I have all the correct drivers I think and the laptop runs at 130"F when pushed to the max! That is amazing compared to what it originally ran. It would be awesome if someone could please help me with this. Thanks.

    Hello jason9922.  I understand your notebook won't boot with a hard drive in the second bay.
    When you say that the notebook won't boot with a drive in the second bay what exactly do you mean?  Does the CAPS LOCK key flash or do you get an error?
    When you have the hard drive installed can you access the BIOS?  If so, is the hard drive detected within the BIOS?
    I'll keep an eye out for your response.  Have a great day!
    Please click the white star under my name to give me Kudos as a way to say "Thanks!"
    Click the "Accept as Solution" button if I resolve your issue.

  • TS3899 Cannot send email with new iPad air.  Works fine with old iPad and iPhone.

    Cannot send email with new iPad air.  Works fine with old iPad and iPhone.  I have deleted account and reinstalled.

    Thanks.  I got the problem fixed.  Spent time with the Apple folks and was kicked up to a senior advisor.  It seems the problem was with my internet provider - Tmie Warner.  Remember I could use the old ipad and the iphone to send mail.  I checked all the specifics between the three units.  It seems that TW is changing over from the RR.com  to TWC.com.  Since the new ipad air was just set up, it fell under the new TWC mail specifics. 

  • Biege G3 won't boot with OS 9.2

    I purchased a biege G3 MT with OS 8.6 on eBay. Unfortunately, the OS is in French. I upgraded that to OS 9.2 and now it won't boot. No chime and it stops after the first icon during startup. It won't boot with extensions off nor with the CD. I tried resetting pram, etc. without any luck. Loaded it with 8.5 and it works. Took another HD with 10.2 from another biege G3 and it works. It just doesn't like 9.2, but I have 9.2 running in another biege G3. Are there G3 that won't work with 9.2? Please help.
    biege g3   Mac OS 9.2.x  

    Hi elpro,
    Here's a bunch of stock responses you'll hear on the G3 forum.
    Is the 9.2 CD a universal installer (gold color), or a gray machine-specific CD, and if it is gray, is it the right one for your machine? Apple made gold CDs for general retail to work with all machines, and gray ones that were usually distributed with a machine with the components just for that machine. Unless you have a universal installer CD, the version of OS 9 you are trying to install may not have the right components for your system unless you happen to have one that matches your type of G3. If the 8.5 CD is the right one, and the OS X you say is from an identical machine then that may explain why they boot up but not your OS 9.
    If you post your problem on the G3 forum you'll almost be sure to get this question. How old is the battery in this machine? G3s exhibit all kinds of weird and unexpected symptoms when the batteries are weak, and they go through them pretty quickly, especially if they have been unplugged for a long time. The battery helps preserve basic machine configuration information between bootups so if you're having problems with your monitor it might even be related to the battery. If in doubt, replace the battery.
    The PRAM reset and extensions off are the other stock replies but you've tried those.
    Brian

  • Won't boot with external display connected

    My MacBook Pro (circa 1997) won't boot with the external display connected. I can connect the external display (20in flat planel) after it has started, and it works just fine.
    I have tried two different DVI cables (one of which I think is a DVI-A cable) and the DVI-to-VGA cable. The result is the same.
    During the boot phase I get the tone, the apple logo and the progress wheel. After 30 seconds to one minute those disappear to be replaced by an empty blue screen.

    In case anyone wonders, my "solution" was to change to a WB Elements Desktop 3TB (only USB 2.0 is currently available for this model). I miss the speed of USB 3.0, but it's much nicer to not have to remember to unplug and plug in the hard drive each time I boot.
    Still hoping to see a proper solution to this (since I don't have the WB My Book anymore, I can't test adaher's suggestion).

  • Is it ok to leave my old photos in Aperature and start with new photos in Lightroom?  MacPro with 2 x 2.26 Ghz Quad-Core Intel Xeon processor, 6 GB memory, 1 TB harddrive.

    Is it ok to leave my old photos in Aperature and start with new photos in Lightroom?  MacPro with 2 x 2.26 Ghz Quad-Core Intel Xeon processor, 6 GB memory, 1 TB harddrive?
    Or should I transfer them to Lightroom?

    That's really a personal preference. Support for Aperture is coming to an
    end and you may find yourself unable to get to theses photos in the future
    in the case of a HDD crash if you can't get the software to reinstall.
    Faced with that prospect, I would probably put it on my list of things to
    do when I am feeling really bored and looking for something to amuse myself
    with. You can export your Aperture photos in their original format to a
    folder on your desktop and then import them into Lightroom. Use the copy
    option on the import to save the photos in a new folder within your
    Lightroom catalog.

  • PC won't boot with X-fi XtremeMusic

    # This is my first post, so please tell me if I'm not giving enough info or anything..
    I bought a X-fi XtremeMusic and wanted to try out.. So I plugged it into a free PCI slot to find out it wasn't working: I couldn't boot. The only thing that would happen were the casefans spinning, but my screen remained black.
    I then tried to boot without the soundcard in the PCI slot, but my screen was still black.. Then I removed the onboard battery from the mainboard and waited a minute or two and put it back in: I was now able to boot again. I tried this one more time and exactly the same happened.
    Now I read something about X-fi soundcards and nForce4 chipsets not meshing very well, but I have a gigabyte MA-790XT-UD4P mainboard, so this doesn't apply to me I assume.
    Other specs: AMD Phenom II 720
    XFX Radeon HD 4870
    CoolerMaster 620w power supply
    My question is: what could be causing this problem? Or is it possible that my card is broken?
    Thanks!

    'Re: PC won't boot with X-fi XtremeMusic? Yeah I tried it in both PCI slots, but none worked. Still I wonder about one thing, which I forgot to mention: When I replace the onboard battery and boot I get an error (which I resolve by using the last known good option instead of putting everything to stock value as I'm overclocking in the bios) that the bios checksum is incorrect, so putting in the card changes some value in the bios.. But what value? And does this imply that maybe updating my bios might solve the problem?
    Also might I ask what bios revision you are currently using (I'm using the F4 bios)
    About the case thing you might also be right: I do have some difficulty putting in the card as it doesn't fit perfectly. I have a CoolerMaster CM690 case which has tool-free fittings, but I can't get the fitting which holds the card down without using substantial force. This also causes the card to be in the PCI slot at a slight angle, I thought this wouldn't matter as the pins still connect, but may this be a problem? I already tried starting up without the case fitting holding the card in place and instead using my fingertips to hold in postion, though to no avail.
    Oh and exactly what bracket should I look at (the one you referred to in your post)?

Maybe you are looking for