IMac going through "Looping Startup" after failed file exchange

I just got a new Intel iMac (off eBay). It worked perfectly when I got it...
First, I connected my old G5 to it via Firewire and was going to use Migration Assistant, but quit when I found that it would take 12 hours. Then, I moved some stuff on my G5, reconnected, and was just dragging and dropping folders.
While waiting for a 14 GB folder to transfer, I tried to load Wikipedia in Safari, which gave me the spinning beach ball. After a couple tries to quit Safari, soon the whole computer became frozen, and I was forced to shut down.
Now upon startup, the screen turns white and the Apple logo shows up, the loader spins a bit, and then the screen will go black- replay the startup chime, and do it all over again.
I'm also having difficulty doing any startup commands (I tried and failed to start it from the install DVD by holding D during startup)...
Any help please? I don't have AppleCare on this and would really like an at-home fix.

I got the iMac to start up from the boot disc, but now it tells me that it can't install leopard. I was informed that I needed to do an erase and install (apparently the drive was messed up.... of course) but when I tried to do the startup I received an alert that it couldn't proceed because it couldn't make a certain folder.

Similar Messages

Screen Goes Black During Startup (after login)

Hello,
I have a 2005 Mac Mini PPC OS 10.4.11. This is the first problem I've had since purchasing the computer. This problem popped up out of nowhere. The screen goes black during startup just after I login into my account. I can hear the hard drive spin like it is finishing the startup process. The monitor power button blinks green.
I'm using the digital video cable. I tried switching to the VGA cable but the screen then goes black before the login screen.
The computer will startup in Safe mode.
I've tried Disk Utility (repair disk and repair permissions), Techtool Pro, Drive Genius, ColorSync Utility, Reset Pram, installed latest OS updates, and even re-installed the System twice (once because I removed all the Extension files and then the computer would not startup at all).
I've also tried removing cache files, plist files, startup files, preference files, and some or all of extension files.
The only applications I have recently installed were QuickTime Pro and a .flv movie player; both about a week before this problem started. I tried to uninstall them but could not figure out how.
What is the problem? How can this be fixed?
Thanks.
Richard

Howdy. I have Had the same problem as you in regards to a ViewSonic Monitor and the Mac Mini. This is my post:
Monitor failure when switching resolutions
Using Displays with the Mac mini, Apr 1, 2008, Replies: 2
Running 10.5.2 on Mac Mini G4 1.42 Ghz with ATI Radeon 9200, 32 MB VRAM and ViewSonic VX922
When switching resolutions from 1280x1024 to 800x600 or vice versa, the monitor will cut to black and the power light on the monitor switches from solid green to flashing green. Only by combinations of powering down the mini and starting it up again with the monitor on or off will bring the monitor back to life. This problem makes it difficult to play World of Warcraft amongst other games. Any feedback in regards to this problem would be appreciated.
Thank You!
At this point, I am unable to switch Monitor resolutions. If I do, the monitor goes black, and I have to power everything down and wait a while before I can restart.
I've resigned myself to not switching resolutions, but I'm wondering if you've had any luck.
Thanks for your time!
Kevin

What does a greyed out folder mean? (after failed file copy from Time Capsule)

I did a clean install of Mavericks and I'm trying to copy my files back from my Time Capsule.
The transfer rate is terrible, despite being a direct link via gigabit ethernet.
I have about 800GB of Logic projects on the Time Capsule, so I set it off to copy them over.
After 2 days and 233GB copied across, my iMac hung and I had to do a hard reset.
I now have a 233GB folder on my desktop that is lighter in colour and I can't open it. Nothing happens.
Is there any way to resume the copy, or am I looking at starting again, leaving my iMac untouched for 5 days and hoping for the best?
The tech just doesn't work reliably, despite being a fresh install of Mavericks and an offical Apple Time Capsule 2TB. No idea what I'd do if I had 2 or 3GB of data...

Phil,
If you haven't already you may want to try to restart the TC first to ensure that it doesn't think that that folder or it's contents are still in use in some way.
If that doesn't allow deletion, then you may need to use terminal to delete it regardless of permissions. Be careful when doing the following and make sure that all spaces and typing are done exactly as given below:
1) Log into the mac as an account that is an Administrator
2) Open Terminal, then arrange Terminal and Finder so you can see them both
3) Open a Finder where you can see the grayed-out folders on the TC
4) In terminal, type the following, including a [space] at the end (but don't hit enter yet)
sudo rm -r
5) From Finder, drag the bad folder to the terminal window and release. This will type the correct path into terminal. Ignore and leave any backslashes that are added to the path. You should end up with a command that looks like this:
sudo rm -r /Volumes/MyTC/ParentFolder/BadFolder
6) Hit enter ONLY if the path looks correct and ends in the name of the bad folder you are trying to kill. If the path looks wrong or does not end in the targeted folder name, then do not hit enter and close terminal.
7) Once you hit enter you will be prompted for the password of your currently logged in user.
8) it should then blow away the folder.
9) Close terminal

White Screen, Apple Logo, Spinner on startup after failed software update.

Hi, so my Macbook was performing poorly this morning and I decided I would try to install updates. The updates started normally, but around halfway through the bar stopped moving and the text underneath it said, "Running Installer Script." I left it alone for about three hours, came back, and saw that it was still doing the same thing. I decided it was time to try to reboot, and foolishly held the power button down for several seconds until it turned off. Upon turning it back on, I discovered that it would only go as far as the white screen with the apple logo and the thing spinning under it for about 20-30 seconds, then the screen will go black and it will try to start up again. I started it in verbose mode and it gives the following errors before crashing:
disk0s2 i/o error 0 [level 3] [readuid 0] [facility com.apple.system.fs] [errtype io] [errno 5] [iotype read] [pblknum 233675120] [lblknum 540]
disk0s2 i/o error 0 [level 3] [readuid 0] [facility com.apple.system.fs] [errtype io] [errno 5] [iotype read] [pblknum 233674536] [lblknum 467]
disk0s2 i/o error 0 [level 3] [readuid 0] [facility com.apple.system.fs] [errtype io] [errno 5] [iotype read] [pblknum 233674640] [lblknum 480]
I haven't tried booting from the disk because my disk drive has been broken for a while and needs to be replaced. I assume this problem is my fault, but I would very much appreciate anyone's input on how to resolve it.

Hello and welcome to Apple Discussions...
You would be better off posting in the Leopard v10.5 forum here.
Using Mac OS X Leopard
This is the Safari forum. Just copy/paste the same post over there.
While you are waiting for a response there, try the help here.
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
You can get replacement system disc(s)...
Call Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available.
Carolyn

27" iMac i7 won't startup after recent security update

My iMac does not boot properly since I installed the recent security update. All I get is the circle slash symbol. Anyone have a solution?

Hi Carlos
Slip in the OS X DVD that came with your iMac, startup your iMac on the DVD, then open Disk Utility and Repair your Macintosh HD startup volume.
Dennis

Problem with scrolling text through arrow keys after exporting file to html

I am using Fash Professional CS6. I have created a text box that I can scroll through the scroll wheel of my mouse, as the scroll bar is hidden. But when I try to scroll the text through the arrow keys it is not allowing me to so that. As this is website and everyone is not going to have a scroll wheel, I have to make the arrow keys work to scroll the text. Could you please help me in fixing this problem? I tried to search this problem, but I haven't seen any questions so far.

if tf is your textfield:
stage.addEventListener(KeyboardEvent.KEY_DOWN,f);
function f(e:KeyboardEvent):void{
    if(e.keyCode==38){
        tf.scrollV++;
    } else if(e.keyCode==40){
        tf.scrollV--;

Reinstalling through Creative Cloud, after failed installation?

How does that work?
I got a message that I have to uninstall and then reinstall me trail version of InDesign.
Opening the Creative Cloud does not help at all. Here I am status: installed.
So now, I cannot reinstall as I was told to.
I need assistance her.
MrAnders

D manyman your membership is tied to your Adobe ID. For information on how to install the Adobe Creative applications included with your membership please see Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.

After Effects files exchange beetween CS6 and CC

Hi, I have CS6 Production Suite, with which I don't seem to be able to open CC files. Will I have to upgrade to CC?
If so, is it possible to upgrade one app only (AE) and not the whole suite?
Thanks for your help,
Oukankoman

With CC, you don't purchase an app. You pay a (very reasonable) monthly fee and get the entire suite of Adobe software available to you. (If I remember correctly, you can pay an even smaller amount to just get one piece of software, but considering the low price for owners of CS6, you might as well do the whole shebang.) See Adobe's website for more info.

Why am I missing songs after reorganizing files?

This morning did everything I usually do but iTunes couldn't locate any song files. So I rebooted and still had the problem.
Went to Edit/Preferences and saw that folder location was pointing to the default folder on C:, but my music is on an external drive (F:).
So I changed the location to the correct location and it refreshed the library. Then it asked if I wanted iTunes to reorganize the files. I said yes.
Once complete, I had a whole bunch of exclamation marks in the left column! I've confirmed that the song files are actually in the correct place. And it's very random which ones are lost - 2 or 3 songs from albums - the rest of the songs ARE there. Very strange.
I have over 20k songs, so going through and manually "reattaching" each file is not even an option.
Any ideas out there???
Thanks!
Mike

From iTunes 9.2 onwards if you attempt to Get Info. on a lost file and then cancel when asked to try to locate it, the summary tab should show you where iTunes "thinks" the file should be. If possible move missing files back to where they ought to be then close & reopen iTunes to reconnect them.
That's fine for an obvious error, say the iTunes Media folder has been relocated, but since you seem to have a random selection of located and unlocated tracks you could try my script SwitchLinks.vbs.
Select one or two tracks to begin with, double-click on the script to run it and use the No option so you can check that is identifying the right files to reattach to. If that goes OK then create these lost and found playlists and run the script on your missing tracks in larger groups.
Lost & Found
Create a playlist called Found, select everything in Music and drag it into the Found playlist. Create a smart playlist called Lost matching All the rules Playlist is Music and Playlist is not Found. Your lost tracks will be in this playlist.
Alternatively, if you are not bothered about play counts, ratings, date added etc. then you could try iTunes Folder Watch which can scan your library for missing files to be removed and scan your media folders for new files to be added.
tt2

How to burn an iMovie to DVD without losing quality? I have iMovie 10.0.5 and imac 10.9.4 mountain lion. I do not have iDVD. After iMovie goes through the encoding process, quality is horrible. How can I fix this?

How to burn an iMovie to DVD without losing quality? I have iMovie 10.0.5 and iMac 10.9.4 mountain lion. I do not have iDVD. After iMovie goes through the encoding process, quality is horrible. How can I fix this problem? I have tried the apps BURN and DVD Creator for MAC. I need to finish this DVD asap and becoming more and more frustrated. Why would Apple give us iMovie and not provide us an app to burn it to a DVD and / or take away the iDVD?
Alicia McGinnis

Why is there no iDVD on my new Mac? How do I get it and how do I install it?
https://discussions.apple.com/docs/DOC-3673
To burn a DVD with iDVD from the latest version of iMovie, you have to export the movie using the Export button and select 480p as the size. Open iDVD and start a new project, then drag that exported movie file into the iDVD menu window, avoiding any drop zones you see.

After startup, my desktop rushes through all the pictures if goes through and I can't load/see any apps until it stops. What to do?

When I turn on my macbook pro (end of 2010 so it isn't old), I wait for the usual things it needs to run through, and before my icons etc load up (the ones on the desktop), my screen rushes through all the images I have told it to rotate through as a desktop screen (I have alternating backgrounds that are supposed to change every 5 minutes or so). It is the second time it has happened now (2nd startup) and it has been fine for the past few months from when I bought it in December. While it goes mental and rushes through the photos, it can't go to the bottom to bring up the Apps bar so it is virtually useless (unresponsive) when it goes through this mad stage. I recently deleted a chunk of video I transferred off an old camera onto the Mac but I can't see how this would have messed up a £1,000 machine 0-O Please let me know what has happened because I don't want to have to call Apple again =(
-Jack

Thanks for the quick advice!
Unfortunately, I am still unable to open my core productivity apps, namely Skype and Evernote. Twitter, as well, could not start. But interesting quick fix though, I never knew you could do that.
Here's the error log after the restart:
What else should I try?

After the latest updat to Mavericks 10.9.3, my imac continues to loop back to the login screen...Suggestions??? THANK YOU VERY MUCH!

After the latest updat to Mavericks 10.9.3, my imac continues to loop back to the login screen...Suggestions??? THANK YOU VERY MUCH!

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[45]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}')printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ s/ *:$//;x;s/\n//;/Apple|Capacity:|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;};/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;} ' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/:/;END { if(NR<100)print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}')print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR==2'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' ' s/^.{52}//;s/ .+//p ' ' /Launch[AD].+\.plist$/;END{if(NR<100)print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/;END{if(NR<100)print "/System/"};' '/^\/usr\/lib\/.+dylib$/p' '/\/etc\/(auto_m|hosts[^.]|peri)/s/^\.\/[^/]+//p' ' /\/(Contents\/.+\/Contents|Frameworks)\//d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' /lR/ { if($2<='${p[25]}')print $2;} ' ' BEGIN { FS=":";} $3~/(sh|ng|ic)$/ { n=split($3,a,".");sub(/_2[01].+/,"",$3);b=b"\n"$2" "$3" "a[n]" "$1;c=c$1;} END { d="sort|tail -n'${p[38]}'";print b|d;close(d);if(c)print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(A.+ E.+ text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' /:/{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status "-F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL'" '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/*/*.{BS,Bas,Es,OSXU,Rem}*.bom' '{/,}L*/Lo*/Diag* -type f \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;' '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto_master,{cron,fs}tab,hosts,{launchd,sysctl}.conf} /usr/local/etc/periodic/*/* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP RSSI Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear;};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ test "$v"&&echo "$_";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;A0;{ A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D22 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D23 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;D22 32 31 43 38;D23 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

IMac slow on startup after installing Mavericks

Hi,
Like others I have been experiencing my mid 2011 iMac being slow on startup (and a little slow after that). I've read a lot of threads about this and was wondering how to approach it.
I was already thinking of buying more RAM ( I currently have 4GB) and updrading to Yosemite, does anyone think this may help rather than going through many diagnostic steps with Mavericks?
..... or am I likely to find myself back in the same position!
Jon
P.S. i know the Apple site says no RAM is available for this model, but one of the more experienced posters supplied a link to a site which implies that there is.

Hi there,
Here's the report.
By the way, with just Firefox and Aperture open, here is a copy of my Activity Monitor:
The swap used seems to be a very recent thing, until a few days ago it read 0.
The slowness is after startup - things bounce in the dock and safari takes nearly 10 secs to open, but if the Mac has been on a little while, or if it's been on sleep, then things run ok. There are other things I have noticed like some of the Aperture functions being slower and a bit clunky - this seems to have a been a constant feature since I upgraded to Mavericks and upgraded Aperture to go with it.
Any help you can give is appreciated.
Jon
EtreCheck version: 2.0.11 (98)
Report generated 20 November 2014 21:15:28 GMT
Hardware Information: ℹ️
    iMac (21.5-inch, Mid 2011) (Verified)
    iMac - model: iMac12,1
    1 2.5 GHz Intel Core i5 CPU: 4-core
    4 GB RAM Upgradeable
        BANK 0/DIMM0
            2 GB DDR3 1333 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1333 MHz ok
        BANK 0/DIMM1
            empty empty empty empty
        BANK 1/DIMM1
            empty empty empty empty
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
    AMD Radeon HD 6750M - VRAM: 512 MB
        iMac 1920 x 1080
System Software: ℹ️
    OS X 10.9.5 (13F34) - Uptime: one day 8:33:41
Disk Information: ℹ️
    ST3500418AS disk0 : (500.11 GB)
    S.M.A.R.T. Status: Verified
        EFI (disk0s1) <not mounted> : 210 MB
        Macintosh HD (disk0s2) / [Startup]: 499.25 GB (354.24 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
    HL-DT-STDVDRW GA32N
USB Information: ℹ️
    Apple Inc. FaceTime HD Camera (Built-in)
    Mitsumi Electric Apple Optical USB Mouse
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
    Logitech USB Receiver
    TOSHIBA TransMemory      15.52 GB
        S.M.A.R.T. Status: Verified
        TOSHIBA (disk1s1) /Volumes/TOSHIBA : 15.52 GB (15.27 GB free)
    Apple Internal Memory Card Reader
    Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /System/Library/Extensions
    [not loaded]    com.freecom.driver.BoulderScsi (1.0.0d1) Support
Problem System Launch Daemons: ℹ️
    [failed]    com.apple.security.syspolicy.plist
    [failed]    com.apple.wdhelper.plist
Launch Agents: ℹ️
    [loaded]    com.google.keystone.agent.plist Support
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist Support
    [loaded]    com.google.keystone.daemon.plist Support
    [invalid?]    com.torch.update.agent.plist Support
User Launch Agents: ℹ️
    [loaded]    com.adobe.ARM.[...].plist Support
User Login Items: ℹ️
    Auto Mute    UNKNOWN (missing value)
    FastTasks 2    Application (/Applications/FastTasks 2.app)
Internet Plug-ins: ℹ️
    FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
    QuickTime Plugin: Version: 7.7.3
    AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
    AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
    Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
    Default Browser: Version: 537 - SDK 10.9
    Silverlight: Version: 5.1.30317.0 - SDK 10.6 Support
3rd Party Preference Panes: ℹ️
    Flash Player Support
Time Machine: ℹ️
    Skip System Files: NO
    Mobile backups: OFF
    Auto backup: NO - Auto backup turned off
    Destinations:
        VERBATIM HD [Local]
        Total size: 0 B
        Total number of backups: 0
        Oldest backup: -
        Last backup: -
        Size of backup disk: Excellent
            Backup size 0 B > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
         2%    WindowServer
         1%    fontd
         0%    mds_stores
         0%    mds
         0%    AppleSpell
Top Processes by Memory: ℹ️
    975 MB    Aperture
    369 MB    firefox
    129 MB    softwareupdated
    69 MB    WindowServer
    52 MB    mds_stores
Virtual Memory Information: ℹ️
    227 MB    Free RAM
    1.31 GB    Active RAM
    1.53 GB    Inactive RAM
    966 MB    Wired RAM
    1.82 GB    Page-ins
    91 MB    Page-outs

I did a backup from all my files saved in old external hd to time capsule. After that double checked and recover one file from TC to mac air and it worked just perfect. Today went through TC to recover another file and none of them were there?

I did a backup from all my files saved in old external hd to time capsule. After that double checked and recover one file from TC to mac air and it worked just perfect. Today went through TC to recover another file and none of them were there?Anybody has a clue what happened?

renatocremonese wrote:
I want to use it for backing up my Mac.
It's good for that . . .
But also I don't keep all my stuff in my Mac.
But not for that.
This older and not day-by-day usage files I want to store in the time machine.
You can do that (see below), but how are you going to back them up? If your only copies are on the TC, when (not if) it fails, you risk losing your only copy of the data.
Is it possible to split TC in two partitions.
No, but there are some workarounds, including making a fixed-size disk image on it to "reserve" some space. See #Q3 in Using Time Machine with a Time Capsule.
But you still won't have backups of the stuff you put there.
You don't say what kind of Mac you have. If it's a desktop model, just keep the external HD connected to it, and let Time Machine back it up along with your internal HD.
However, it sounds like you may have a laptop, where that's not going to be convenient. In that case, your best bet might be to copy the external HD to a disk image on the TC as above, then keep the HD in a safe place.
To finish, when i enter the TC and go through the Time line how can I get a file from there and move it back to Mac hd.
Via the "Star Wars" display, per #15 in Time Machine - Frequently Asked Questions.
You might also want to review the Time Machine Tutorial, and perhaps browse the rest of the FAQ.

IMac goes to sleep/hibernate multiple times per day after installing Maverick OS. I have to shutdown and power back on.

iMac goes to sleep/hibernate multiple times per day after installing Maverick OS. Moving the mouse or hitting the spcaebar will not wake the pc.
I have to shutdown and power back on. My iMac was purchased in January 2011 and no longer in warrenty. The energy saver 'sleep' and 'display' settings are set at 10 minutes. When I changed to 'never' the machine got very hot and I changed the settings back. I have checks by: Put hard disk to sleep when possible and wake for network access. Any help would be greatly appreciated.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

IMac going through "Looping Startup" after failed file exchange

Similar Messages

Maybe you are looking for