IMac hard drive dies - new one installed - Contribute on Time Machine won't install....

I am looking for help because I've now used up a trial of Contribute on my desktop and laptop.
It's frustrating because I thought I could reinstall Contribute from the backup on my Time Machine drive but in the "Installer" folder it has some images of the logo a few text files and that's it. I've tried to load the program from that drive onto my new drive and no dice.
I now have clients freaking out and I don't know what to do. Had no problem with other programs that were backed up, this has been the only one.
ANY help would be so greatly appreciated. Thanks so much.
Amy

http://prodesigntools.com/tag/ddl
Mylenium

Similar Messages

Can I partition my external hard drive so that one partition is for Time Machine and the other is to install Windows with Boot Camp?

I have a Seagate FreeAgent GoFlex 1TB USB 3.0 external hard drive that I currently use just for Time Machine backups. Is it possible for me to go into Disk Utility and create a new partition on the drive so that I may install Windows 7 via Boot Camp? Or since I am already using it for Time Machine do I have to keep it only for Time Machine?

You must install Boot Camp in your internal drive because Windows can't be installed in an external disk and Boot Camp can't do that

Hard Drive failed- new one installed - won't boot - fans going full

I have a mac mini one of the earlier intels. I came home and the fans were going full on, I turned it off and treid to restart.. and got the empty folder. So I guessed it was the hard drive. Took it out and tested it on my enclosure - with disk utility - buggered.
So I installed another hard drive after I had installed the OS. As soon as I connected the powere cord the fans still going full on.
I still get the missing folder symbol.
I tried booting off a usb connected hard drive and it starts up.
Any ideas?
I am guessing the hard drive has caused some other issue, can I do an internal reset?
Also, when I boot off the external hard drive and open disk utlity - I can see the other internel hard drive??
But it wont boot from it?
Appreciate any ideas... I have run out!!
Thanks in advance
Ross

AHA, just fan issue?
Tukaine
Sep 23, 2012 10:59 PM
Since the late 2009 iMacs came out, replacing the hard drive has caused the internal Hard Drive Fan to start running at around 6000RPM.
This is due to Apple replacing the external Hard Drive temperature sensor with a proprietary firmware and using the drives internal sensor.
Replacement drives do not contain the firmware to deliver temperature data on the temperature sensor cable.
When the iMac does not receive a good signal from the hard drive it puts the fan at full speed to protect the drive.
If you replace your drive, your iMac will initially seem fine, but soon the fan will begin to speed up to full speed. Resetting the SMC (System Management Controller) will have a temporary effect, but again the fan will speed up.
Fixes people have used in the past included:
Using smcFanControl and the terminal to set a MAX speed for the fan and writing scripts to start this after every sleep/restart.
Shorting the temperature sensor cable (Not a possibility on 2011 iMacs) this tricks the iMac into thinking the drives temperature is very low, hence slow fan speed.
Both these fixes are less then perfect and leave the drive in a dangerous situation with no protection from overheating.
Another option people try is other Fan Control software. These programs will not work for this particular issue as they often only control the base speed, and if they do control the fans actual speed they rely on the temperature reported by the sensor which is now incorrect.
HDD Fan Control
HDD Fan Control works to fix this issue by reading the drives internal temperature using the S.M.A.R.T protocol and set the fans actual speed to a value good to protect the drive.
It runs at startup and continually to always control the fan correctly, prevent the loud fan noise and protect the drive from overheating
Instead of HDDFan Control, get the free SSDFan Control
http://exirion.net/ssdfanctrl/

Hard Drive Failed, New one Installed, Problems of course

Hellooo Everyone This is sort of a last ditch effort to see if I can fix this myself or if I am going to have to shell out 500 dollars to get my laptop back in working order. So I have a HP dv6-6140 laptop. A few weeks ago the hard drive failed and I purchased and installed a new one, ran windows 7 and have it on my laptop. When I try to hook up an ethernet cable to download and install the drivers for the laptop the ethernet cable is not recognized it says no internet connection blah blah blah. Ok so I downloaded the drivers to a flash drive and installed some of them onto my laptop, no changes. So I was thinking of purchasing the recovery discs which im assuming include the drivers for the notebook for 35 dollars which is paltry in comparison to what I would pay if I took it to a computer repair shop, but how do I know that would work? I dont. I am looking for ideas or anything that I may be missing. I am not computer illiterate but I am not an expert. Any advice would be greatly appreciated Thanks!
Kelly

Hi, Kelly:
On your model normally it is very important to install the chipset driver first and reboot before attempting to install the ethernet (wired network) driver.
The chipset drivers install some motherboard driver which I think enables the communication to the ethernet adapter.
The problem is, HP does not include the necessary chipset drivers for your model (which I assume is a HP Pavilion dv6-6140us Entertainment Notebook PC).
So...Download and install the AMD Chipset Drivers and reboot. You want the first driver listed on the webpage.
http://support.amd.com/en-us/download/chipset?os=Windows%207%20-%2064
Then see if the ethernet adapter works again or reinstall the ethernet driver after you reboot the PC.
The parts list indicates your model comes with a Broadcom wireless/bluetooth card.
Here are the links to the drivers you need for that...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-107849-1&cc=us&dlc=en&lc=en
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-131427-1&cc=us&dlc=en&lc=en...

My macbook pro hard drive crashed, new one installed, need to reload my cs5 and lightroom on new hard drive

Help! Can't figure out how to download cs5 & light room on my new hard drive after macbook pro crashed. any ideas

You can get cs5 from here:
http://www.adobe.com/downloads/other-downloads.html
lightroom from here
(it says updates, but they are the full versions. for example if you have lightroom 4, install the version 4.4.1)
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

Data transfer: ext hard drive to new Mac with Mavericks using Time Machine

Data from old computer is on ext hard drive. I delayed transfer to new Mac. Now using Migration Assistant bit I don't know if it is working or just hung up. It shows 'looking for other sources' for over an hour. Please advise.

In general, most people will recommend Carbon Copy Cloner or SuperDuper! You can find either one easily enough with a web search.
However, in your case, I imagine you are going to have a hard disk returned to you all by itself, and you will need to install it in an enclosure. Don't let that bother you as this is easy to do and the enclosures are not expensive ($40 or so).
Once that is done, I would recommend you set up your brand new Mac by answering all the questions during initial setup as usual. Be sure to use your correct Apple ID - probably the same one you used to log into this support forum. When you reach the point in which it asks you if you would like to transfer your old documents and settings, connect the old hard disk and select it as the source. It will take some time as it copies all its contents to your new Mac. All your familiar items will be exactly as they were on the failed Mac.
After that, you can use the old hard disk as a Time Machine backup. When you are satisfied everything on your new Mac is running as it should, go ahead and erase the old disk. Then, tell Time Machine to designate it as a backup, and the rest is automatic.

After replacing a failed hard drive with new one I inadvertently created a different account name(home/user) than the one in the Time Machine backup. Now I cannot restore the photos in iPhoto. What are my options?

After replacing a failed hard drive with new one I inadvertently created a different account name(home/user) than the one in the Time Machine backup. Now I cannot restore the photos in iPhoto. What are my options?

The best thing to do would be to start over. Use Setup Assistant this time.
Boot into Recovery, launch Disk Utility, and erase the startup volume. This operation will destroy all data on the volume. Quit Disk Utility and install OS X. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
When you reboot, you'll be prompted to go through the initial setup process. That’s when you transfer the data from one of your backups. For a walkthrough, see here:
Using Setup Assistant
Don't transfer the Guest account, if it was enabled on the old system.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.

Can someone please help me re-install my Creative Design 5.5 on my Mac? My MacBook Pro recently crashed and had to have the hard drive replaced. The back up from Time Machine is not reinstalling the program. Since I have the download paid, and codes, I

Can someone please help me re-install my Creative Design 5.5 on my Mac? My MacBook Pro recently crashed and had to have the hard drive replaced. The back up from Time Machine is not reinstalling the program. Since I have the download paid, and codes, I need direction on how to reinstall -- HELP?

Hi bodegakc,
If you have the serial number then please use the below mentioned link to download the product you are looking for .
CS5.5
Also before installing Please go to Applications-->Utilities--> Adobe installers and if there is any uninstaller for CS5.5 , you can remove it and do a fresh install.
You can also use creative cloud cleaner tool before installing.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Thanks
Nikhil Gupta

Does an external hard drive have to stay plugged in with Time Machine?

I have an external hard drive but I do not always leave it plugged in. I usually back up my computer every week or so and am just now getting around to using Time Machine. If i plug in my external hard drive and press "Back up now" will Time machine back up my entire computer again or just what has been updated? Do I have to leave the slider for Time Machine in the On position or should I turn it off until the next time I plug it in?
Thanks

Only if you want it to continue backing up the computer. If you eject it Time Machine will suspend backups. Time Machine will reinitiate backups when the drive is reconnected.
If nothing has changed, the selecting Back up Now will not create a completely new backup.

Just got Prosoft drive genius 3 software, and it's telling me that the external hard drive that i am using for my time machine back up drive needs to be defragmented. is it wise to do this or should i not??

just got Prosoft drive genius 3 software, and it's telling me that the external hard drive that i am using for my time machine back up drive needs to be defragmented. is it wise to do this or should i not??

Let's hope a couple things: that you have bootable clones of your drives also; that the backup drive for TimeMachine has over 3x capacity of the data you plan and are storing. I would also switch TM backup drives so you have a 2nd.
Fragmented free space affecting performance happens when the drive is too full which may mean there isn't enough free space for a full backup set.
1.5TB for backing up 500GB, while WD Green 3TB is $140 and WD Black 1.5TB is, about the same price.
I'd be worried about the integrity and directory, and whether you can afford to lose that drive. Defragging is also a very slow operation. the ideal: to just clone a drive, or start over with another drive and wait. cloning TM volumes has not been done or has it? SuperDuper hoped to but I don't think they or Bombich's CCC made it there.
Trouble with highly fragged is when free space gets to 20% normally, 1/3 or so though for TM volumes, and finding where and a chunk of space for the file being written. Does TM use large spare image files of like 2GB?
Best would be to ask in the TimeMachine section Snow Leopard
https://discussions.apple.com/community/mac_os/mac_os_x_v10.6_snow_leopard?view= discussions#/?tagSet=1009
where there are some good FAQ and tutorials, and people that know the ins-and-outs and shortcomings.

If you delete a large file from the mac hard drive does it also remove it from time machine on external hard drive

if you delete a large file from the mac hard drive does it also delete it from time machine on the external hard drive ?

As the others say, no, the backup copy won't be deleted immediately, but it will eventually.
If you want to delete all backups of a selected item, such as for space or security reasons, see #12 in Time Machine - Frequently Asked Questions.

Need to wipe hard drive to restore to previous date from time machine back up. Unclear how to do this. Please advise or provide link to this procedure on website. Thanks.

Need to wipe hard drive to restore to previous date from time machine back up. Unclear how to do this. Please advise or provide link to this procedure on website. Thanks.

See Pondini's TM FAQs for starters.

HT201250 I don't store any files on my computer, I store them on a hd. Can I restore docs from my hard drive if they were backed up using time machine? And will it restore if the hd isn't even there? Like what if it got stolen or destroyed.

I don't store any files on my computer, I store them on a hd. Can I restore docs from my hard drive if they were backed up using time machine? And will it restore if the hd isn't even there? Like what if it got stolen or destroyed.

ehphotograph wrote:
Can I restore docs from my hard drive if they were backed up using time machine?
Yes.
And will it restore if the hd isn't even there? Like what if it got stolen or destroyed.
Also yes.
Directly-connected external drives (ie, USB, FireWire, Thunderbolt) are not backed-up by default. You must remove them from the exclusion list in Time Machine Preferences > Options to get them backed-up. (Network drives cannot be backed-up.)
And they must be formatted for a Mac -- any variation of Mac OS Extended.
If the drive is connected, you can browse or restore normally -- just go to the folder or document in question and Enter Time Machine.
If the drive is not connected, it's a bit different. See #E3 of Time Machine - Troubleshooting.
Message was edited by: Pondini

I have stored everything on my Macbook pro in a external hard drive (Time Machine) Now that we have "wiped the machine" I am told I can start it over and load ontent--apps, docs, etc from the hard drive, just plug it in, find the time machine and what?

I have stored everything on my Macbook pro in a external hard drive (Time Machine) Now that we have "wiped the machine" I am told I can start it over and load ontent--apps, docs, etc from the hard drive, just plug it in, find the time machine and what? I need to know what to highligh, what to click on.

hirogliffix,
take a look at this Apple page — in particular, the “Restoring data from Time Machine backups” section and its “Restoring your entire system from a backup” subsection.

What is the best USB powered portable 1TB hard drive for a macbook pro that allows Time machine to work, windows (thru Parallels software) and mac storage and is available in Australia?

What is the best USB powered portable 1TB hard drive for a macbook pro that allows Time machine to work, windows (thru Parallels software) and mac storage and is available in Australia?

I agree with teh OWC sggestion above, but why must it be USB powered? I find that far more unreliable, and the low power devices slow.
I'd frankly get a good external enclosure and buy a bare drive. But the OWC stuff is quite good - vastly better than some of the majors (WD being aprime example of stuff that's boderline quality and often not compatible)
Grant

IMac hard drive dies - new one installed - Contribute on Time Machine won't install....

Similar Messages

Maybe you are looking for