Imac hard drive in Mac Pro??

My boss has an Imac drive that had problems, and got pulled out of his Imac.
He wants me to try and recover the data.
Can this drive go in my Mac Pro?
I installed it, but when i tried to boot up, it sounded like a wind tunnel, never booted.
any advice??
Thanks!!

For such situations, always better to slap drive into a USB/FW type case and boot the computer and only then try to mount the drive.
The systems are different, your Mac runs 10.4.10 even now?
There is a nice thread or two over on OS X on recovery software and tips.
http://discussions.apple.com/thread.jspa?threadID=2611678

Similar Messages

  • Can I format an IDE Hard Drive from Mac Pro?

    I use a mid - 2012 Mac Pro; run Mavericks OS X 10.9.2.
    1. Can an IDE hard drive (using an external drive) be formatted to 10.9.2, from my Mac Pro using Mavericks? (the IDE hard drive is new/unformatted).
    2. Once formatted to 10.9.2, can I reformat the IDE hard drive to Mac OS X Leopard 10.5.8, from my Mac Pro using Mavericks?
    3. If so, would should I do to accomplish Question # 2 above?

    The version of the OS that is running  is not relevant to formatting the drive. When you format a drive in any OS, you should select "Mac OS extended journaled." (That is, unless you plan to share the drive with a Windows computer.) Formatted this way, the drive can be used with any version of Mac OS.
    You do not have to reformat the drive each time you connect it with a different OS.

  • How to install hard drive into mac pro

    how to install hard drive into mac pro

    I recently bought a new 2TB internal sata drive for my Macpro.
    The installation was easy, but I'm not sure what to do next.
    For one, should I partition the drive?
    My purpose for buying the drive was to use it as my go to drive for Parallels. I used to run my music studio on Windows based machines, and my older project files require a windows OS to recover. I installed Parallels so I can have my studio running Mac and Windows programs which will enable me to access my old project files and take them into my newer Protools system.
    So now, I've installed my new hard drive, but I'm not sure if I should partition it....And!? I'm not sure how to designate that drive for my virtual pc on Parallels. I was able to allocate enough disk space to parallels in order to load my music software, but at this point, I'm not sure if I've just promised it disk space from my original partitioned drive (which only has about 350 GB left on it).
    I would love to be able to make one internal drive available for Parallels, and the other available for the rest of my OSX. When I use Parallels, I still would like to save some extra information on the 2TB drive as well from my dekstop running OSX.
    I hope this makes sense! Your help is much appreciated!

  • Swap Hard Drives Between Mac Pro's

    I have a MacBook Pro "Core 2 Duo" 2.53 15" (Unibody - Late 2008) that has been upgraded from the standard 320 GB SATA hard drive, to a Seagate 750 GB SATA 16 MB cache 7200 rpm hard drive.
    I have recently upgraded to a MacBook Pro "Core 2 Duo" 2.66 15" (SD - Mid 2009) that has the standard 320 GB SATA hard drive.
    Both are running Mac OS X Snow Leopard 10.6.8.
    I will be selling my older (2.53GHz) Mac Pro but would like to keep my larger hard drive.
    Question
    Can I simply swap the hard drive out of my older (2.53GHz) Mac Pro and install it into the newer (2.66GHz) Mac Pro, without having to reinstall the Mac OS X software?
    I no longer have any of my OS X install disks.
    Will the 750 GB hard drive still perform the same in the newer Mac Pro, given that they are running the same OS?
    Thanks in advance!

    From what I understand the USB/PCIe interfaces are (somewhat) device specific. But it depends on the particular vendor in question.
    According to barefeats.com, regarding USB devices:
    "...Our only concern was that it {the CalDigit adapter} only worked with CalDigit USB 3.0 enclosures like the AV Drive. They since updated the driver to "unlock it." In fact, all the USB 3.0 results posted above for non-Cadigit enclosures were done with the CalDigit PCIe USB 3.0 host adapter...."
    So, for example, the Lacie PCIe adapters are "specific". Only works with their stuff. Originally the CalDigit PCIe adapter was the same: limited to use with their devices only. But they've altered that so that it is more generic. In fact, it was used to test the other USB 3.0 devices in the barefeats tests.
    So the CalDigit card, at least, is a more flexible choice.

  • Maximum Size of Hard Drive in Mac Pro (Early 2008)

    What is the Maximum size of Hard Drive that I can install in drive bay 3 or 4?
    Computer info below:
    Model Name: Mac Pro (Early 2008)
    Model Identifier: MacPro3,1
    Processor Name: Quad-Core Intel Xeon
    Processor Speed: 2.8 GHz
    Number Of Processors: 2
    Total Number Of Cores: 8
    L2 Cache (per processor): 12 MB
    Memory: 14 GB
    Bus Speed: 1.6 GHz
    Boot ROM Version: MP31.006C.B05
    SMC Version (system): 1.25f4
    Hardware UUID: FF121465-84A1-52F2-A94A-58A60A20F4AF

    WE don't know, all there are today are 2TB and those are fine. I think you could RAID 6 for 10TB and maybe then?
    Serious, there are none. Do you really expect to hit some ceiling?
    http://forums.xlr8yourmac.com/drivedb/search.drivedb.lasso

  • New hard drive in Mac Pro showing 0 bytes after partitioning

    I bought a Western Digital Caviar 2TB internal hard drive for my Mac Pro (2 x 2.66 GHz Dual Core Intel Xeon (late 2006), 12GB RAM, Mac OS 10.6.8). It already has two 500GB internal drives in two of the four slots.
    I slotted the new WD hard drive in and started up the Mac, getting an alert saying there was an unrecognisable disk and did I want to initialise it? Yes, so it opened up Disk Utility.
    This showed my two 500GB drives plus the new WD drive at 2TB. To initialise it I erased the disk which failed with an error ("POSIX reports: The operation
    couldn't be completed. Input/output error").
    I next decided to use Partition instead, choosing just one partition of 2TB, Mac OS Extended (Journaled). After 7 minutes it said the process had been completed and the volume was mounted, though it didn't appear on my desktop, just in Disk Utility. I thought a restart would refresh and show it on the desktop.
    Once the Mac was up and running again there was nothing there at all - and now it wasn't even listed in Disk Utility. I shut down, took the hard drive out,
    looked at it, scratched my head, replaced it, and turned the Mac back on.
    Once again I got an alert telling me the disk was uninitialised and would I like to format it, so clicked OK and Disk Utility opened. This time the disk was
    there (WDC WD20EZRX-00DC0B0) but no volume. The info said the drive had a size of 0 Bytes and I could not erase or partition as all buttons were greyed out,
    with the Partition tab saying 'this disk is too small to contain partitions'.
    So what can I do now? According to macupgrades.co.uk this drive should work in my model of Mac (they recommend and sell it, though I purchased it from NORDPC via Amazon as it was a little cheaper).
    http://www.macupgrades.co.uk/store/product_info.php?products_id=532
    I tried, with the help of my more computer-literate brother, to erase the disk from the command line via the Terminal, getting a result of "Error: 6: POSIX
    reports: Device not configured". (Actually we first tried to reformat it, with an error of "does not appear to have a valid file system format").
    Does anyone with more knowledge of such things have any ideas or advice? It would be much appreciated.

    Unless the drive and sled are not inserted properly - unlikely - or that other drives don't work in that slot - watch out if true, unlikely but loose SATA cable - it IS a bad drive.
    If you don't have a PC, setup Windows VM and use WD Lifeguard which is excellent and tests for things like bad SATA cable communicating.
    You could also - I always use Partition tab btw - go in there and set it to exFAT and Windows Master Boot Record. All you want is a good drive. This one is not.
    GUID tests first and last 10,000 sectors or more to insure that the partition tables and hidden areas work (they are not it is failing). Use to be that a "backup volume information block" was treated as optional if any sectors failed, now it is not.

  • Going into my hard drive causes mac pro to lock up like fort knox

    Hi, I have been a mac user for just a hair over a year.(Apple will not help me with anything)
    All has been swell until now.
    If I go into my hard drive my computer locks right up. I can do
    nothing to move it along. The only option I have is to hold down the
    power button for six seconds, which kills me and the computer a little
    each time. I booted up the computer using the mac install disc and I
    used disk utility to "repair" the disk. It reported the disk was "OK".
    I thought swell, and went into documents on the hard disk and it
    locked my computer up again. I let it sit there for an hour and
    nothing moved. apple/option/esc does not do anything. I went into time machine and
    went to the documents there and it locked up the computer too. I went into finder and went to documents and it locked up the computer. I went into other areas of the hard drive and it locked up the computer. The funny thing is I can go on the internet, use programs, read email, and everything works fine. Can anyone guide me in
    the right direction in solving this problem I am facing?
    Specs:
    Model Name: Mac Pro
    Model Identifier: MacPro2,1
    Processor Name: Quad-Core Intel Xeon
    Processor Speed: 3 GHz
    Number Of Processors: 2
    Total Number Of Cores: 8
    L2 Cache (per processor): 8 MB
    Memory: 8 GB
    Bus Speed: 1.33 GHz
    Boot ROM Version: MP21.007F.B06
    SMC Version: 1.15f3
    troubled drive:
    ST3750640AS P:
    Capacity: 698.64 GB
    Model: ST3750640AS P
    Revision: 3.BTH
    Serial Number: 5QD1P*
    Native Command Queuing: Yes
    Queue Depth: 32
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk0
    Bay Name: "Bay 1"
    Mac OS 9 Drivers: No
    Partition Map Type: GPT (GUID Partition Table)
    S.M.A.R.T. status: Verified
    Volumes:
    Macintosh HD:
    Capacity: 698.32 GB
    Available: 328.75 GB
    Writable: Yes
    File System: Journaled HFS+
    BSD Name: disk0s2
    Mount Point: /
    second drive:
    SAMSUNG HD753LJ:
    Capacity: 698.64 GB
    Model: SAMSUNG HD753LJ
    Revision: 1AA01112
    Serial Number: S13UJ1CQ6***
    Native Command Queuing: Yes
    Queue Depth: 32
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk1
    Bay Name: "Bay 2"
    Mac OS 9 Drivers: No
    Partition Map Type: GPT (GUID Partition Table)
    S.M.A.R.T. status: Verified
    Volumes:
    Boot OSX:
    Capacity: 128 MB
    Writable: Yes
    File System: HFS+
    BSD Name: disk1s3
    Mount Point:
    <Edited by Moderator>

    Sounds like itneeds some good basic maintenance and troubleshooting. Stop using this drive. Start trashing temp files, and off loading good files.
    Everytime you freeze and do a hard restart, the chance that the journal, directory, file system and data are compromised increases, in spite of the "OKAY" from Disk Utility's repair routines it is not reliable. And leads to false sense of security. Disk Utility only checks the basic directory, not the files themselves.
    It may be something like a damaged Finder plist/preference, or worse, but either you look for an easy fix, or just start cleaning up and moving files and system to a good drive and system.
    You may have bad blocks on your drive causing all this. Or not. TechTool can detect bad sectors, but not map them out. (Deluxe is part of AppleCare; or Pro, commercial version).
    Start using SuperDuper if you don't already, and Disk Warrior, premiere for disk repairs.
    http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
    What you need to be doing is rebuild your system from the foundation up.
    You may need to check out Data Rescue II demo from Prosoft Engineering to recover files.
    I would begin by installing OS X on another drive, or restoring from TimeMachine. Create/name an "emergency" boot drive partition. Doesn't need to be that large. Keep it handy just for doing repairs and maintenance. Keep another as a clone of your working system and backup - in addition to TimeMachine.
    You may want to start by erasing the drive (not just the OS volume) with a 7-way write (not just zero all, it does NOT do a reliable safe job mapping out bad blocks) and restore from TimeMachine. Or work with a new drive.

  • External hard drives for mac pro, external hard drives for mac pro

    my laptop always says there is not enough space and I notice my hard drive it out of room, what would be a best external hard drive that will support the Mac Book Pro?

    huge storage, low cost, high quality, very small and portable.
    BEST FOR THE COST, Toshiba "tiny giant" 15mm thick  2TB drive (have several of them, lots of storage in tiny package)    $100
    http://www.amazon.com/Toshiba-Canvio-Connect-Portable-HDTC720XK3C1/dp/B00CGUMS48    /ref=sr_1_3?ie=UTF8&qid=1390020791&sr=8-3&keywords=toshiba+2tb
    best options for the price, and high quality HD:
    Quality 1TB drives are $50 per TB on 3.5" or  $65 per TB on 2.5"
    Perfect 1TB for $68
    http://www.amazon.com/Toshiba-Canvio-Portable-Hard-Drive/dp/B005J7YA3W/ref=sr_1_ 1?ie=UTF8&qid=1379452568&sr=8-1&keywords=1tb+toshiba
    Nice 500gig for $50. ultraslim perfect for use with a notebook
    http://www.amazon.com/Toshiba-Canvio-Portable-External-Drive/dp/B009F1CXI2/ref=s    r_1_1?s=electronics&ie=UTF8&qid=1377642728&sr=1-1&keywords=toshiba+slim+500gb
    *This one is the BEST portable  external HD available that money can buy:
    HGST Touro Mobile 1TB USB 3.0 External Hard Drive $88
    http://www.amazon.com/HGST-Mobile-Portable-External-0S03559/dp/B009GE6JI8/ref=sr    _1_1?ie=UTF8&qid=1383238934&sr=8-1&keywords=HGST+Touro+Mobile+Pro+1TB+USB+3.0+7 2 00+RPM
    Most storage experts agree on the Hitachi 2.5"
    Hitachi is the winner in hard drive reliability survey:
    Hitachi manufacturers the safest and most reliable hard drives, according to the Storelab study. Of the hundreds of Hitachi hard drives received, not a single one had failed due to manufacturing or design errors. Adding the highest average lifespans and the best relationship between failures and market share, Hitachi can be regarded as the winner.

  • Installing SATA (parallel?) hard drive in mac pro

    is there a way to install my old ATA (is this called parallel) hard drive into my mac pro? i know i can't put it in one of the SATA slots, but how about the second drive bay or something?

    While the screws fit into hard drive screw threads they're largely useless as the mounting holes for a 5.25" optical drive do not match that of a 3.5" hard drive. If you want to do any screwing in on the drive you will at a minimum require a 3.5" to 5.25" conversion bracket. Even then the mounting can be tricky do to the short cable and likely misalignment and the connector to that of the optical drive above it.
    While the installation of a drive is not difficult the mounting of it, especially if you want it nicely done, can very well be.

  • Installing new hard drive in Mac Pro - question about compatibility.

    I'm looking to install an extra internal hard drive in my 2009 Mac Pro, but I need to know if there are any compatibility issues with newer hard drives. I am looking at the Western Digital WD1002FAEX Caviar Black:
    http://www.amazon.co.uk/gp/product/B0036Q7MV0/ref=s9_simh_gw_p147_d0_g147_i1?pf_ rd_m=A3P5ROKL5A1OLE&pf_rd_s=center-2&pf_rd_r=1HY9SF4S3JFEA79TK610&pf_rd_t=101&pf _rd_p=467128533&pf_rd_i=468294
    Would anyone be able to tell me if this is likely to be compatible with my 2009 8 core Mac Pro? Or if there is anything I should be looking out for in particular? I know pre-installed hard drives are 3GB/s and the above hard drive is 6GB/s, does this matter?

    Any SATA drive
    About urls:
    http://www.amazon.co.uk/gp/product/B0036Q7MV0/
    is all that is needed.
    For a bit more, WD1502FAEX WD Black 1.5TB
    http://www.wdc.com/en/products/internal/enterprise/

  • Installing windows on dedicated hard drive on Mac pro

    Hi
    I would like to install windows vista ultimate on its own hard drive on a mac pro- but I haven't been able to do it. I tried using boot camp but when it comes time to install windows on a specific partition I receive an error message that it won't install because the drive is not formatted to NTFS. On the other hand there seems to be no way to format to NTFS either through the Mac os or the windows installation dvd prior to this step- catch 22!!
    Any help is welcome.

    Hi danton,
    that's odd since Vista is supporting the GPT partition type.
    If I remeber correctly from another post from you, you have a full Retail version of Vista which includes the 32-bit and the 64-bit version, right ?
    Are you trying to install the 64-bit version when this error occurs ?
    If so, power down your Mac Pro and pull out all drive bays/harddisks leaving only the one harddisk in on which you wanna install Vista.
    Then boot your MP of the Vista DVD and try to install.
    (That's an old trick courtesy of 'the hatter').
    MAybe it helps.
    Stefan

  • Transferring WD Mybook Firewire Hard Drive to Mac Pro

    Hello,
    I was having problems loading my first My Book 500GB onto my computer. It turns on when I plug it in, but I can't get it to show up on my desktop, or disk utility with either firewire or USB. I'm pretty sure its the casing because I have an identical My Book that works fine.
    I am wondering if I can pull the hard drive from the casing, and throw it into the mac pro? I've already pulled apart the casing, but decided to post this question first to see if anyone thinks this is a terrible idea. I tried searching for similar posts to no avail.
    Thanks for your help.
    Dustin

    Is it a SATA drive or an IDE drive (in the case?)
    If it is IDE (the connector is 3/4 the width of the drive) then get a cheap ATA to USB (or better, Firewire) case locally and use that case. You are probably right it is the ATA/USB bridge chip. These drives get discussed, not positively, a lot.
    If it is SATA then you can put it in the Mac Pro in a spare sled.

  • Hard Drive for Mac Pro Questions

    Hi, I have 2, 600GB hard drives (Approximately) in my Mac Pro. 1 is for Windows Vista, the other is for Leopard. I'm running low on storage space on the Mac Side. I customized my Mac Pro when I bought it off the Apple Site.
    I would like to add another hard drive to my Mac so I have more storage space, 600 GB would be a good size. Would this Hard Drive work? http://store.apple.com/us/product/MB983ZM/A.
    I've never installed a hard drive in a computer before. Is it safe to do? is it difficult? My only fear is somehow messing up my mac.
    I would like the new hard drive to only be used on my Mac Side running Leopard (not Windows Vista). how would I do this?
    Any info is greatly appreciated. Thanks

    Thanks guys. I have a couple more questions, I'll be purchasing a 1TB Hard Drive. Why are the hard drives much more expensive from the Apple Store than from Amazon? Is it safer to pay more money and buy the hard drive from the Apple Store than from Amazon?
    After I install the Hard Drive will I see a New Hard Drive Icon on my Desktop?
    How do I tell the computer that the new Hard drive will be used only on the mac side and not the Windows side?
    When I go into Disk Utility to format how will I know which is the new hard drive? I don't want to accidentally format my current hard drive will all my data on it.
    How will I store data on the new hard drive?
    Any info is greatly appreciated.

  • I don't have permission to view content on hard drive in mac pro???

    I no longer wanted to use my macbook anymore, it's a 2008 model if I remember correctly the white plastic version. However, I wanted to put the hard drive I have in it into my mac pro since I have two more available slots for storage. But after I put it in I went to go try viewing it's contents and it says
    My mac pro  os x version is 10.6.8 I'm not entirely sure what my macbook is running, but it's not yosemite, most likely a version of snow leopard.
    Any ideas of what's going on? How can I get permission to view the contents?

    Try opening Disk Utility and repairing permissions on the disk.
    Next try select that disk in Finder and right click and select Get Info. Then go to Sharing and Permissions section and update/change it

  • 3 Tb hard drive in Mac Pro 2008?

    Hello
    I've bought a 3Tb Western Digital Caviar Green Hard Drive, put it in a Welland enclosure, formatted it with Windows 7 into three partitions (all exFAT), two just over 1 Tb and the third only 32 Gb. I was hoping that my Mac Pro 2008 would be able to see it, but no. Any hints?
    Cheers
    Morrie K

    anything written about "max drive capacity" was pure nonsense and marketing based on just what was available at the time and meaningless. there are no such limits and it would fly in the face of SATA and GUID
    Apple implemented GPT back in 10.4.6 (earlier but very hard to know and test too)
    You can throw some 4TB drives in there.
    The only product that does not: Apple Pro RAID card! it is limited to 2.2TB drives.

Maybe you are looking for