IMac harddrive S.M.A.R.T. errors when trying to upgrade from snow leopard to mountain lion

When I try to install OS X Mountain Lion on my 2010 iMac version 10.6.8 I get a message that says "This disk has S.M.A.R.T. errors. This disk has a hardware problem that can't be repaired." Is there a way to fix this? Is apple just trying to get me to buy a new computer?

The S.M.A.R.T. diagnostics that are built into your hdd are designed to warn of impending hardware failure.
Take a look at this Wikipedia article... http://en.wikipedia.org/wiki/S.M.A.R.T.
You may be able to use Disk Utility to run the Repair Disk routine and get the drive to map out any bad sectors that might be causing some problem. And the drive may perform well again for a while. But once a disk begins to display performance degradation because of a hardware issue, it's only a matter of time before it fails.
I think the best thing for you to do is to back up your data and replace that drive ASAP.
Drives are relatively inexpensive mechanisms and they will all fail sometime. And never at a good time.

Similar Messages

Multiple errors upgrading from snow leopard to mountain lion

While attempting to upgrade on an early 2008 Mac Pro, I received the "could not create recovery disk" error on install and had to abort the upgrade. I found online a suggestion of decreasing the size if the main partition (I have no other partitions on the system drive) by a little so that 10.8 can create the recovery drive. When I went I do this it started the process then gave me the error that "I need a newer version of OS X" to complete the task.
I can't create the partition 10.8 needs because I don't have 10.8?
I desperately need a workaround. Any insight would be greatly appreciated, I can offer more details if needed. I do know that the system drive is not a RAID volume, and apples page concerning this error didn't seem to apply to doing an upgrade like this.
Thanks all for your help!!

I followed these steps. install gave me the same errors. as far as creating a recovery system goes, since im in snow leopard, i could only intall mountain lion on an external drive. im not sure that really fulfilled the requirements of creating the recovery hd i needed, coulndt find instructions on simply creating a recovery HD on an eternal disk. i did also notice that my internal mac HD system drive is HSF+, or so it appears. could that be the trouble all along?
EDIT: Just reconfirmed as Macintosh HD - Mac OS Extended journaled), so scratch that. i guess im just having trouble "creating a recovery HD" i cannot get the recovery assistant app, because im on snow leopard

Problem activating Facetime on iMac: I recently upgraded my iMac from Snow Leopard to Mountain Lion. Since the upgrade, when I try to sign on with my valid Apple ID

Problem activating Facetime on iMac: I recently upgraded my iMac from Snow Leopard to Mountain Lion.
Since the upgrade, when I try to sign on with my valid Apple ID & password I get this message "The server encountered an error processing registration. Please try again later."
I have tried (again later) repeatedly without success. PLEASE HELP!

Why am i getting an error when trying to upgrade from 10.7.5 to 10.9

when i try and upgrade from 10.7.5 osx lion to 10.9 i get an error, i have 2GB of memory and 144MB of storage. can someone help?

This would indicate that your MacBook Air does not meet the requirements for Mavericks.
To install Mavericks, you need one of these Macs:
iMac (Mid-2007 or later)
MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
MacBook Pro (13-inch, Mid-2009 or later),
MacBook Pro (15-inch or 17-inch, Mid/Late 2007 or later)
MacBook Air (Late 2008 or later)
Mac mini (Early 2009 or later)
Mac Pro (Early 2008 or later)
Xserve (Early 2009)
Your Mac also needs:
OS X Mountain Lion, Lion, or Snow Leopard v10.6.8 already installed
2 GB or more of memory
8 GB or more of available space

Error when Trying to Upgrade from 8.1.7.4 to 10.2.0.3

Hello -
I am getting this error, when attempting to run the ultu102i script in preparation for an upgrade to 10g:
SQL> @utlu102i
DECLARE
ERROR at line 1:
ORA-01403: no data found
ORA-06512: at line 1560
I have upgraded many databases to 10g from 8i, and have never seen this error before. I have the database started as 8i, and my environment set up as 8i (ORACLE_HOME, etc), and then I try to run teh utlu102i script that is within the /rdbms/admin directory of the 10g software home location.
Any ideas are greatly appreciated.
Thanks!

edit the utlu102i and utl102x.sql scripts and comment out the following two statements.
SELECT value INTO db_undo FROM v$parameter
WHERE name = 'undo_management';
SELECT value INTO db_undo_tbs FROM v$parameter
WHERE name = 'undo_tablespace';
this ones in metalink, i came accross it when upgrading to 10.2.0.3 i think its a new bug in this pathcset.
metalink noteid is: 407031.1
Message was edited by:
chris_c

I want to upgrade to Lightroom 5, but I'm concerned about compatibility with my 2008 intel Core 2 Duo iMac with only 4G of Ram. Will I be able to run Lighroom 5 if I upgrade from Snow Leopard to Lion?

I want to upgrade to Lightroom 5, but I'm concerned about compatibility with my 2008 intel Core 2 Duo iMac with only 4G of Ram. Will I be able to run Lightroom 5 okay if I upgrade from Snow Leopard to Lion? What will happen to the applications that aren't 64-bit compatible? Also the Eye-one Display 2 colorimeter to calibrate the monitor will not run on Lion, so that will be an expensive upgrade to an i1DisplayPro. Is the upgrade important enough to offset the expense? I have an Epson R2000 printer. Will there be problems with the drivers if I upgrade to Lion? It would be great to hear from other mac users who are also photographers and who print their own photos.

Before upgrading to Lion be sure to read this link:
https://discussions.apple.com/docs/DOC-6271
Adobe lists these requirements:
http://www.adobe.com/products/photoshop-lightroom/tech-specs.html
Looking at http://www.everymac.com/ even the earliest 2008 iMac was fully 64 bit, even though Boot Camp doesn't support 64 bit Windows on that machine.

Upgrade from snow leopard 10.6.8 to montain lion on a iMac system won't boot getting a crossed out circle

Upgrade from snow leopard 10.6.8 to montain lion on a iMac system won't boot getting a crossed out circle

Clean install OS.10.6.8 update it completly. May be you ignored some firmware update.
I have two incedents.
My thunderbolt port stopped working after upgrading to ML 10.8. I booted from external 10.6 , 10.7 still didnt work. Then i clean installed 10.6.8 and ran software update it updated the thunderbolt firmware and all is well now. This firmware update for some reason didnt show up in ML 10.8.
Secondly , when i upgraded my Brother's Macbook from 10.5 to 10.6.3 it would install but stuck with crossed out circle. Then i downgraded checked for update found an efi update , then the 10.6.3 worked fine.

I have paid and downloaded LION and want to update my IMAC, can i just run install and it keep photos settings etc from Snow Leopard or is a full reinstall with wiped hard drive, anyone have any experience of this and do i need to run a backup beforehand?

I have paid and downloaded LION and want to update my IMAC, can i just run install and it keep photos settings etc from Snow Leopard or is a full reinstall with wiped hard drive, anyone have any experience of this and do i need to run a backup beforehand?

Always backup your important data before upgrading to a new Mac OS X.
Lion doesn't erase the drive but better to be safe than sorry.
And run Disk Utility (Applications/Utilities). Verify and if necessary repair the startup disk before upgrading.
Using Disk Utility to verify or repair disks
Before upgrading read here > Lion upgrade questions and answers: Apple Support Communities
And here > What applications are not compatible with Mac OS X 10.7 "Lion"? What upgrade or substitute options are available for common incompatible applications? @ EveryMac.com

There is an error when trying to upgrade to Mavericks from OX Lion

There is an error when trying to upgrade to Mavericks from OX Lion

So whenever i click on "free upgrade" ..that message shows up next to it..

I have upgraded all apps from CS5 to CC - but keep getting U43M1D207 error when trying to upgrade Illustrator. Tried twice. Help!

I have upgraded all apps from CS5 to CC - but keep getting U43M1D207 error when trying to upgrade Illustrator. Tried twice. Help!

You can also use Download New Adobe CC Trials: Direct Links (no Assistant/Manager) | ProDesignTools
Direct Download Links for Adobe Software
Are you on a managed network. If yes please refer the Knowledge base article: http://helpx.adobe.com/creative-cloud/help/cc-desktop-download-error.html.
You may even try the direct download: http://prodesigntools.com/adobe-cc-direct-download-links.html.
Kindly follow the very important instructions before download.
It might help you.
Regards
Rajshree

My Imac fails when I try to upgrade from Snow Leopard 10.6.8. I have to boot up from disk. Does anyone know how to overcome this problem?

My iMac fails when I try to upgrade from Snow Leopard 10.6.8. I have to boot up from disk. Does anyone know how to overcome this problem?   I need to upgrade in order to install latest software.

It would be lovely to know what your talking about. Upgrading from Snow Leopard does not involve discs.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase a redemption code at the Online Apple Store: OS X Mountain Lion. Mountain Lion is $19.99 plus tax. Use the code to redeem a download of Mountain Lion from the App Store. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later.
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model
             Identifier 5,1 or later.
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later.
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later.
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later.
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later.
         7. Xserve (Early 2009) - Model Identifier 3,1 or later.
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
Upgrading to Yosemite
You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
Upgrading to Yosemite
To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    OS X Mavericks/Yosemite- System Requirements
    Macs that can be upgraded to OS X Yosemite
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.

Consistent 8007 error when trying to download from iTunes / App Store on my iMac.

Hi I get a consistent 8007 error when trying to download on my iMac. Yet can download and it works fine via Apple TV. I'm also having issues downloading on the App Store. I've checked the date and time, firewall and everything else seems to be fine. I can't uninstall iTunes as am running OSX 10.8.4 and am not tech confident enough to run this via terminal. Help!

I tried switching off Apple tv and when reconnected after 30 sec. Or so, it continued downloading

I want to upgrade from snow leopard to Yosemite all at one time. is this a good idea on my imac 8.1 using OS X 10.6.8?

I am using snow leopard on a mac 8.1 can I up grade in one step to Yosemite or should I up grade to an earlier OS first?

Yes, you can jump to Yosemite directly. Before you do be sure your computer is compatible:
Upgrading to Yosemite
You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
Upgrading to Yosemite
To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    OS X Mavericks/Yosemite- System Requirements
    Macs that can be upgraded to OS X Yosemite
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
I would also suggest you do the following before installing the upgrade:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

Want to upgrade from snow leopard to lion, need to purchase an external harddrive to b/u my stuff. will formating for snow leopard be ok when uploading to the new system (lion)?

oh sorry, I thought that was where we put the question I am on an extremely tight budget, but since I do shift work, I wanted to use the iCloud funciton to keep my calendars uptodate on my pc/mac mini/and iphone. Wish there were a way to do it for free on my snow and snow leopard OS, but sinc e I cannot, I am wondering about formatting the external harddrive (which I have to purchase). If I format for the snow leopard, will there be a problem re installing the information into the new snow leopard OS machine? Also, I am wondering about the older Mac Pro I have that is the OS before snow leopard (Snow, I believe) will I be able to use this same HD for backing it up to upgrade it (at a later date)?
Thank you for your help.
Deb

so sorry, I mean uploading information from the back up (ex HD) onto the new Snow Lion OS. (and later doing the same with the Mac Pro which is the system before snow leopard.) TY

IMac shuts down when trying to upgrade from Tiger to Leopard

My iMac, purchased in November of '07, came installed with Tiger but also came with a Leopard OS update disk. When trying to upgrade to Leopard last week, every time I rebooted off the disk the computer would run for a minute in the gray screen and then suddenly shut off with no warning message. I checked HD in disk utilities, repaired my permissions and tried again with the same results. I've got 30 gigs of free space and 4 gigs of RAM which should be plenty. I talked to Apple support who walked me through the installation procedure with the same results and ended up shipping me a new install disk which came today. I am getting the same shut down on reboot with their replacement disk. Apple actually sent me two white disks. The first is labeled "For Mac Computers, Mac OSX Install disc 1" The second is labeled "MacBook, Mac OSX Install Disc 2" Since the second disc is label "MacBook" is it possible they sent me the wrong set of discs?
Thanks

rk87,
Thanks for replying. I have a 500 gig hard drive which yields a 465gig usable capacity, so, at 30 Gigs available, I don't have 10% of the drive free. This may be an issue, but my more immediate problem is that I can't get the install disk to boot up at all.
I called apple support again see what I could find out about the install disks which wouldn't work. The support guy seemed like he had a lot of knowledge about the system and suggested trying the Tiger install disk (that came with the machine) to see if it would boot up, which it did. After that success, I tried the Leopard update disk in another iMac I have at home and it worked as it should. Since the disk worked fine on the other mac, the guy at tech support speculated that there is some sort of hardware issue causing the install shut down on the computer in question.
His speculation was about the memory installed in the machine which might be the issue. I had bought the computer from an Apple Authorized store here in town who upgraded the RAM to 4GIGs using third-party memory. Even though the memory seems to have functioned properly for the past year, apple support says that there could be some sort of incompatibility with the third party product causing the install disk not to work.
Apple support told me about running a memory diagnostic off of the Tiger install disk by rebooting with the disk in the computer and hold down the "D" key. After I got off the phone I ran the test which turned out to take an hour in its long version. The test indicated no problems, but apple had told me that it might not be totally conclusive. At this point, I'm taking the computer back to the store where I bought it and will let them figure it out.

IMac harddrive S.M.A.R.T. errors when trying to upgrade from snow leopard to mountain lion

Similar Messages

Maybe you are looking for