IMac having trouble finding ISP.

iMac (10.7.4) is too often slow in connecting to a link.  About half the time, it is in "connecting" mode until it times out.  I get a "Can't find the page" window.  If I run System Preferences Diagnostic Assistance, I can see that there are three green lights on top, but it is getting hung up on ISP, which is red lit.  I go through the process of selecting a network, after which I see the wi-fi reset itself.  It very quickly and temporarily goes to a panel saying "No IP Address" and then pops back to "wi-fi connected".  At that point, if I click on "Try Again", it will work successfully.
It MUST be the correct IP address or it would not successfully find it the second time.  I do not understand why it is failing so often, nor what to do about it.  Suggestions?
Thanks!
Ed Hooks
<Email Edited By Host>

Right click on the title of any of the other sections (Basic, etc.) and put a check next to "Adjustments".

Similar Messages

  • I'm having trouble finding firefox sync on my desktop and to download to my ipad2 for schoolwork!

    I'm having trouble finding firefox sync on my desktop AND getting it over to my ipad2. I've been through all the support and still can't find it. Please help! I need it for my schoolwork!

        Mam129, I rely on email to stay connected with family and friends so I know how important it is to be able view them on my phone. But don’t worry because I’m here to help.
    Are you still unable to set up your email? A fix for the issue has recently been implemented. Please try setting up the email again and keep me posted if you have any issues.
    John B
    Follow us on Twitter @VZWSupport.

  • I want a soundbar for my 6th generation nano but am having trouble finding a compatible device. I'd like more than a dock, ideally a soundbar with wireless subwoofer. I'll only use the soundbar for music, not TV home theater. Any suggestions?

    I want a soundbar for my 6th generation nano but am having trouble finding a compatible device. I'd like more than a dock, ideally a soundbar with wireless subwoofer. I'll only use the soundbar for music, not TV home theater. Any suggestions? Thanks.

    Google

  • I'm having trouble finding the HEALTH magazine app for my iPad.  The mag insists that it has a free app.  Help!!

    I'm having trouble finding the HEALTH magazine app for my iPad.  The mag insists that it has a free app.  Help!!

    What country are you in ? Is this the app : Health magazine ?

  • I'm having trouble finding carton hd on the app store

    I'm having trouble finding carton hd on the App Store

    Just a guess, are you looking for this:
    https://itunes.apple.com/us/app/cartoon-h.d-wallpapers/id535109714?mt=8

  • I have Final Cut Pro X (10.0.9) and would like to change my project settings but I am having trouble finding the 'Modify Settings button.'  Where exactly is it located?

    I have Final Cut Pro X (10.0.9) and would like to change my project settings but I am having trouble finding the 'Modify Settings button.'  Where exactly is it located?  Here is the link which gives the instructions but doesn't seem to say where the 'Modify Settings Button' is located: http://support.apple.com/kb/PH12526?viewlocale=en_US

    You have to choose – one settigf or another.
    The thing is.your HD clips will look better in an SD project than your SD clips will in an HD project.
    WIthout knowing much more about your project and the kind of content, it's really hard to be specific. But generally I'd let my project settings be guided by what fraction of my timeline will be made up of HD clips and how much SD clips. If it's 75% HD, I'd probably do an HD project…and so on,
    Good luck.
    Russ

  • I would like to print a four sided programme, but am having trouble finding out how to organise the sections onto a 17  by 11 paper with the sections in the right order. Any help?

    I would like to print a four sided programme, but am having trouble finding out how to organise the sections onto a 17  by 11 paper with the sections in the right order. Any help?

    If all you are going to do is print double sided and them make
    a single fold reducing the page to 8 1/2 x 11, one side of the
    original 17 x 11 page will be page 4 on the left as you hold
    the page facing you and page 1 on the right, reverse side
    should be printed so top is same as top on the the first side
    and will be page 2 to the left and page 3 to the right. Pick
    up the double sided document with pages 2 and 3 facing you, fold
    left edge to meet right edge; you should now have fold on the left
    with page 1 facing up toward you, turn the page as you normally
    would and pages 2 & 3 should be in order, and one more turn brings
    you to page 4 and the fold should know be on the right. I hope this
    explains clearly enough - if not, post back and some one should
    join in with a better explanation.

  • I have a MacBook Pro2,2 with an Intel Core 2 Duo , 2.33 GHz processor speed and am running OS X 10.4.11 and am having trouble finding which operating system update my computer will support?

    have a MacBook Pro2,2 with an Intel Core 2 Duo , 2.33 GHz processor speed and am running OS X 10.4.11 and am having trouble finding which operating system update my computer will support. Any advice?

    Mac OS X 10.7.5, which requires getting a Mac OS X 10.6 DVD from the online Apple Store and a download code for 10.7 by phoning them.
    (73160)

  • "Hmm we're having trouble finding that page" error message

    Hi all,
    There is a known issue where many pages are returning a "Hmm we're having trouble finding that page" 
    Our team is working on this issue right now. When we know, I will update this thread.
    Sorry for the inconvenience,
    Joe

    I've been catching up on The Office online through my xfinity streampicks subscription, but now I get an error message saying "Hmmm, we're having trouble watching that page." I just watched an episode yesterday, and the last season JUST ended at the beginning of the summer. Is it really gone from streampicks??

  • I am having trouble finding the Accept button for my licensing agreement and would like to accept.

    I am having trouble finding the Aceept button for my licensing agreement and would like to accept.

    Well, it's probably below the table... Sounds like you didn't consider the system requirements and installed on a system with too small screen resolution. If so, only using a larger res may possibly revela the magic button...
    Mylenium

  • Having trouble finding Character viewer

    I am having trouble finding the Character Viewer.  I've looked in the Launchpad and also in Finder under Applications.  If I accidentally sent it to the Trash and emptied it can I reinstall?
    OS X 10.8.5

    Actually I'm not looking for the Font Book , I'm looking for the Character Viewer.  FontBook I can find and it does not appear to give me what I want.  I was already using the Character Viewer quite a bit for a while, using it to find the pi sign, upside down exclamation points, fractions, foreign currency symbols and stuff like that.
    I suspect I turfed the app without realizing what I was doing at the time.  This is my first Mac and I am still acclimatizing to it.  Like I said, it can't be found in Finder under Applications so I'm thinking it must be missing.

  • I would like to know why the apple devices 5s and mini i pad having trouble finding wifi networks

    I would like to know why the apple devices 5s and mini i pad having trouble finding wifi networks

    That all depends on what troubleshooting steps you've tried.
    What troubleshooting steps have you tried?

  • I'm having trouble finding twisted-web

    I am running x86_64 and trying to install the twisted-web package and I am having some trouble finding it.
    I used the package search on the archlinux.org main page and I found a  match, but when I try pacman -Sy twisted-web I get "error: 'twisted-web': not found in sync db".
    I noticed that it is supposed to be in the extra repository so I checked my pacman.conf and "Extra" is properly configured (and I have installed packages from it before).
    I checked the PKGBUILD that was online and it supports x86_64, I then checked my abs directory to see if the PKGBUILD was there (under my /var/abs/extra/network directory) and I found "twisted" but no "twisted-web".
    I also searched AUR for twisted-web and came up with nothing, and I assume this is because it is already in the extra repository.
    I am new to Arch and I cannot think of anything else to do.  My only other thought is that the package page says "out-of-date" so maybe it has been removed from the extra repository or something along those lines, but that seems like a strange thing to do.
    Anyway I really like arch and I have looked at several PKGBUILD's already so if its just a matter of making a build for a new version that would be no problem for me to do (and submit it to AUR or a maintainer) I just need a little guidance.  Chances are I'm just inexperienced and missing something really obvious.
    Thanks for reading
    -pilo

    Thanks thats really helpful, what confused me was that when I searched for twisted-web from the main page then clicked -> view cvs entries -> pkgbuild -> view, the PKGBUILD there had "arch=(i686 x86_64)" so I thought I should be able to install it.
    Im realatively experienced at compiling programs and programming myself so I will take a stab at getting it to compile myself and submit a new PKGBUILD if I get it working.
    Thanks a lot for your help, im really liking arch.

  • Imported pics from old iphoto now am having trouble finding them on my HD..

    hi there,
    so here is my situation. I previously was using iphoto (from '05) and had several thousand photos, but last month one day when i opened iPhoto 95% of the photos were gone from iPhoto (my computer kept shutting off, power supply problem), but I could still find all of my photos on my HD under my username/pictures.
    in any case, i just got a new mac with iphoto '09 and my local tech friend managed to get all of my old photos onto my new computer by creating a new folder (yadda yadda yadda) and all of these photos now show up in the new iphoto, but i am having a few problems, so here goes...
    1. I like to view most of my photos in the 'photos' area of iphoto (as opposed to events, faces and so on) but it seems like with the older photos many show up in both an 'originals' folder and in a dated folder. i'm guessing this has something to do with photos that were edited or something of the sort. ideally, i'd just like to see one of everything. is this possible? also, of the 10K+ things moved onto the new iphoto were a number of movies uploaded from my camera. all of these show up in 'originals' wereas in the dated folders the show up as jpeg stills. why is this?
    2. my biggest/most annoying problem has to do with newly uploaded pictures. actually uploading them is fine (they all go into 'untitled events' folders as opposed to the 'originals' or dated folders like all the others) it's just that i'm having trouble accessing them on my HD once they're on iphoto. in short, i email a lot of photos using hotmail. when uploading i'll typically go to macintosh hd / jeremiahpOLD(everything from old computer) / pictures / iphoto libary 2 (created to put all old photos) and they're all right there by date. but all my new photos that i'm uploading, which i thought would show up in the same place separated by date, aren't showing up. if i search for them on my HD the location shows up as 'jeremiahpOLD / modified / 2010 / date. so, i guess my big question is, how do i get newly uploaded photos to show up in the 'pictures' folder as opposed to the 'modified' folder (where i can't access them unless searching for a particular on my HD or thru iphoto)?
    sorry, for the rambling. i'm just trying to figure this all out at once...it's very different from my old iphoto!
    thanks in advance,
    Jeremiah

    iPhoto changed the way we access photos with iPhoto 7 (08) when the library folder became a package. Using the methods Larry linked you to will provide you with access to your photos for use outside of iPhoto. Another version of Terence Devlin's treatise with screenshots is shown below. The following is from one of Terence Devlin’s posts on file access for use outside of iPhoto. It’s the definitive treatise on the subject.
    Since iPhoto 7 (iLife 08) the old iPhoto Library Folder is now a Package File. This is simply a folder that looks like a file in the Finder. The change was made to the format of the iPhoto library because many users were inadvertently corrupting their library by browsing through it with other software or making changes in it themselves.
    Accessing the iPhoto Library Folder directly has never been supported in any version of iPhoto.
    There are many, many ways to access your files in iPhoto:
    For Users of 10.5 and later
    You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
    Uploaded with plasq's Skitch!
    (Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
    You can access the Library from the New Message Window in Mail:
    Uploaded with plasq's Skitch!
    For users of 10.4 and later ...
    Many internet sites such as Flickr and SmugMug have plug-ins for accessing the iPhoto Library. If the site you want to use doesn’t then some, one or any of these will also work:
    To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
    This is also true for emailing with Web-based services. However, if you're using Gmail you can use iPhoto2GMail
    If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
    If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
    If you want to access the files with iPhoto not running:
    For users of 10.6 and later:
    You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu. Using the Services Preference Pane you can even create a keyboard shortcut for it.
    For Users of 10.4 and later:
    Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
    Other options include:
    1. Drag and Drop: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
    2. File -> Export: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
    3. Show File: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
    You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.
    All of the above are a: faster and b: Safer than rooting around in the old Library Folder.
    OT

  • Hi Having trouble finding my effects tab. Also cannot see my imports;

    I think i may have clicked something, But i just want my Adobe Premiere Pro to look like it did when i first installed it.  I cannot find my "effects" tab in the lower left where the "files" and "markers" should be. And also im having trouble locating my files after they are imported. Please Help

    Hi Jseay707,
    Try to right click on the image from the project bin and choose new sequence from clip and then check.
    It might be an issue with incorrect sequence setting, check the image dimensions as well as the sequence settings.
    Thanks

Maybe you are looking for

  • Smart View compile error on startup

    Hi Just installed the following components: - Windows 2008R2 - Office 2010 x64 with SP2 - Smart View 11.1.2.5.210 (x64) When I start and close Excel I get the following: Microsoft Visual Basic for Applications Compile error in hidden module: HsTBarPu

  • How do I Open a Vi reference to and run a Polymorphic VI?

    In my case, I was trying to use a PolyVI Refnum to an instance of PID.vi. Even though I set the inputs for some of the controls, I have no output.the Invoke Method of 'Run VI' does not return an error. The Invoke Method of Ctrl Val. Get All does not

  • Why can't I log into my "Local" sql server (sql server 2014) with my Sql Server Authentication UID ?

    I just got a new work station (win7 Pro) which has the following sql server SELECT SERVERPROPERTY('productversion'), SERVERPROPERTY ('productlevel'), SERVERPROPERTY ('edition') returns 12.0.2254.0     RTM     Developer Edition (64-bit) Select @@versi

  • Landing page

    Hi I've designed the whole client's website structure but it's not ready yet. He got two events coming and would like a landing page that display them, leaving the rest of the pages in construction (not visible) How can I do that in Muse please ? Tha

  • How to use a method in sequence diagram from a class diagram

    Hello, can someone tell me how to use the method from class diagram in sequence diagram? so far i only can add a classifier to the object lifeline but i still cannot add the method from the class... thx