Imac host doesn't see target computer

Hello,
I'm having difficulty copying files from the host computer to the target computer. The target computer is an Imac 700Mhz G3 and the host is a 400Mhz (DV?) G3. Both are running OS 10.3.9. The problem is that the target computer does not show up on the host desktop. I've tried rebooting the host but to no avail. Is this a firewire firmware issue? How can I check the firewire firmware version? Any info would be greatly appreciated.
Thanks,
Al

Hey Al,
Have you read through:
http://docs.info.apple.com/article.html?artnum=58583
The only thing there is requirements for the target:
"iMac (Slot Loading) with Firmware version 2.4 or later"
but you've got to have 4.1.9 since you're running 10.3.9.
But to check it go to "about this Mac > more info > Hardware overview
It should say:
"Boot ROM Version 4.1.9 f1"
Try another FireWire cord.
Try different FireWire spigots
Try switching host and target wouldn't make any difference for dragging files around.
Could have a blown FireWire ( A client blew hers out with a bad cord, I mean it was smoked! Scorch marks on the board and everything. Those are easy to diagnose "Uhhh I think it's this place where it's totally burned")
Richard

Similar Messages

Migration assistant source doesn't see target

target: MAVERICKS 10.9
source: LION 10.7.5
i'm trying to use Migration Assistant to transfer from an older mac to a new one. On the new one, I can get to a page that offers a code: 'Transfer Information to this Mac'. But the older/source computer doesn't offer an opportunity to input that code as it runs the Migration Assistant -- the wheel continues to spin. File sharing is enabled on the source computer. Software is up to date.
I'm doing this transfer over WIFI since I don't have the appropriate firewire, etc.
I've tried numerous ways to get this going.
I should add:
-I am doing this AFTER completing the Setup Assistant
-source computer is a Chinese OS and the target is an English OS.
(i don't see how these points would matter but i thought best to mention them.)
any advice would be weclome.

They both need to be on the same network. Ideally on Ethernet, otherwise it might take days to copy GB's over wifi.
Here is the Apple info on the subject…
http://support.apple.com/kb/HT5872
See if that helps clarify the process.

In trying to free up memory on my C: drive,I'm trying to move iTunes to a partitioned D: drive but my iPad then doesn't "see" the computer to sync. Is it safe to erase andreload?

In trying to free up memory on my C: drive, I'm trying to move iTunes to a partitioned D: drive but my iPad then sees it as a "new" computer and won't sync without erasing and re-synching. Any suggestions?

In trying to free up memory on my C: drive, I'm trying to move iTunes to a partitioned D: drive but my iPad then sees it as a "new" computer and won't sync without erasing and re-synching. Any suggestions?

Appletv doesn't see Photos app library, why?

After updating to the new Photos app from iPhoto my apple tv doesn't see my computer's photo library. iTunes doesn't see it either to choose which folders to share for home sharing.
Is this a drawback to the new Photos app?
Thanks

iTunes is up to date, I don't even see the Photos library in the pull down on the home sharing prompt. Is it because my photos library is on an external drive? iPhoto had no problem seeing this. Do I have to go back to iPhoto or will Apple week this?

Host computer won't recognize the target computer.......

So here is a rundown of what happened....
I just bought Leopard and tried to install it on my computer. It said I did not have enough free space ( I need 11 GB, I have 1.4 available) and that it would have to delete everything on my computer to get it to install. Well, I didn't want that since not everything was backed up. Now, when I start up my computer the apple logo comes up with the spinning "sunshine rays" and then just shuts off. There is no way to get my computer to restart. I have tried using the "restart from" and selecting my hard drive and then the computer restarts, sunshine thingy spins, and then my computer turns off.
I have tried to run the disk repair only to have an error message come up half way through saying "the underlying task reported failure on exit". No idea what this means. There has to be some way for me start my computer back up or save all my files. I have bought the 1TB time capsule so that should fee up enough room for Leopard to run smoothly once I get it installed
I tried repairing it and I got the same message as I did trying to verify it. So here is another weird little tid-bit. When I try to re-install Tiger it doesn't locate my hard drive as an option to install it on. But when I use the install disk from Leopard it does locate and give me the option to install it on my hard drive. If I install Leopard and erase and format (journaled?) my hard drive in order to do so, will I be able to use any programs to recover my lost files?
So now I am trying to use my iMac as a host computer and the G4 that won't start as the target computer. I have tried everything I can think of but the host computer will not recognize the target hard drive. Everything is hooked up correctly I think and the hard drive from my bad computer should be on the desktop of my iMac but it isn't. Any ideas????

Hi-
The error report "the underlying task reported failure on exit" is a hard drive error that Disk Utility couldn't repair. However, if the Disk Utility was from the Leopard install disc, then the version is wrong. If the error came from the Tiger disc, you may need DiskWarrior to correct the error.
First, though, try repairing the hard drive with fsck.
Boot to Single user mode by holding Command+S while booting. In the resulting screen, at the command line, type /sbin/fsck -fy and press Return.
fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issue is found:
The volume (nameofvolume) appears to be OK
If fsck found issues and has altered, repaired, or fixed anything, it will display this message:
FILE SYSTEM WAS MODIFIED
Important: If this message appears, repeat the fsck command you typed until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do). Two, three or four tries may be necessary.
When fsck reports that your volume is OK, type reboot at the prompt and then press Return.
Your computer should start up normally and allow you to log in.
If the fsck returns that the drive is OK in the first pass, and typing "reboot" doesn't get a proper startup, try resetting the PRAM on the G4. Hold CommandOption+PR while booting, hold until the second startup chime, and release. The machine, hopefully will boot.
Let us know how you fare with this.....

How do I get messages to go back to an AIM account? It's only seeing the iPad's Facetime email address and not seeing the old AIM account name that is on my desktop. I am using my iMac using iChat to talk to a newer iMac that doesn't have iChat.

How do I get messages to go back to an AIM account? It's only seeing the iPad's Facetime email address and not seeing the old AIM account name that is on my desktop. I am using my iMac using iChat to talk to a newer iMac that doesn't have iChat. We had this working using Messages and Facetime (on the new machine) talking to my existing iChat account. One day last week, when Facetime rang, my kids answered on the iPad. Dang! Now it's all fouled up! The new iMac won't see my AIM account name and shows that I'm offline, because the iPad is off. We were able to call using "most recent call" in Facetime, but now I can't go and control that new iMac remotely to help with some email concerns the user is having. I'm trying to not personalize this too much, but it's grandkids talking to Grandma and Mom and Dad trying to solve new machine hiccups. Normally, I could just go in via iChat and control the other machine and troubleshoot, but I can't do it with Facetime only. My buddy list doesn't see the other computer even though we are connected on Facetime right now. My name is not highlighted for the other computer. What could have gone so wrong?
Any help would be appreciated.

How do I get messages to go back to an AIM account? It's only seeing the iPad's Facetime email address and not seeing the old AIM account name that is on my desktop. I am using my iMac using iChat to talk to a newer iMac that doesn't have iChat. We had this working using Messages and Facetime (on the new machine) talking to my existing iChat account. One day last week, when Facetime rang, my kids answered on the iPad. Dang! Now it's all fouled up! The new iMac won't see my AIM account name and shows that I'm offline, because the iPad is off. We were able to call using "most recent call" in Facetime, but now I can't go and control that new iMac remotely to help with some email concerns the user is having. I'm trying to not personalize this too much, but it's grandkids talking to Grandma and Mom and Dad trying to solve new machine hiccups. Normally, I could just go in via iChat and control the other machine and troubleshoot, but I can't do it with Facetime only. My buddy list doesn't see the other computer even though we are connected on Facetime right now. My name is not highlighted for the other computer. What could have gone so wrong?
Any help would be appreciated.

I just got an imac that doesn't have the option of a cd drive, I have my adobe suite on another computer, how do I get it on the new computer?

I purchased the adobe suite cs6 a few years ago on a cd, installed it on another computer, and now I got the imac that doesn't have a cd drive, how do I install the adobe suite onto my new computer without having to use the cd?

Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Migration Assistant problem? : New iMac's iTunes doesn't see the catalog or playlist of my old Mac's songs on an external drive

So I just migrated from a 10.7.5 iMac 27" from 2009 to 10.9.4 on a 2013 27" iMac with Fusion Drive.
I don't use Time Machine. There are no backups involved here.
Used Ethernet. Only took 20 hours... (BTW, it stayed on "less than 1 minute left" for like 12 hours but luckily I was away and just left it going in hopes it would work... and it did!)
Anyway, back on my OLD iMac, I kept all of my songs on an external drive because my internal drive was too small. So iTunes looked at that drive for the music it was playing. I turned that drive off, even disconnected it, during the migration process because I thought it was confusing it during the first attempt which took 10 hours and nothing happened.
So now it worked, finally. On my new iMac, running Mavericks, I now have two user accounts... the one that was set up when I started the computer the first time, and the new one that transferred over via Migration Assistant. No problem. I can live with that. The only thing is, I would still think the old XML files and library stuff would migrate over... but iTunes doesn't see it. When I open up iTunes, in *either* account, iTunes behaves as if it's brand new. Repeat: the old and new account on the new iMac, both, do not see an old iTunes library which IS on the old iMac. Only the music is on the external drive from what I understand.
I've done this before so I know it's possible. I remember upgrading a long time ago and got iTunes to see my old library... even though some of the music was no longer there. It just puts "!" marks wherever there is no link. I was hoping that that's what I would find when I launched iTunes, but no luck. Even connecting the old hard drive to the new Mac (via USB) doesn't make iTunes all of a sudden "see" the old library. That data doesn't seem to be there. It didn't transfer over. Did it not transfer over because the songs weren't on the internal volume? Should I have left my external hard drive on?
So.... now that I've spent almost 3 days total trying to get this to work, and everything is running... I don't want to have to start over in order to get iTunes to work. Is there a way I can just drag over some XML files or something from the old computer? I don't want to lose all of the ratings and personal notes and everything.
I should add also that I have like only four songs I've ever actually bought through iTunes. I'm still a bit old fashioned and buy CDs and rip them to Apple Lossless. So I hope it's not an authorization / reauthorization issue because I have like 1400 albums ripped.
Thanks in advance for any help.
--Jeff

iTunes does not use the .xml it uses the .itl
If you are sure your old library file migrated across (does the file size and modification dates suggest it has?) start iTunes while holding down the option/alt key and guide it to the .itl file to get it to use that one.

TM doesn't see its backup after migrating to new iMac and restoring system.

TM doesn't see its backup even though it still exists on the HD. I just migrated to a new iMac. After using OS X disc to 'Restore System From Backup' with TM backup it was showing the latest backup attempt had failed. The same disk was highlighted under TM Preferences too. But once I reset it TM began to make a new backup under a new folder/computer name (adding a number to the end). Is there a way to make TM see the existing BU and continue on?
Message was edited by: Sakahara

I'll try to recall to the best of my memory what I did... It's been stressful, frustrating, trying to deal with it.
Computers:
1) iMac6,1 (Late 2006) Intel 2.16 GHz Nvidia OS X 10.5.6
2) iMac8,1 (Early 2008) Intel 2.8 GHz ATI OS X 10.5.4
Perform final backup of iMac #1 with TM and SuperDuper!
Shut down and disconnect.
Hook up iMac #2 and power up.
After OS X intro select 'Transfer from another Mac' with Set Up Assistant (note: this was from the SD! backup).
Everything was selected for transfer; Users, Apps, Network,..etc. (I assumed it would update OS X too).
Transfer complete.
Restart.
Log in.*
* I have both Admin and User account. I noticed things weren't performance was off; log in was slow (Menu Bar items took longer to display, clock too), and generally overall apps,..etc seemed slow. Apps were asking for license and reg info too.
Second attempt (restore system from TM backup):
Startup from OS X 10.5.6 disc.
Erase HD with DU.
Select 'Restore System from Backup'.
Select TM backup.
After that completed, restart computer.
And that brings us to now. Well, sort of.
So what is the proper way to migrate as it were from between two different Intel iMac's? I have to assume I transfered over system files that caused a conflict with the new iMac's HW, correct? What can I do now? I've already performed new backups of both SD! and TM. I didn't think it mattered since either way the backups come from my old system. I'm guessing I should have updated OS X first on the new iMac and only selected User files, Apps, Network settings,.. etc., for transfer, or maybe installed apps fresh. I thought I was doing it correctly.
The new iMac still seems off with performance to me. I've tried performing multiple 'Repair Disk Permissions' too. There are about 32 differing permissions but DU doesn't seem able to repair them as they come up again and again. Here are some examples;
2009-05-15 09:23:47 -0700: Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-05-15 09:23:47 -0700: Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/DVD.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-05-15 09:23:47 -0700: Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSettings.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-05-15 09:23:47 -0700: Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSources.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-05-15 09:23:47 -0700: Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Movies.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-05-15 09:23:52 -0700: Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/CodeResourc es", should be -rw-r--r-- , they are lrw-r--r-- .
2009-05-15 09:23:52 -0700: Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/BlackAndWhiteEffect.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-05-15 09:23:52 -0700: Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/CubeTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-05-15 09:23:52 -0700: Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/DissolveTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-05-15 09:23:52 -0700: Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/DropletTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-05-15 09:23:52 -0700: Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/FadeThroughBlackTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
My final attempt to straighten this out is to install from OS X disc fresh (erase/install). Transfer only User files, Network settings, anything pertinent to my Users (email, browser, keychain,..),... and nothing else. Reinstall 3rd-Party Apps. I had to do this before after updating from Tiger to Leopard because it didn't take well.
Any help/insight appreciated.

My new iphone 5 is frozen, with the cord to computer symbol on the screen after failing to finish updating to ios 7. iTunes no longer sees the phone. I've tried rebooting the computer, rebooting the iPhone, but iTunes still doesn't see the iPhone.

my new iphone 5 is frozen, with the cord to computer symbol on the screen after failing to finish updating to ios 7. iTunes no longer sees the phone. I've tried rebooting the computer, rebooting the iPhone, but iTunes still doesn't see the iPhone.

If your computer doesn't see the phone when you plug it in, you may have to take it to an Apple Store.

My computer doesn't see my external hard drive

Hello. I have a Power Mac G4, X10.4.6 and for a long time I've used it successfully with my hard drice - and Icecube 800 hard drive connected through a firewire cable. Now i just formated the intern hard disks and now the computer doesn't see the hard drive. The Icecube 800 doesn't require installation of any drivers and it still works perfectly on other computers. And there's nothing wrong with the ports because I can still connect my iPod. What do i do? Thank you, Sebastian.

It does. It may not call it "resetting the port", but this method is what resets the port:
"Tip: FireWire ports are keyed, which means the FireWire cable can only be inserted one way. Check that you are inserting the FireWire cable into the FireWire port in the correct orientation.
If the issue persists, try these steps:
1. Shut down the computer.
2. Disconnect all FireWire devices and all other cables, except the keyboard and mouse cable(s).
3. Disconnect the computer from the power outlet and wait for 3 to 5 minutes.
4. Plug the computer back in and turn it on.
5. Reconnect the FireWire device(s) (one at a time if there is more than one) and test. Test with each FireWire port if you have more than one."
If it isn't resetting the port properly, I think your port, cable, or controller is damaged.

It appears since my Windows PC McAfee AV subscription expired my PC's iTunes doesn't see my two Apple TV2's. My computer has internet connection thru router and my ATV has internet connection thru same router. My iPad can see the ATV but it can't see iT

My Windows PC iTunes doesn't see my two Apple TV2's (in the speaker button in lower right of iTunes), I believe this problem began when my PC's McAfee AV subscription expired. My computer has internet connection thru router and my ATVs have internet connection thru same router so it's not a networking issue. My iPad can see the ATVs but it can't see iTunes so the problem appears to be PC/iTunes related. I turned the PC's firewall off but no joy. I uninstalled the expired McAfee and still no joy. Reboot = no joy. Glass of scotch = no joy. Need help!!

Wanted to add that I turned on Home Sharing w/the same account in iTunes and ATVs. And I've successfully streamed music/photos to my ATVs for over a year.

ITunes doesn't see my iPhone but my computer does.

iTunes doesn't see my iPhone when I plug it in my computer but, my Computer does. What do I do?

Mac: http://support.apple.com/kb/TS1591
Windows: http://support.apple.com/kb/TS1538
Your computer should recognize the Camera Roll only, as a digital camera. iTunes must recognize it for syncing and backup.

New iMac doesn't see old iMac data on Time Capsule

I have a brand new iMac - my Time Capsule doesn't see my backup, it sees my Mac Book Pro backup but not old iMac (which is broklen, hence new one from Apple). I can see old iMac data is there through browser but not seen by Migrate assistant. Any ideas?

Look at manual resstore methods.. I would be careful migrating to a later OS.
Q14-17 in pondini.
17 in particular.
http://pondini.org/TM/FAQ.html

If I connect my iphone to my pc the computer see's it as a camera and itunes doesn't see it at all

If I connect my iphone 3gs to my pc the computer see's it as a camera but itunes doesn't see it at all, however, if I connect a friends using the same usb port and lead it connected straight away. I've reset the phone uninstalled itunes abd re installed and I've updated the software but nothing seems to work. Any ideas?

If you have photos in the Camera Roll on your iPhone and have preferences set to open an image azure application on your pc when a camera is connected, your pc will do just that. That's how one transfers photos taken with the phone to a PC.
You can do two things to avoid this.
1. Just quit the image capture application and open iTunes. You do have iTunes 10.7 or higher installed on your pc, right?
2. You can change the preferences on your pc to do nothing when a camera is connected. And you can set the preference in iTunes to open iTunes when your iPhone is connected.

Imac host doesn't see target computer

Similar Messages

Maybe you are looking for