IMac i7 27 inch System troubles
In the past week my six month old iMac i7 computer that has been a dream has gone nuts. It started when using a stock market charting program that I have used for months. The computer refused to display the charts correctly.
The strange thing was if I came up under a different user account, the problem disappeared. I'm an old hand and Macs (25 years) and I have tried everything to correct the problem.
Finally resolved that I would have to reload the System OS or wipe and restore from Time Machine.
The problem is I can't get the computer to start up on any other drive, a purchased copy of Snow Leopard or even the install DVD that came with the machine. They just hang at the very start where the apple logo is displayed and never get any further.
This one has me stumped and would appreciate some suggestions.
Thank for the reply. But, as I mentioned, all attempts to restart from any drive or DVD disk ends the same, a freeze at the apple initial apple logo.
The DVD spins for a couple of seconds then stops.
I'm now wondering if I have a hardware failure problem. Guess it means a trip to Apple with the machine.
Similar Messages
-
After install of Mavericks, it looks like my system kernal panics and just sits there. I tried waiting over two nights. Tried reinstalling twice, booting ro the repair partition and repairs permissions/drive/verify , with no problems. Tried reseting PVRAM(or whateverit called). Recovery partition now has Mavericks as OS. Im running a iMac i3 27 inch circa 2011. Any ideas? Can still bootcamp into windows.
Thank youbhadotia wrote:Anyway's the file downloaded from dell to update the partition for Studio 1555 is corrupted (checksums don't match). My partition still doesn't boot. I'm working to fix this and will update my post when I'm done.
The file seems to create the CD/DVD/Image and USB just fine. So I used this only to create a CD image which I then wrote on a blank CD which seems to work fine. Also, I played around a bit and had some partial success in booting the partition. I've updated my original opening post with the new findings.
Whew!! what a waste of time! Never want to do all of this again .
Last edited by bhadotia (2012-03-03 00:05:22) -
When I purchased my new iMAC 21.5-inch, Mid 2011 I didn't recieve any program/system CD's. If I want to reload a app how would I do it? On my other Mac's I always had system disc's etc.
Thank youI think Apple has reacted to a perceived---or actual---"dumbing down" of the user base. When new Macs shipped with disks, all too many people either blindly threw the disks away of lost them. There are posts all over these forums from people who no longer have their install/restore disks. Some can no longer get proper replacement disks becsue their computer is too old and Apple no longer has a stock of that model's disk.
This is not unique to Apple. PC makers are doing the same thing--providing a restore function internally. -
IMac 21.5-inch, Late 2013 freezes and crashes
I purchased this computer April 2014 and within 2 months it started freezing and then crashing. This happens randomly and has occurred approximately 12 - 15 time; Apple Care has been consulted five times - once which involved taking the computer back to Apple for their diagnostics. Each time, a tech from AppleCare has accessed the computer remotely, run the check disk utility and on two occasions, the hard drive has been reset. Despite these efforts, this issue continues to happen, the latest being Oct 10th in the a.m. I managed to find the logs myself and I would appreciate any input from someone who knows how to read them, as I do not.
Thanks in advance for your assistance,
Barb
Software OS X 10.9.5 (13F34)
Apple System Log (ASL) Messages:
Source: /var/log/asl
Size: 132 KB (132,113 bytes)
Last Modified: 2014-10-11, 2:33 PM
Recent Contents: ...
Apple System
Apple System L
2014-10-10 10:57:15 -0600 com.apple.WebKit.Plugin.64[1150]: CoreText performance note: Client called CTFontCreateWithName() using name "Arial Bold" and got font with PostScript name "Arial-BoldMT". For best performance, only use PostScript names when calling this API.
2014-10-10 10:57:15 -0600 com.apple.WebKit.Plugin.64[1150]: CoreText performance note: Client called CTFontCreateWithName() using name "Arial" and got font with PostScript name "ArialMT". For best performance, only use PostScript names when calling this API.
2014-10-10 11:02:47 -0600 xpcproxy[1156]: assertion failed: 13F34: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
2014-10-10 11:02:47 -0600 syncdefaultsd[1155]: *** -[IADomainCache init]: IA domains cache couldn't be read.
2014-10-10 11:02:47 -0600 syncdefaultsd[1155]: -[IAPluginManager allAListPlugins] [546] -- *** warning: we're on the slow path.
2014-10-10 11:02:47 -0600 com.apple.launchd[1]: Exited with code: 1
2014-10-10 11:02:47 -0600 com.apple.launchd[1]: Exited with code: 1
2014-10-10 11:08:58 -0600 AddressBookSourceSync[1159]: *** -[IADomainCache init]: IA domains cache couldn't be read.
2014-10-10 11:08:58 -0600 AddressBookSourceSync[1159]: -[IAPluginManager allAListPlugins] [546] -- *** warning: we're on the slow path.
2014-10-10 11:12:47 -0600 periodic-wrapper[394]: Running daily periodic task.
2014-10-10 11:12:47 -0600 WindowServer[87]: device_generate_desktop_screenshot: authw 0x0(0), shield 0x7fe37bf5cf80(2001)
2014-10-10 11:12:47 -0600 WindowServer[87]: device_generate_lock_screen_screenshot: authw 0x0(0), shield 0x7fe37bf5cf80(2001)
2014-10-10 11:12:48 -0600 parentalcontrolsd[1197]: StartObservingFSEvents [849:] -- *** StartObservingFSEvents started event stream
2014-10-10 11:12:48 -0600 nbagent[1162]: XPC Activity invoked with state=0
2014-10-10 11:12:48 -0600 nbagent[1162]: XPC Activity invoked with state=2
2014-10-10 11:12:49 -0600 sandboxd[619]: nbstated(1232) deny ipc-posix-shm-read-data com.apple.AppleDatabaseChanged
2014-10-10 11:12:58 -0600 AddressBookSourceSync[1161]: *** -[IADomainCache init]: IA domains cache couldn't be read.
2014-10-10 11:12:58 -0600 AddressBookSourceSync[1161]: -[IAPluginManager allAListPlugins] [546] -- *** warning: we're on the slow path.
2014-10-10 11:13:06 -0600 kernel[0]: ARPT: 16313.804733: AirPort_Brcm43xx::powerChange: System Sleep
2014-10-10 11:13:06 -0600 kernel[0]: ARPT: 16313.804737: wl0: powerChange: *** BONJOUR/MDNS OFFLOADS ARE NOT RUNNING.
2014-10-10 11:13:07 -0600 kernel[0]: ARPT: 16314.403733: scanparams:
2014-10-10 11:13:07 -0600 kernel[0]: ARPT: 16314.403735: flags 0
2014-10-10 11:13:07 -0600 kernel[0]: ARPT: 16314.403736: active_time 0, passive_time 0
2014-10-10 11:13:07 -0600 kernel[0]: ARPT: 16314.403737: scan_start_delay 0
2014-10-10 11:13:07 -0600 kernel[0]: ARPT: 16314.403738: scan_cycle_idle_rest_time 0, scan_cycle_idle_rest_time_multiplier 0
2014-10-10 11:13:07 -0600 kernel[0]: ARPT: 16314.403740: max_scan_cycles 0, max_rest_time 0
2014-10-10 11:13:07 -0600 kernel[0]: ARPT: 16314.403741: Scan Channels (0): None
2014-10-10 11:13:07 -0600 kernel[0]: ARPT: 16314.403742: SSID (0): None
2014-10-10 11:13:07 -0600 kernel[0]: ARPT: 16314.403743: SSID count = 0
2014-10-10 11:13:07 -0600 kernel[0]: ARPT: 16314.403744: wl0: leaveModulePoweredForOffloads: Wi-Fi will stay on.
2014-10-10 11:13:07 -0600 kernel[0]: AppleThunderboltNHI::prePCIWake - power up complete - took 0 us
2014-10-10 11:13:07 -0600 kernel[0]: AppleThunderboltHAL::earlyWake - complete - took 0 milliseconds
2014-10-10 11:13:07 -0600 kernel[0]: Bluetooth -- LE is supported - Disable LE meta event
2014-10-10 11:13:07 -0600 kernel[0]: Thunderbolt Self-Reset Count = 0xedefbe00
2014-10-10 11:13:07 -0600 kernel[0]: IOThunderboltSwitch<0xffffff8019bc0200>(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0
2014-10-10 11:13:07 -0600 kernel[0]: IOThunderboltSwitch<0xffffff8019bc0200>(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 12 unplug = 0
2014-10-10 11:13:07 -0600 kernel[0]: **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Suspend -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0xc800 ****
2014-10-10 11:13:09 -0600 kernel[0]: AppleThunderboltNHIType2::waitForOk2Go2Sx - retries = 60000
2014-10-10 13:49:51 -0600 kernel[0]: Wake reason: XHC1
2014-10-10 13:49:51 -0600 kernel[0]: Previous Sleep Cause: 5
2014-10-10 13:49:51 -0600 kernel[0]: The USB device BRCM20702 Hub (Port 8 of Hub at 0x14000000) may have caused a wake by issuing a remote wakeup (2)
2014-10-10 13:49:51 -0600 kernel[0]: AppleThunderboltNHI::prePCIWake - power up complete - took 0 us
2014-10-10 13:49:51 -0600 kernel[0]: AppleThunderboltHAL::earlyWake - complete - took 1 milliseconds
2014-10-10 13:49:51 -0600 kernel[0]: The USB device Bluetooth USB Host Controller (Port 3 of Hub at 0x14800000) may have caused a wake by issuing a remote wakeup (3)
2014-10-10 13:49:51 -0600 kernel[0]: Thunderbolt Self-Reset Count = 0xedefbe00
2014-10-10 13:49:51 -0600 kernel[0]: IOThunderboltSwitch<0xffffff8019bc0200>(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0
2014-10-10 13:49:51 -0600 kernel[0]: IOThunderboltSwitch<0xffffff8019bc0200>(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 12 unplug = 0
2014-10-10 13:49:51 -0600 kernel[0]: TBT W (2): 0x0100 [x]
2014-10-10 13:49:51 -0600 kernel[0]: **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Resume -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0xc800 ****
2014-10-10 13:49:51 -0600 kernel[0]: full wake (reason 1) 143 ms
2014-10-10 13:49:51 -0600 kernel[0]: **** [IOBluetoothHCIController][ProcessEventDataWL] -- calling mDisplayManager->activityTickle() to wake up the display
2014-10-10 13:49:51 -0600 kernel[0]: ARPT: 16317.034839: si_survive_perst_war: bar0win before 18003000, bar0win after 18001000
2014-10-10 13:49:51 -0600 kernel[0]: ARPT: 16317.038292: pcicore_pci_pmeclr PMECSR : 0x4008
2014-10-10 13:49:51 -0600 kernel[0]: ARPT: 16317.038300: pcicore_pmestatclr PMECSR : 0x4008
2014-10-10 13:49:51 -0600 kernel[0]: ARPT: 16317.038530: pcicore_pci_pmeclr PMECSR : 0x4008
2014-10-10 13:49:51 -0600 kernel[0]: en1: BSSID changed to a8:39:44:41:18:38
2014-10-10 13:49:51 -0600 WindowServer[87]: CGXDisplayDidWakeNotification [16317265003563]: posting kCGSDisplayDidWake
2014-10-10 13:49:51 -0600 WindowServer[87]: handle_will_sleep_auth_and_shield_windows: NULL shield_window (lock state: 1)
2014-10-10 13:49:52 -0600 hidd[43]: MultitouchHID: device bootloaded
2014-10-10 13:49:54 -0600 kernel[0]: ARPT: 16319.817617: AirPort_Brcm43xx::powerChange: System Wake - Full Wake/ Dark Wake / Maintenance wake
2014-10-10 13:49:54 -0600 kernel[0]: en1: BSSID changed to a8:39:44:41:18:38
2014-10-10 13:49:54 -0600 airportd[62]: _doAutoJoin: Already associated to “Tiger1”. Bailing on auto-join.
2014-10-10 13:49:54 -0600 apsd[213]: Unrecognized leaf certificate
2014-10-10 13:49:55 -0600 ntpd[111]: ntpd: wake time set +0.254761 s
2014-10-10 13:49:55 -0600 com.apple.time[154]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
2014-10-10 13:49:55 -0600 com.apple.time[154]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
2014-10-10 13:49:56 -0600 com.apple.SecurityServer[25]: Killing auth hosts
2014-10-10 13:49:56 -0600 com.apple.SecurityServer[25]: Session 100021 destroyed
2014-10-10 13:49:56 -0600 com.apple.SecurityServer[25]: Session 100022 created
2014-10-10 13:49:57 -0600 com.apple.WebKit.WebContent[1241]: CKSoftwareMap: Registering with Daemon
2014-10-10 13:50:04 -0600 com.apple.WebKit.WebContent[1262]: CKSoftwareMap: Registering with Daemon
2014-10-10 13:50:04 -0600 com.apple.WebKit.WebContent[1263]: CKSoftwareMap: Registering with Daemon
2014-10-10 13:50:06 -0600 com.apple.WebKit.WebContent[1260]: CKSoftwareMap: Registering with Daemon
2014-10-10 13:50:10 -0600 com.apple.WebKit.WebContent[1262]: ERROR: ITSExceptionHandler: {message:"TypeError: 'null' is not an object (evaluating 'document.querySelector("#header").addClassName')", url:"https://se.itunes.apple.com/htmlResources/936F/da-storefront-autoinstallations.j s", lineNumber:"358"}
2014-10-10 13:50:18 -0600 com.apple.WebKit.WebContent[1262]: ERROR: ITSExceptionHandler: {message:"TypeError: 'null' is not an object (evaluating 'document.querySelector("#header").removeClassName')", url:"https://se.itunes.apple.com/htmlResources/936F/da-storefront-autoinstallations.j s", lineNumber:"358"}
2014-10-10 13:50:24 -0600 com.apple.backupd[1276]: Starting automatic backup
2014-10-10 13:50:24 -0600 com.apple.backupd[1276]: Attempting to mount network destination URL: afp://Barb%20Foster;AUTH=SRP@Jim's%20AirPort%20Time%20Capsule._afpovertcp._tcp. local/Data
2014-10-10 13:50:24 -0600 NetAuthSysAgent[1277]: TUAMHandler::SetUAMType setting UAMType to 13
2014-10-10 13:50:25 -0600 syncdefaultsd[1283]: *** -[IADomainCache init]: IA domains cache couldn't be read.
2014-10-10 13:50:25 -0600 syncdefaultsd[1283]: -[IAPluginManager allAListPlugins] [546] -- *** warning: we're on the slow path.
2014-10-10 13:50:35 -0600 com.apple.backupd[1276]: Mounted network destination at mount point: /Volumes/Data using URL: afp://Barb%20Foster;AUTH=SRP@Jim's%20AirPort%20Time%20Capsule._afpovertcp._tcp. local/Data
2014-10-10 13:50:35 -0600 mds[34]: (Normal) Volume: volume:0x7f835a869800 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/Data
2014-10-10 13:50:36 -0600 kernel[0]: pci pause: SDXC
2014-10-10 13:50:48 -0600 com.apple.preference.datetime.remoteservice[1293]: assertion failed: 13F34: liblaunch.dylib + 25164 [A40A0C7B-3216-39B4-8AE0-B5D3BAF1DA8A]: 0x25
2014-10-10 13:50:48 -0600 com.apple.preference.datetime.remoteservice[1293]: assertion failed: 13F34: liblaunch.dylib + 25164 [A40A0C7B-3216-39B4-8AE0-B5D3BAF1DA8A]: 0x25
2014-10-10 13:50:48 -0600 com.apple.preference.datetime.remoteservice[1293]: assertion failed: 13F34: liblaunch.dylib + 25164 [A40A0C7B-3216-39B4-8AE0-B5D3BAF1DA8A]: 0x25
2014-10-10 13:50:48 -0600 com.apple.preference.datetime.remoteservice[1293]: ### Attempt to call communicate with writeconfig before it's unlocked!
2014-10-10 13:50:48 -0600 com.apple.preference.datetime.remoteservice[1293]: Bogus event received by listener connection:
<error: 0x107aa2b50> { count = 1, contents =
"XPCErrorDescription" => <string: 0x107aa2e60> { length = 18, contents = "Connection invalid" }
2014-10-10 13:50:48 -0600 ntpd[1296]: proto: precision = 1.000 usec
2014-10-10 13:50:48 -0600 com.apple.time[154]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
2014-10-10 13:50:48 -0600 com.apple.time[154]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
2014-10-10 13:50:57 -0600 ntpd[1303]: proto: precision = 1.000 usec
2014-10-10 13:50:57 -0600 com.apple.time[154]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
2014-10-10 13:50:57 -0600 com.apple.time[154]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
2014-10-10 13:51:03 -0600 com.apple.prefs.backup.remoteservice[1313]: assertion failed: 13F34: liblaunch.dylib + 25164 [A40A0C7B-3216-39B4-8AE0-B5D3BAF1DA8A]: 0x25
2014-10-10 13:51:03 -0600 com.apple.prefs.backup.remoteservice[1313]: assertion failed: 13F34: liblaunch.dylib + 25164 [A40A0C7B-3216-39B4-8AE0-B5D3BAF1DA8A]: 0x25
2014-10-10 13:51:03 -0600 com.apple.prefs.backup.remoteservice[1313]: Bogus event received by listener connection:
<error: 0x105726b50> { count = 1, contents =
"XPCErrorDescription" => <string: 0x105726e60> { length = 18, contents = "Connection invalid" }
2014-10-10 13:51:43 -0600 kernel[0]: hfs: mounted Time Machine Backups on device disk2s2
2014-10-10 13:51:44 -0600 com.apple.backupd[1276]: Disk image /Volumes/Data/Barb’s iMac.sparsebundle mounted at: /Volumes/Time Machine Backups
2014-10-10 13:51:45 -0600 com.apple.backupd[1276]: Backing up to /dev/disk2s2: /Volumes/Time Machine Backups/Backups.backupdb
2014-10-10 13:51:45 -0600 mds[34]: (Error) Volume: Root store set to FSOnly with matching create! (loaded:1)
2014-10-10 13:52:02 -0600 com.apple.backupd[1276]: Will copy (2 MB) from Macintosh HD
2014-10-10 13:52:02 -0600 com.apple.backupd[1276]: Found 77 files (3.2 MB) needing backup
2014-10-10 13:52:02 -0600 com.apple.backupd[1276]: 1.14 GB required (including padding), 1.86 TB available
2014-10-10 13:52:59 -0600 com.apple.backupd[1276]: Copied 297 items (3.6 MB) from volume Macintosh HD. Linked 1304.
2014-10-10 13:53:39 -0600 com.apple.backupd[1276]: Will copy (896 bytes) from Macintosh HD
2014-10-10 13:53:39 -0600 com.apple.backupd[1276]: Found 12 files (896 bytes) needing backup
2014-10-10 13:53:39 -0600 com.apple.backupd[1276]: 1.13 GB required (including padding), 1.86 TB available
2014-10-10 13:53:40 -0600 com.apple.backupd[1276]: Copied 15 items (929 bytes) from volume Macintosh HD. Linked 124.
2014-10-10 13:53:49 -0600 com.apple.backupd[1276]: Created new backup: 2014-10-10-135348
2014-10-10 13:53:50 -0600 com.apple.backupd[1276]: Starting post-backup thinning
2014-10-10 13:53:50 -0600 com.apple.backupd[1276]: No post-backup thinning needed: no expired backups exist
2014-10-10 13:53:50 -0600 com.apple.backupd[1276]: Backup completed successfully.
2014-10-10 13:53:52 -0600 kernel[0]: hfs: unmount initiated on Time Machine Backups on device disk2s2
2014-10-10 13:53:53 -0600 com.apple.backupd[1276]: Ejected Time Machine disk image: /Volumes/Data/Barb’s iMac.sparsebundle
2014-10-10 13:53:53 -0600 kernel[0]: AFP_VFS afpfs_unmount: /Volumes/Data, flags 0, pid 1382
2014-10-10 13:53:53 -0600 kernel[0]: ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0xffffff801ec25410
2014-10-10 13:53:53 -0600 kernel[0]: ASP_TCP Detach: Reply queue not empty?
2014-10-10 13:53:53 -0600 com.apple.backupd[1276]: Ejected Time Machine network volume.
2014-10-10 13:53:59 -0600 com.apple.prefs.backup.remoteservice[1313]: Could not connect the action warnCullingPressed: to target of class TMOptionsSheetController
2014-10-10 13:53:59 -0600 com.apple.prefs.backup.remoteservice[1313]: Could not connect the action backUpOnBatteryPowerPressed: to target of class TMOptionsSheetController
2014-10-10 13:54:00 -0600 WindowServer[87]: window 13a is already attached to window 138
2014-10-10 13:54:07 -0600 WindowServer[87]: _CGXGetWindowOrderingGroup: Operation on a window 0x13a requiring rights 0x5 by caller System Preferences
2014-10-10 13:55:57 -0600 com.apple.launchd[1]: Could not terminate job: 3: No such process
2014-10-10 13:55:57 -0600 com.apple.launchd[1]: Using fallback option to terminate job...
2014-10-10 13:55:57 -0600 com.apple.launchd[1]: Exited with code: 1
2014-10-10 13:55:57 -0600 com.apple.launchd.peruser.501[151]: Exited: Killed: 9
2014-10-10 13:55:57 -0600 WindowServer[87]: CGXGetConnectionProperty: Invalid connection 53771
2014-10-10 13:55:57 -0600 WindowServer[87]: CGXGetConnectionProperty: Invalid connection 53771
2014-10-10 13:55:57 -0600 WindowServer[87]: CGXGetConnectionProperty: Invalid connection 53771
2014-10-10 13:55:57 -0600 WindowServer[87]: CGXGetConnectionProperty: Invalid connection 53771
2014-10-10 13:55:57 -0600 WindowServer[87]: CGXGetConnectionProperty: Invalid connection 53771
2014-10-10 13:55:57 -0600 com.apple.launchd[1]: Exited: Killed: 9
2014-10-10 13:55:57 -0600 com.apple.launchd.peruser.501[151]: Exited: Killed: 9
2014-10-10 13:55:57 -0600 com.apple.launchd.peruser.501[151]: Exited: Killed: 9
2014-10-10 13:55:57 -0600 com.apple.launchd[1]: Exited: Killed: 9
2014-10-10 13:55:57 -0600 com.apple.launchd[1]: Exited: Killed: 9
2014-10-10 13:55:57 -0600 com.apple.launchd.peruser.501[151]: Exited: Killed: 9
2014-10-10 13:55:57 -0600 com.apple.launchd.peruser.501[151]: Exited: Killed: 9
2014-10-10 13:55:57 -0600 com.apple.launchd[1]: Exited: Killed: 9
2014-10-10 13:55:57 -0600 com.apple.launchd.peruser.501[151]: Exited: Killed: 9
2014-10-10 13:55:57 -0600 com.apple.launchd.peruser.501[151]: Exited: Killed: 9
2014-10-10 13:55:57 -0600 com.apple.launchd.peruser.501[151]: Exited: Killed: 9
2014-10-10 13:56:07 -0600 loginwindow[38]: ERROR | -[ApplicationManager quitPrivateProcesses] | Private process did not quit
2014-10-10 13:56:07 -0600 sessionlogoutd[1394]: sessionlogoutd Launched
2014-10-10 13:56:07 -0600 sessionlogoutd[1394]: DEAD_PROCESS: 38 console
2014-10-10 13:56:07 -0600 loginwindow[38]: ERROR | SLODErrorHandler | Connection to sessionlogoutd lost, exiting loginwindow
2014-10-10 13:56:07 -0600 WindowServer[87]: CGXRestartSessionWorkspace: session workspace exited for session 256 (on console)
2014-10-10 13:56:07 -0600 WindowServer[87]: Session 256 released (1 references)
2014-10-10 13:56:07 -0600 WindowServer[87]: Session 256 released (0 references)
2014-10-10 13:56:07 -0600 WindowServer[87]: loginwindow connection closed; closing server.
2014-10-10 13:56:07 -0600 UserEventAgent[11]: Captive: [UserAgentDied:142] User Agent @port=77315 Died
2014-10-10 13:56:07 -0600 librariand[184]: server connection is invalid: Connection invalid
2014-10-10 13:56:07 -0600 imagent[192]: Quit - notifying about shutdown
2014-10-10 13:56:07 -0600 imagent[192]: Quit - shutting down daemon
2014-10-10 13:56:07 -0600 identityservicesd[202]: Quit - notifying about shutdown
2014-10-10 13:56:07 -0600 identityservicesd[202]: Quit - shutting down daemon
2014-10-10 13:56:07 -0600 com.apple.launchd[1]: Exited with code: 3
2014-10-10 13:56:07 -0600 com.apple.InputMethodKit.UserDictionary[265]: shared connection error: Connection interrupted
2014-10-10 13:56:07 -0600 com.apple.InputMethodKit.UserDictionary[265]: shared connection error: Connection invalid
2014-10-10 13:56:07 -0600 com.apple.InputMethodKit.UserDictionary[265]: ping returned unexpected reply: <error: 0x113226b50> { count = 1, contents =
"XPCErrorDescription" => <string: 0x113226e60> { length = 18, contents = "Connection invalid" }
2014-10-10 13:56:07 -0600 airportd[62]: _doAutoJoin: Already associated to “Tiger1”. Bailing on auto-join.
2014-10-10 13:56:07 -0600 loginwindow[1396]: Login Window Application Started
2014-10-10 13:56:07 -0600 WindowServer[1397]: Server is starting up
2014-10-10 13:56:07 -0600 WindowServer[1397]: Session 256 retained (2 references)
2014-10-10 13:56:07 -0600 WindowServer[1397]: Session 256 released (1 references)
2014-10-10 13:56:07 -0600 WindowServer[1397]: Session 256 retained (2 references)
2014-10-10 13:56:07 -0600 WindowServer[1397]: init_page_flip: page flip mode is on
2014-10-10 13:56:07 -0600 WindowServer[1397]: Found 1 modes for display 0x00000000 [1, 0]
2014-10-10 13:56:07 -0600 WindowServer[1397]: Found 1 modes for display 0x00000000 [1, 0]
2014-10-10 13:56:07 -0600 WindowServer[1397]: Found 15 modes for display 0x00000000 [15, 0]
2014-10-10 13:56:07 -0600 kernel[0]: IOHIDSystem::registerScreenGated: Screen 0 recycled from pid 87
2014-10-10 13:56:07 -0600 WindowServer[1397]: mux_initialize: Couldn't find any matches
2014-10-10 13:56:07 -0600 WindowServer[1397]: Found 15 modes for display 0x00000000 [15, 0]
2014-10-10 13:56:07 -0600 WindowServer[1397]: Found 1 modes for display 0x00000000 [1, 0]
2014-10-10 13:56:07 -0600 WindowServer[1397]: Found 1 modes for display 0x00000000 [1, 0]
2014-10-10 13:56:07 -0600 WindowServer[1397]: WSMachineUsesNewStyleMirroring: true
2014-10-10 13:56:07 -0600 WindowServer[1397]: Display 0x04280482: GL mask 0x4; bounds (0, 0)[1920 x 1080], 15 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a012, S/N 0, Unit 2, Rotation 0
UUID 0x2838c3dda39478c14a5e57649bbc5643
2014-10-10 13:56:07 -0600 WindowServer[1397]: Display 0x003f003f: GL mask 0x8; bounds (0, 0)[4096 x 2160], 2 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
2014-10-10 13:56:07 -0600 WindowServer[1397]: Display 0x003f003c: GL mask 0x1; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 0, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
2014-10-10 13:56:07 -0600 WindowServer[1397]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
2014-10-10 13:56:07 -0600 WindowServer[1397]: WSSetWindowTransform: Singular matrix
2014-10-10 13:56:07 -0600 WindowServer[1397]: WSSetWindowTransform: Singular matrix
2014-10-10 13:56:07 -0600 WindowServer[1397]: Display 0x04280482: GL mask 0x4; bounds (0, 0)[1920 x 1080], 15 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a012, S/N 0, Unit 2, Rotation 0
UUID 0x2838c3dda39478c14a5e57649bbc5643
2014-10-10 13:56:07 -0600 WindowServer[1397]: Display 0x003f003f: GL mask 0x8; bounds (2944, 0)[1 x 1], 2 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
2014-10-10 13:56:07 -0600 WindowServer[1397]: Display 0x003f003c: GL mask 0x1; bounds (2945, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 0, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
2014-10-10 13:56:07 -0600 WindowServer[1397]: Display 0x003f003d: GL mask 0x2; bounds (2946, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
2014-10-10 13:56:07 -0600 WindowServer[1397]: CGXPerformInitialDisplayConfiguration
2014-10-10 13:56:07 -0600 WindowServer[1397]: Display 0x04280482: Unit 2; Vendor 0x610 Model 0xa012 S/N 0 Dimensions 18.70 x 10.51; online enabled built-in, Bounds (0,0)[1920 x 1080], Rotation 0, Resolution 1
2014-10-10 13:56:07 -0600 WindowServer[1397]: Display 0x003f003f: Unit 3; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2944,0)[1 x 1], Rotation 0, Resolution 1
2014-10-10 13:56:07 -0600 WindowServer[1397]: Display 0x003f003c: Unit 0; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2945,0)[1 x 1], Rotation 0, Resolution 1
2014-10-10 13:56:07 -0600 WindowServer[1397]: Display 0x003f003d: Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2946,0)[1 x 1], Rotation 0, Resolution 1
2014-10-10 13:56:07 -0600 WindowServer[1397]: GLCompositor: GL renderer id 0x01024502, GL mask 0x0000000f, accelerator 0x000041cf, unit 0, caps QEX|MIPMAP, vram 1536 MB
2014-10-10 13:56:07 -0600 WindowServer[1397]: GLCompositor: GL renderer id 0x01024502, GL mask 0x0000000f, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
2014-10-10 13:56:07 -0600 WindowServer[1397]: GLCompositor enabled for tile size [256 x 256]
2014-10-10 13:56:07 -0600 WindowServer[1397]: CGXGLInitMipMap: mip map mode is on
2014-10-10 13:56:07 -0600 loginwindow[1396]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
2014-10-10 13:56:07 -0600 WindowServer[1397]: Display 0x04280482: Unit 2; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
2014-10-10 13:56:08 -0600 launchctl[1399]: com.apple.findmymacmessenger: Already loaded
2014-10-10 13:56:08 -0600 loginwindow[1396]: Setting the initial value of the magsave brightness level 1
2014-10-10 13:56:08 -0600 airportd[62]: _doAutoJoin: Already associated to “Tiger1”. Bailing on auto-join.
2014-10-10 13:56:08 -0600 com.apple.SecurityServer[25]: Session 100024 created
2014-10-10 13:56:08 -0600 loginwindow[1396]: Login Window Started Security Agent
2014-10-10 13:56:08 -0600 UserEventAgent[1400]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
2014-10-10 13:56:08 -0600 SecurityAgent[1406]: MacBuddy was run = 0
2014-10-10 13:56:08 -0600 WindowServer[1397]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x04280482 device: 0x7ff172c1dfa0 isBackBuffered: 1 numComp: 3 numDisp: 3
2014-10-10 13:56:08 -0600 WindowServer[1397]: _CGXGLDisplayContextForDisplayDevice: acquired display context (0x7ff172c1dfa0) - enabling OpenGL
2014-10-10 13:56:09 -0600 WindowServer[1397]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
2014-10-10 13:56:09 -0600 WindowServer[1397]: Display 0x04280482: Unit 2; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
2014-10-10 13:56:09 -0600 WindowServer[1397]: Display 0x04280482: Unit 2; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
2014-10-10 13:56:15 -0600 SecurityAgent[1406]: User info context values set for jimfoster
2014-10-10 13:56:15 -0600 SecurityAgent[1406]: Login Window login proceeding
2014-10-10 13:56:15 -0600 loginwindow[1396]: Login Window - Returned from Security Agent
2014-10-10 13:56:15 -0600 loginwindow[1396]: USER_PROCESS: 1396 console
2014-10-10 13:56:16 -0600 airportd[62]: _doAutoJoin: Already associated to “Tiger1”. Bailing on auto-join.
2014-10-10 13:56:16 -0600 kernel[0]: AppleKeyStore:Sending lock change 0
2014-10-10 13:56:16 -0600 launchctl[1415]: com.apple.pluginkit.pkd: Already loaded
2014-10-10 13:56:16 -0600 launchctl[1415]: com.apple.sbd: Already loaded
2014-10-10 13:56:18 -0600 mds_stores[109]: (Error) SecureStore: Access token 285 changed uid from -1 to 503
2014-10-10 13:56:18 -0600 WindowServer[1397]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
2014-10-10 13:56:18 -0600 WindowServer[1397]: Display 0x04280482: Unit 2; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
2014-10-10 13:56:18 -0600 sharingd[1434]: Starting Up...
2014-10-10 13:56:18 -0600 CloudKeychainProxy[219]: librarian connection is invalid: Connection invalid
2014-10-10 13:56:18 -0600 CloudKeychainProxy[219]: librarian connection is invalid: Connection invalid
2014-10-10 13:56:18 -0600 com.apple.InputMethodKit.UserDictionary[265]: librarian connection is invalid: Connection invalid
2014-10-10 13:56:18 -0600 com.apple.InputMethodKit.UserDictionary[265]: librarian connection is invalid: Connection invalid
2014-10-10 13:56:18 -0600 com.apple.InputMethodKit.UserDictionary[265]: -[PFUbiquitySwitchboardEntryMetadata setUseLocalStorage:](760): CoreData: Ubiquity: BarbFister~7FF2AC00-0241-5BB6-A173-7F7630EAB405:UserDictionary
Using local storage: 1
2014-10-10 13:56:18 -0600 com.apple.InputMethodKit.UserDictionary[265]: librarian connection is invalid: Connection invalid
2014-10-10 13:56:18 -0600 UserEventAgent[1416]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
2014-10-10 13:56:18 -0600 launchproxyls[1420]: Waiting for Launch Services seeding, UID 503
2014-10-10 13:56:18 -0600 com.apple.SecurityServer[25]: Session 100025 created
2014-10-10 13:56:18 -0600 com.apple.InputMethodKit.UserDictionary[265]: librarian connection is invalid: Connection invalid
2014-10-10 13:56:18 -0600 com.apple.InputMethodKit.UserDictionary[265]: librarian connection is invalid: Connection invalid
2014-10-10 13:56:19 -0600 xpcd[1422]: restored permissions (100600 -> 100700) on /Users/jimfoster/Library/Containers/com.apple.CalendarAgent/Container.plist
2014-10-10 13:56:19 -0600 xpcd[1422]: restored permissions (100600 -> 100700) on /Users/jimfoster/Library/Containers/com.apple.soagent/Container.plist
2014-10-10 13:56:20 -0600 xpcd[1422]: restored permissions (100600 -> 100700) on /Users/jimfoster/Library/Containers/com.apple.ShareKitHelper/Container.plist
2014-10-10 13:56:21 -0600 accountsd[1469]: assertion failed: 13F34: liblaunch.dylib + 25164 [A40A0C7B-3216-39B4-8AE0-B5D3BAF1DA8A]: 0x25
2014-10-10 13:56:21 -0600 com.apple.SecurityServer[25]: Session 100026 created
2014-10-10 13:56:21 -0600 com.apple.IconServicesAgent[1470]: IconServicesAgent launched.
2014-10-10 13:56:22 -0600 secd[1472]: __EnsureFreshParameters_block_invoke_2 SOSCloudKeychainSynchronizeAndWait: The operation couldn’t be completed. (SyncedDefaults error 1025 - Remote error : No valid account for KVS)
2014-10-10 13:56:22 -0600 secd[1472]: __talkWithKVS_block_invoke callback error: The operation couldn’t be completed. (SyncedDefaults error 1025 - Remote error : No valid account for KVS)
2014-10-10 13:56:22 -0600 secd[1472]: CFPropertyListReadFromFile file file:///Users/jimfoster/Library/Keychains/7FF2AC00-0241-5BB6-A173-7F7630EAB405/ accountStatus.plist: The file “accountStatus.plist” couldn’t be opened because there is no such file.
2014-10-10 13:56:23 -0600 com.apple.time[1416]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
2014-10-10 13:56:24 -0600 secd[1472]: SecErrorGetOSStatus unknown error domain: com.apple.security.sos.error for error: The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
2014-10-10 13:56:24 -0600 secd[1472]: securityd_xpc_dictionary_handler WiFiKeychainProx[1454] DeviceInCircle The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
2014-10-10 13:56:25 -0600 imagent[1452]: [Warning] Services all disappeared, removing all dependent devices
2014-10-10 13:56:27 -0600 imagent[1452]: [Warning] Creating empty account: PlaceholderAccount for service: IMDService (iMessage)
2014-10-10 13:56:27 -0600 imagent[1452]: [Warning] Creating empty account: PlaceholderAccount for service: IMDService (iMessage)
2014-10-10 13:56:27 -0600 soagent[1450]: [Warning] Services all disappeared, removing all dependent devices
2014-10-10 13:56:28 -0600 com.apple.time[1416]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
2014-10-10 13:56:28 -0600 com.apple.IconServicesAgent[1470]: main Failed to composit image for binding VariantBinding [0x203] flags: 0x8 binding: FileInfoBinding [0x129] - extension: lpdf, UTI: com.apple.localized-pdf-bundle, fileType: ????.
2014-10-10 13:56:28 -0600 quicklookd[1480]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x203] flags: 0x8 binding: FileInfoBinding [0x103] - extension: lpdf, UTI: com.apple.localized-pdf-bundle, fileType: ???? request size:128 scale: 1
2014-10-10 13:56:31 -0600 parentalcontrolsd[1485]: StartObservingFSEvents [849:] -- *** StartObservingFSEvents started event stream
2014-10-10 13:56:38 -0600 imagent[1452]: [Warning] Denying xpc connection, task does not have entitlement: com.apple.private.icfcallserver (soagent:1450)
2014-10-10 13:56:38 -0600 imagent[1452]: [Warning] Denying xpc connection, task does not have entitlement: com.apple.private.icfcallserver (soagent:1450)
2014-10-10 13:56:39 -0600 mdworker[1488]: sandbox cache error 3850
2014-10-10 13:56:40 -0600 mdworker[1487]: sandbox cache error 3850
2014-10-10 13:56:50 -0600 launchproxyls[1420]: Launch Services seeding complete
2014-10-10 13:57:04 -0600 WindowServer[1397]: CGXSetWindowListSystemAlpha: Invalid window 56 (index 0/1)
2014-10-10 13:57:04 -0600 Safari[1423]: find_shared_window: WID 49
2014-10-10 13:57:04 -0600 Safari[1423]: CGSClearWindowTags: Invalid window 0x31
2014-10-10 14:13:54 -0600 secd[1472]: CFPropertyListReadFromFile file file:///Users/jimfoster/Library/Keychains/7FF2AC00-0241-5BB6-A173-7F7630EAB405/ accountStatus.plist: The file “accountStatus.plist” couldn’t be opened because there is no such file.
2014-10-10 14:13:55 -0600 secd[1472]: CFPropertyListReadFromFile file file:///Users/jimfoster/Library/Keychains/7FF2AC00-0241-5BB6-A173-7F7630EAB405/ accountStatus.plist: The file “accountStatus.plist” couldn’t be opened because there is no such file.
2014-10-10 14:13:55 -0600 secd[1472]: SecErrorGetOSStatus unknown error domain: com.apple.security.sos.error for error: The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
2014-10-10 14:13:55 -0600 secd[1472]: securityd_xpc_dictionary_handler com.apple.sbd[1528] DeviceInCircle The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
2014-10-10 14:21:38 -0600 sharingd[1434]: dnssd_clientstub DNSServiceRefDeallocate called with invalid DNSServiceRef 0x7fb6ca60a9b0 FFFF0008 DDDDDDDD
2014-10-10 14:22:18 -0600 sharingd[1434]: dnssd_clientstub DNSServiceRefDeallocate called with invalid DNSServiceRef 0x7fb6ca609e30 FFFFFFFF DDDDDDDD
2014-10-10 14:24:40 -0600 kernel[0]: Sandbox: xpcd(1422) deny ipc-posix-shm-read-data /tmp/com.apple.csseed.66
2014-10-10 14:24:40 -0600 com.apple.SecurityServer[25]: Killing auth hosts
2014-10-10 14:24:40 -0600 com.apple.SecurityServer[25]: Session 100022 destroyed
2014-10-10 14:24:40 -0600 com.apple.SecurityServer[25]: Session 100030 created
2014-10-10 14:24:46 -0600 WindowServer[1397]: _CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
2014-10-10 14:24:46 -0600 WindowServer[1397]: _CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
2014-10-10 14:27:52 -0600 system_profiler[1612]: nsc_smb XPC: handle_event error : < Connection invalid >
2014-10-10 14:39:08 -0600 com.apple.IconServicesAgent[1470]: main Failed to composit image for binding VariantBinding [0x18b] flags: 0x8 binding: FileInfoBinding [0x34d] - extension: log, UTI: com.apple.log, fileType: ????.
2014-10-10 14:39:08 -0600 quicklookd[1636]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x203] flags: 0x8 binding: FileInfoBinding [0x103] - extension: log, UTI: com.apple.log, fileType: ???? request size:64 scale: 1
2014-10-10 14:40:11 -0600 kernel[0]: Sandbox: QuickLookSatelli(1638) deny file-read-data /private/var/log/asl/2014.10.07.U0.asl
2014-10-10 14:40:11 -0600 kernel[0]: Sandbox: QuickLookSatelli(1638) deny file-read-data /private/var/log/asl/2014.10.04.U0.asl
2014-10-10 14:40:11 -0600 kernel[0]: Sandbox: QuickLookSatelli(1638) deny file-read-data /private/var/log/asl/2014.10.05.U501.asl
2014-10-10 14:40:11 -0600 kernel[0]: Sandbox: QuickLookSatelli(1638) deny file-read-data /private/var/log/asl/2014.10.05.U0.asl
2014-10-10 14:40:11 -0600 kernel[0]: Sandbox: QuickLookSatelli(1638) deny file-read-data /private/var/log/asl/2014.10.06.U501.asl
2014-10-10 14:40:11 -0600 kernel[0]: Sandbox: QuickLookSatelli(1638) deny file-read-data /private/var/log/asl/2014.10.06.U0.asl
2014-10-10 14:40:11 -0600 kernel[0]: Sandbox: QuickLookSatelli(1638) deny file-read-data /private/var/log/asl/2014.10.07.U0.asl
2014-10-10 14:40:11 -0600 kernel[0]: Sandbox: QuickLookSatelli(1638) deny file-read-data /private/var/log/asl/2014.10.07.U501.asl
2014-10-10 14:40:11 -0600 sandboxd[619]: QuickLookSatelli(1638) deny file-read-data /private/var/log/asl/2014.10.04.U0.asl
2014-10-10 14:40:11 -0600 sandboxd[619]: QuickLookSatelli(1638) deny file-read-data /private/var/log/asl/2014.10.04.U501.asl
2014-10-10 14:40:11 -0600 sandboxd[619]: QuickLookSatelli(1638) deny file-read-data /private/var/log/asl/2014.10.05.U0.asl
2014-10-10 14:40:11 -0600 sandboxd[619]: QuickLookSatelli(1638) deny file-read-data /private/var/log/asl/2014.10.06.U0.asl
2014-10-10 14:40:11 -0600 sandboxd[619]: QuickLookSatelli(1638) deny file-read-data /private/var/log/asl/2014.10.06.U501.asl
2014-10-10 14:40:11 -0600 sandboxd[619]: QuickLookSatelli(1638) deny file-read-data /private/var/log/asl/2014.10.05.U501.asl
2014-10-10 14:40:11 -0600 sandboxd[619]: QuickLookSatelli(1638) deny file-read-data /private/var/log/asl/2014.10.04.U501.asl
2014-10-10 14:40:11 -0600 sandboxd[619]: QuickLookSatelli(1638) deny file-read-data /private/var/log/asl/2014.10.07.U501.asl
2014-10-10 14:40:11 -0600 kernel[0]: Sandbox: QuickLookSatelli(1638) deny file-read-data /private/var/log/asl/2014.10.09.U0.asl
2014-10-10 14:40:11 -0600 kernel[0]: Sandbox: QuickLookSatelli(1638) deny file-read-data /private/var/log/asl/2014.10.08.U0.asl
2014-10-10 14:40:11 -0600 kernel[0]: Sandbox: QuickLookSatelli(1638) deny file-read-data /private/var/log/asl/2014.10.08.U501.asl
2014-10-10 14:40:11 -0600 kernel[0]: Sandbox: QuickLookSatelli(1638) deny file-read-data /private/var/log/asl/2014.10.09.U89.asl
2014-10-10 14:40:11 -0600 kernel[0]: Sandbox: QuickLookSatelli(1638) deny file-read-data /private/var/log/asl/2014.10.09.U205.asl
2014-10-10 14:40:11 -0600 kernel[0]: Sandbox: QuickLookSatelli(1638) deny file-read-data /private/var/log/asl/2014.10.09.U501.asl
2014-10-10 14:40:11 -0600 kernel[0]: Sandbox: QuickLookSatelli(1638) deny file-read-data /private/var/log/asl/2014.10.10.U0.asl
2014-10-10 14:40:11 -0600 kernel[0]: Sandbox: QuickLookSatelli(1638) deny file-read-data /private/var/log/asl/2014.10.10.U501.asl
2014-10-10 14:40:11 -0600 kernel[0]: Sandbox: QuickLookSatelli(1638) deny file-read-data /private/var/log/asl/2014.10.04.U0.asl
2014-10-10 14:40:11 -0600 kernel[0]: Sandbox: QuickLookSatelli(1638) deny file-read-data /private/var/log/asl/2014.10.04.U501.asl
2014-10-10 14:40:11 -0600 kernel[0]: Sandbox: QuickLookSatelli(1638) deny file-read-data /private/var/log/asl/2014.10.05.U0.asl
2014-10-10 14:40:11 -0600 kernel[0]: Sandbox: QuickLookSatelli(1638) deny file-read-data /private/var/log/asl/2014.10.06.U0.asl
2014-10-10 14:40:11 -0600 kernel[0]: Sandbox: QuickLookSatelli(1638) deny file-read-data /private/var/log/asl/2014.10.05.U501.asl
2014-10-10 14:40:11 -0600 kernel[0]: Sandbox: QuickLookSatelli(1638) deny file-read-data /private/var/log/asl/2014.10.07.U0.asl
2014-10-10 14:40:11 -0600 kernel[0]: Sandbox: QuickLookSatelli(1638) deny file-read-data /private/var/log/asl/2014.10.06.U501.asl
2014-10-10 14:40:11 -0600 kernel[0]: Sandbox: QuickLookSatelli(1638) deny file-read-data /private/var/log/asl/2014.10.07.U501.asl
2014-10-10 14:40:12 -0600 kernel[0]: Sandbox: QuickLookSatelli(1638) deny file-read-data /private/var/log/asl/2014.10.08.U0.asl
2014-10-10 14:40:12 -0600 kernel[0]: Sandbox: QuickLookSatelli(1638) deny file-read-data /private/var/log/asl/2014.10.08.U501.asl
2014-10-10 14:40:12 -0600 kernel[0]: Sandbox: QuickLookSatelli(1638) deny file-read-data /private/var/log/asl/2014.10.09.U501.asl
2014-10-10 14:40:12 -0600 kernel[0]: Sandbox: QuickLookSatelli(1638) deny file-read-data /private/var/log/asl/2014.10.09.U0.asl
2014-10-10 14:40:12 -0600 kernel[0]: Sandbox: QuickLookSatelli(1638) deny file-read-data /private/var/log/asl/2014.10.09.U89.asl
2014-10-10 14:40:12 -0600 kernel[0]: Sandbox: QuickLookSatelli(1638) deny file-read-data /private/var/log/asl/2014.10.10.U501.asl
2014-10-10 14:40:12 -0600 kernel[0]: Sandbox: QuickLookSatelli(1638) deny file-read-data /private/var/log/asl/2014.10.10.U0.asl
2014-10-10 14:40:12 -0600 kernel[0]: Sandbox: QuickLookSatelli(1638) deny file-read-data /private/var/log/asl/2014.10.09.U205.asl
2014-10-10 14:40:17 -0600 xpcd[1422]: restored permissions (100600 -> 100700) on /Users/jimfoster/Library/Containers/com.apple.quicklook.ui.helper/Container.pli st
2014-10-10 14:47:08 -0600 com.apple.SecurityServer[25]: Killing auth hosts
2014-10-10 14:47:08 -0600 com.apple.SecurityServer[25]: Session 100030 destroyed
2014-10-10 14:47:08 -0600 com.apple.SecurityServer[25]: Session 100031 created
2014-10-10 14:47:14 -0600 com.apple.appkit.xpc.openAndSavePanelService[1686]: Bogus event received by listener connection:
<error: 0x107c9fb50> { count = 1, contents =
"XPCErrorDescription" => <string: 0x107c9fe60> { length = 18, contents = "Connection invalid" }
2014-10-10 14:49:16 -0600 com.apple.appkit.xpc.openAndSavePanelService[1686]: CGSGetWindowTransformAtPlacement
2014-10-10 14:49:16 -0600 com.apple.appkit.xpc.openAndSavePanelService[1686]: CGSTranslatePointForWindow
2014-10-10 14:49:16 -0600 com.apple.appkit.xpc.openAndSavePanelService[1686]: CGSGetWindowBounds
2014-10-10 14:49:26 -0600 com.apple.appkit.xpc.openAndSavePanelService[1686]: CGSGetWindowTransformAtPlacement
2014-10-10 14:49:26 -0600 com.apple.appkit.xpc.openAndSavePanelService[1686]: CGSTranslatePointForWindow
2014-10-10 14:49:26 -0600 com.apple.appkit.xpc.openAndSavePanelService[1686]: CGSGetWindowBounds
2014-10-10 14:49:26 -0600 com.apple.appkit.xpc.openAndSavePanelService[1686]: assertion failed: 13F34: liblaunch.dylib + 25164 [A40A0C7B-3216-39B4-8AE0-B5D3BAF1DA8A]: 0x25
2014-10-10 14:49:45 -0600 Pages[1681]: view service marshal for <NSRemoteView: 0x7fd3f2883f70> failed to forget accessibility connection due to Error Domain=NSCocoaErrorDomain CodeEtreCheck version: 2.0.1 (82)
Report generated October 11, 2014 at 5:14:56 PM MDT
Hardware Information: ℹ️
iMac (21.5-inch, Late 2013) (Verified)
iMac - model: iMac14,1
1 2.7 GHz Intel Core i5 CPU: 4-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff supported
Wireless: en1: 802.11 a/b/g/n/ac
Video Information: ℹ️
Intel Iris Pro -
iMac 1920 x 1080
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 2 days 7:8:48
This is what EtreCheck came back with:
Disk Information: ℹ️
APPLE HDD ST1000LM024 disk0 : (1 TB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 999.35 GB (975.33 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
User Login Items: ℹ️
None
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 537 - SDK 10.9
3rd Party Preference Panes: ℹ️
Flash Player Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
9% mds
2% WindowServer
1% fontd
0% ps
0% AppleSpell
Top Processes by Memory: ℹ️
189 MB Safari
172 MB softwareupdated
155 MB com.apple.IconServicesAgent
129 MB com.apple.WebKit.WebContent
94 MB Finder
Virtual Memory Information: ℹ️
3.41 GB Free RAM
3.41 GB Active RAM
825 MB Inactive RAM
942 MB Wired RAM
1.68 GB Page-ins
0 B Page-outs -
How can connect my macbook pro mid 2012 to my imac 21.5 inch mid 2010 ?? I want to use imac like a display for macbook.
Target Display Mode: Frequently Asked Questions (FAQ)
with a mini display to mini display cable. Attach it to the Thunderbolt port on your MBP and to the mini display port on your iMac.
How do I enable TDM?
Make sure both computers are turned on and awake.
Connect a male-to-male Mini DisplayPort or ThunderBolt cable to each computer.
Press Command-F2 on the keyboard of the iMac being used as a display to enable TDM.
Note: In Keyboard System Preferences, if the checkbox is enabled for "Use all F1, F2, etc. keys as standard functions keys," the key combination changes to Command-Fn-F2. -
I am planning to buy an iMac 21.5 inch with Fusion drive and 16 GB RAM while i visit USA for a conference. My country of origin is India and the option of configuring to my need is not avaialble here in India. My concern is once i am back to India, will my iMac be covered by the Apple's Protection Plan if something goes wrong here in India?
I recently came across some posts regarding International warranty related issues for iPhone and iPad....hence this crossed my mind...
Waiting for response from the support group members...Thanks Ralph
This essentially means that if my iMac develops some problem (both software and hardware) in my country (India), it will be completeley attended (even the whole system requires replacement) by the AASP in India...is that what you say? -
here is my etrecheck. Any help is appreciated
Hardware Information:
iMac (21.5-inch, Late 2009)
iMac - model: iMac10,1
1 3.06 GHz Intel Core 2 Duo CPU: 2 cores
4 GB RAM
Video Information:
NVIDIA GeForce 9400 - VRAM: 256 MB
System Software:
OS X 10.9.1 (13B42) - Uptime: 1 day 17:29:18
Disk Information:
ST3500418ASQ disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 391.48 GB (245.88 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
BOOTCAMP (disk0s4) /Volumes/BOOTCAMP: 107.76 GB (94.95 GB free)
OPTIARC DVD RW AD-5680H
USB Information:
Apple, Inc. Keyboard Hub
Mitsumi Electric Apple Optical USB Mouse
Apple, Inc Apple Keyboard
Seagate FA GoFlex Desk 2 TB
EFI (disk1s1) <not mounted>: 209.7 MB
Time Machine Backups (disk1s2) /Volumes/Time Machine Backups: 2 TB (1.56 TB free)
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Canon MX870 series
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[System] com.adobe.fpsaud.plist 3rd-Party support link
[System] com.carbonite.launchd.carbonitedaemon.plist 3rd-Party support link
[System] com.crashplan.engine.plist 3rd-Party support link
[System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
Launch Agents:
[System] com.carbonite.launchd.carbonitealerts.plist 3rd-Party support link
[System] com.carbonite.launchd.carbonitestatus.plist 3rd-Party support link
User Launch Agents:
[not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
[not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
[not loaded] com.crashplan.javacheck.plist 3rd-Party support link
[not loaded] com.facebook.videochat.[redacted].plist 3rd-Party support link
[not loaded] com.google.keystone.agent.plist 3rd-Party support link
[not loaded] jp.co.canon.Inkjet_Extended_Survey_Agent.plist 3rd-Party support link
[not loaded] uk.co.markallan.clamxav.freshclam.plist 3rd-Party support link
User Login Items:
iTunesHelper
Adobe Bridge CS4
CrashPlan menu bar
ClamXavSentry
AdobeResourceSynchronizer
Canon IJ Network Scanner Selector2
Internet Plug-ins:
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 2.3.8.1 3rd-Party support link
Musicnotes: Version: 1.18.9 3rd-Party support link
AdobePDFViewerNPAPI: Version: 11.0.03 - SDK 10.6 3rd-Party support link
FlashPlayer-10.6: Version: 12.0.0.38 - SDK 10.6 3rd-Party support link
Silverlight: Version: 4.0.51204.0 3rd-Party support link
Flash Player: Version: 12.0.0.38 - SDK 10.6 Outdated! Update
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0
SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
AdobePDFViewer: Version: 11.0.03 - SDK 10.6 3rd-Party support link
EPPEX Plugin: Version: 3.0.5.0 3rd-Party support link
Scorch: Version: 6.1.0 3rd-Party support link
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Outdated! Update
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
User Internet Plug-ins:
WebEx: Version: 1.0 3rd-Party support link
3rd Party Preference Panes:
Carbonite 3rd-Party support link
Flash Player 3rd-Party support link
Flip4Mac WMV 3rd-Party support link
Bad Fonts:
None
Old Applications:
/Library/Application Support/Microsoft/MERP2.0
Microsoft Error Reporting: Version: 2.2.9 - SDK 10.4 3rd-Party support link
Microsoft Ship Asserts: Version: 1.1.4 - SDK 10.4 3rd-Party support link
Solver: Version: 1.0 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
/Library/Application Support/Carbonite
CarboniteDaemon: Version: 1.1.14 build 604 - SDK 10.5 3rd-Party support link
CarboniteStatus: Version: 1.1.14 build 604 - SDK 10.5 3rd-Party support link
CarboniteAlerts: Version: 1.1.14 build 604 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Office
Microsoft Graph: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Database Utility: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Office Reminders: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Upload Center: Version: 14.3.9 - SDK 10.5 3rd-Party support link
My Day: Version: 14.3.9 - SDK 10.5 3rd-Party support link
SyncServicesAgent: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Open XML for Excel: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Alerts Daemon: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Database Daemon: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Chart Converter: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Clip Gallery: Version: 14.3.9 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011
Microsoft PowerPoint: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Excel: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Outlook: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Word: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Document Connection: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Language Register: Version: 14.3.9 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
Microsoft AutoUpdate: Version: 2.3.6 - SDK 10.4 3rd-Party support link
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
Time Machine:
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 364.60 GB Disk used: 135.61 GB
Destinations:
Time Machine Backups [Local] (Last used)
Total size: 2
Total number of backups: 169
Oldest backup: 2011-04-10 20:10:19 +0000
Last backup: 2014-02-04 22:28:22 +0000
Size of backup disk: Excellent
Backup size 2 > (Disk size 364.60 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
16% Solavant Demo
9% mds
3% CarboniteDaemon
2% WindowServer
2% EtreCheck
Top Processes by Memory:
348 MB firefox
217 MB clamd
135 MB mds_stores
106 MB Mail
102 MB softwareupdated
Virtual Memory Information:
794 MB Free RAM
1.70 GB Active RAM
443 MB Inactive RAM
587 MB Wired RAM
1.13 GB Page-ins
896 KB Page-outsFixing a Mavericks Installation Problem
How to manage a failed OS X Mavericks installation | MacFixIt - CNET Reviews.
Try these in order:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
after the chime press and hold down the OPTION key until the boot manager screen appears.
Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
My iMac G5 17 inch 1.8Ghz freezes after 10.4.11 Update
Hi, I recently bought a used iMac G5 17 inch 1.8Ghz 2004 model and it was working fine until I updated from 10.4 to 10.4.11 in order to update iTunes and get a decent browser. It freezes either immediately upon startup or within 2 minutes and I have to power off by pressing and holding the power button for 5 seconds. I thought something had gone wrong so I zeroed out and wiped the hard disk and reinstalled 10.4. After I applied the 10.4.11 update, The same thing happened with the freezing etc. My friend told me it could be a bad sector on the hard drive so I bought a new one and while I was at it, I upgraded the ram up to 1GB. I also had it checked for bad caps and found none. When performing the 10.4.11 update, same thing. The iMac runs fine in 10.4 so I see no reason why it doesn't after the update. Does anyone have any idea about whats going on? Thanks
General advice on updating Tiger:
It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
The 10.4.11 Combo Updater for PPC Macs is here: http://support.apple.com/kb/DL170
And for Intel Macs here: http://support.apple.com/kb/DL172
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Full details about the 10.4.11 update here: http://support.apple.com/kb/TA24901?viewlocale=en_US
More information on using Software Updater here:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.10 to 10.4.11. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications and turn off energy saving and screensaver.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
[b]If you are updating Safari (or just have):[/b]
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very [i]first[/i] thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 used Safari 3.0.4 which was [i]not[/i] a beta. If Safari 3.1.2 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
Moreover, trying to revert to Safari 3.0.4 (or worse still, version 2) when running 10.4.11 or 10.5 can have repercussions, as Safari 3.1.1 uses a completely different webkit on which other applications like iChat, Mail and Dashboard Widgets etc also rely, and may entail you having to reinstall an earlier operating system.
[b][i]Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on.[/b][/i] Two such add-on that have been frequently mentioned here for causing such problems are Piclens and Pithhelmet. If you have them, trash them.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
/Library/InputManagers
~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later). -
Built In iSight camera has stopped working on 27 inch iMac and 27 inch LED.
The camera's on my 27 inch i7 imac and 27 inch cinema display all of a sudden just stopped working. I checked in the system profiler, and both show that
they are connected. When I try video chat in iChat the green light comes on and connects like it's a one way video chat... when I try and switch to the display monitor's iSight the green light switches to the other monitor, but the camera is still black... I tried this with Facetime, Skype, and Photobooth, all nothing... Any insght into this would be great. I'm thinking that it could be an internal hardware problem with the machine... Logic or Motherboard....
Any info would be helpful
thank you
FBuilt-in iSight cameras
These steps are for iSight cameras that are built into a computer, such as the iMac G5 (iSight) or later, the MacBook, or MacBook Pro.
See if the issue is application-specific.
Try another application (iSight works with applications like iChat, PhotoBooth, and iMovie HD 6) to see if the iSight camera exhibits the same behavior in all applications. If it only happens in one application, try reinstalling that application.
See if the issue is user-specific.
Test your iSight camera in another user account. If the issue only occurs in one user, the issue would be isolated to user settings.
Find out if the computer recognizes the iSight
Check System Profiler (in the Utilities folder, inside the Applications folder). Under the USB header, check to see if the iSight camera is detected.
Reset SMC or PMU
Reset your computer's SMC or PMU, and then check System Profiler again. (SMC reset instructions for iMac G5 (iSight), Intel-based iMacs; PMU reset instructions for MacBook and MacBook Pro.)
source: http://support.apple.com/kb/ht2090 -
My iMac (21.5-inch, Mid 2010) has rebooted twice now for no apparent reason, since the successful install of Yosemite.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway. -
IMAC 21.5-inch, Mid 2011 not display internet news pictures
Help, please. My iMAC 21.5-inch, Mid 2011 does not display internet news pictures. How can I 'fix' this?
I had no problems watching the streams & videos using FF v23.0.1.
Make sure you are using the latest version of Adobe Flash Player
Check Flash Version
Adobe strongly recommends that you first uninstall any previous version of Flash Player, using the uninstaller:
http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html#main_1 0_4
Follow the instructions closely, such as quitting ALL applications first before installing. Repair permissions and restart your computer after the installation is completed.
Authored by Klaus1
Since I cannot read German, I was wondering if there was some sort of "Help" listing at the bottom of the website you linked? If so, there should be a section or a FAQ section that should tell you what you need and/or the system requirements to watch their streams & videos. -
IMac 21.5 inch Ethernet connection problem
I just got this iMac 21.5 inch 10,1 (Late 2009) about 1 week ago and what happens now is that Ethernet got some issue. Every time when start the PC, there is no connection with router although cable is connected. In the network window, it show Ethernet cable is unplugged. So I've to physically unplugged from either 1 end and re-plugged in again to get connected. Strange thing is my airport connection is working smoothly and my router to another PCs are also working normally. Can anyone care to share what could be the possible cause of this issue and how to resolve it. Thanks in advance.
P.S. Once it is connected, it working normally till restart again.You can try a different Ethernet cable, but if it works after plugging back in, I don't think it would be the connection point. If it was, you should be able to disconnect and connect it while the iMac was off, and when you turn it on, it should work.
With AirPort turned off and Ethernet connected and working properly, open System Preferences Network pane. Where is says Locations, select +Edit Locations+. Click the plus sign to create a new location. Set up the new location's network settings as needed, and Apply. When using the new location, is there any improvement? -
System trouble, Need 2 back up iTunes & purchased music.
I am having some relatively minor, but none the less annoying glitches with my System Using OS-X.3 Panther. (Classic not installed, I use OS9 on diff. partition) I am planning on Zeroing out the drive & partition OS-X resides on & starting with a fresh System.
I am currently using OSX.3/ iTunes v4.7/ QuickTime v6.4. I do not plan on doing any upgrading of the applications or system files beyond what was required to use my current suite of software.
One of my biggest concerns is, I have roughly 5 gigs of music (I have it backed up on DVD's). I have a number of mp3's I purchased through the Apple music store and I want to be sure that I still have them available to me after the fresh system install.
I have done a few searches here but I'm not asking the right question or using the best "Key" words. I've pieced together some of the procedures to do this properly, but I want to be sure that I have it all, in proper order before I risk losing what is a fairly significant investment in music.
Here is a (sort of) brief description of my system troubles;
The iTunes & iPod have been working fine, with only a few minor hiccups. The rest of my system has been a little touchy lately. Internet apps., (news readers & safari & the like) quitting unexpectedly or freezing, requiring a forced quit. Document & App. Icons doing weird things like changing back & forth, (between low res. & quartz type). All the free disk space starts to spontaneously fill up. Stuff like that!!
Norton AV v9.0.3 doesn't seem to find any virus to account for it, (although Norton seems to have some problems of it's own I won't go into here). It has detected a couple trojans in web cache files recently, but it quarantined them & I deleted the files so hopefully they aren't the problem. (I delete & keep re-deleting the NAV "spacesucking" file, disk still fills up)
I've run DiskWarrior, repaired permissions, used disk first aid & these problems seem to persist. So I've decided to start again from scratch.
If it isn't to much trouble, I would very much appreciate a complete, step by step breakdown on how to re install X, without messing up iTunes or my purchased music & iPod. (or at least a link to any already posted guidelines for this procedure)
Thank you for your patience,
Craig
p.s. (I realize I included a lot of system troubleshooting information that might not be particularly relevant to backing up iTunes, but I wanted to be sure that I included everything that might affect a clean install, and someone might recognize the problems I'm having and help me avoid breaking the system next time) Thnx!!Craig hello,
read this post for a starter... check all of it for your reference to backups and anything else you need to know come and ask...
TP2GO, "iTunes 5.0 a disgrace; Lets stop buying music for a month!" #23, 01:02am Sep 24, 2005 CDT
One tip, get rid of the 'Norton'... search the OS X forums for it and you will see what I mean ... here is one to start with....
Barry Hemphill, "Application Problem" #1, 05:07pm Sep 30, 2005 CDT
take care .... TP -
I have an iMac 21.5 inch purchased in 2011 with a failing 1TB Seagate hard drive. Can I get a replacement hard drive thru the Apple Replacement Program? I did purchase the Applecare Plan but it expired in Dec. 2013.
FWIW, if you purchased the iMac in 2011 and purchased Applecare, you are covered for a total of 3 years. You mentioned yours expired in December 2013 - that cannot be unless you bought yours in 2010. If you bought it in December 2011, you should still be covered until December 2014 - if so, contact Apple/make a Genius Bar appointment quickly so the replacement is covered by the warranty. The hard drive replacement program might have expired, but as long as you're covered by Applecare, a drive replacement is covered.
-
Macbook pro 13 inch vs iMac 21,5 inch (again ^^)
Hello everyone,
First thanks in advance for replying!
My situation:
Have an old iMac 17inch core 2 duo 2GHz with 1GB of RAM.
I don't have a laptop but i would like to have the portability of one, but it itsn't a necessty for the work i wanna do. (i can find a way around it all if need be)
What i do on my mac:
Most of the time i use my mac for web browsing, watching youtube video's, movies, TV shows, and social media, and as a hobby i'm into photography.
Currently i'm using iphoto to edit my photo's and while i find it good and practical i want to do a little more than what iphoto can do. I want to start using aperture for editing. Now remember it's as a hobby it's nothing hardcore just basic editing (black and white, saturation, adjusting colour and stuff).
So i'm going to buy myself a new Mac because this one is getting real slow when editing, even in iphoto. (takes like 5minuts to save the edited photo is way to long) Now i know i can upgrade the RAM for not much money but i want a new machine.
I'm at a dillema. Should i get the macbook pro 13 inch i7 or the imac 21,5 inch same price point?
If i get the macbook pro I would be using it somewhat like this: 90% desktop with external monitor 24inch and 10% portable.
(Like when i'm going on vacantion to edit some photo's or use it as storage for them, sitting downstares not behind my desk, take it a friends house. But all this i can miss if need be)
Now for the questions
Is the macbook pro 13 inch going to cut it as a desktop computer + monitor while using aperture as the heaviest program ever and multi tasking?
Do i need the graphics card and quad core of the imac for aperture?
ThanksCan't use the ipad for my travels
I can't put my RAW photo's from my DSLR onto the ipad to "save them" for later editing.
Thank for the reply!
Maybe you are looking for
-
Help! On ios app store, in featured I accendently tapped app starter kit and I can't get out!
Help! On ios app store, in featured I accendently tapped app starter kit and I can't get out! I closed the app out of mutlitasking, hit the featured button multiple times, but nothing happened! There's not even a back button! I can still see top 25,
-
How do i save a video from an email?
does anyone know how to save a video to my camera roll from an email? i have ios7. ive tried everything i can think of, someone help!
-
HT201441 what if the previous owner is not available how am i going to use the phone?
i have iphone4 which i bought from a friend but there is no way i can contact him i have reset the phone but its asking his icloud account to do the reset how can i remove his account
-
IPhoto has duplicate pictures when browsing iPhone photos
It's really strange. I plug in my iPhone and iPhoto displays duplicate of all photos, but my iPhone continues to only have 1 copy. I kept trying to upload all 5,700 photos but iPhoto kept freezing on me. I re-opened it to try again and again then I n
-
Hello all. Has anyone seen where you try to view items in the object browser by selecting the object type in the pull down menu, and no matter what you select, the browser window automatically closes? It just started exibiting this behavior and I hav