Imac i7 and Leopard

Hi everybody,
is there any problems with downgrading with Leopard on a 27" i7.
The cause is Pro Tools and his (very bad) beta snow leopard version.
I heard about Airport problems.
Has anyone tested new iMac with 10.5.8?
Thanks

Welcome to Apple Discussions.
Please read ABrody's topic New Macs, and what to do about them? where it clearly says this cannot be done.
Regards,
Roger

Similar Messages

IMac Keyboard and Leopard

Hi
I have just upgraded to a new 20" iMac from a Mac mini running Leopard. When I got the iMac home, it came with he Leopard CPU drop-in DVD to upgrade from Tiger. When I used the Leopard Install DVD to restore the system I was using on the mini from a time machine backup, the new keyboard stopped working. I had to plug in another and I have downloaded 3 different updates and installed to no avail. Anybody have any thoughts?
Thanks
Garrett

I just upgraded a Mac Mini last night from Tiger to Snow Leopard, and I'm now experiencing the same problem. Details:
If I Safe Boot, the problem goes away, so it's clearly an issue with something loading up in software.
I had 4 login items:
Google Software Update
Cisco Clean Access Agent
Microsoft AU Daemon (from Office 2004)
iTunes Helper (10.2.1)
I say "had" because I trashed the Cisco Agent since the version I had doesn't work with Snow Leopard anyway.
I do not have an "Other" below Accounts.
In my Library/Startup Items, I have a few items from Parallels (I think version 3, which is old too). Not sure how to disable these without deleting them. I do have a newer Parallels installation disc lying around that I never bothered to install.
I'm not using an Apple mouse - it's a Logitech wireless mouse with a Logitech USB dongle plugged into the back of the Mini.
I'm using a Kensington keyboard.
I don't use Safari regularly as Firefox is my daily web browser. I don't empty the Safari Cache or the History List regularly (it should be pretty empty anyway, since I use Safari probably once every 3 months).
My Hard Drive has 11GB free (it's an 80GB drive, so that's a decent amount of free space).
Any suggestions on how to proceed?

IMac (Late 2006) Stalls with EFI 1.2 and Leopard

A few days ago, I installed both the iMac 1.2 EFI Firmware update and Leopard on my late 2006 20" iMac. Since then, I've seen random momentary stalls throughout the system.
It sometimes happens while scrolling a web page, displaying a sheet, opening a stack, browsing CoverFlow, and so on. I don't know how to intentionally recreate it, it just seems to happen. It often (always?) seems to coincide with some disk activity.
I don't remember this behavior on the same hardware in the past, so either it's something with the firmware update or Leopard. Has anyone seen anything else like this?
Thanks in advance.

Some people reported various bugs after installing the firmware update. Shutting it off and turning it back was all that was needed to fix the bugs.

Microsoft Office 2004 (Word) unable to save files I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and cr

Microsoft Office 2004 (Word) unable to save files
I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and create a new document but I cannot save it. I reinstalled Word but that didn’t help. Then went to the Internet and found at least one other Mac user having the same problem which it suggests is caused by a recent Mac Security Update:
http://answers.microsoft.com/en-us/mac/forum/macoffice2004-macword/word-2004-wil l-not-open-or-save-documents/b04eb870-9b0d-4f3b-bb47-b122301e36f6
So I check for a new Mac Security Update and sure enough there was one. I downloaded it and now Word seems to be working, as it should. I can both open and save files. The only problem remaining is that when I open Word I get the following error message “An unexpected error occurred while trying to load the Microsoft Framework library”. I contacted Apple but they were unable to help.
How can I get rid of this error message?

Look, I realize you might have to get your machine working, so this is how you revert back.
Restore proceedure to pre-Security Update 2012-001 v 1.0 & v 1.1
#1 Backup your personal data off the machine.
Backup files off the computer (not to TimeMachine). If you don't have a external drive, get one and connect to the USB/Firewire port and simply drag and drop copy your User folder to the external drive, it will copy all your files. It's best to have two backups of your data off the machine when trying to restore.
Disconnect all drives now to prevent any mistakes from occuring.
#2 Reinstall OS X 10.6 from disk
Get out your 10.6 install disk and make sure it's clean and polished (very soft cloth and a bit of rubbing alcohol, no scratches) If your disk is borked, you'll have to order a new one from Apple with your serial number.
Hold c boot off the 10.6 disk (wired keyboard, internal optical drive), use Disk Utility First Aid to >Repair Disk of your internal drive (do not format or erase!!), Quit DU and simply re-install 10.6.
Note: Simply reinstalling 10.6 version from disk (without erasing the drive) only replaces 10.6.8 with 10.6.x and bundled Apple programs, won't touch your files (backup anyway) or most programs, unless they installed a kext file into OS X itself. (only a few on average do this)
#3 Update to 10.6.8 without Security Update 2012-001 v1.0 or v1.1
Reboot and log in, update to 10.6.8 via Software Update, but EXCLUDE THE Security Update 2012-001 by checkinig the details and unchecking the blue check box.
#4 Reinstall any non-working third party programs
When you reboot, make sure to reinstall any programs that require kext files installed into OS X, you'll know, they won't work when you launch them or hang for some reason as they are missing the part they installed into OS X.
If for some freakish reason you get gray screen at any time when booting (possible it might occur when you reinstall older programs), hold the shift key down while booting (Safe Mode, disables kext files) and update your installed third party software so it's compatible with 10.6.8.
https://support.apple.com/kb/TS2570
That's it really.

I used Target mode to transfer files to a new iMac running Snow Leopard 10.6.8 from an older Dual core Intel machine (EMC 2105) also on 10.6.8. but originally Tiger 10.4. The operation was successful and I ejected the disk icon from the new machine and po

IS THE SITUATION HOPELESS
I used Target mode to transfer files to a new i7 iMac running Snow Leopard 10.6.8 from an older Dual core Intel machine (EMC 2105) also on 10.6.8. but originally Tiger 10.4. The operation was successful and I ejected the disk icon from the new machine and powered down the old machine. When this was restarted the next day there was a grey screen with flashing Mac symbol alternating with a 'no entry' sign and occasionally a question mark.Keyboard and mouse were unusable so k inserted the original instal disc (No.1 for 10.4. with installer 1.0.4) which came with the machine in 2006 in an attempt to boot from this. The ensuing window said this was not possible and now it cannot be ejected.I have tried everything ! It offers Disk Utility and other options like Terminal but that doesn't work either.I 'repaired disk' and that was pronounced o.k. None of the various keystrokes at start up will work, and the computer will only offer the installer disc continually.The only option would seem to be is to erase the hard drive completely from the disc in the machine.I don't want to do this as there is still material which I need to recover. I think the drive has in some way been corrupted by using it in target mode, and I don't know if there are any other options to try.
Please tell me how to get this disc to eject !

Graham Giles wrote:
Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
• I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
I know that using a cloned drive would work well in this instance.
I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive?

I have an imac with snow leopard. I do not have enough memory to get lion. I switched my mail to icloud and now my ipod touch has icloud. i can receive mail on my ipod touch and through the icloud web site, BUt I cannot receive mail on my mac directly

I have an imac with snow leopard. I do not have enough memory to get lion.
I switched my mail to icloud and now my ipod touch has icloud.
i can receive mail on my ipod touch and through the icloud web site, BUt I cannot receive mail on my mac directly any more. There is an exclamation point on my mail in box and also an ! on .mac.
Can anyone help me with settings so I can receive mail again directly on my mac?
Thanks
Mathmarv
<Edited by Host>

See this Apple note on troubleshooting icloud mail: http://support.apple.com/kb/TS4002
You may have seen this page already: http://www.apple.com/support/icloud/mail-notes/

I upgraded my 3 yr old iMac to Snow Leopard and now my HP C4150 Scanning function doesn't work (not recognized). I downloaded updated Drivers from the HP site, but still no joy. Any suggestions?

I upgraded my 3 yr old iMac to Snow Leopard (OS X 10.6) and now my HP C4150 Scanning function doesn't work (not recognized). I downloaded updated Drivers from the HP site and installed them, but still no joy. Any suggestions?

aspaceman,
Perhaps I owe you an apology. Having re-read that downloading from HP was unsuccessful I feel uncomfortable. Can I suggest you update your 10.6 system (as noted in your profile) to 10.6.8 (if it is not already there) by using the
Mac OS X 10.6.8 Update Combo v1.1 combo update plus any software updates that then apply.

My 2006 iMac running Snow Leopard won't boot even after erasing and re-installing Snow Leopard (via my MacBookPro), either from the HD or DVD drive. Can't get it to run Hardware Test. Disk Utility says disk OK - files are there. What can I do?

My 2006 iMac running Snow Leopard won't boot even after erasing and re-installing Snow Leopard. I erased and re-installed by putting the iMac in Target Disk mode and usin my MacBookPro as the host. But after numerous attempts I still can't get it to boot either from the HD or DVD drive. I just get the white screen after the wheel stops spinning. I can't get it to run Hardware Test - just get the white screen. If I use Disk Utility via my MBP it says the disk appears OK. All the Snow Leopad files appear to have been installed. What can I do?

Hi-NRG Bwoy wrote:
I erased and re-installed by putting the iMac in Target Disk mode and using my MacBookPro as the host.
Reet the SMC and the PRAM
 Cheat sheet to help diagnose and fix your Mac
Perhaps you installed the wrong version OS X onto the iMac, you can't use the disk from another Mac.
clean the disk.
If it's not working then use this method to create a bootable 10.6 USB from the iMac machine specific 10.6 disk or the 10.6.3 retail disk on your other Mac, use it to boot the iMac with.
http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
How to erase and install Snow Leopard 10.6

Is there a way for my macbook air (running Lion) to access an external hard drive on my Imac (running snow leopard) specifically for Iphoto and itunes?

Is there a way for my macbook air (running Lion 10.7.2) to access an external hard drive on my Imac (running snow leopard 10.6.8) specifically for Iphoto and itunes?

Yes. For those two applications specifically there is sharing. This presumes both computers are on and connected to the same network.
In iPhoto, enable sharing by (on the iMac) going to the iPhoto menu > Preferences > Sharing > check Share my photos. You can either share the entire library or only selected albums. Now on your MacBook Air, in iPhoto, go to the same preference pane and select Look for shared photos.
iTunes has something similar. In the iTunes menu > Preferences > Sharing > check Share my library on my local network. On the other computer, look in the left column for SHARED and select the iMac. You can now play that music on the MacBook Air.
There are other ways to share files but for those two applications this is the simplest way.
Best of luck.

I have a new time capsule, want to use it in conjunction with iMac G5 and MacBook; laptop runs Snow Leopard but G5 can't install Snow Leopard, is stuck at OS 10.4.11. Am I doomed? Can anyone advise me? Thanks..

I have a new Time Capsule, want to use it in conjunction with an iMac G5 and a MacBook. MacBook runs Snow Leopard, but G5 (lacking Intel processor) can't install Snow Leopard, is stuck at OS 10.4.11. Am I doomed? Will appreciate any advice. Thanks.

you should still be able to get a copy of Mac OS X 10.5 (Leopard), which should run on your G5.

I am contemplating purchasing an iPad, and then possibly a Macbook pro. Currently, I have an iMac G5, and a Powerbook G4. Neither which can be upgraded past Leopard. My question is do I need to have Snow Leopard in order to be able to update an iPad?

I am contemplating purchasing an iPad, and then possibly a Macbook pro. Currently, I have an iMac G5, and a Powerbook G4. Neither which can be upgraded past Leopard. My question is do I need to have Snow Leopard in order to be able to update an iPad? Do I need to reverse my thought on which to buy first?
I plan on keeping the iMac and PB until they cease to work ( have replaced HD's on both already). I mostly use the PB-- lots of writing, surfing, email, etc.
Your thoughts?

The minimum Mac specs (from http://www.apple.com/ipad/specs/) are :
Mac computer with USB 2.0 port
Mac OS X v10.5.8 or later
iTunes 10.2 or later recommended (free download from www.itunes.com/download)
iTunes Store account
Internet access
So you only need Leopard, not Snow Leopard

I have a 27inch iMac with snow leopard and 1 user, and a 24 inch (older) upgraded to yosemite and 5 users. I want to wipe the 27 inch and transfer everything on the 24 to it. I do have time capsule 3tb but not sure how to do it

I have a 27inch iMac with snow leopard and 1 user, and a 24 inch (older) upgraded to yosemite and 5 users. I want to wipe the 27 inch and transfer everything on the 24 to it. I do have time capsule 3tb but not sure how to do it

Move your content to a new Mac - Apple Support

I used Roxio VHS to DVD for Mac (have iMac with Snow Leopard) and the audio does not synch with the video when playing in iMovie. Any suggestions to fix?

I used Roxio VHS to DVD for Mac (have iMac with Snow Leopard) and the audio does not synch with the video when playing in iMovie. Any suggestions to fix?

Thanks for the reply. I tried playing with detaching the audio in iMovie, but with 20+ hours of video to correct, it would take too long. After 28 hours, Corel/Roxio tech support replied that it is a known bitrate mismatch problem and they have no real fix. I strongly suggest not to buy this product.

I want to upgrade iMac to Snow Leopard, can I use the (DVD-Mac OS X 10.6.3) that I got with the 15" MacBook Pro that totally died, and upgrade iMac from that DVD

I want to upgrade my iMac to Snow Leopard, can I use the (DVD-Mac OS X 10.6.3) that I got with my purchase of the 15" MacBook Pro that totally died, and upgrade the iMac from that DVD that came with the laptop ? Thanks

No, that 10.6.3 DVD is system specific to the MacBook Pro.
You need a Snow Leopard Upgrade > Mac OS X 10.6 Snow Leopard - Apple Store (U.S.)
or if a MobileMe users > Apple throws MobileMe users a free version of Snow Leopard

I have a imac running snow leopard 10.6.8 and have adobe cs5. Is it safe to update to mountain lion 10.8.2 and keep adobe CS5 running properly?

I have a imac running snow leopard 10.6.8 and have adobe cs5. Is it safe to update to mountain lion 10.8.2 and keep adobe CS5 running properly?

You should not. But it never hurts to have a backup because bad things can happen.

Imac i7 and Leopard

Similar Messages

Maybe you are looking for