IMac input doesn't allow me 2 mono channels. Why?
All I want to do is record Singing and Playing guitar at the same time with 2 mics.
I have 2 mics set up through a small mixer, then out the main L/R out of the mixer where the 2 cords are combined to one stereo 1/8th inch plug that is inserted into my iMac's input.
When I designate the Garagband tracks as Mono 1 and Mono 2 - the Mono 1 track picks up both mics, and Mono two picks up nothing.
I've hard panned my mixer so the signals should be L/R, but I don't know why garageband doesn't see this as two tracks. This is getting really frustrating, and I don't know what is going on. I'm about to break down and buy a USB audio interface, but this seems so simple, and it sounds good so what gives? Any thought or help is greatly appreciated!
the most likely suspect is the adapter. it's probably 2-stereo-INs to 1 stereo-OUT when what you need is 2 mono-INs to 1 stereo-OUT
Similar Messages
-
after restoring my iMac to factory settings it doesn't allow me to get iPhoto, iMovies and pages, which i had from the os x update. anyone knows how to recover them, as they are not on the purchased items? thanks
From your backup.
-
in my Imac I don't see the icloud icon, still have the mobile me and it doesn't allowe me to change that, what do i do please.
Please always state your operating system when you have a question. Lion 10.7.2 minimum is required for iCloud; the Preference pane does not appear in earlier systems.
-
Screen Saver doesn't allow SOURCE SELECTION but automatically begins to download unknown files. I have to force quit, but it does the same thing each time I try to select a source.
Do you realize that you're talking to yourself?
iMac refurb (27-inch Mid 2011), OS X Mavericks (10.9.4), SL & ML, G4 450 MP w/Leopard, 9.2.2 -
my iMac with os x allowed me to edit my administrator in preferences with my info and i didn't select the administrator priv. box now my mac has no administrator is there a fix for this or does it need a re-install
Apple support article:
Startup Grey Screen
You can try to check your hard drive.
Apple Hardware Test doesn't catch everything, so even if it doesn't find a problem, you could have one.
Apple Hardware Test -
Autofill file doesn't allow editing or deleting
In Safari on my iMac 5 autofill doesn't allow removal of any user names or passwords. Safari has problems and I think this file is corrupt.
Can the file be deleted so it can be created again through Safari?Passwords are stored in Keychain Access /Applications/Utilities
And from the Safari menu bar click Safari / Preferences - Auofill
Click the Edit button to the right of: User names and passwords
Make selections(s) then click Remove.
If you still can't remove user names and passwords from the Autofill pane, try troubleshooting the Safari. plist file. (preferences)
Go to ~/Library/Preferences. Move the com.apple.Safari.plist file to the Desktop.
Quit then relaunch Safari to test. If that helped, move the .plist file to the Trash.
~ (Tilde) character represents your Home folder.
If that didn't help, quit Safari. Open a Finder window select your Home folder in the Sidebar on the left. Then open the Library folder, then the Caches folder, then the com.apple.Safari folder. Move the cache.db (or ApplicationCache.db) file from the com.apple.Safari folder to the Trash. Relaunch Safari. -
When trying to download an app on my iPad 3 it asks my to create and answer 3 questions. I can complete the first 2 but the system doesn't allow me to complete the 3rd question! Can anyone help.
Welcome to the Apple Community.
You might try to see if you can change your security questions. Start here, change your country if necessary and go to manage your account > Password and Security.
I'm able to do this, others say they need to input answers to their current security questions in order to make changes, I'm inclined to think its worth a try, you don't have anything to lose.
If that doesn't help you might try contacting Apple through Express Lane (select your country, navigate to iCloud help and enter the serial number of one of your devices) -
How do I get messages to go back to an AIM account? It's only seeing the iPad's Facetime email address and not seeing the old AIM account name that is on my desktop. I am using my iMac using iChat to talk to a newer iMac that doesn't have iChat. We had this working using Messages and Facetime (on the new machine) talking to my existing iChat account. One day last week, when Facetime rang, my kids answered on the iPad. Dang! Now it's all fouled up! The new iMac won't see my AIM account name and shows that I'm offline, because the iPad is off. We were able to call using "most recent call" in Facetime, but now I can't go and control that new iMac remotely to help with some email concerns the user is having. I'm trying to not personalize this too much, but it's grandkids talking to Grandma and Mom and Dad trying to solve new machine hiccups. Normally, I could just go in via iChat and control the other machine and troubleshoot, but I can't do it with Facetime only. My buddy list doesn't see the other computer even though we are connected on Facetime right now. My name is not highlighted for the other computer. What could have gone so wrong?
Any help would be appreciated.How do I get messages to go back to an AIM account? It's only seeing the iPad's Facetime email address and not seeing the old AIM account name that is on my desktop. I am using my iMac using iChat to talk to a newer iMac that doesn't have iChat. We had this working using Messages and Facetime (on the new machine) talking to my existing iChat account. One day last week, when Facetime rang, my kids answered on the iPad. Dang! Now it's all fouled up! The new iMac won't see my AIM account name and shows that I'm offline, because the iPad is off. We were able to call using "most recent call" in Facetime, but now I can't go and control that new iMac remotely to help with some email concerns the user is having. I'm trying to not personalize this too much, but it's grandkids talking to Grandma and Mom and Dad trying to solve new machine hiccups. Normally, I could just go in via iChat and control the other machine and troubleshoot, but I can't do it with Facetime only. My buddy list doesn't see the other computer even though we are connected on Facetime right now. My name is not highlighted for the other computer. What could have gone so wrong?
Any help would be appreciated. -
I purchased the adobe suite cs6 a few years ago on a cd, installed it on another computer, and now I got the imac that doesn't have a cd drive, how do I install the adobe suite onto my new computer without having to use the cd?
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
Firefox did an automatic update to 6.01, and now my middle mouse button is not working in the browser. It doesn't close tabs, it doesn't open new tabs by middle clicking a link, it doesn't allow me to middle click to scroll the page..
[BUG FIXED, see "EDIT 2" at the end of my post]
I'm on Firefox 3.6.21, and I got this problem today after a Greasemonkey update (To version 0.9.10, apparently).
Disabling Greasemonkey solved the problem, and re-enabling it reproduced the problem (middle-clicking links to open in new tab did not work, merely highlighted the link).
I should also note that while Greasemonkey was enabled and the bug was affecting me, Ctrl+Click to open links in new tabs was also broken.
I hope this helps!
EDIT: It appears this is a known incompatibility/conflict bug between current versions of Greasemonkey and Tab Mix Plus. Read more here:
https://github.com/greasemonkey/greasemonkey/issues/1406
EDIT 2: GREASEMONKEY HAS NOW BEEN UPDATED with a workaround to fix the problem. Go to https://addons.mozilla.org/en-US/firefox/addon/greasemonkey/versions/ to install the update manually. It hasn't been reviewed by Mozilla yet, so it won't be an automatic update for another day or two. All credit to "cannonfodder" below for noticing this; please mark his post as helpful! -
How do I reinstall Adobe Creative Suite on my iMac that doesn't have a CD drive?
How do I reinstall Adobe Creative Suite on my iMac that doesn't have a CD drive?
I had to wipe my hard drive including my apps and I don't know how to reinstall my adobe software.
Please helpDownload and Installation Help -
https://helpx.adobe.com/download-install.html
You will need your serial number. If you have the discs you should be all set. If not, then you should be able to find it thru your Adobe account online if you registered the software previously.
You might want to contact Adobe Support thru chat before you activate the new installation if you would like to free up the activation that might have been left in limbo.
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC ) -
How do I choose the $40.00 Icloud plan? When I attemp this, it doesn't allow me to click "next."
The only way it allows me to click "next" is if I choose the $100.00 plan. The email that was sent to me says that I should upgrade or reduce storage because my plan will be reduce to 5GB as of September 30, 2013. Please advise.Try Settings>iCloud>Storage & Backup>Change Storag Plan. If you are a former MobileMe user you should see Purchase Current Plan listed between the 20GB and 50GB options.
-
IMac - Display doesn´t work after restart
My iMac 21 Display doesn´t work after restart. If I turn it off and 1 hour later I want use it again the iMac shows the white screen with the mac logo and then the display goes off. I connected an external display to check if the iMac was ON and with the external display I can login and do everything but the iMac Display doesn´t work .
If I turn it off and wait 3 or 4 hours and then turn it back on the display works OK.
This is very strange behavior I have spent hours and hours trying to fine the solution or a similar issue but nothing so I am looking help here at apple.com
BTW When I bougth the iMac 21 there were some spots over the display so the display was replaced by the provider. The warranty has expired by now.To tell you the truth, I don't know if they have to repalce the LCD panel or what they do for a bad backlight. In this reality of block or assembly replacement it probably involves repalcing the panel and not the backlight component. Don't know what it would cost. You'd have to ask that of a service center.
-
Migration Assistant doesn't allow me to choose what drive.
Well, I got my new computer. I tried to migrate a drive from my old computer using Migration Assistant. and it doesn't allow me to choose what drive.
In my old computer I have 5 drives. The original HD (was 10GB, was replaced last year by a 40 GB) and on my Hitachi 250 GB drive that I added 2 years ago, there's a partition with 4 drives.
I wanted to migrate one particular drive from there (called Current work).
First I did a mistake. I connected both computer via the firewire in the afternoon when there was enough daylight so I don't have to do it later at night (the computers are under the table.) I thought it's OK since I'm not pushing any button yet ("migrate now", "transfer", and such).
I turned on the new computer and a message appeared: you must restart.
That's strange, I said to myself. it's a brand new computer. Usually It says that when there's a problem, but OK I restart and when it's back on, I see that my external drive (Neptune from OWC which was still hooked up in the old computer) is on the desktop. And it took just a few seconds. I open it and all the files, etc. are there. It did copy the whole external drive !
I'm not an computer expert but I believe the Mac Pro did notice that's there's a firewire hooked up and then, without asking me, migrated the external drive and that's why it asked me to restart. I would have prefer if it tells me "restart so migration can begin".
I don't mind for now that my external drive is on my new computer. I can always erase it if I don't want it. It is still external right ? so it doesn't intrude on the 640 GB of my HD so I just keep it.
But it also copied/migrate Mac HD 40 GB which is full of OS 9 and I almost never use it anymore. I don't want it coz it has applications and they advise not to migrate applications (certainly not applications with issues).
They say migrate folders, settings but re-install applications.
And it migrated also another drive called "Scratch" which has only personal date no system, no software.
Anyway, I erased everything and re-installed using the Install disk that came with the computer.
BTW, what they say in the manual (p. 90: Re-installing the software that came with your Mac Pro) is different than what really happens.
They say insert disk, double- click on Install and then click options in the "Select a destination" pane of the installer. Then click "erase and install" Problem is: there's no "Select a destination" pane. Or any options.
I had to go to Disk utility and erase, then re-install OS X.
Then re-install the applications using "Install applications" (the other disc that came with the computer. )
OK, I did that. Then while everything is empty, new, I used Migration Assistant.
Now here is the reason why I post this.
They say hold T key until you see a firewire icon then select a drive. I can't see when there's an icon coz I have only one monitor, so I just hold and hold the T-key and turn on the old computer. The screen shows "waiting for you other computer to restart" 2 min.... 5 min... 7 min. Nothing happens. I stop holding.
I look at the desktop and I see that the icon of the old 40 GIG Mac HD is there. (and I believe with a firewire logo, but not sure about that.)
I have the impression that if I kept the T-key longer it would have migrate the other drives as well.
They say keep the T-key down until you see the firewire (then let go I suppose. As I said I don't see what's going on on the desktop of my old computer so I kept the T-key for a few minutes. I also tried another time to let go after 1-2 min. No difference.
I shut down the new comp. and the old computer screen appears automatically (both are connected to the monitor; the old with analog port, the new with digital port) and sure enough the firewire icon is moving on the screen.
I go back to the new computer and put the old 40 GIG Mac HD in the trash. Actually, when it touched the trash, I just saw an eject icon and the drive disappear. Did not go in the trash which is empty. So I guess I ejected, not sure what's the difference but I looked for it to see if it's anywhere in the computer. Could not find it. Not in the HD, not in the desktop. Good, I don't want it there. Is it hidden somewhere ?
So I tried again but wondering perhaps the old computer should RESTART not turn on (it was off) so now I wait until it's on, then push restart. I hear the gong when it shuts off but that's it, no other gong when it comes back. I keep the T-key. But nothing happened. Just see the message "waiting for your other computer to restart"
PS: BTW Target mode (which seems to me similar to Migrating with "Migration Assistant") will not work for me because it must be SATA, mine is ATA.
I didn't try but read that it has to be SATA.
Is it the same ? In migrating they say hold down the T-key (T for target)
And how come that my 40GB HD which is ATA did migrate (not that I wanted too but still).
Also, this drive ("Current Work") that I want to migrate to the new computer is in my external drive. Can't I just drag it ? If it has only personal data, files and folders I know I can, but It has system (OS X) and applications. It's the one I use and boot on, in my old G4 but I want to transfer Files and folders and settings, so the new computer will know what are my Safari preferences, Automatic fill-in, and perhaps it will move my iTunes music Library too ?
Basically everything except applications. Although I would like my Nikon scanner to be in the new computer as well as the LaCie DVD recorder but I guess I can do that later, separately ?
What are the settings or info I need ? Because if it's just Safari preferences, automatic fill-in and other such small thing, it might be better to just do it again in the new comp and forget about the hassle of migrating.Try getting into Windows and then plugging in the Superdrive. The drive will only be attached to one OS or the other, not both.
-
Hello.
I just purchased a new iMac. He's awesome. However, he didn't come with a Firewire port. (Bummer, because I have one from the last time (2007) I had to transfer stuff from my iBook...)
When I turned him on, he wanted to use Migration Assistant to transfer files from the older iMac; she doesn't have the most updated Migration Assistant, though. (She works just fine, but she only has Snow Leopard.)
Okay, so what I'm wondering is if I just have to use a huge external hardrive to move everything? If I do that, will my programs (Microsoft Office) move? I fear they won't move/transfer that way. Ugh.
PLEASE HELP.
Ideas? Advice?
Thank you in advance!Firewire 800 (what the new iMac has) is 9 pin. FireWire 400 is 6 pin (what your old iMac has). Hopefully you didn't damage your new iMac by trying to insert a FW400 cable into its FW800 connector. The numbers are important in the case of the ports. They don't interchange!!! Get the proper cable or risk damaging your new iMac.
Maybe you are looking for
-
Automatic Deployment Rule - One ADR for Two Different Collection for Two Different time Intervals
I have a scenario where two collection of Windows 8.1 is made based on geographical location. One collection is for all the windows 8.1 machines in India and one collection is for all windows 8.1 machines in US. Now I have created one ADR to be deplo
-
I recently bought a new tower with windows 8.1 everything was fine until yesterday when I went to watch a video that someone had posted, the sound was there but the screen was all green everything I try to watch has a green screen, I have gotten rid
-
Wifi is still dropping out after 6.1.2 update
Recently received a new 4s from the apple store due to moisture damage on original 4s which was very much bug free, but this phone has major wifi problems. Basically it does not scan for wifi connections. It drops out all the time, the wifi tab is gr
-
Injecting a watermark on images as they are viewed
We have over 60k .tif images on a Unix server. These images are engineering drawings from A to J size. When an image is selected via IE or Netscape our current proprietary viewer displays the image. We need to watermark each image when displayed or w
-
How much data does google maps use
how much data does google maos use ?