Imac (intel) 2008 24" screen.

Hi there, I bought my imac (intel) in 2008 along with an Applecare plan which I forgot to register (a complete waste! silly me). Can I register it now? The box is still un-opened? Any suggestions?thanks!

In addition to Paul's comments the AppleCare for a MacBook and an iMac are two seperate products. You cannot use an iMac AppleCare coverage on a MacBook or MacBook Pro.
When you get AppleCare the correct product must be purchased and it is wise to register the same day you purchase it.
Sorry you're having troubles, however I'm sure the same thing won't happen again.
Regarding your BF as I mentioned your BF cannot use the iMac AppleCare on his Macbook however you could try to take the iMac AppleCare back to an Apple Store and request a credit if you buy AppleCare for his MacBook Pro. Bring the MBP with you when you do it and they will help you register it in the store. It's really up to the store management if they will allow the exchange but it's worth a try.

Similar Messages

Can I add a iMac G5 screen to my iMac Intel for Dual screening?

I have a new iMac Intel 27" system and it replaced a iMac G5 system. I want to add a second screen to my mac so that I can multi task as I work. Is it possible to use the G5 screen to do this?
If not, what is my best option? Thanks

Only by using a product such as ScreenRecycler, all of which work over a network connection.
(75182)

Using iMac (Intel) as second screen.

Is it possible to easily use an older iMac as a second screen to a new MacBook Pro?
This would obviously save the cost of purchasing a new monitor.
Thanks for any advice/instructions/rulings.

Short answer is no. You need a late 2009 or later iMac to use Target Display Mode Target Display Mode: Frequently Asked Questions (FAQ)
There are software work arounds but they may or may not meet your expectations http://www.screenrecycler.com/ScreenRecycler.html

IMac (early 2008): grey screen with Apple logo and spinning wheel

Hi there,
I have recently had a problem with my iMac - it started with distorted graphics and I booted into Safe Boot to back up all files with the intention of reinstalling OS X (either from original install CDs or from USB drive with Mountain Lion on). Safe Boot got rid of the distorted graphics but as I rebooted to reinstall, the iMac hung on the spinning wheel on a grey screen with the Apple logo.
I have tried (in no particular order) : resetting PRAM and SMC, booting from original install CDs, booting from the self-created Mountain Lion USB stick, booting into Safe Boot again, booting normally, taking out keyboard/mouse and booting normally... the pinwheel either freezes, the iMac reboots itself, or comes up with a screen telling me to reboot due to a problem. If I hold down command-V at startup it always freezes/fails at the same point and there's usually a previous shutdown cause of 3 or -128?!
I don't seem to be able to run the hardware test either from DVD or internet, I can boot into single user mode and the iMac will stay up for hours but I don't know what to look at or what to fix! There are kernel panic logs relating to some of the shutdowns but as I can't view these out of single-user mode I can't attach them to the post but can look & reply on another machine.
It's an early 2008 iMac, 24" screen, running OS X 10.8.2 - I'd appreciate any help and will try to provide any extra information anyone needs (that I can glean from single user mode, anyway!)
Kind regards,
Carly

I've looked at that, I did try to link the discussion to the article but it failed too Thank you though.
I just created an Ubuntu DVD to run - the graphics are distorted on that too so I'm guessing it's a fault with the graphics card. I don't have the knowledge to confirm/deny it so a trip to an Apple Store is probably in order?

IMac early 2008 occasional screen flicker with external monitor

I am experiencing flickering with my early 2008 iMac when driving an external monitor. My Thinkpad is flawless when pushing out to the monitor.
It will be fine, but occassionaly (every 5-20seconds) the screen gives a little flicker, about 1/4 of a second in duration.
Also, sometimes, there is no flickering, it depends on what is being displayed, which makes me think video card. I am using the 2400XT and my software is up to date.
ROM Revision: 113-B2250H-259
EFI Driver Version: 01.00.259
I am thinking about trying to source a 2600pro that came on the more high end version of my iMac and swap out the graphics card. I also want to drop a 2TB hdd in it, so I figure I might as well kill 2 birds with one stone, or kill 1 iMac with 2 simutaneous upgrades if I am unlucky! (o_O)

iMacs are not designed to have the graphics cards upgraded. If your old card is bad and you feel competent to exchange it for the same one that's really your only GPU option. Apple never said the iMac GPU's were upgradeable and frankly I've never heard of anyone successfully upgrading an iMac GPU.
As far as the adaptor well you could bring your system into an Apple Store and have it checked out by a Genius, it's a free service. I don't know how to make a reservation in Japan but I'm sure you can from the Japanese Apple site. The link in the US is:
http://www.apple.com/buy/locator/service/
I'm providing that so you can look for something equivalent.

24" Imac intel G5 outer screen scratched

Just wanted to know if the outer screen of the LCD can be replaced? I accidently scratched it with a metal ruler and now I have a 4" scratch (grove) on the screen.
Thanks

FYI, an Intel-based iMac is NOT a G5. The G5 is a PowerPC based processor.

IMac (Early 2008 Model) Screen Greys Out And Then Must Reboot

The iMac that we bought back in the summer of 2008 has been having issues over the past couple days. I was using Safari yesterday and then a grey "box" filled the screen and then told me to shut down the computer (by holding down the power button) and then restart it. I did that and I was back on my way. Then a few other people used the iMac (on their own accounts using Safari and iMovie) and had no problems. Just an hour ago I was exporting a video in iMovie and was using Safari at the same tiime and the screen greyed out again. I restarted it and this time I got 3 beeps with a 5 second pause in between over and over again while the screen was black. I held down the power button and it turned off; I waited a few minutes and turned it back on and now its working again. Any idea what's going on? I upgraded the RAM and upgraded to Lion last month. I have not reset the PRAM yet, I would like to know what the problem is and why this keeps randomly happening to what seems to only be my user account.

I've looked at that, I did try to link the discussion to the article but it failed too Thank you though.
I just created an Ubuntu DVD to run - the graphics are distorted on that too so I'm guessing it's a fault with the graphics card. I don't have the knowledge to confirm/deny it so a trip to an Apple Store is probably in order?

IMac (intel) Mountain Lion screen blank

My iMac screen has blanked (black). Currently showing "Loading Photos..." which happens when it goes into screen saver mode. I have tried pulling the plug and restarting to no avail. My previous iMac G5 failed in a very similar way and had to be replaced. Is this the same problem ie. design fault of vital components?

Further to my initial question above: I have been pressing random keys and found that F9 brings the display back but as soon as I try to click on anything it reverts back to black with the timer twirling. Any ideas?

Can you purchase memory for iMac intel 2008

I want to add memory to my iMac (20 inch Early 2008) but apple store online says no memory available for this model. Is that it? Do I have to purchase a new computer to get more memory?

You will find memory modules for your computer at OWC and DataMem for less than Apple charges for memory. You don't have to buy a new computer for more memory. You can install:
Maximum Memory
6.0 GB (Actual) 4.0 GB (Apple)
Memory Slots
2 - 200-pin PC2-6400 (800MHz) DDR2 SO-DIMMs
The largest module you can install is 4 GBs.

Late 2009 iMac intel partially black screen graphics help?

I have a late 2009 27 inch imac which started to get this issue:- webpages will have black where images should be, open window boxes will be black, drop down menu's either black or multicoloured and can't be read, mouse over icons on dock makes them black, text documents is all black- however the wallpaper is normal and borders of the webpages etc...
Booted using the apple hardware test cd- short test and long result resulted in no hardware issues however only long test fixes the black issue for a day before it returns again.
What is the issue, do i need to replace the graphics card. I believe there is alot of dust inside so could this be the issue? I also installed the smc fancontroll and set speeds of around 2000rpm with average temps under 55'c. Before smc speeds were default to 1000 rpm and temp highest was 60'c.
I have also tried switch on imac when fully cold, but straight away the issue is present even though temp is low of 30'c. so far the only fix is to long test using the apple hardware test cd.
Please give informed help as i am pretty useless with regards to programs etc..having been a pc user before this imac.
incidently the graphics card is ati Radeon HD 4850 512 MB.

Un-install Trusteer. Known trouble maker.
Trusteer Rapport Uninstall
Activity Monitor - Mavericks
Activity Monitor in Mavericks has significant changes
Performance Guide
Why is my computer slow
Why your Mac runs slower than it should
Slow Mac After Mavericks
Things you can do to resolve slowdowns see post by Kappy

Intel Imac stuck at white screen and 3 beeps sound continously....

Intel Imac stuck at white screen and 3 beeps sound continously when power on. Pls help......

Well Barry, as for the Ram, all this while are install by apple technician since very day i bought iMac on july 2008. Just wondering What's actually went wrong..
Very first day I bought iMac, few days later, system cant even on. AppleCare Centre exchanged a new set of iMac.
two weeks later, i notice several dead pixels appearing on screen, call to log a case with them, later on, they changed a new panel.
After several months pass, been using happily with iMac... but since now, this problem occurs. So fastrating... My third time encounters problem with iMac. sign
Any suggestion? If not, I guess i have to bring this bulky iMac to applecare centre again. sign

I have an iMac G5 isight (20" screen) Leopard OS 10.5.8 I do not have an intel chip. I am unable to open movie links on facebook using Adobe flash player. I called Adobe Systems and they said Adobe no longer supported computers that did not have intel chi

I have an iMac G5 (20 inch screen) i sight (no intel chip).Leopard OS 10.5.8. Recently I went on Facebook and tried to open a movie site someone had sent me on Facebook andwhen I tried to open the video on Facebook, I was told I had to upgrade my Adobe Flash Player. i tried to do this, but turns out that Facebook is requiring folks to have an intel chip in order to view movies...this is outrageous! Just think of all the folks in the world who have great running pre intel chip Apple computers. I called the Adobe Help line and was told that I really needed to buy a new computer....no thanks. How do I find a way to get a new version of Adobe for Facebook and youtube. I wish Apple could develop a way to have intel chips installed in the older computers. If you have any suggestions on this please let me know.
Thanks, Sarah

Either get a screen cleaning cloth, or carefully us a slightly damp lint-free cloth and dry off with a dry link-=free cloth.
As to Flash Videos: I am in a similar same boat. I cannot watch flash videos on the BBC website or on BBC iPlayer, although all other flash videos (YouTube and FaceBook for example) are fine.
For reasons that passeth all understanding, they work with the PPC version of Firefox, called TenFourFoxG5.app, once you have anabled plug-ins, as it does not natively support Flash.
You can download TenFourFoxG5 from here:
http://www.floodgap.com/software/tenfourfox/
Now for the intersting bit: TenFourFox, like Firefox, does not support most plug-ins. Unless you are prone to headaches (in which case don't) you can read about that here:
http://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
But there is a workaround!
Open TenFourFox and type in the address bar: about:config (no spaces) and click return. This gives you a warning that it might harm the application. Ignore that and click on 'I'll be careful, I promise' and you get the config file that you can edit - with great care.
Look/search (scroll down) for: tenfourfox.plugins.enabled
Set it to true. (Double click it to toggle it)
Now close TenFourFox, open it again, and Flash will now work, as it now uses the plug-ins that Safari has stored.
I am using Flash 10.1.102.64 in TenFourFox and it works just fine.

I am puzzled by iMac(Intel ?). I am running an iMac 24 and use Mac:Office 2008. After having downloaded my Os X LION upgrade, I am suddenly unable to SAVE (and thus alter) my Excel quotations. This is a major issue for a salesman. Can anybody help me

I am puzzled by the meaning of iMac (Intel) as I use an iMac 2 period. I am running Mac : Office 2004 and do all my quotations in Excel. After upgrading to OS X LION, I am suddenly unable to SAVE my spreadsheets. As a salesman whose quotations need frequent updating, my situation is perilous to say the least. Can anyone help me ?

Office for Mac 2004 is NOT compatible with Lion. It must be upgraded to Office for Mac 2008 or 2011, once you have upgraded the files will be accessable. Office for Mac 2004 is written for old PPC (Power PC) based machines. Beginning with Lion support for PPC based apps has been dropped.

Screen Glitch - no start up - imac - intel - 10.7.3

Processor 3.06 GHz Intel Core 2 Duo
Memory 4 GB 800 MHz DDR2 SDRAM
Graphics NVIDIA GeForce 8800 GS 512 MB
Serial Number 74******3F9
Software Mac OS X Lion 10.7.3 (11D50b)
Hello,
several months ago my imac overheated and the screen started to flicker. It was not a particularly hot day but two or three weeks previously the computer had been transported by car for a few hours - it was wrapped up in a blanket. It had been working fine for the few weeks between the move and the overheating.
I have only now got round to dealing with it.
The machine will not start up. There is a repeated pattern covering the entire screen that looks like little bats - yes, bats, flying bats, they are small and yellow. It goes to the grey apple icon and a grey dial spins for a while and then stops spinning and then sometimes the screen goes to a bacl and white flickering mode where the bottom three quarters of the screen are black and the upper part is white and it flickers up and down a bit.
I can boot into safe mode but the screen problem still occurs. I have put a video of this on youtube here.
I have tried booting from a disk warrior disk but it does not go anywhere - the machine crashes. I am unsure exactly what the problem is, whether it is hardware or software. I got it to boot up once - not fully, but to a dialog box that said something about the computer crashing and when I clicked okay it went to the black and white flickering screen. But when the diealog box was open there was no problem with the screen - or at least I could not see one - the background was entirely blue with only a small dialog box in the middle.
If anyone has any suggestions I would be very grateful. Also, if there is any other information that you might need then please ask.
Thank you for your help in advance.
Adam.
<Edited By Host>

First, which iMac? Second, contact Apple Service, iMac Service or Apple's Express Lane. Do note that if you have AppleCare's protection plan and you're within 50 miles (80 KM) of an Apple repair station, you're eligible for onsite repair since yours is a desktop machine. Might also apply to new machines the first 90 days. BTW, the AppleCare Protection Plan's the best insurance policy available for desktop machines. Get it if you don't have it before contacting Apple.

IMac Intel with Parallels, Two Monitors and Screen Spanning

Hi,
Longtime Mac user forced into using Windows XP for my business. I have an iMac G5 2.1 (iSight) PowerPC. I need two monitors with screen spanning so I'm thinking of getting an iMac Intel, running Bootcamp or Parallels with XP Pro, and using a screen-spanning program.
1. Can I run Windows XP on the Intel Mac and use screen spanning with a PowerPC iMac?
2. Is it better to load the screen-spanning software on the XP or Mac system?
Thanks! Any help appreciated.

Hi and welcome to Discussions,
if nobody answers your questions it could also be that nobody has tried it yet.
I haven't tried this setup yet, so forgive me for fishing in muddy water.
Windows XP is capable of using two (or depending on the graphics card even more) monitors for duplicating or spanning.
My own two Intel Macs are showing me this opportunity in the preferences.
Since I never had the need to do so I have never attached a second monitor.
The Intel iMacs and MacPros are capable of attacing second monitors however with the iMacs you a adapter which you can get from Apple.
I would suggest (if possible) to go the nearest Apple Store and try to convince the guys there to do such a setup for you to verify that it works.
Good Luck
Stefan

Imac (intel) 2008 24" screen.

Similar Messages

Maybe you are looking for