IMac Intel and CS2 using RAW

Does anyone have problems working with RAW images on CS2 and the iMac Intel machine?
Everytime I try to convert an image from RAW to TIFF ( in Bridge ) and then open in CS2 I get a window saying that it cannot open due to an error.
Any help or comment is welcome.
Thanks
Pedro

Problem solved.
I re-installed Photoshop CS2 and the problem is gone.
Why it didn't work the first time, I don't know, although after finishing the installation it showed a window saying that the installation was successful....
Pedro

Similar Messages

I am running on OSX 10.10.1 and have a 2009 imac intel and I am having severe latency issues. I am not familiar with macs as this is my home computer used by other family members. Any help on how to troubleshoot why such latency issues?

I am running on OSX 10.10.1 and have a 2009 imac intel and I am having severe latency issues. I am not familiar with macs as this is my home computer used by other family members. Any help on how to troubleshoot why such latency issues?

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

IMac Intel and WinXP - Sharing Files Problem

Hi there,
I want to be able to retrieve my files from my Windows XP Pro SP2 computer to my iMac Intel. Both currently are connected via a NetGear Router and have an internet connection (satellite modem). I use the installed Apple Airport Express card.
Problem is that I can't get either computer to see the other; however, I can successfully ping each one from the other one. There is no data loss, no delays. They are connected via ethernet cable from the satellite modem to the router, then from the WinXP computer to a different port on the router. Neither ethernet cable goes into the iMac.
Therefore, as I know that the IP addresses seem to be correct, what else needs to be done here? I was speaking with an Apple rep on the phone who suggested taking one ethernet cable and remove it from the router and connect it direct to the iMac and run it to the XP. Problem is that now the XP computer has no internet connection. So, I have reversed it back in order that both computers can access the internet. (I caught them at their closing time apparently as the agent wasn't on the line when I went back on to report that I had changed the cable over...)
When I select Go and then Connect to Server Settings, after about 1 minute I finally get an error message from the AFP server connection stating: "Connection Failed. The server may not exist or it is not operational at this time. Check the server name or IP address and try again. OK."
I have disabled the firewall on the XP computer. I also removed the antispyware, the main firewall software and the antivirus software. (These are all from Freedom Software [now called ZeroKnowledge I believe].) I then reverted to the Windows Firewall and did some more tests. Nothing changed.The only difference here between this firewall being enabled and disabled is the speed with which the error message appears. If the Windows Firewall is DISabled then it takes about 2 seconds for this message to appear. If ENabled then about 1 min.
So. Any suggestions on how I can get each computer to recognise the other? I would appreciate any suggestions here. Perhaps I've missed installing something or completing a step? According to Apple I have all I need at least for the iMac. As to the XP stuff I believe it is all fine...
I'm new to all things Mac so details might be helpful for me.
Thanks so much in advance.
iMac Dual Intel 20" Mac OS X (10.4.6) 1 GB RAM, NetGear Router WGR614v6
iMac Dual Intel 20" Mac OS X (10.4.6) 1 GB RAM, NetGear Router WGR614v6.

So is the router negotiating the connection with PPPoE for your local network giving you one external IP address and then using DHCP to negotiate local connections for your two computers or are each of the two computers negotiating their own connection with PPPoE giving them each separate external IP addresses?
This info from Apple may be useful to you;
http://www.apple.com/switch/howto/network.html

IMac Intel and Aperture 1.1.1

When I install Aperture 1.1 on OSX 10.4.6 and my iMac intel with 2G0 of RAM, Aperture is'nt running and if I reboot my iMac the machine no-starting (the clock is turning continualy).
After a new installation of OS X and the patch 1.1.1 of Aperture, Aperture is running.
But Aperture stop after few minutes (10 or 30, ....)!
I search a solution

Bonjour. I also have an Intel iMac with 2Gb and it works fine. I'm not sure why you have a problem, but have you tried reparing your permissions via Disk Utility.
If you have anti-virus, was this disabled during the install, as that may have impacted a smooth install.
I'm new to Mac's myself, but hope the above is useful. I can confirm Aperture 1.1.1 works on your hardware combination.
Merci beaucoup.

IMac Intel and Classic

Hello everybody! Do you know Classic works with iMac Intel?. I'd like to know 'cause I have many information and programs based on Classic and when I bought my iMac Intel, the Install Classic Cd doesn't exisit.
What can I do?
Thank you so much!
iMac Intel Core Duo 20" 2Ghz 1GB SDRAM, 250 GB hard disk Mac OS X (10.4.4) 1GB SDRAM, 250 GB hard disk

Hello everybody! I was talking with a friend that works for Macromedia. Cindy, your answer is perfect. Solution: I have to buy a Powerpc machine to use all my documents only works with Classic. Thank you!

I am using iCal on my iMac, iPad and iPhone using iCloud and when I set the alert for 1 day before and the second alert to 1 hr before, then save the alerts switched. Was is this happening?

I am using iCal on my iMac, iPad and iPhone and when I set the alert for 1 day before and the second alert to 1 hr before, then save the alerts switched. Was is this happening?

http://support.apple.com/kb/he57?viewlocale=de_de
India
(91) 1800 4250 744
www.apple.com/in/support/
hope it helps

IMac Intel and Office

Is anyone having problems after installing Office 2004 on their IMac Intel? After slowing other applications down quite a bit, my IMac froze so I had to restart. Then, I got stuck on the intro gray screen with spinning gear. Called support and they advised me to perform Erase and Install. After Erase and Install, I started experiencing same problem symptoms. Now, I am unable to boot up and unable to get to my desktop! Called support and they said to do ANOTHER Erase and Install!!
IMac Intel 17" Mac OS X (10.4.4)

Thanks for the response! Did you do a Basic Insall when installing Office? I did a custom because I did not want to install MSN Messenger. Also, do you notice any slow down of other applications? I tried opening iMovie after installing Office, and I got the dreading spinning color wheel of death. Even basic tasks like opening a new Finder window would cause me to freeze up.
Right now, I'm stuck between Apple Care telling me to call Microsoft because it's a "third party software issue" and Microsoft telling me it's a hardware issue.
IMac Intel 17" Mac OS X (10.4.4)

Problems sharing screen w/ iMac Intel and macbook

'm new to networking, so I hope someone can lead me in the right direction. I have a new iMac Intel running Leopard. I also have a MacBook2,1 running Tiger. They both are on my Airport Extreme network.
I can screen share from my iMac to my MacBook, but not the other way around. When I try to access my iMac from my MacBook I get the dreaded beachball for about a minute then it won't connect. I have "file sharing" and "screen sharing" enabled in my system prefs on my iMac.
Am I missing something here?

I have a similar problem. I screen share with my friend who's across the Atlantic ocean. We both have Macbooks (mine is a Pro).
I can share my screen to his account but not the other way around. The option to share his screen is always grayed out. HOWEVER, if he quits his account and logs into say the "Guest" account, all of a sudden I can share his screen.
All the Sys Prefs options are the same for both accounts, so I have no idea why this is happening. We both upgraded our previous Tiger installations so I'm not sure why his is causing so much trouble.
Last thing: last nite I was able to share his screen but NOT by click on the little icon at the bottom of iChat. A totally different, long horizontal bar showed up on the screen asking me to choose either sharing my screen or his. If anyone can point me back to that option, I would appreciate it because it was the only thing that actually did work.

Bootable clones for both iMac (Intel) and G5 (PPC) on same external drive??

Is it possible to format and partition one external firewire drive to accept a bootable clone of my iMac (Intel) on one partition and my G5 (PPC) on the other? I seem to remember that in order to be able to boot, the Intel and the PPC require something different in formatting on the drive.
If this is not possible, could I as a second choice format/partition an external firewire drive to place a bootable clone of the G5 on one partition and a Time Machine backup of the iMac on the other? I am looking for a way to store just one rather than two drives in my safety deposit box. Thanks

I put up instructions and a picture showing how to select the partition scheme:
http://www.pinkmutant.com/articles/Leopard/leobugs.html
Scroll down to about the middle of the page.
Frankly I was surprised to find out you can boot an Intel machine from a drive that is APM rather than GUID. I'm not sure that what you want to do is going to be as easy as one would hope. Anyway, the instructions I found for dual booting off a firewire drive sounded a bit complex!
Francine
Francine
Schwieder

Imac intel and Airport etreme

I have a dual core imac and am running a thomson speedtouch router. My ichat video has never worked and the nice bloke at apple in India tells me that I need an airport extreme for it to work. If I buy one, do i plug it into the speedtouch or do i throw it away and just use the extreme..?
Thanks

You shouldn't have to acquire an additional router, like the AirPort Extreme Base Station. Most likely your existing Thomson router should be able to have it's ports configured to allow for iChat sessions. The following Apple Article shows which ports are necessary for iChat.

Intel and CS2

I am having a problem installing a legit copy of Adobe CS2 on my iMac. The installation seems to run very fast (too fast), but when I go into my applications folder, no adobe apps can be found. I have tried running the installer multiple times and have managed to correctly install bridge and photoshop once, but nothing else. I am sure it is a full version and that it is a mac version. any help would be appreciated.
thank you

Same problem when I called Apple, I had to ask for a level 2 tech right away since the first person had no idea what I was talking about when I said I wanted to uninstall the recent 2006-003 update and her accent was very difficult to understand since I have a slight hearing problem.
Anyways, I am new to Mac computers, I am a long time Windows and Unix Admin, and multiple flavors of Linux for certain services. We were told we had to buy these Imac machines because we were bought out and the new company said we had to use macs, because everyon that does printing uses macs, I begged not to get the intels because of having to use Rosetta, but they would not listen, I almost quit over the ordeal since I was basically threatened and told to keep my mouth shut.
Regardless of all that, I am the one working countless overtime to get these Imacs working again. I ran into the problem when I did the 2006-003 security update. I tried an archive install which would not even finish, kept hanging on iweb. So I did an erase install, then installed Indesign CS2, and did not install the version cue, since I was already aware this was a problem. I then started updates one at a time, and tried created a PDF after a restart after each install. I did the quicktime install 7.1 first, worked no problem, and could make PDF's still, I did the 10.4.6 update and rebooted tried to make a pdf with acrobat and system hung. Restart in safe mode and remove the cache from library\caches\ and then reboot and as soon as I open acrobat the system hangs. Everytime I remove the cache I can then reboot normally until I open Acrobat.
I have noticed in my short time with Apple, that when something does not work, all I hear is that "well that isnt our problem, you should call adobe" or whoever the other program is. The plain simple fact, is that adobe is not the only program having problems, apple remote desktop is also having problems, and safari, and others, just search the message boards and you will see, but Apple refuses to resolve the issue, but if you dont install the update, then your system is open to security problems.
The fact that I can not just uninstall a secuirty update is unbeleiveable. The Apple level 2 tech told me that MOST updates including all security updates could not be uninstalled, you either had to archive or erase install the system to go back.
I think the Apple OS is great, but they should test products with their largest vender, Apple before putting out these intel Imacs, or security updates that cause problems. If Windows did this, Man everyone would blame Microsoft right away, but if it is apple, you end up with a apple community that is so defensive they will just say, well its not our fault its the program. Well guess what, a system without any programs is not very useful.
This whole mindset that I get from the other plants that windows crashes and I hear them joke about the blue screen of death and garbage like that is rediculus. I havent seen a blue screen since windows 98, until after the apple update that gave me the blue screen, and all the talk about how insecure the windows machines are. They are only insecure if an admin doesnt do his job. If he allows users to be administrators or doesnt do any updates for 6 months. I have numerous windows machines on this network and they run flawless, no virus, no spyware, no problems. 5 Windows servers, and 25 linux boxes running as thin clients booting to a windows XP remote desktop. I have had to tell people how to restart their computer since they forget and leave them running constantly, of course, I network boot them and restart for needed updates, but they forget how, because XP is solid.
So, sorry for the rant, but basically this is not acceptable for Apple. They need to fix their product and take responsiblity for problems, if they want to gain market shares above what they have, they will run into the same problems as microsoft, and they will be forced to make there machines run with certain required programs.
So, does anyone have a fix for this problem, besides dont use acrobat or dont install updates?

Deleted Garageband off my 2007 iMac Intel and no longer have the original reinstallation disk and I don't wan't to buy Garageband again. Is there any way to get it back for free?

Any help? I wouldn't mind any links to where I can install Garageband for free even if it's not from Apple. (Currently running Mac OS X 10.5.8 and will be updating the software tomorrow on February 13th to Snow Leapord 10.6)

If you don't want to purchase the latest version, you have to call Apple to get replacement DVDs for the iMac > http://support.apple.com/kb/HE57
When you receive the discs, just insert the Mac OS X Install Disc 2 and install GarageBand.
If you have a Time Machine backup, you can use it to restore GarageBand. First, open Finder and select Applications on the sidebar. Then, open Time Machine app and navigate through your backups to restore the application

Intel and g5 using Qmaster

I have been trying to add my macbook pro to my Quad g5 cluster
I've even tried it the other way around. The just don't seam to want to co exist. I just get the beach ball of death.
Has anyone been able to have the 2 machines work together.
I have also tried quick cluster but with no success.

You might want to check on the following:
1. Make sure all the computers have their "Firewall" turned OFF.
2. Stop all services and "Reset Services".
3. Repair Disk Permissions and try sharing them again.
4. Make sure they are both of the same version.
6. Make sure that they are both of the same "subnet".
Hope that helps.
Cheers!

I have an iMac intel and it will not boot up, the loading icon just keeps turning!

I've tried all the usual remedies but to no avail. Can anyone help please.

Don't know what the usual remedies might be. Help us help you.

Using Time Machine to backup a iMac G5 and restore to an intel iMac

Is it possible to use Time Machine to backup my iMac G5 and restore my backup to a new intel iMac?
The reason being is that I my mother-in-law's company bought her a new intel Mac and she wants to trade with me since she only uses her Mac for e-mail, photos and accounting software.
I was thinking of making sure her data is preserved by using the migration assistant to transfer her data to my iMac G5 and then using my time machine backup to restore to her intel iMac. I have concerns about this method after reading about the intel/powerpc issues with time machine. I also have concerns that perhaps the version of MacOS 10.5 installed to my iMac G5 will not be optimized for intel.

Well, not entirely. You cannot install or restore a PPC version of OS X to an Intel Mac because the PPC system will not work on an Intel Mac. You can copy your personal files, most preference files, and third-party applications (although it would be preferable to update all PPC-only apps to universal binaries which perform better on Intel machines.
Another possible concern is if your mother's company is transferring the ownership to her or simply purchasing the unit for her to use. In the latter case the computer belongs to the company, not your mother. She cannot then give it to you because it isn't hers. This problem should be resolved beforehand because the company may one day want the computer back.
Folders You Can Move to Your new Mac
From the Home folder copy the contents of Documents, Movies, Music, Pictures, and Sites.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder)
/Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder)
/Home/Library/Mail (copy the whole folder)
/Home/Library/Preferences/ (copy the whole folder)
/Home /Library/iTunes (copy the whole folder)
/Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist
/Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data
Also in /Home/Library/Preferences/Microsoft
For FireFox:
/Home/Library/Applications Support/FireFox
/Home/Library/Preferences/org.mozilla.firefox.plist
Credit goes to another forum user for this information.

IMac Intel and CS2 using RAW

Similar Messages

Maybe you are looking for