IMac Intel can't see blank DVD

I had this problem (still do) with a homemade DVD movie; now when I insert a brand new blank TDK DVD-R disk it's invisible on the desktop and the finder

I've fixed this by going to System Prefs>CDs & DVDs and changing the WhenYou Insert A Blank DVD pull-down to Open Finder

Similar Messages

[CLOSED] Burning tools can't see blank DVD discs

Hello.
Something strange is happening lately. Burning apps can't see blank discs. It doesn't matter if I have cdrkit or cdrtools installed - neither works.
Graveman hangs on start when blank DVD is in tray.
Brasero doesn't see my device and allow only to create ISO images.
cdrecord -minfo fails, with empty DVD-R present in tray:
sudo cdrecord -minfo
Password:
Cdrecord-ProDVD-ProBD-Clone 3.00 (i686-pc-linux-gnu) Copyright (C) 1995-2010 Jörg Schilling
Linux sg driver version: 3.5.34
Using libscg version 'schily-0.9'.
No target specified, trying to find one...
Using dev=0,0,0.
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'MATSHITA'
Identifikation : 'DVD-RAM UJ-860S '
Revision : '1.00'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO
cdrecord: Warning: Cannot read drive buffer.
cdrecord: Warning: The DMA speed test has been skipped.
cdrecord: Cannot load media.
I'm in optical group and . Thunar successfully mounts DVD with written content and cdrecord -minfo also gives me information about present media when it's not empty.
Is there anything I can do?
Last edited by weakhead (2010-07-23 14:20:26)

@mianka
weakhead wrote:[...] Thunar successfully mounts DVD [...]
It's supposed to be in kernel, right? Besides, it was never necessary for me to install external driver, months ago burning DVD discs with tools using cdrkit/cdrtools/dvd+rw-tools wasn't a problem.
I even though that lack of libdvdread package was causing this... but having it installed doesn't help either (as expected - it's just for DVD-Video discs).
EDIT: I've also tried dvd+rw-mediainfo /dev/sr0 - doesn't work.
cdrecord have no problems recognizing empty CD-R medium, so it's happening with DVD discs only.
Last edited by weakhead (2010-07-18 14:35:13)

TOSHIBA DVD-ROM SD-R2312 can't see blank DVD - HELP!

HI all - I have a TOSHIBA DVD-ROM SD-R2312. It reads and plays CDs and DVDs but I'm trying to burn a video onto a DVD and when I place the blank DVD R into it to burn, I get a "Please insert media" message. The DVD-R that I'm putting in is brand new so there shouldn't be any problem there. It's driving me nuts!! It may well be that this is simply not a DVD burner - I may just be that stupid. If not, is there any way to fix this problem?
MANY THANKS!
Solved!
Go to Solution.

madmen wrote:
HI all - I have a TOSHIBA DVD-ROM SD-R2312. It reads and plays CDs and DVDs but I'm trying to burn a video onto a DVD and when I place the blank DVD R into it to burn, I get a "Please insert media" message. The DVD-R that I'm putting in is brand new so there shouldn't be any problem there. It's driving me nuts!! It may well be that this is simply not a DVD burner - I may just be that stupid. If not, is there any way to fix this problem?
MANY THANKS!
The SD-R2312 can read and write CDs, but it can only read DVDs. It has no capability to write a DVD.
http://www.netcomdirect.com/tossd10atnot.html

My iMac will not recognize a blank DVD-R that I am trying to burn. It also won't eject unless I "shut down"

My iMac will not recognize a blank DVD-R that I am trying to burn. It also won't eject unless I "shut down" and restart while holding down the mouse button. Anyone have any remedies?

I ran into a similar (identical?) problem. I inserted a DVD-R and my imac would not recognize it. The only way to eject was to do a restart. I tried some of the SMC reset stuff. That didn't work. I came across another thread on macrumors (http://forums.macrumors.com/showthread.php?t=336501)
that solved my problem.
I have an external Western Digital Passport drive that I use for timecapsule. It turns out
there are two files that WD adds to the /Library/LaunchDaemons that interferes with the
SuperDrive. I removed the WD files from the LaunchDaemons directory and everything works fine
now. Again, refer to the macrumors thread for more details.
The files I removed from the LaunchDaemons directory were:
com.wdc.WDDMservice.plist
com.wdc.WDSmartWareServer.plist
..yes I had installed the WD backup software to see if I liked it....I did not, but didn't realize this files would cause a conflict with the SuperDrive.

Y ? i can not see my DVD drive in favorites, on the left side. TQ.

y ? i can not see my DVD drive in favorites, on the left side.
TQ.

On the left side of what, the Finder?
Open Finder Preferences, click on Sidebar and see if CDs & DVDs is selected under devices.

I can not see some dvd films .. couldn t open dvd films..

i can not see some dvd films .. couldn t open dvd films..

so you inserted dvd and couldn t open them .. got to be more specific .. which films, what else is happening ..

[Solved] [Xorg+KMS+Intel] Can't see login console / boot messages!

Hi,
My problem is that using an Intel video card (with KMS) after latest Xorg 1.8 update, I can't see boot messagges and the login console anymore.
I've just noticed that after last Xorg update I can't access anymore to runlevel 3 on boot.
I've got an Intel video card so KMS is enabled by default (and mandatory).
I always used SLiM as a display manager, configured through /etc/inittab to go to runlevel 5 on boot:
# /etc/inittab
# Runlevels:
# 0 Halt
# 1(S) Single-user
# 2 Not used
# 3 Multi-user
# 4 Not used
# 5 X11
# 6 Reboot
## Only one of the following two lines can be uncommented!
# Boot to console
#id:3:initdefault:
# Boot to X11
id:5:initdefault:
rc::sysinit:/etc/rc.sysinit
rs:S1:wait:/etc/rc.single
rm:2345:wait:/etc/rc.multi
rh:06:wait:/etc/rc.shutdown
su:S:wait:/sbin/sulogin -p
# -8 options fixes umlauts problem on login
c1:2345:respawn:/sbin/agetty -8 38400 tty1 linux
c2:2345:respawn:/sbin/agetty -8 38400 tty2 linux
c3:2345:respawn:/sbin/agetty -8 38400 tty3 linux
c4:2345:respawn:/sbin/agetty -8 38400 tty4 linux
c5:2345:respawn:/sbin/agetty -8 38400 tty5 linux
c6:2345:respawn:/sbin/agetty -8 38400 tty6 linux
# Hypervisor Virtual Console for Xen and KVM
#h0:2345:respawn:/sbin/agetty -8 38400 hvc0 linux
ca::ctrlaltdel:/sbin/shutdown -t3 -r now
# Example lines for starting a login manager
#x:5:respawn:/usr/bin/xdm -nodaemon
#x:5:respawn:/usr/sbin/gdm -nodaemon
#x:5:respawn:/usr/bin/kdm -nodaemon
x:5:respawn:/usr/bin/slim >& /dev/null
To enable runlevel 3 at boot, I commented the id:5:initdefault: and the x:5:respawn:/usr/bin/slim >& /dev/null lines and uncommented id:3:initdefault:.
Now, during boot, the last thing I see is Loading UDev modules..., then the screen becomes dark gray and I can't see any other boot messages (actually this appened also before, after xorg update).
The problem is that before slim started but now I can't see any login console.
I also figured out that typing my username, password and then startx, starts X normally, so the problem is just that I can't see the tty console anymore.
Once I am in X I can switch to ttys normally.
What can I do?
I just wanted to get rid of slim and start X automatically after console login but I can't see the console login!
I hope to have been clear enough, thanks for your help!
Last edited by rent0n (2010-07-04 11:36:38)

rent0n wrote:
Well, it seems I spoke too early. It doesn't work as expected at every startup, sometimes I still have the black screen.
Now I'm trying with:
video=SVIDEO-1:d
that seems to work, but I just tested it one time and I'm starting to think that screen blanking happens randomly...
Any hint is more than welcomed.
After a few reboots, I can confirm this workaround seems to work.
This is weird indeed as I don't have any SVIDEO-1 interface listed by xrandr -q, but still.
Screen 0: minimum 320 x 200, current 1280 x 800, maximum 8192 x 8192
VGA1 disconnected (normal left inverted right x axis y axis)
LVDS1 connected 1280x800+0+0 (normal left inverted right x axis y axis) 331mm x 207mm
1280x800 60.0*+
1024x768 60.0
800x600 60.3 56.2
640x480 59.9
TV1 disconnected (normal left inverted right x axis y axis)
The only problem is that now boot lasts a lot of time and, between UDev modules loading and disks checking, I have to wait for at least 30 seconds with a black screen and a central white dash flashing.
Anyone experiencing the same thing?

IMac suddenly can't see any wireless networks!

I have a recurring problem with my iMac 20" Intel Core Duo.
For some reason, it suddenly loses the ability to see wireless networks. The problem is resolved if I restart. I go through this several times each day, and the frequency of the problem is increasing.
Strangely, there is nothing wrong with my Airport Extreme wireless network. My other computers see it just fine.
And when I check the Airport indicator at the upper right-hand side of my iMac's desktop during this problem, it shows NO wireless networks at all! And I have 7 neighbors with wireless networks on 24/7!
As I said above, the solution has been to restart my computer, at which point all the networks appear again.
Can anyone offer a solution/explanation? I have tinkered with my network settings to no avail.
Thanks in advance for any suggestions.
MacBook Pro, iMac 20" Intel Core Duo Mac OS X (10.4.9)

It has to be unrelated because I too have been having the same issue for the past 2 weeks. Actually it seems that ever since I reloaded the last iMac intel update (which I had to do to get my iSight to work again)
I've been having this issue multiple times a day. I even moved my iMac thinking I had too much distance and walls between the router and the iMac.
I know it isn't the router because the laptop in the house picks up a very strong signal all the time.
I tried switching channels on the router (a linksys) and it has seemed to help a bit. I am now down to dropped signals only about every other day.

Can't See Blank CDs

I recently reinstalled OS X on my computer. Now I can no longer see a blank CD when I insert it into my drive. It loads all burned CDs and everything else fine, just won't show me the blank ones so that I can burn a new one.
Any ideas?
Thanks

Sounds like your System Preferences got altered during the reinstall. Open Finder > Preferences... > General, and under "Show these items on the Desktop:", make sure "CDs, DVDs, and iPods" is checked.
If that doesn't solve it, open System Preferences > Hardware > CDs & DVDs, and for "When you insert a blank CD" and "When you insert a blank DVD", select what you want. I selected "Open other application" and browsed to Applications > Utilities > Disk Utility, so when I insert a blank CD or DVD, Disk Utility starts.

DVD RW drive can't recognize blank DVDs

I'm having some difficulties getting my PowerMac Tower DVD RW drive to recognize blank DVDs. I'm able to burn and read CDs with no problems, and I can read DVD movies as well. However, when I insert a blank DVD+R (Memorex DVD+R 8x 4.7GB), the drive spins on and off and after 30s or so, it spits the DVD out with no error. Any idea what the problem is?
System Profiler shows the following info:
SONY DVD RW DW-Q28A:
Firmware Revision: KAS7
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW, +R DL
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No
PowerMac Dual 2.7GHz G5 Mac OS X (10.4.6) 4.5GB RAM

I agree that another media brand is in order. Memorex does not make quality media and this may be the problem.
TDK and Maxell make highly regarded media. Princo is labeled as "3rd class" by the DVD Media FAQ at digitalFAQ.com.
I use TDK almost exclusively and have yet to have a bad burn.

IMac Intel Core Duo: Which Install DVD disks should I be looking for?

I have an iMac Intel Core Duo (2 Ghz, 20") model. This was sent to me from Apple as a replacement for my iMac G5 when it had problems a couple years ago. I just realized today that they did not send me OS install disks for it; I still have the iMac G5 install disks though.
What iMac install disks should be looking for to purchase? Are they specific to an Intel Core Duo? Would any iMac Intel installation disk work?
Thanks in advance.

You may be able to contact Apple and have them provide a replacement set for a nominal fee.
If it's the Core Duo white iMac from +early 2006+, it came with Tiger (10.4). Therefore, you can get install Leopard or the current Snow Leopard on it. You just need the standard retail disc.
Would any iMac Intel installation disk work?
Usually, installation discs that come with Macs (the grey ones) only work with that specific Mac model. A retail disc (the ones that are sold separately) will work with any supported Mac model.
There is another difference. The disc that is included with Macs also have additional bundled apps, such as the iLife suite. The original included disc for your iMac would have iLife '06, which is two versions old, so it may not be that much of a benefit today (iLife '09 is the current version).

I reinstalled lion on my 27in iMac but can't see hard drive.

I reinstalled Lion on my 27in imac, all seems well except I can't see my hard drive. How can I make it visible on the desktop. Thank you to Kappy fo help on the reinstall.

Choose Preferences from the Finder menu and check the boxes in the General tab.
(63348)

Will iMac Intel based computer see Sony DCR-HC96?

Anyone out there had experience downloading image data from the Sony DCR-HC series camcorder to iMovie? I under that a 4-pin to 6-pin firewire connection via Sony's Handycam station is required. Optimally, iMovie should open automatically. I've read some conflicting reports in these forums. Any information would be appreciated. THANKS.
iMac Intel Core Duo. Mac OS X (10.4.8)

Richard Raub,
When you say "image data" are you talking about Photos or Movies.
For photos I imagine a USB connect would be required to transfer the photos.
For video a firewire connection is required.
iMovie should recognize the camcorder connected by firewire and allow you to import the mini DV tape to computer/iMovie.
This is a SD camcorder that shoots 4:3 and has a 16:9 shooting mode(not true widescreen)
http://discussions.apple.com/thread.jspa?threadID=833479&tstart=0
I've never experienced iMovie opening automatically when any type of device was connected to the computer thru any type interface. Maybe other members know of this feature
Are you having problems or is the question just for informational purposes.

URGENT: MBPro Superdrive can't recognize blank DVDs

Hi I have this MacBook Pro (Model version 3,1) purchased last August and I am covered by AppleCare since this July. I currently wanted to burn some data into blank DVD+/-RWs through Toast Titanium, but failed. Sometimes Finder recognizes the existence of a blank DVD inside the drive, but most of the time it just doesn't at all and ejects my blank DVD. In Toast, whenever I tried to burn the data, which is like 4.3GB worth, it "completes" the process at the blink of an eye, which means it didn't burn anything at all.
I've tried multiple DVDs and brands and it just won't work. I have also tried resetting PRAM but to no avail.
This is very annoying since I have to burn the data and mail the DVD out within these 3 days, so it's quite urgent and I didn't expect this to happen since I seldom use the Superdrive and I've been very tender with the slot-loading.
If anyone could help or refer me to a previously-dealt similar case, I would be very glad. Thanks.

Woops! I just realised that my 1st post to this topic didn't get posted so my subsequent one (which is the one listed) doesn't really make sense.....
......anyway, I was probably moaning about the drive with some specifics. Yep, it was cd reading/burning that was the main infuriating problem and had my visit to the genius bar this morning. The guy tested the drive through his operating system and its still didn't work so yes, he said the drive is useless. Only 2 years old and not overused at all but I do have a slight dent on the casing near the drive which may or may not have made any difference. He said to buy an external rather than replacing the internal which I did - a LaCie d2 and have just raced through loads of old music cds which is great and backed up lots of stuff to cd which is great too. And its fast.
More money I know but couldn't stand the frustration anymore and its a result and no more time wasting.

DVD Burner does not see blank DVD disc.

And another thing! When I insert a blank DVD (16X) to burn a disc, my PB G4 doesn't seem to recognize it, no icon comes up on the desktop, and it gets spat out.
What's going on here? a new laptop in the offing? I hope not.

Hi Simon,
Yes, it only suffers indigestion with this one blank DVD disc, so much so, that no icon is created on the desktop and the disc gets thrown out. Haven't tried throwing in a blank CD. Will try one as soon as I'm back home again.
Thanks for your reply.
Arnel

IMac Intel can't see blank DVD

Similar Messages

Maybe you are looking for