IMAC Intel Early 2009 and iphoto

Hope you can help me. I have an early 2009 iMac desktop with these specs
20 inch
OSX 10.9.4
2.66 GHz Intel Core 2 Duo
8GB 1067 MHz DDR3 (I believe I upgraded this to 8 gb)
I have the iphoto program that came with the mac, version 8.1.2
I would like to update to a newer version of iPhoto so that perhaps the photo stream would go to the iMac. Also need to spend some time organizing thousands of photo files so I'd like to be in the latest version.
Problem is that the latest (free?) iphoto has bad reviews. Am I better off not updating at this point? I thought you have to pay for iPhoto? Is the free iPhoto just an app for iPad? I don't see full version. Should I update to a later operating system?
I hesitate to update because older machines don't always work well with new releases. I appreciate any feedback / pros/ cons you can share. Thanks.

Problem is that the latest (free?) iphoto has bad reviews.
The latest iPhoto, 9.6, works fine. Listening to the few bad reviews (out of litterally millions of users) is like judging the health of a city by what you see in one of its hospital's emergency rooms. Remember those having problems are more likely to post than those who are rolling along without a problem.
Your model iMac, Mac9,1, can run Yosemite which is a free upgrade. You'll have no memory problems with what you have. However, since you are currently running iPhoto 8.1.2, iPhoto 9.6 will require a purchase from the App Store.
If you don't want to upgrade to Yosemite and want to upgrade to iPhoto 9 you'll need to purchase a copy of the iLife 11 disk from a 3rd party retailer like Amazon.com or eBay.com. They Yosemite route will be less costly.
What every you do prepare your Mac for any upgrade and always have a backup before embarking on such an upgrade.
By the way, as part of preparing or even in you continue with Mavericks I would download and apply the OS X Mavericks 10.9.5 Update (Combo) updater. Be sure to repair disk permissions before upgrading the system and after.

Similar Messages

IMac 20" early 2009. Windows 7 x64. "Boot Camp x64 is unsupported on this computer model"

Dear all,
I just install windows 7 x64 in my iMac 20" early 2009. But I have a problem with the installation of the drivers of bootcamp in windows 7.
iMac 20" early 2009
Processor 2,66 GHz Intel Core 2 Duo
Graphics NVIDIA GeForce 9400 256 MB
Software OS X 10.8.4 (12E55)
I already tried:
Mac OS X v10.6: equipos Mac que utilizan el kernel de 64 bits
http://support.apple.com/kb/HT3770?viewlocale=es_ES
OS X: Cómo iniciar el equipo con el kernel de 32 bits o de 64 bits
http://support.apple.com/kb/HT3773?viewlocale=es_ES
Boot Camp: System requirements for Microsoft Windows operating systems
http://support.apple.com/kb/HT5634
I check this also and try with this bootcamp
Mac model
Windows 8, 64-bit
Windows 7, 64-bit
Windows 7, 32-bit
Windows Vista, 64-bit
Windows Vista, 32-bit
Windows XP, 32-bit
iMac (20-inch, Early 2009)
4
4
4
But I can't find a solution. Any suggestion?

If you can grab Boot Camp 3.0 thru 3.x you should be able to get the drivers you need.
Apple took more agressive steps to really lock out and lock down drivers from being used and installed on systems that did not fall under the guide of 'supported'.
So if you have 10.6 DVD that does have Boot Camp 3.0 on it and you would need to update to 3.2, which use to be posted for manual download (so could do so even from Windows) if not thru the Apple Software Update utility in Windows.
If you can find a more "no we won't allow you to" I have never seen it.
And Google as best you can.

I have just installed a new hard drive in my imac intel 20" (2006) and now the hard drive does not show up in the 'select destinations' folder of the install program.

I have just installed a new hard drive in my imac intel 20" (2006) and upgraded the memory and now the hard drive does not show up in the 'select destinations' folder of the install program. I can see the hard drive in the disk utilities window however it wont let me do anything.
It is a seagate 1TB SATA II drive however it is displaying it as a 7.3 TB.
If anyone has any suggestions I would be happy to hear them.
I have tried to erase and partition and get the same error message each time, 'Input/Output error'.
I have tried starting the thing with the install disk which is Mac OS X (Tiger?) which came with the computer. No good.
Anyone?

Thats correct. I can see it in the list however when I attempt to erase it or partition it it's like it's not being found or recognised and it throws up the input/output error message. I am pretty sure that the sensor it attached correctly and it is a SATA drive. I can see all the infor regarding the drive when disk utility is open and it all looks good but I cant access it or do anything with it. It's taunting me!
The install disk is in the drive and the install program runs right up to the point where you have to select the location for the install and there is just nothing in the box where you have to select the hard drive icon.
I have my suspiscions about the drive but any help would be appreciated.

Installed new iMac Intel firmware, restarted and now the computer is stuck

I installed the new iMac Firmware for my iMac Intel 1.83GHz and since restarting its been stuck on the loading screen.
I've tried inserting the restart CD/DVD and holding down C
I've tried restarting it with OptionCommand P + N
Still nothing, any ideas?

You want to disconnect everything possible, to limit what your iMac needs to do when it finally boots up.
According to the "What is Safe Boot, Safe Mode?" article linked below, AirPort will be off during safe boot, anyway. But you'll want to turn it off, if/when available in the menu bar, to limit memory usage when you return to a normal bootup.
Is the "loading screen" you've mentioned the firmware screen? or one of the usual boot screens? Not a black screen, right? If you mean a grey startup screen with the progress indicator dial below the apple, it wasn't able to complete what it was doing due to lack of hard drive space.
We have to hope some caches will clear in the meantime, although sometimes all it takes is shutdown and startup, but that apparently did nothing for you. Now we need to count on safe boot for saving some space.
Safe boot is of critical importance to keep anything else from loading into the system and continually jamming up the memory and what little, if any, free hard drive space.
http://docs.info.apple.com/article.html?artnum=107392
http://docs.info.apple.com/article.html?artnum=107393
http://docs.info.apple.com/article.html?artnum=107394
Emptying Finder trash will be necessary just to be able to open Mail. Too much stuff in Finder trash will not be able to be deleted, so if it's possible to remove something from the trash and put it on the desktop, do so until you can empty the trash, then trash one item at a time, smallest first.
Emptying Mail trash frequently will be necessary to keep each email deletion from enlarging Mail trash to a size too large to delete. Each email can be very small, which is good, as you need a place to start where deletions will be very small. It's bad from the standpoint that it'll take a while for those small deletions to add up to a decent amount of space.
One of the first larger things you can delete is the Firmware Updater if you find it in Applications/Utilities.
Coming back from a full hard drive is really just a matter of trial and error, and remembering to start small. Waiting a week is just a guess on my part. It may be that it's so locked up with the firmware install that there's nothing that would help. Then again, it may have been on the verge of booting, just needing a few extra bytes of trash to empty. What's the symbol for a "shrug?"
Message was edited by: myhighway

Slow iMac from early 2009

I am wondering if there is anything I can do to help my early 2009 iMac: it seems to be really slow lately, especially when I use iPhoto '09 v8.1.2. Even loading things on Safari v7.1 seems to take longer than it used to. I have Mavericks OSX v10.9.5, I'm not sure it that is part of the problem or not. And now Yosemite OSX is out and I'm reluctant to install it while I'm having these issues already. Any advice?
Thank you!
I saw on a different post that using etrecheck could be helpful, so here it is:
Problem description:
My iMac seems slow, especially when using iPhoto and Safari.
EtreCheck version: 2.1.6 (109)
Report generated January 22, 2015 at 12:06:06 PM PST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
iMac (20-inch, Early 2009) (Verified)
iMac - model: iMac9,1
1 2.66 GHz Intel Core 2 Duo CPU: 2-core
2 GB RAM Upgradeable
BANK 0/DIMM0
1 GB DDR3 1067 MHz ok
BANK 1/DIMM0
1 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 9400 - VRAM: 256 MB
iMac 1680 x 1050
System Software: ℹ️
OS X 10.9.5 (13F34) - Time since boot: 20:2:46
Disk Information: ℹ️
Hitachi HDT721032SLA380 disk0 : (320.07 GB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 319.21 GB (199.98 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
OPTIARC DVD RW AD-5670S
USB Information: ℹ️
Apple Inc. Built-in iSight
LaCie P'9233 Desktop Drive 2 TB
EFI (disk1s1) <not mounted> : 210 MB
LaCie (disk1s2) /Volumes/LaCie : 2.00 TB (1.37 TB free)
Apple Inc. Keyboard Hub
Mitsumi Electric Apple Optical USB Mouse
Apple Inc. Apple Keyboard
EPSON EPSON Scanner
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/LaCie Desktop Manager.app
[not loaded] com.LaCie.ScsiType00 (1.2.13 - SDK 10.5) [Support]
[not loaded] com.jmicron.driver.jmPeripheralDevice (2.0.4) [Support]
[not loaded] com.lacie.driver.LaCie_RemoteComms (1.0.1 - SDK 10.5) [Support]
[not loaded] com.oxsemi.driver.OxsemiDeviceType00 (1.28.13 - SDK 10.5) [Support]
/System/Library/Extensions
[not loaded] com.flipvideo.IOUSBCameraMassStorage (1.0.0) [Support]
Launch Agents: ℹ️
[running] com.flipvideo.FlipShare.AutoRun.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
[loaded] com.intego.backupassistant.agent.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.google.keystone.daemon.plist [Support]
[running] com.intego.BackupAssistant.daemon.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[loaded] com.adobe.ARM.[...].plist [Support]
User Login Items: ℹ️
Skype Application (/Applications/Skype.app)
iTunesHelper Application Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
AdobeResourceSynchronizer Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
Internet Plug-ins: ℹ️
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
Google Earth Web Plug-in: Version: 6.1 [Support]
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 2.2.3.7 [Support]
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Support]
FlashPlayer-10.6: Version: 16.0.0.287 - SDK 10.6 [Support]
Silverlight: Version: 4.0.60129.0 [Support]
Flash Player: Version: 16.0.0.287 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
iPhotoPhotocast: Version: 7.0
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Support]
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
User internet Plug-ins: ℹ️
Move_Media_Player: Version: npmnqmp 071701000001 [Support]
WebEx64: Version: 1.0 - SDK 10.5 [Support]
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Flip4Mac WMV [Support]
FUSE for OS X (OSXFUSE) [Support]
Perian [Support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      15% mdworker
      4% WindowServer
      1% fontd
      0% EPSON Scanner
      0% ocspd
Top Processes by Memory: ℹ️
32 MB WindowServer
28 MB mds_stores
26 MB installd
24 MB mds
19 MB Finder
Virtual Memory Information: ℹ️
556 MB Free RAM
396 MB Active RAM
385 MB Inactive RAM
377 MB Wired RAM
645 MB Page-ins
4 MB Page-outs
Diagnostics Information: ℹ️
Jan 21, 2015, 04:04:02 PM Self test - passed

Get rid of Intego. it is useless and will tax your resources including RAM, even if you ad more (which i agree you should).

What hard drive can I upgrade with on iMac intel early 2010

what hard drive can I upgrade with on iMac intel 27 inches early 2010

You can install any 3'5" SATA hard drive on a Late 2009 iMac. Have a look at OWC > http://eshop.macsales.com/shop/internal_storage/hard_drives_and_SSD
Note that Late 2009 and later iMacs have got the temperature sensor inside the hard drive. If you install a hard drive without a sensor, fans won't work correctly. Read > http://blog.macsales.com/2751-proprietary-cable-can-put-the-brakes-on-upgrading- late-09-imacs

IMac 24" (early 2009) Mini Display to HDMI possible?

As there is no Mini Display to HDMI adapter available as of yet I tried to connect a new 24" iMac (early 2009) to a Sharp LCD TV via: Mini Display --> DVI --> HDMI.
Although the iMac recognizes the Sharp and switches resolution automatically (I also tried every other available resolution) the TV screen stays black (HDMI is EXT 5, but I also tried the other EXTs).
I googled and it seems to me that our setup works for some people with some LCD TVs (Sharp too).
Any thoughts where the problem here could be?

Open System Preferences Displays pane Display tab. If there are two displays being recognized, there should also be an Arrangement tab, but stay on the Display tab.
Click the button that says +Gather Windows+. Although you cannot see the image on the TV (since you say it is black), you should now get the control window for that TV display on your iMac's display.
Try making adjustments to the resolution and refresh rate to see if you can get a response on the TV's screen.

Which windows x64 chipset driver (IDE/ATA) is working on an iMac 24" (early 2009)?

The bootcamp software that came with the imac is not working in Windows 8. Is there a separate x64 driver for that chipset? I found several drivers for the nforce chipset which all did not work. I have found drivers for all other devices in that iMac. The missing IDE driver results in a very slow System. Thanks for any suggestions.

From the Boot Camp System Requirements located here: http://support.apple.com/kb/HT5634
Your computer does not support Windows 8: It only supports Windows 7, Vista, and XP all 32 bit.
iMac (24-inch, Early 2009)
4
DVD
DVD

Imac Intel hard disc and disc drive change (in french)

Hello, a fellow from the macbidouille community (french mac board) has put online a very comprehensive guide on how to proceed for changing disc drive and hard drive in an Imac G5 Isight 20" 2,1ghz (also good for the IMac G5 17" 1,9GHz iSight (MA063LL/A), IMac Intel Core Duo white 17" (MA406LL/A and MA199LL) and 20" (MA200LL), but also iMac Intel Core 2 Duo white 17" (MA710LL et MA590LL), 20" (MA589LL) and 24" (MA456LL;
Also another one for the iMac G4 17" 1,25GHz USB2.0 (valid also for the iMac 20" 1,25GHz USB2.0 (M9290LL/A)).
http://macboostfr.free.fr/

You are saying that your hard drive in Disk Utility shows 150 GB, and when you click Info that also shows 150GB? This would be the hardware drive details, indicated by the name of a drive manufacturer like Hitachi or Seagate? Plus when you select that and click Info, the pop up shows the same capacity (followed by the actual number of bytes)?
Offset under the hardware drive in the initial Disk Utility list will be any partitions that you have mounted. If selected, they will show the name under which they are mounted on the Mac. That should give a complete list (bottom of page) of the mount point, drive size, number of bytes used, and number of bytes free. What do they say?

Imac intel self scrolling and zooming

Hi Guys,
<Sorry for my English, It's not my native language>
In the last couple days I found that my iMac is randomly scroll to the bottom of page
in finder, chrome, safari, photoshop and every application
Today it just getting worse becaust it started to zoom in and out
Then, a few hours ago it started to scroll and zoom at the same time
I've look around the discussion forum and found some thread abou this issue
but there seem no solution.
my system is iMac intel 27inch
osx 10.6.8 installed
magic mouse + wacom bamboo
I'm quite sure that the problem is from the OS becaust I tried remove the wacom, keyboard and magic mouse
but it didn't help.
Please anyone could help??
Thanks in advance!!

THat behavior sounds like it could be caused by a stuck key on the keyboard.
If the icon that is selected autonomously is the same one each time, then the first letter of its name may be a clue. If it is something other than the alphanumerical last first-letter of names of items on the desktop, then its first letter is probably the stuck key.
If its name's first letter is the last alphanumerically, then it gets trickier to find. For example, the last filename alphanumerically on my desktop starts with the letter T which means that if I press and hold T, U, V, W, X, Y, or Z it will be selected.
One way to test whether the cause is a stuck key - disconnect the keyboard (unplug it if USB, turn it off if wireless) and wait.

Bluetooth: Cannot pair MacBook Pro 15" (early 2009) and Nokia cell phones

When I try to pair my Nokia cell phone (E65) with my new MacBook Pro 15", the bluetooth assistant hangs after the input of the pairing code. I tried another Nokia cell phone in addition (N70), but had the same issue.
When I initiate the pairing by the phone, then the pairing process seems to be successful, but I still cannot use the bluetooth connection with the phone afterwards (e.g. browsing files on it, 3G internet connection). The connection becomes established for a few seconds, but then the phone is being disconnected.
I never had these problems using my old black MacBook. It still works when I try today. So it must be an issue of the new MBP.
I successfully paired the New MBP with my old MB via Bluetooth - could transfer files for example without any problems. Therefore I think that the Bluetooth hardware (Broadcom) seems to work properly.
The MacBook Pro 15" has the Broadcom chipset, while the old black MacBook has the Cambridge Silicon Radio chipset. Maybe there's an incompatibility between Broadcom and Nokia (?)
Any ideas? Thanks!

I also have an early 2009 15" MBP and am experiencing bluetooth pairing problems. When I first started this computer, I successfully paired my Sonyericsson HBH-DS980 headphones. While using this connection, I accidently lost the connection by moving out of range. After this, the headphones would not re-connect. I deleted the headphones from the MBP bluetooth configuration and tried unsuccessfully to discover and re-pair. I also have another pair of SE HBH-DS220s. They initially paired and worked properly with my MBP and again after loss of connection, would not re-connect or re-pair. I do not have this problem with my first generation MBP so I know it must be something with the bluetooth system in my new MBP. I don't know anything about Mac operating systems, but I bet there is some log file somewhere that is logging a bluetooth problem and thereby locking out that type of device. I would really appreciate a MAC guru's help.
Thanks
Dan

Xserve early 2009 and Service Diagnostics

I've got an Xserve early 2009 (Xserve3,1) that has its fans constantly blowing at maximum speed.
I'd like to run ASD of AXD to locate the problem. Using Disk Utility I made boot disks (CD-ROM, USB, ...) containing ASD 3X106 and AXD 3X104. But the Xserve doesn't recognize neither of them as boot disks. It's impossible to boot from these disks.
Does anyone have the proper procedure to run ASD or AXD on an Xserve?
David

Make sure you are using 3X106 http://support.apple.com/kb/DL948 first.
I made this into a bootable image on my external hard drive. So all i have to do is plug the usb drive to the front of the xserve and boot to it.
Before you do any of this though I would try to reset the SMC. You can do that by shutting down the xserve and unpluging both power plugs for 1 min.
See if that makes a change first, If not go into server monitor and check your temps, maybe one of the sensors is bad and reporting that the machine is hot when its not.

Is the iMac intel duo plug and play?

I am getting a iMac intel duo for christmas and this will be my first mac. Does it recognise new hardware like a usb memory stick or do you have to manually detect it?

I don't think that I would trust that idea. It would be safer and save you a world of hurt from finding out the hard way to eject anything that appears with an icon on the Mac desktop, especially if that icon is accompanied with the eject arrow icon in the left-side panel of a Finder window. There are plenty of folks who have screwed up Firewire/USB devices by just at will disconnecting them. USB key drives, in my experience, are pretty much nonrecoverable if you fry them.

PCI-Express 4gb Xserve (early 2009) and Xserve Raid

Hi, I have one question.
Can I connect my Xserve (early 2009) with a dual 4Gb fibre PCI express card to an Xserve Raid (M9721LL/A) with only a Dual 2GB built in Fibre card? Or perhaps I need to buy a dual 2gb for my Xserve.?
Maybe the question is a little dumb but I am a newbie with these systems.
Thanks in advance
Sam

The 4Gb fibre channel ports are fully backwards-compatible with the 2Gb ports. You can connect them just fine, and they'll run at 2Gb.

IMac (Intel) locked up during iPhoto session

My wife was working between iPhoto and Photoshop Elements 9. After migrating edited photos, she was viewing them in iPhoto fulluscreen when the cursor disappeared and the computer basically locked. I would not respond to mouse or keyboard (both wireless) input. Could not perform 'Force quit'; ended up doing a power button shutdown and then restart. The following is the last part of the console message log including the point where the computer locked and the subsequent restart:
8/12/12 5:13:10 PM          [0x0-0x3f03f].com.adobe.ElementsOrganizer9[443]          Begin Preprocessing image
8/12/12 5:13:10 PM          [0x0-0x3f03f].com.adobe.ElementsOrganizer9[443]          Preprocessing 1200
8/12/12 5:13:10 PM          [0x0-0x3f03f].com.adobe.ElementsOrganizer9[443]          called getImage
8/12/12 5:13:12 PM          [0x0-0x3f03f].com.adobe.ElementsOrganizer9[443]          returned getImage
8/12/12 5:13:12 PM          [0x0-0x3f03f].com.adobe.ElementsOrganizer9[443]          called getImage
8/12/12 5:13:12 PM          [0x0-0x3f03f].com.adobe.ElementsOrganizer9[443]          called getImage
8/12/12 5:13:12 PM          [0x0-0x3f03f].com.adobe.ElementsOrganizer9[443]          returned getImage
8/12/12 5:13:12 PM          [0x0-0x3f03f].com.adobe.ElementsOrganizer9[443]          Saving DOM for media : 1200
8/12/12 5:13:12 PM          [0x0-0x3f03f].com.adobe.ElementsOrganizer9[443]          Adding 1200 to accumulator
8/12/12 5:13:12 PM          [0x0-0x3f03f].com.adobe.ElementsOrganizer9[443]          End Preprocessing image
8/12/12 5:13:23 PM          [0x0-0x3f03f].com.adobe.ElementsOrganizer9[443]          toast deferred because main window is not active, try again later...
8/12/12 5:13:55 PM          [0x0-0x3f03f].com.adobe.ElementsOrganizer9[443]          Error: Error #1502: A script has executed for longer than the default timeout period of 15 seconds.
8/12/12 5:13:55 PM          [0x0-0x3f03f].com.adobe.ElementsOrganizer9[443]                    at flash.utils::Timer/tick()
8/12/12 5:14:00 PM          [0x0-0x3f03f].com.adobe.ElementsOrganizer9[443]          wrote backup tally count: 18
8/12/12 5:14:00 PM          [0x0-0x3f03f].com.adobe.ElementsOrganizer9[443]          FLV: loaded 0 open folders
8/12/12 5:14:00 PM          [0x0-0x3f03f].com.adobe.ElementsOrganizer9[443]          saving 0 open folders
8/12/12 5:14:00 PM          [0x0-0x3f03f].com.adobe.ElementsOrganizer9[443]          main: return 0
8/12/12 5:14:01 PM          [0x0-0x3f03f].com.adobe.ElementsOrganizer9[443]          config: -1073745372 pri 1config: -1073745372 pri: 1Start canMigrate
8/12/12 5:14:01 PM          [0x0-0x3f03f].com.adobe.ElementsOrganizer9[443]          End canMigrate returns with 13
8/12/12 5:14:18 PM          quicklookd[449]          Failed provisional load: Error Domain=NSURLErrorDomain Code=-1100 UserInfo=0x10042ce10 "The requested URL was not found on this server." Underlying Error=(Error Domain=kCFErrorDomainCFNetwork Code=-1100 UserInfo=0x10042ebf0 "The requested URL was not found on this server.")
8/12/12 5:14:18 PM          quicklookd[449]          Failed provisional load: Error Domain=NSURLErrorDomain Code=-1100 UserInfo=0x10015c620 "The requested URL was not found on this server." Underlying Error=(Error Domain=kCFErrorDomainCFNetwork Code=-1100 UserInfo=0x100196c70 "The requested URL was not found on this server.")
8/12/12 5:14:18 PM          quicklookd[449]          Failed provisional load: Error Domain=NSURLErrorDomain Code=-1100 UserInfo=0x100447f40 "The requested URL was not found on this server." Underlying Error=(Error Domain=kCFErrorDomainCFNetwork Code=-1100 UserInfo=0x100447620 "The requested URL was not found on this server.")
8/12/12 5:14:18 PM          quicklookd[449]          Failed provisional load: Error Domain=NSURLErrorDomain Code=-1100 UserInfo=0x1004456d0 "The requested URL was not found on this server." Underlying Error=(Error Domain=kCFErrorDomainCFNetwork Code=-1100 UserInfo=0x10043fa90 "The requested URL was not found on this server.")
8/12/12 5:14:19 PM          quicklookd[449]          Failed provisional load: Error Domain=NSURLErrorDomain Code=-1100 UserInfo=0x100424c40 "The requested URL was not found on this server." Underlying Error=(Error Domain=kCFErrorDomainCFNetwork Code=-1100 UserInfo=0x100442cd0 "The requested URL was not found on this server.")
8/12/12 5:14:20 PM          quicklookd[449]          Failed provisional load: Error Domain=NSURLErrorDomain Code=-1100 UserInfo=0x127a1d3f0 "The requested URL was not found on this server." Underlying Error=(Error Domain=kCFErrorDomainCFNetwork Code=-1100 UserInfo=0x123ee8e40 "The requested URL was not found on this server.")
8/12/12 5:14:20 PM          quicklookd[449]          Failed provisional load: Error Domain=NSURLErrorDomain Code=-1100 UserInfo=0x123e39380 "The requested URL was not found on this server." Underlying Error=(Error Domain=kCFErrorDomainCFNetwork Code=-1100 UserInfo=0x123e39320 "The requested URL was not found on this server.")
8/12/12 5:21:59 PM          iPhoto[383]          Error in CoreDragGetMouseLocation: -1850
8/12/12 5:34:08 PM          com.apple.launchd[1]          *** launchd[1] has started up. ***
8/12/12 5:34:27 PM          com.apple.launchd[1]          (com.apple.xprotectupdater[42]) Exited with exit code: 252
8/12/12 5:34:29 PM          com.apple.WindowServer[83]          Sun Aug 12 17:34:29 Macintosh-0022413075b3.local WindowServer[83] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
8/12/12 5:34:47 PM          com.apple.launchd.peruser.502[156]          (com.apple.Kerberos.renew.plist[200]) Exited with exit code: 1
The mac is a 3.5 year old 20" Intel iMac, core-duo, 4 gb ram, with a 500 mb hd. We have had issues with the mac 'freezing' in the past, but not recently. If anyone can shed light on the cause, or point me in the right direction, it would be greatly appreciated.

Hello Agaber
Try to force quit the application with the steps in the article below. You also may have to gold the power button down for about 10 seconds to force your iMac to power off.
Mac OS X: How to quit an unresponsive application using Force Quit
http://support.apple.com/kb/ht3411
Regards,
-Norm G.

IMAC Intel Early 2009 and iphoto

Similar Messages

Maybe you are looking for