IMac (intel) Mountain Lion screen blank
My iMac screen has blanked (black). Currently showing "Loading Photos..." which happens when it goes into screen saver mode. I have tried pulling the plug and restarting to no avail. My previous iMac G5 failed in a very similar way and had to be replaced. Is this the same problem ie. design fault of vital components?
Further to my initial question above: I have been pressing random keys and found that F9 brings the display back but as soon as I try to click on anything it reverts back to black with the timer twirling. Any ideas?
Similar Messages
-
I updated my iMac to Mountain Lion and when I want to fit my screen view... in the last version I had to examples where I could choose wide after format but I miss that function now in Mountain Lion. Can anyone please help me???
I'm sorry for my bad english, my problem is that I want the program I open in a new window to be avilable in full screen mode. Before I uppdated my os to Montaine Lion I could choose wide under screen in settings. I'll take an ex for you. When I play poker online I want to see the tabel in full screen but I don't manage to fix that. Do you Sir have any idea???
-
just update my iMac from Mountain Lion to Mavericks and the application are slow to open. The same happens to opening webpages . Please help
Resetting your Mac's PRAM and NVRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Reinstalling Mavericks, Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion, Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
Shared drives no longer network accessible on iMac running Mountain Lion.
Hey all,
I've been searching the community on and off for weeks and have not been able to come to a solution. I have an external hard drive connected to a 2007 iMac running Mountain Lion that has successfully been shared on my network for over two years starting with Snow Leopard. Just recently I noticed the shared drives were no longer showing up on my networked Macs (running anything from Leopard to Mountain Lion). What's odd is the shared drives will connect and show up for the first 5 minutes or so after the iMac is restarted, but will go offline soon after. The iMac shows up in the side bar, but I get the dreaded "Connection Failed" message in Finder when I click "Connect As" after the shared drives first go away. Screen sharing works fine all the time when accessing the iMac. I've tried everything on the iMac from disabling the firewall completely to renaming it on the network to disabling SMB on all shared partitions. Anyone have any suggestions?What version of OS X are you installing on the external drive? Is the drive partitioned GUID and formatted Mac OS Extended, Journaled?
-
Mail "unexpectedly quits" after migration from snow leopard to new iMac running Mountain Lion
Mail "unexpectedly quits" after migration from snow leopard time machine files to new iMac running Mountain Lion. I can run connection doctor OK. But the activity window is blank. If you try to open message viewer window then mail program crashes. Would really like to get my old emails back as the old imac is totally dead. Thanks for any help.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter the name of the crashed application or process in the Filter text field. Post the messages from the time of the last crash, if any — the text, please, not a screenshot.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into a message.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful. -
mpeg video file won't open in quick time player on my macbook running snow leopard.
works fine on iMac running mountain lion.
any ideas?HI,
If iChat is Open and your think Accounts/Screen Names are logged in then go to the Window Menu
This should list the accounts that are logged in with various keystrokes ( Apple/CMD ( or ⌘) and a Number) shown next to them.
Using these should get the Buddy list "back".
It is possible to Hide the Buddy list and then Quit iChat.
iChat will then "remember" where the windows were eve if this was Hidden.
Can you confirm that after reinstalling or restoring from Time Machine with possibly an Earlier Version you have Downloaded the COMBO version of OS X 10.6.8 and "run the COMBO" (Installed it - again) to update iChat ?
It is possible the text chat Window is also Hidden on double clicking a Buddy.
The easiest way for this to happen is to use a second Display and drag some windows to the second Display.
iChat "remembers" where you last had Outgoing Chats so Audio and Video windows will be where you left them as will Text Chats.
Incoming Chat Invites are normally in set places unless there is a chat already open to that Buddy.
With Windowing issue like this is sometimes pays to delete com.apple.ichat.plist itself (on it's own) and restart iChat (this plist holds the window positions amongst other things)
8:49 PM Monday; February 27, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
21in. imac running Mountain Lion will not start just get grey no entry sign
21in. imac running Mountain Lion will not start just get grey no entry sign
David,
Please carefuly read what Apple says in how to troubleshoot this issue. Also PLEASE complete your profile,we don't even know what iMac you have or the version of OS X it is running.
Gray screen appears during startup -
I have a new iMac, running Mountain Lion, with CS6. I have the tablet with the keyboard. I'm finding that in CS6 I have to type command-C and command-V repeatedly to copy or paste anything. It is not the keyboard; I've switched that out. Is it some kind of tablet interference?
Yes, EEK!
Have you run Microsoft Update and installed the latest 14.2.4 Office update yet?
Humor me. When you perform copy, do you then establish keyboard focus by clicking the mouse pointer on the destination screen for the paste action -- before keying the paste?
Have you installed any third-party keystroke mapping software that may be getting between the operating system and these two applications?
Under System Preferences > Accessibility > Keyboard, have you enabled Sticky, Slow, or EEK! Keys?
In System Preferences > Keyboard > Keyboard Shortcuts > Keyboard & Text Input, doe the check marks look like the following: -
How to connect my perfectly-working 20-year-old Apple Personal Laserwriter 320 to my iMac running Mountain Lion?
Thank you, Morty S.I have a perfectly-working LW 4/600 with exactly the same issue. They use localtalk - a long obsolete network connection, that doesn't connect to modern networks, and appletalk as the comm protocol.
I think the only choice you have is to use an old powerPC Mac as print server. You tell me which old Mac you have, with a localtalk connector, or that runs OS X 10.4 or earlier (so it speaks appletalk), and I'll tell you how I've done it for the past 11 years or so.
Right now I use a G4 running 10.4.11, plus an etherMac ethernet to localtalk adapter.
Before, I used a PMac 6100 running LPD server software. -
How do I transfer my Quicken 2004 data from old MacBook to new Imac with Mountain Lion
I want to transfer my Quicken 2004 (upgraded to 2006) data from MacBook running OSX 10.5.8 to new Imac running Mountain Lion with Quicken 2007 Lion. How do I do this? I thought from what I've read on line that all I needed to do was upgrade the quicken to 2006 and then the data would be readable by Quicken 2007 Lion. Any help would be greatly appreciated!
OK: This information is VERY helpful! Note my comments below:
elcamera wrote:
Here is what I'm doing step by step:
Open Quicken 2006 (it did automatically convert the Quicken 2004 data) -- GOOD!
Do not do these steps
I went to File> Export> All
Named the file "Copy of Quicken Data.qif" and saved it to the desktop of my MacBook.
At this point if I send the file as is it would not open on the other end saying that Power PC apps are not supported.
I discovered that if I go to File> Get Info in the Finder window before I send it and change the setting "Open with" from "Preview" to "Quicken 2006", that the file would be recognized by the new computer.
Compress the converted Quicken 2006 data file by Control-Clicking on the converted Quicken 2006 data file and it should save with a .zip extension.
Send the automatically converted and compressed Quicken 2006 data file with the zip extension I send it to myself via email as an attachment, I save the attachment to the desktop of the Imac. Uncompress it by double-clicking it.
I open Quicken 2007 Lion
Go to File>Open File... Import>From QIF
Select the converted and uncompressed Quicken 2006 data file attachment that you saved to the desktop of the iMac and then uncompressed. "Copy of Quicken Data.qif"
It begins to download, then I get a warning
"Quicken is unable to import "Copy of Quicken Data.qif" becasue the transaction displayed below is too large... it goes on to say that there is possibly too much text in the split line detail etc.
It should open in Quicken 2007 for Lion/Mt. Lion
Thanks for your time, any insights would be much appreciated. -
i have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .
Kappy wrote:
Boot Camp doesn't install the drivers. You have the drivers on a separate USB device if you followed directions. Once in Windows connect the USB drive with the driver software. It should startup automatically and install the drivers.
You don't even need to do that. As downloading the drivers from within Boot Camp Assistant can be unreliable, it is better to get the package directly from here:
http://support.apple.com/kb/DL1638
Copy the .zip file to a USB flash drive or burn it to a DVD in OS X. Install Windows as normal, insert the flash drive/DVD in Windows, copy the .zip file to the hard drive, extract it, then run the setup executable. -
My iMac running Mountain Lion can't see my iMac running Snow Leopard on my network.
My iMac running Mountain Lion can't see my iMac running Snow Leopard on my network. Both Macs work fine and the SL Mac can see and connect to the ML Mac.
There isn't a script.
Mail connects to any standard email server.
Open the Connection Doctor from the Window menu.
Click Show Details and Check Again.
What errors does it post trying to connect to your email provider.
I dont' think there is any personal information in the output, but you might want to sanitize the output in a text editor before posting the output here in case there is a login user name or something like that. -
i have to upload video from my hewlett packard t200 camcorder to my mac. but mac won't recognize the camcorder files. i even bought flip4mac by tele stream which so far is useless. please help me use my camcorder with my iMac os mountain lion 10.8.2
i tried to get the installation disc for the camcorder but mac wont' recognize it becaue it is windows based i guess.
i just bought the camcorder a few months ago and when my computer crashed thought i'm finally getting a mac...it's been a costly venture which has resulted in more frustration than before my pc.
now the things i want to use with my mac that i thought would be even simpler...are not even useable...
helpThat camera shoots H.264 in an .avi wrapper.
You will have to transfer the files via the Finder.
Get a free copy of MPEG Streamclip and convert them to QuickTime .mov using the H.264 codec if you are presumably editing in iMovie.
Note that your list of video codecs won't look like mine as I have Final Cut Pro, but H.264 is definitely an option for you. -
I've got a new iMac with Mountain Lion OS. Have created a slideshow complete with music in iPhoto, but every time that I try to export it to an iPhoto slideshow folder, it gets halfway through and freezes. This has been going on for a couple of days. I've tried opening iPhoto holding down the option key, but it doesn't make a difference. Any advice, please?
Upgrade to v9.4.1 or
Trash the HP Plug in from /Library/Application Support/iPhoto
There are two libraries where this plugin might be
HD/ Library
and
HD/Users/Your Name / Library
(On 10.7 or later: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library) -
I updated my iMac to Mountain Lion. All the files were deleted. I have Time Machine backups. When I restart the mac pressing Command R to restore it from the backup it shows the previous OS X (Leopard) beside the date of the backup that I want to select. Will it go back to Leopard if I restore it from the backup?
No, it won't revert to the prior OS X but you you may have third party apps installed that were compatible with Lion that may not be compatible with Mountain Lion.
App Compatibility Table - RoaringApps - App compatibility and feature support for OS X & iOS
After you restore from TM, check HD > Incompatible Software
Maybe you are looking for
-
SDDM 3.3EA2 Data Types diagrammer
Would it be possible to include the right mouse button menu option of 'Resize Objects to Visible' on the Data Types diagrammer similar to that on the Relational diagrammer?
-
Report O/P in graph.(all in one vetical line).
I want outpout in graph ..my requirement is i have to create a report equipment wise calculating oee in graphical format. suppose i had a equipment ..in my report i have to calculate its idle time ,maintaince time and number of batches processed thr
-
Why can't I recieve or send mail on my macbook pro? Mail works just fine on iphone4
The account comes up with a little warning triangle by the name of the account, when I click on it this is the first message : There may be a problem with the mail server or network. Verify the settings for account "@rogers.com" or try again. The ser
-
How do i send a song from my itunes on my mac-in an email?
How do i send a song from my itunes library- in an email??
-
Hi everybody, i am getting one Error ie "Error in Commandline arguments" but in my application ie Through B1 wizards i am using that application ie "SAPB1 Addon installer wizards" But i am giving Commandline arguments in like this ie going in Solut