IMac intel snow leopard white screen must restart?
since i installed snow leopart my iMac frozse with a white screen. I pressed and held the power button and the computer restared ans seems OK. I ran the Hardware test from the install disc and no problems were fond. What is wrong?
It soumds like nothing is wrong now, but there isn't much we can say without more info from you, like what you were doing when the iMac froze, if this happened just once, etc.
Similar Messages
-
My new IPad won't sinc with my IMac Intel Snow Leopard 10.6
Having issues getting IMac to see IPad. when plugged in I hear the notification, but my IMac does not charge the IPad or recognize that it is there. I am using Snow Leopard with my 2006 IMac Intel machine. Any suggestions?
http://support.apple.com/kb/TS1591?viewlocale=en_US
-
IMac (Intel) only displays white screen with Apple after power-outage
Last week, we had a power-outage. iMac is plugged into a surge protector. When power was restored, powered up the iMac, but it will not get past the initial white screen with the Apple logo and the spinning black/white wheel. I have tried shutting down and re-starting, unplugging and re-starting, etc. Nothing happens. Ideas?
You HD probably crashed. Please run Apple Hardware Test in Extended Mode and see if it reports any errors. If it does please post them and we will try to translate them.
Also if your area has power issues I would strongly recommend replacing the surge protector (which is worthless in a power outage) with a UPS. A Uninteruptable Power Supply has a battery in it that is designed to provide enough power in the event of a power outage so the computer can do an orderly shutdown. I recommend the APC brand, you can find UPS's at your local office supply store or even Costco. A good quality one will cost about $100.00 or more.
Roger -
IS THE SITUATION HOPELESS
I used Target mode to transfer files to a new i7 iMac running Snow Leopard 10.6.8 from an older Dual core Intel machine (EMC 2105) also on 10.6.8. but originally Tiger 10.4. The operation was successful and I ejected the disk icon from the new machine and powered down the old machine. When this was restarted the next day there was a grey screen with flashing Mac symbol alternating with a 'no entry' sign and occasionally a question mark.Keyboard and mouse were unusable so k inserted the original instal disc (No.1 for 10.4. with installer 1.0.4) which came with the machine in 2006 in an attempt to boot from this. The ensuing window said this was not possible and now it cannot be ejected.I have tried everything ! It offers Disk Utility and other options like Terminal but that doesn't work either.I 'repaired disk' and that was pronounced o.k. None of the various keystrokes at start up will work, and the computer will only offer the installer disc continually.The only option would seem to be is to erase the hard drive completely from the disc in the machine.I don't want to do this as there is still material which I need to recover. I think the drive has in some way been corrupted by using it in target mode, and I don't know if there are any other options to try.
Please tell me how to get this disc to eject !Graham Giles wrote:
Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
• I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
I know that using a cloned drive would work well in this instance.
I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive? -
Microsoft Office 2004 (Word) unable to save files
I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and create a new document but I cannot save it. I reinstalled Word but that didn’t help. Then went to the Internet and found at least one other Mac user having the same problem which it suggests is caused by a recent Mac Security Update:
http://answers.microsoft.com/en-us/mac/forum/macoffice2004-macword/word-2004-wil l-not-open-or-save-documents/b04eb870-9b0d-4f3b-bb47-b122301e36f6
So I check for a new Mac Security Update and sure enough there was one. I downloaded it and now Word seems to be working, as it should. I can both open and save files. The only problem remaining is that when I open Word I get the following error message “An unexpected error occurred while trying to load the Microsoft Framework library”. I contacted Apple but they were unable to help.
How can I get rid of this error message?Look, I realize you might have to get your machine working, so this is how you revert back.
Restore proceedure to pre-Security Update 2012-001 v 1.0 & v 1.1
#1 Backup your personal data off the machine.
Backup files off the computer (not to TimeMachine). If you don't have a external drive, get one and connect to the USB/Firewire port and simply drag and drop copy your User folder to the external drive, it will copy all your files. It's best to have two backups of your data off the machine when trying to restore.
Disconnect all drives now to prevent any mistakes from occuring.
#2 Reinstall OS X 10.6 from disk
Get out your 10.6 install disk and make sure it's clean and polished (very soft cloth and a bit of rubbing alcohol, no scratches) If your disk is borked, you'll have to order a new one from Apple with your serial number.
Hold c boot off the 10.6 disk (wired keyboard, internal optical drive), use Disk Utility First Aid to >Repair Disk of your internal drive (do not format or erase!!), Quit DU and simply re-install 10.6.
Note: Simply reinstalling 10.6 version from disk (without erasing the drive) only replaces 10.6.8 with 10.6.x and bundled Apple programs, won't touch your files (backup anyway) or most programs, unless they installed a kext file into OS X itself. (only a few on average do this)
#3 Update to 10.6.8 without Security Update 2012-001 v1.0 or v1.1
Reboot and log in, update to 10.6.8 via Software Update, but EXCLUDE THE Security Update 2012-001 by checkinig the details and unchecking the blue check box.
#4 Reinstall any non-working third party programs
When you reboot, make sure to reinstall any programs that require kext files installed into OS X, you'll know, they won't work when you launch them or hang for some reason as they are missing the part they installed into OS X.
If for some freakish reason you get gray screen at any time when booting (possible it might occur when you reinstall older programs), hold the shift key down while booting (Safe Mode, disables kext files) and update your installed third party software so it's compatible with 10.6.8.
https://support.apple.com/kb/TS2570
That's it really. -
Are all Intel 24" iMacs w/Snow Leopard OK for Mountain Lion? My serial number doesn't match any of the one in the iMac ID list; they all start with "MA" or "MB" and mine starts with a "W." Purchased direct from Apple August 2007.
Macs that can be upgraded to OS X Mountain Lion
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)
Open System Profiler and report what you find displayed for the Model Identifier. -
Screen Sharing my iMac Running Snow Leopard
So I've enabled Remote Management on the iMac running Snow Leopard. I prefer this tab to the screen sharing tab because I like to have the remote management status tab active on the top menu bar.
A screen sharing session now disables the screen saver and display sleep on the iMac. Is there any way to reenable screen saver and display sleep when a screen sharing session is active?
My next question is: what is the minimum configuration in the remote management tab required for screen sharing?
Thanks,
IvanThis post seems to be a duplication
10:47 PM Tuesday; December 27, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
My early Intel iMac running Snow Leopard will not boot past the apple logo. I have tried holding the c key and inserting the install disk, but nothing. What do I try next?
I have tried resetting PRAM and all other items listed in the Apple support site. This happened after an update to iTunes was added. Also this is happening to other people. Please help.
-
IMac with Snow Leopard - Mail 4.5 not downloading e-mails
Hi there,
I am using an iMac with Snow Leopard 10.6.8, which has Mail 4.5 on it. Since yesterday, my Mail application will no longer download e-mails. When I open it, the little tray in the corner says it is downloading message 26 of 26, but after it finishes, nothing happens. No new Mail has been downloaded. It keeps doing this, even after a reboot (I have double-checked that the order of my Mail hasn't changed, and it isn't just showing at the bottom).
Today, I removed my Gmail account from Mail, and added it again. I entered my Gmail username/password. Once set up, it proceeds to download e-mails (downloading 1 of 26). The thing is, it has shown this constantly for the last 20 minutes. I don't even have big recent e-mails.
I'm not sure what I can do to resolve this, would appreciate any suggestions.
Many thanks.
P.S. I don't think it's a Gmail problem, as I have a MacBook Air with Lion, and Mail is downloading all e-mails on it without any issues.Hi Zak,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward. -
Ok, tried message boards everywhere to try and figure this out before having to post a question. Have a 21.5" iMac running Snow Leopard 10.6.8. After updates no wireless capability for ipad or laptop, imac connects fine but nothing else. No dashboard widgets work, Skype won't work. What goes?
Your post is pretty lengthy and I have to admit I didn't read it all. Please try restarting in Safe Mode, if that doesn't work please do both a SMC and PRAM reset. These may take 2-3 attempts.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys. -
i have a 2008 imac with snow leopard. i installed update 10.9.3 not realizing it's best for Maverick's users. Now my Itunes 11.2.2 won't burn playlists to CD. Anyone else with this problem? CAn I uninstall the 10.9.3 update? Also my HP scannerwill not save the displayed scanned document since this update! it just saves gray.
If you have your old system backed up then erase the drive and restore your backup. If you don't have a backup then backup your entire Home folder. Erase the drive and install Snow Leopard after which you can restore your Home folder from the backup.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. Be sure you configure your initial admin account with the exact same
username and password that you used on your old drive. After you finish Setup
Assistant will complete the installation after which you will be running a fresh
install of OS X. You can now begin the update process by opening Software
Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Or you can:
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
computer and after the chime press and hold down the OPTION key until the boot manager
screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall the 10.9.3 update: OS X Mavericks 10.9.3 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.3 update: OS X Mavericks 10.9.3 Update (Combo). -
My 2006 iMac running Snow Leopard won't boot even after erasing and re-installing Snow Leopard. I erased and re-installed by putting the iMac in Target Disk mode and usin my MacBookPro as the host. But after numerous attempts I still can't get it to boot either from the HD or DVD drive. I just get the white screen after the wheel stops spinning. I can't get it to run Hardware Test - just get the white screen. If I use Disk Utility via my MBP it says the disk appears OK. All the Snow Leopad files appear to have been installed. What can I do?
Hi-NRG Bwoy wrote:
I erased and re-installed by putting the iMac in Target Disk mode and using my MacBookPro as the host.
Reet the SMC and the PRAM
Cheat sheet to help diagnose and fix your Mac
Perhaps you installed the wrong version OS X onto the iMac, you can't use the disk from another Mac.
clean the disk.
If it's not working then use this method to create a bootable 10.6 USB from the iMac machine specific 10.6 disk or the 10.6.3 retail disk on your other Mac, use it to boot the iMac with.
http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
How to erase and install Snow Leopard 10.6 -
I still have problems since migrating to iCloud with receiving email through my Mail app on my iMac running Snow Leopard 10.6.8 (and it can't be upgraded to Lion). Like I found on different places on internet, in Mail Preferences I made a new account, once with imap.mail.me.com and once with p02-imap.mail.me.com, like differently advised. Sometimes it works, sometimes not, untill I fill in again and again the advised changes in the Preferences.
Is there a good advise arround to have my settings once and for all running well, as I expect from Apple stuff? Is Apple listening to the many complaints on this iCloud matter, or is my Apple Micro becoming too Soft to be heard?
Thank you beforehand for helping me (and many others). Best regards,
Jerome from BelgiumDear Roger and all interested,
Right you are with stating you can't have MobileMe and iCloud at the same time. To explain the history of my problem:
I have a small network of 3 computers: 1) MacBook Air 1.6 GHz Intel Core 2 Duo - 2) iMac 2.66 GHz Intel Core i5 - 3) iMac 2 GHz Intel Core Duo
For the first time hesitating to upgrade as soon as a new system is available, a friend nevertheless could convince me of the usefullness of Lion and iCloud. During upgrading process I found out that my - 3) iMac just was narrowly to "old" for Lion.
And indeed the migration from MobileMe to iCloud went almost automatically. But quite soon I established that my "old" iMac was no more receiving @mac.com mail. Having a look to the preferences of Mail, I couldn't change anything as I had no more MobileMe access, being migrated to iCloud. Apple information told me to select "Mail, Contacts & Calendars" in the System Preferences, but Snow Leopard has no such thing.
Search on internet told me more or less how to set up an IMAP account in Snow Leopard in Mail preferences with as server address "imap.mail.me.com" with SSL on and use of port 993. This shortly worked. After restart no more. Setting up the account again and again, sometimes working, sometimes not. This is not exactly an almost automatically migration. Some other information told me to use "p02-imap.mail.me.com".
Current situation: after start up, a window from Mail asks me to give my password for the account on the MobileMe IMAP-server "mail.me.com" (which I expected to be "p02-imap.mail.me.com"). Password not accepted, retry and retry, then just click on Cancel. Result: iCloud account has a kind of lightning symbol next to it (= not working). I click on the symbol, one time it disappears and the account works, one time it asks for the password again, and again not accepted. Repeating this procedure untill it works. So for 3 days I realized to make it finally working up to now, but all this does not look to be the right way and doesn't sound a too reassuring situation to me.
When I look at Mail preferences in Snow Leopard now:
Account Type: MobileMe IMAP
Incoming Mail Server: mail.me.com (expected here p02-imap.mail.me.com)
Outgoing Mail Server (SMTP): p02-imap.mail.me.com
(Advanced) Authentication: Apple Token
What I find in preferences (automatically established) on my Lion computers:
Account Type: iCloud IMAP
Incoming Mail Server: p99-imap.mail.me.com (shows grey)
Outgoing Mail Server (SMTP): smtp.me.com
(Advanced) Authentication: Password (no Apple Token option)
So I tried to make Snow Leopard Mail similar based on the Lion preferences:
Account Type: MobileMe IMAP (found no way to change to iCloud IMAP)
Incoming Mail Server: mail.me.com (shows grey, found no way to change to "p99-imap.mail.me.com")
Outgoing Mail Server (SMTP): smtp.me.com
(Advanced) Authentication: Password (no Apple Token option)
Same result as before: asks for password, which I have to cancel, then click away the lightning symbol, after which it works (but perhaps not tomorrow).
Best regards,
Jerome from Belgium -
What do ido if My iMac (intel) starts but the screen remains dark.
What do ido if My iMac (intel) starts but the screen remains dark.
Reset the SMC > Intel-based Macs: Resetting the System Management Controller (SMC)
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
Reset the PRAM > Resetting your Mac's PRAM and NVRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
Try booting into Safe Mode > Mac OS X: Starting up in Safe Mode
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Or if you have installed new RAM, try reinstalling it or the iMac's original RAM making sure that the modules are fully seated in the slots.
Then if it won't light, seek sercice from your Local Apple Authorized Service Provider or Apple Store. > Apple - Support - iMac - Service FAQ -
Using iMovie 7.1.4 on an iMac w/ Snow Leopard; HD video imported with a Firewire cable transfers fine, but audio arrives with major static; problem persists w/ different cameras & Firewire cables; source DV tape has no audfio static.
I forgot to write down my computer specs:
iMac 27 Mid 2011
2.7 GHz Intel Core i5
4 GB 1333 MHz DDR3
AMD Radeon HD 6770M 512 MB
OS X 10.9.2
Maybe you are looking for
-
Okay, i just dished out $1000 for this thing and can't even create an HTML project. The sample projects won't even open and i've confirmed they exist. Details: installed RoboHelp 6. When i run RoboHelp HTML, and try to open one of the sample projects
-
My ipod touch 5th gen will not connect to itunes, but my computer registers my ipod. i have tried placing my ipod in recovery mode, uninstalled and reinstalled itunes, and restarted my laptop but my ipod will not connect to my itunes..... help ._.
-
Variables Not Appearing Correctly
I am using RoboHelp 8 and FrameMaker 9. In RoboHelp, I have linked to a FrameMaker book. I have encountered a problem that I cannot seem to resolve. All of my FrameMaker variables have imported correctly. However, in a few instances the following cod
-
"Missing component" messages in the installation logs
I installed Oracle Application Server 10.1.3 on Windows, and I found some strange entries in the installActionsxxxxx.log files: "# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.bc4j
-
ZCM 11.2 DLU does not pass the full context
ZCM 11.2 and 11.2.1 ZCM 11 installed on windows server 2008 R2 Windows 7 64 users client NC2 4 and NC2 4a Authenticating to Suse 11 OES 11 server When a new user (student) logs into a workstation the user is created, the user does login, but then an