Imac (intel) will boot but nothing will open

Imac (intel) will boot but nothing will open.

Amazingly ..... I solved the problem by taking the batteries out of the wireless mouse.
The mouse seemed to work.  The curser would move around and the dock would pop up, but nothing would open.
Everything's fine now.

Similar Messages

  • Ive downloaded itunes 12 times and it will finish but nothing will happen..

    ive downlaoded itunes 7 12 times and it will finish downloading and nothing will happen...its no where to b found....i save it b4 i download it and that gets screwed up...i swear im goin to go outa my mind i have searched and searched for a answer and there jsut isnt one....please help me bc i dont c anyone else with this problem!!!!!

    i'm having the same type of problem. I'm not sure mine is downloading though. It says it has downloaded, but if it did it was instant. As soon as I click on the download button it says it has finished downloading. I can't find it on my computer anywhere. If anyone can help, I'd appreciate it
      Windows XP  

  • My iMac will boot, but loses contact with BlueTooth

    My iMac will boot, but loses contact with Bluetooth after logging in, and then there is no way to interact with the system.  I can only shut it down.  Any help in resolving this issue will really be appreciated.
    Thanks -
    Dudley Warner

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • HT1473 My itunes will not open at all - I repeatedly get the message"itunes library is corrupted...not installed correctly...please reinstall itunes" I have tried opening all my itunes folders but nothing will even open.

    My itunes will not open at all - I repeatedly get the message"itunes library is corrupted...not installed correctly...please reinstall itunes" I have tried opening all my itunes folders but nothing will even open.

    Let's try a repair install of iTunes first.
    Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", click "Change" and then click "Repair".
    Can you launch your iTunes now?

  • I tried to download some photos from a corrupted CD and now every time I try to open iPhoto the frame pops up but nothing will load.  I just get the spinning color wheel.  Any ideas???

    I tried to download some photos from a corrupted CD and now every time I try to open iPhoto the frame pops up but nothing will load.  I just get the spinning color wheel.  Any ideas???

    What version of iPhoto? Assuming 09 or later:
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • HT5177 I am trying to share my movie, but nothing will open.  I get error messages saying that it is an unrecognized format.  What to do?

    I am trying to share my movie, but nothing will open it.  I get an error message saying it is a unrecognized format.  I have done this process many times before with no issues.  FCPX is what I am using and trying to send it to Vimeo.  My extension is coming up as .fcpproject.  Any suggestions?

    mindfullness wrote:
    I am trying to share my movie, but nothing will open it.  …  My extension is coming up as .fcpproject. 
    a file with an .fcpproject extension is no video you can share.
    it contains only data of your project, for usage in FCPX.
    follow Tom's advice, or read the manual
    http://help.apple.com/finalcutpro/mac/10.0.6/#ver9d10063a
    which explains the easy upload to Vimeo from within FCPX.

  • I have tried to download Mavericks on my 2010 iMac(10.6.8), but nothing happens, not even the install app downloads, also I tried to download chrome, I moved it to the applications folder and when I opened the folder it wasn't there

    I have tried to download Mavericks on my 2010 iMac(10.6.8), but nothing happens, not even the install app downloads, also I tried to download chrome, I moved it to the applications folder and when I opened the folder it wasn't there. I have a 1tb hard drive that is mostly empty. By the way I just got this imac used from a reseller.

    Mavericks downloads into the Applications folder, where you can install it.   Some Mac App Store Troubleshooting information and how to resume a download that was interrupted; some of the information here might get you an answer.   Failing that, try contacting Apple Support.

  • Using the mini hdmi cord to connect the macbook air and my tv I cannot seem to have anything appear or be heard on my tv.. the MacBook air will flash blue like it is connecting but nothing will seem to work Any advice?

    Using the mini hdmi cord to connect the macbook air and my tv I cannot seem to have anything appear or be heard on my tv.. the MacBook air will flash blue like it is connecting but nothing will seem to work Any advice?

    Hi kxh3011,
    Thank you for using Apple Support Communities.
    This feature is called closed clamshell mode.  To learn more about using closed clamshell mode with an external display and how to set it up, please take a look at the article below.
    Mac notebooks: How to use your computer in closed clamshell (display closed) mode with an external display
    Cheers,
    Alex H.

  • Okay so about four days ago my ipad says it has apps to update but whenever i go to the update apps page it will not load and i have tried rebooting signing out but nothing will work, any suggestions?

    Okay so about four days ago my ipad says it has apps to update but whenever i go to the update apps page it will not load and i have tried rebooting signing out but nothing will work, any suggestions?

    If you are getting the blank app update screen, many, many people are having this problem over the last couple of days. It is a problem that Apple must fix now.
    According to Fly150 in another discussion, this will work.
    If you want to update the Apps while waiting for Apple to fix Updates:
    1. Go to App Store
    2. Select Purchased
    3. Select All
    4. Scroll down to find the Apps showing update
    5. Select update on the Apps
    This should update the Apps and get rid of the update count in App Store. Apple needs to fix this. It is a workaround only until then.

  • TS1702 I downloaded a pokédex app on my iPod touch, on that app you can buy other region Pokemon, I bought a region but I won't download on my iPod, it said I purchased it but nothing will download, help?

    I downloaded a pokédex app on my iPod touch, on that app you can buy other region Pokemon, I bought a region but I won't download on my iPod, it said I purchased it but nothing will download, help?

    What happens when you try to download it?
    have yo contacted the developer of the app?
    Last, contact iTunes
    Apple - Support - iTunes - Contact Us

  • Since latest Firefox update, other web sites will load but Netflix will not. Netflix will load in Internet Explorer.

    Since latest Firefox update, other web sites will load but Netflix will not. Netflix will load in Internet Explorer.

    Does it matter whether you use www? Will the sign-in link open: https://signup.netflix.com/#do-login
    When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
    1. Bypass Firefox's Cache
    Use Ctrl+Shift+r to reload the page fresh from the server. Any difference? If not...
    2. Clear Firefox's Cache Completely
    orange Firefox button ''or'' Tools menu > Options > Advanced
    On the Network mini-tab > Cached Web Content : "Clear Now"
    3. If needed, remove the site's cookies in this dialog
    While viewing a page on the site, right-click and choose View Page Info > Security > "View Cookies"
    Then try reloading the page. Does that help?

  • My 160MB iPod Classic won't sync from iTunes.  This is a recent problem.  The error message is "The iPod cannot be synched.  An unknown error occurred (-39)." The end result is that music will sync but photos will not.  Current software on Mac and iPod.

    My iPod classic won't synch from iTunes.  This is a recent problem.  The error message reads "The iPod cannot be synched.  An unknown error occurred (-39)." The end result is that the music will sync but photos will not sync.  I am running current versions of software on the iPod and the iMac / iTunes.  HELP! J

    First try to resolve #2 by:
    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or               
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Featurs appin the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    - Try on another computer to help determine if computer or iPod problem
    If you can resolve #1 and still get same message for #1 then you have to restore the iPod like the message says.

  • Hi, when I connect my iPod to my computer it will register but it will not register in iTunes! Any help? Thanks.

    Hi, when I connect my iPod to my computer it will register but it will not register in iTunes! Any help? Thanks.

    Here:
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    or
    iOS: Device not recognized in iTunes for Windows

  • It says I can drag Pages documents from iMac to iCloud. But nothing shows up. Using latest with all turned on. How do I get Pages up to iCloud? The little wheel like action menu does not appear.

    It says I can drag Pages documents from iMac to iCloud. But nothing shows up.
    Using latest with all turned on. How do I get Pages up to iCloud? The little wheel like action menu does not appear.

    yes is tehre another way
    the directions do not explain anything other than drag
    or use the little action wheel menu

  • I can't download the Adobe Premiere Elements 13. Akamai Download pop up only the download window but downloading do not start. Alternate download Method will start but downloading will stopped always after 655 Megabytes. I have tried with different browse

    I can't download the Adobe Premiere Elements 13. Akamai Download pop up only the download window but downloading do not start. Alternate download Method will start but downloading will stopped always after 655 Megabytes. I have tried with different browsers, fire wall and virus protection off and also to download the trial of Adobe Premiere Elements 13 but result is every time same.

    if you follow all 7 steps you can directly download a trial here:  http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html
    and activate with your serial number.
    if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies. 
    the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com). 
    failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version.

Maybe you are looking for

  • Problem in RAR Background Jobs

    Hi Experts, We are facing a problem during Batch Risk Analysis- Batch Risk Parameters- System- RP1 Options- User Role Profile, Critical Actions and Role/Profile Analysis Management reports User and Role permission Level risks analysis run fine, but a

  • Insert Procedure For LOOP question

    Hi all, I have made a Procedure which basically massages data and loads into into another table and makes a time record aswell. I am practising my good datawarehousing practise (So load table into real DW_table) I am using an Explicit Cursor For Loop

  • BAPI for Picking and Post Goods Issue ?

    Hi All, Is there any BAPI for doing Picking and Post Goods Issue in VL02N ? I don't think we can use BAPI_OUTB_DELIVERY_CHANGE. Is it advisable to use BAPI or BDC ( if no BAPI exist ).  Thanks in Advance.

  • Version of Application Server for Oracle E-Business suite 12.0.4 ?

    Hi , I want to know the complete version of Application Server for Oracle E-Business suite 12.0.4 . The installation guide/ rapid install mention this : A) Oracle database 10.2.0.3 B)Applications Server : 10.1.3 oc4j C) Application Server : 10.1.2.2

  • ADDT Locks up DW CS3

    Hello, I am now experiencing the same problem found in the ColdFuison Forum where I can use the List Wizard just fine - but any time I try the INSERT RECORD Wizard or CREATE DYNAMIC FORM Wizard - Dreamweaver locks up - I thought that it may have to d