IMac internal optical drive reads and plays cd's but DVD's spin for a few moments then eject. Then any drive utility access results in the spinning wheel of doom. Then the optical drive doesn't show up anywhere until a restart. OSX 10.6.8 - Intel Core 2

iMac internal drive locks up after trying to play a DVD. CD's work properly. All preference settings are correct. I have tried several different DVD's that work in other drives. Drive is : HL-DT-ST DVDRW GA11N. After spinning wheel of doom goes away, so does the optical drive in Disk Utility and System Profiler and no disks work because the drive isn't there until a restsrt. Any ideas? Thanks.

The battery alone is a $5 to $15 part.  Hard drives vary in cost, and depending on the iMac, they may or may not be able to install a third party hard drive, or one resold through Apple.    The resold through Apple drives tend to cost more.  This article discusses the varying successes of third party drives on iMacs:
http://blog.macsales.com/10146-apple-further-restricts-upgrade-options-on-new-im acs 
The labor costs depend on the store as well as the time to get the parts in stock.    Call around.

Similar Messages

  • Ipod touch 5th generation battery screen with lightning bolt locked cannot charge or restart.  ive tried everything from new cables attempting to shut down but stays at screen for a few seconds then black screen again over and over

    screen locked up and shows the battery with low red and ligtning bolt and cannot hard shut down or reset just stays there for a few seconds then black screen. hooked up to computer and itunes doesnt recognize it or even shows that it is pluged in.  looked and made sure nothing is broken or metal in ligting port or on cable which would prevent it from accepting a charge. ipod is only a month old and seems like a waste of money if its so hard to try to get an explanation of why this is ive been tryning to get an answer from apple for a week now.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Internal Hard Drive doesn't show up on Time Machine menu. Why???

    So I recently bought a brand new MacBook G5 2.1 Ghz 1G RAM, and when I first set it up I had my external hard drive from my old PC laptop hooked up to and it instantly asked if I wanted to use it for my Time Machine disk. I said yes, but it then prompted me to reformat (delete) everything on the external drive.
    I tried later to use the internal hard drive as the Time Machine disk, but now it doesn't even show up when I look for it in system preferences as an option. Only the external hard drive (Maxtor OneTouch4 500G).
    Does anyone know how to make the internal drive appear again so I don't have to reformat my external drive?

    RyanRay wrote:
    yeah, I read in a pdf manual that you couldn't use the startup disk to backup, but I could almost swear I saw either Macintosh HD or something like that on the disk options menu when I first started up. Maybe I saw something else.
    So then there's no way to backup without an external drive of some sort? Do you know if it's possible to format a drive so that half of it is Mac compatible?
    that's possible but you'll have to reformat it first which will wipe it out. when you reformat it set the partition scheme to GUID and set the number of partitions to two. format one as FAT so that it works with windows and the other as mac Os extended journaled so that it can be used with Time machine.

  • My iphone/itunes just did the complete new update with Icloud but the icloud icon doesn't show up anywhere on the iphone or my computer even though the install said it is all done and complete.

    The Itunes and Iphone just did the complete new update addiing on Icloud and new applications.  After all was done and it said all was completed - the Icloud icon is not on my iphone screen anywhere nor is it on my computer after I did go to the control panel and set up.   I tried repairing the download and it said all was fine.  What needs to be done to get this all to work.

    Hi there,
    Thanks for the reply.  I did think that could be the case but then other books would also show up as apps on phone but not counted as an app.  Maybe book apps downloaded from the app store work in this way whereas books bought from the ibooks app show in ibooks and not as apps.
    I guess that would make sense, it must be because they are books but downloaded from the app store rather than the book store so they are visible as an app but don't actually get counted as an app.
    Would you think that's the case too?
    Thanks
    Adam

  • Final cut version 10.0.6 crashes every time I put my hard drive in... when it's already in and I click on final cut, it opens for a few seconds, then 'quits unexpectedly'

    Someone please help me, trying to edit a project for college and I literally can't. I don't understand why it's not working, I've been on utilities and checked the hard drive and there's nothing wrong with it and I've made sure there is enough space on the drive.

    Have you tried trashing the preferences?
    Many weird things happen as a result of corrupt preferences which can create a vast range of different symptoms, so whenever FCP X stops working properly in any way, trashing the preferences should be the first thing you do using this free app.
    http://www.digitalrebellion.com/prefman/
    Shut down FCP X, open PreferenceManager and in the window that appears:-
    1. Ensure that only  FCP X  is selected.
    2. Click Trash
    The job is done instantly and you can re-open FCP X.
    There is absolutely no danger in trashing preferences and you can do it as often as you like.
    The preferences are kept separately from FCP X and if there aren't any when FCP X opens it automatically creates new ones  .  .  .  instantly.

  • The document Address doesn't show the block when country isn't USA

    hello
    i have a little problem, when I create a new document for a customer which ship to address's country is different from USA, the document Address doesn't  show the block. i checked the bp address in the bp master data and the block is written, also when i click on the ... button near the ship or bill to address the block has a value !! but when i go back to the document, there is an empty space where the block has to be in the document address.
    is there any configuration to solve this problem
    thanks a lot!

    Hi,
    The configuration is under Admin-Setup-BP-Address Format. Each country has a built-in format for address initially.
    Thanks,
    Gordon

  • How can I import a movie into iMovie 09 from a hard drive?  The movie will open and play in idvd but breaks into separate files that can't be downloaded when I try to import.  Can it be done?

    How can I import a movie into iMovie 09 from a hard drive?  The movie will open and play in idvd but breaks into separate files that can't be downloaded when I try to import.  Can it be done? I am trying to create a disc of player highlights for a collegiate coach, and I am using movie files downloaded to my hard drive from a DVD created on a PC. 

    No unfortunately it won't open in quicktime either.  It does the same thing that Imovie does, separates it into two file folders audio and video, and if i select video it opens to reveal 8 files that cannot be selected.  VIDEO_TS.BUP, VIDEO_TS.IFO, VIDEO_TS.VOB,VTS_01_0.BUP, VTS_01_0.IFO, VTS_01_1.VOB, VTS_01_2.VB, VTS_01_3.VOB.  All of which cannot be opened or selected.
    Opening it in Idvd and folllowing your suggestion works and I get a format code of NTSC.  Is that the same?  Thank you for your time and response.
    CaCanuck

  • URGENT Trying to wipe and reinstall Leopard 10.5 on my 2008 imac8,1 from the disk but my hard drive doesn't show up

    So to give a little big of a background on my computer.  I got it January 2009 as a graduation gift, because I was going to get a degree in Graphic Design and Animation.  I only worked on it [mostly brousing the web, and itunes]  for about 6 months because I was taking all of my general courses for college.  I then met my boyfriend [late 2009] and moved in with him, my boyfriend has a macbook so I left my mac at my parents house.  I was only Using it every now and then and it would be idle/ or shut off the rest of the time. 
    Fast forward to fall 2011.  Me and my boyfriend live in a condo so I brought my computer over because I am now taking graphic design courses and need my computer.  I installed a free 30 day trial of adobe cs5.5.  It made my computer kind of slow and it froze alot even though I still have over 250gb's of memory in it.  After the trial ended I kind of stoped using my computer again,  rather installing the free trials of cs5.5 on my mom and my boyfriends macs until I had enought money saved up to buy it.
    Here's where it gets tricky.
    So now its March 2012 and I tried uninstalling the trial of cs5.5 on my computer since it was just taking up un needed space.  I had to uninstall all of the programs one at a time other wise it would freeze up.  I have had to hold the power button down to get it to turn off because i couldn't even move the mouse even after waiting a while.  Anyhow I get to the last program and it keeps freezing, I tried shutting down my computer via<apple< shut down. But when I start it up again I got a file with a question mark flashing on my screen.  So I looked up how to fix that and had to locate where to start up [I selected my hard drive] then I was able to get on to my computer.      
    So then I go to disk utilitys and do a repair on my internal hard drive to fix if there were any messed up files. After the files are repaired I figure I'll restart it and let everything get up to date.  When I do I get the gray screen with the apple and the spinning wheel.  This happens OVER and OVER.  I tried soft reseting it, manually turning off the computer, you name it.  But it still keeps happening.  So I figure I'll just wipe it clean and reinstall the whole thing. [I have it backed up on an external drive]
    I try to reinstall leopard 10.5 from the disk that came with my computer, all goes well until I gets to the 3rd screen where you select where to save it to, my hard drive doesn't show up.  But if I connect my external hard drive it shows up right away.  I try seeing if it pops up on disk utility, and it doesn't show up there either. 
    Is it possible that my hard drive is shot?  I haven't really used my computer that much.  Its pretty much sat at my parents house for 2 of the 3 years I've had it.  So its not like I used it a whole lot. 
    Help! I'm a college student who needs her mac now more than ever for my design classes!

    The battery alone is a $5 to $15 part.  Hard drives vary in cost, and depending on the iMac, they may or may not be able to install a third party hard drive, or one resold through Apple.    The resold through Apple drives tend to cost more.  This article discusses the varying successes of third party drives on iMacs:
    http://blog.macsales.com/10146-apple-further-restricts-upgrade-options-on-new-im acs 
    The labor costs depend on the store as well as the time to get the parts in stock.    Call around.

  • I have an external hard drive, from Iomega. However, I cannot copy or save any file to it. On my PC it says that is possible to read and write in it, but in my Mac, it says I can only read. can somebody help me?

    I have an external hard drive, from Iomega. that I can open and see my files. However, I cannot copy or save any file to it. On my PC I have it says that is possible to read and write in it, but in my Mac, it says I can only read. can somebody help me?
    Also, Im a photographer, so I like to name a lot of files at the same time (used to do in on PC and it was very usefull.) cannot find out how to do it on my Mac. Really appretiate if some one can give me a solution! Thanx

    Your drive is formatted with the NTFS file system.  OS X can read but not write to the NTFS file system.  There are third party drivers available that claim to add the ability to OS X to write to an NTFS partition.  I have not tried them and don't know if they work.
    The only file system that OS X and Windows can both write to natively is the FAT32 file system.

  • Can i use seagate goflex 3tb external hard drive for 2010 27" imac internal hard drive replacment if i take it out of the goflex case.do i need to format it before installation due to it allready having goflex software on it from manufacturer.

    i have 3tb seagate goflex external hard drive.its brand new in package.i took it out of case and deleted partitions that were created by manufacturer.so now i have 2800 gigs.its formatted ntfs.will it work for late 2010 27" imac internal hard drive replacement.i found a apple repair place that will charge me 50$ to swap drives for me assuming i have the drive.i will have to install leopard myself at this price.i dont want to have to pay for anything other than the swap.will this hard drive work with this format or do i need to format it differently.

    Hello
    formatted ntfs
    NTFS format not work on mac system , need to be formatted as Extended Mac os Journaled format and partition table need to be GUID
    how to do that in video
    HTH
    Pierre

  • HT3669 I have an imac running OS10.6.8 and an Apple laserwriter 16/600PS.  Is it possible to connect these directly without networking?  Where can I find the printer driver?

    I have an imac running OS10.6.8 and an Apple laserwriter 16/600PS.  Is it possible to connect these directly without networking?  Where can I find the printer driver?

    It turned out that WD is the big bad guy in this game.
    According the data rescue company where I asked for an inspection, both of the drives had their reader head loose. And in the one, which was my already-in-use disk its even damaged the platters... xxxxx
    So its time to pay bunch of money to recover, and take a walk to wd service to bang on the desk.
    Also note - it may be somehow related to intellispeed technology - since macs not really friendly with wd-s built-in solutions.
    On the other hand, with WD GP 1Tb there is no problems at all for ages.
    thanks guys, thread is closed

  • Having issues with hard drive, trying to start up football manager 2015 but it reads for a few seconds then ejects itself , ive tried other cds and it reads fine so tried older versions of football manager which ive used before and they dont either

    im having issues with hard drive im trying to install football manager 2015 it reads disk for a few seconds then ejects itself other cds read fine
    and have tried older versions of football manager and they dont read either
    any help would be greatly appreciated
    thanks

    Try resetting the SMC 2-3 times, if that does not work then the DVD may need cleaning. Get a dry cleaning kit from your local office supply store.
    Intel iMac SMC and PRAM resets

  • When I try to boot my macbook pro the startup manager doesn't show any drives. How can I solve this issue?

    when I try to boot my macbook pro the startup manager doesn't show any drives. How can I solve this issue?

    Please confirm what version of OS X you are running - I doubt it is the ancient OS 10.1 !

  • All of sudden, I can't launch iTunes as I get a popup saying "iTunes requires Quicktime 7.5.5 or later". I only have 7.4 currently and the apple site doesn't show anywhere to download Quicktime upgrade. Software Update detects no reqd updates. Help pls??

    all of sudden, I can't launch iTunes as I get a popup saying "iTunes requires Quicktime 7.5.5 or later". I only have 7.4 currently and the apple site doesn't show anywhere to download Quicktime upgrade. Software Update detects no reqd updates. Help pls??

    Here's a link to the QuickTime for Leopard 7.7 installer:
    http://support.apple.com/kb/DL761

  • My external hard drive doesn't show up in finder, is it dead?

    My external hard drive doesn't show up in finder.Time machine can't find it. Does this mean my external hard drive is dead?
    I borrowed a friends and switched mine with hers. My acted the same way in her macbook. I switched the cords on the external drives, no change.
    Also, Is there a way to retrieve the information from my sick external hard drive? Thanks for your help.

    If the Disk Utility sees it, you might be able to repair it or recover the data on it with a product such as DiskWarrior or Data Rescue.
    If the Disk Utility doesn't see it, contact professional support.
    (64290)

Maybe you are looking for