IMAC is freezing, ive tried all the other stuff nothing is working.
Do they not test these updates before sending them out? Seriously. Ive been trying an hour to get this **** thing to boot into safe mode/from a cd anything and its still giving me a blue screen.. this **** isn't supposed to happen with a mac.
You wouldn't perchance be using a bluetooth keyboard and mouse would you? If so, you may need a USB keyboard to get the Mac to understand your keyboard commands to boot with a DVD or into Safe Mode.
Similar Messages
-
I recently did a manual reboot after my MacBook Pro had frozen, and instead of the usual Apple and loading icon, it gave me the flashing question mark on a folder, which I've never encountered before. I looked up some possible reasons on my PC, and after reading that there's a problem with my HD I tried looking up how to back up my files so that I can do a clean reinstall of Yosemite (latest ver.). However, I've never used anything like Time Machine or anything else that could back up all my files, so it didn't sound like I could do anything about that at this point. I've also tried going into Disk Utility and attempting to repair the disk image. There was only 2 available, disk0 and the base system. I verified the base system, and told me there was nothing wrong (it didn't give me the option to repair anything either, on both available options). I don't think this is the right thing though, since my drive was called MacBook Pro HD. So basically this is the point I'm at now. Is there anything I can do that will repair my HD without erasing all my files?
I've tried all the suggestions and nothing has worked.
I verified the base system, and told me there was nothing wrong
Hold the option key on boot to see if you can select your Macintosh HD.
A flashing question mark or globe appears when you start your Mac - Apple Support
You can boot into Recovery and re-install the OS X on top of what you have. It will preserve your user data.
command R on boot.
Recovery http://support.apple.com/kb/HT4718 -
I cant re-store my iPhone through the iTunes. Message which comes up says' the iPhonw could not be restored. An unknown error occurred (21). i tried all the options and nothing seems working. please help
Hi chiekoo,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694#error21
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.
Best of luck,
Mario -
I have the iphone 4s. Ive tried to update my phone & its stuck on the connect to itunes screen. Ive tried to even restore my phone then update & i still have a error for both of them. I have the latest version of itunes & went through all the other steps. Its still not working & stuck on the connect to itunes & im growing extremly fusterated.
There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
-
TS1538 My iPod isn't showing in itunes i have tried all the suggestions yet nothing is working
The Windows 8 which I have recognizes that my iPod is connected however iTunes does not. I have tried all the things others have suggested as help guides but they are not working or simply too complex to do myself. All I want to do is put more music on my iPod but it seems like too big of an ask.
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Featurs appin the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
- Try on another computer to help determine if computer or iPod problem -
Been trying to restore Ipod touch for days after updating Itunes. Error code #9. Stuck on restore screen. Tried all the solutions posted. Tried on 2 computers, Vista + XP. No device shown on computer. Thanks Apple! Didn't have this problem before update. How about rolling back your update?
Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if you manually disconnect the device during the restore process. You can resolve this issue by using USB troubleshooting, using a different Dock Connector or Lightning Connector to USB cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software. -
my brother set a passcode on his ipod and forgot what it was, ive tried all the things other questions ask and a pop up comes and says cannot regester the ipod without unlocking it, what do i do????? anyone know
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
I can connect my Iphone 6 and Ipad Air to my Bose Soundlink but not my IMac. I have tried all the usual solutions but nothing works. It has worked recently but not in the last week. Help
make sure it's not being connected to by any of the other two
one can only connect 1 device at the time and just by waking up sometimes a headset connects to a device
automaticly
then forget the bluetooth device in OS X and put the headset in pairing mode / discovery mode and connect with it once again with the mac -
Ive tried all the shortcuts to do without start up discs, but it just keeps rebooting as normal..... Help. I cant download mavericks, Ive changed my apple id, and that didnt make any difference......
Any reinstallation is not going to be successful if you have invalid node structure. You have bigger fish to fry here than worrying about DVD access.
Mr Simpson wrote:
The first step of this was to do a 'fsck -fy' and here it told me I had a 'disk0s2: I/0 error.' and 'Invalid node structure' and the volume check had failed.
You also mention that the 10.6 disc would read from the DVD but not allow you into Disk Utility? What happened when you tried to access it? Was it selectable and then didn't do anything?
We can't really narrow down whether it is the DVD or anything else at this time.
If you don't have a backup of the information it is probably toast if you cannot get Disk Utility to work. I would normaly suggest DIsk Warrior but that is a $79 gamble if you are not sure if the drive is working or not. It may be your last hope to recover whatever you can from the drive.
Also, what was the original OS installed on the machine before it crashed? Was it 10.6 or was it the 10.5.7 you mentioned? -
Licensing has stopped working - I tried all the published options and none work. Acrobat 9 Pro Mac Air 10.9.5
Thank you for your helpHey,
Considering error "licensing has stopped working", you might need to try out the solutions mentioned in the following KB doc link:
Error "Licensing has stopped working" | Mac OS
Let me know if this helps.
Regards,
Anubha -
I have a 4th gen iPod touch that won't power up! I tried all the traditional stuff. I want to know how to tell if the battery is good. itunes see's the ipod in recovery mode. Tried dfu mode and did not work. Any ideas? I can hear the PC beep when plugging it in! I suspect a bad battery and trying to charge it ina wall charger made it hot!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. The appointment is free.
Apple Retail Store - Genius Bar -
Whenever I turn my MacBook pro on, all the other stuff is loaded (MS word/excel/powerpoint), Spotify, iCal, etc are automatically loaded, so in order for me to go to my desired website, I have to close (x) out all applications loaded. Please advise.
If you are using Lion:
Dealing With The Resume Feature of Lion
Managing Mac OS X Lion's application resume feature.
If you shutdown your computer you should get a dialog asking if you want applications to resume on the next startup. Simply uncheck the box to prevent that from occurring. Open General preferences and uncheck the option to Restore windows when quitting and re-opening apps. You can also install a third-party utility to control resume features on individual applications: RestoreMeNot or Application State Cleaner.
It is possible to completely stop the Resume feature although I'm unconvinced that it is that annoying. Nevertheless see the following:
If you have not yet done so you must first make your /Home/Library/ folder visible. Open the Terminal application in the Utilities folder. At the prompt paste the following command line:
chflags nohidden ~/Library
Press RETURN. Quit the Terminal application.
In the Finder navigate to the /Home/Library/Saved Application State/ folder. Delete the contents of the folder. Back up to the /Home/Library/ folder. Select the Saved Application State folder. Press COMMAND-I to open the Get Info window. In the Sharing and Permissions panel at the bottom click on the lock icon and authenticate. Set each of the listed entries to Read Only. Close the Get Info window.
Quit all open programs except the Finder (this is very important.) Next, navigate to the /Home/Library/Preferences/ByHost/ folder. Look for a .plist file with "com.apple.loginwindow." in the file name followed by some numbers in hexadecimal. Select the file. Press COMMAND-I to open the Get Info window and in the Sharing and Permissions panel click on the lock icon and authenticate. Set each of the listed entries to Read Only. Close the Get Info window. If you also find a file with the same filename but with a last extension of ".lockfile," then you should delete it.
The above should eliminate the Resume feature system-wide. Note that any future system updates or upgrades will likely undo these changes. You will then need to repeat this procedure assuming there are no major changes in OS X related to it. -
For a while now my computer has been saying " Start up disk is nearly full", however I don't have a lot of stuff saved on the computer I moved a lot to a flash drive, and all the other stuff are songs and recently saved essays for school. I have and frequently empty my trash can. I have researched this before and i see a lot of things that say get a external hard drive, but before I go and purchase one I want to make sure there is no other, simpler way, to solve this problem. Help Please.
You need an external drive so you can free up disk space. Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure you have a minimum of 15% free disk space.
Freeing space on your Mac OS X startup disk -
I did the update today and now itunes can't see my ipod, uninstalled iTunes and all the recommended things, nothing has worked.
It worked just fine last weekend. I have windows 8.1 and a brand new pc, new iPod also, the new Nano. now after the update today, iTunes says iPod has been detected but could not be indentified properly. I can see it in windows. I tried the reset on the iPod also. what else can I do?? HELPuninstalled iTunes and all the recommended things
Doublechecking. Have you tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8 -
Last night, my system was still using Firefox 3.5.8. I was playing Farmville on Facebook and everything was working fine. This morning, I log onto my computer and find that I am upgraded to Firefox 3.6. I have been trying to play Farmville all morning, and the Adobe Flash Player keeps crashing. I have tried to update the Flash Player. I have tried restarting the computer. Nothing is working.
== URL of affected sites ==
http://facebook.comTo anyone experiencing this problem after trying the steps I posted above, try this potential solution:
# Open Tools->Add-Ons->Plugins, find Shockwave Flash, and press Disable
# Hold down the '''Windows logo key''' and press '''R''' to bring up the ''Run'' dialog.
# Type '''%APPDATA%''' and press OK.
# Open the Adobe folder
# Right click on the Flash Player folder and press '''Rename'''. Type in ''Old Flash Player'' as the new name.
# Go back to the Application Data or AppData folder. (On Windows XP, click '''Up''' in the toolbar. On Windows 7 or Vista, click AppData in the address bar)
# Open the Macromedia folder and repeat step #5
# Go back to the add-ons window from step #1, and press Enable on Shockwave Flash
# Try Farmville, Youtube, and other affected sites to see if the problem is fixed.
Maybe you are looking for
-
How do I create a form using data collected from a previously completed form?
I need my users to fill in an initial registration form with a range of details. Six months or so later I need to ask the users to confirm the details and also fill in new information. Is there a way I can have the second form be automatically popula
-
How to populate a list box linked to selection in combo box?
Hi All, I am a beginner in Xcelsius. I am having problem on how to populate a list box based on the selection on my combo box. I have a combo box and a list box. The combo box value consist of Countries. Values are: Singapore Indonesia Thailand When
-
Is there a Virtual Box Appliance available with OWB 11gR2?
Does anyone know if such a thing is available (like the Developer Days appliance, but set up for DW)? Thanks.
-
"Rickroll" sites and Safari 5.1
So I got sent to one of those rickroll sites with automated alerts on the new Safari, well I couldn't do anything at all and simply quitting Safari only made things worse. Now I can't get into Safari at all because of the whole autosave thing. Can't
-
This is a multi-part message in MIME format. ------=_NextPart_000_0244_01C8AAC5.426DA3E0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hola a to2, Tengo varios flv en una misma capa cada uno distinto... y