IMac is no longer finding my shared MBP or other shared computers.

I got a new iMac (Mountain Lion) for Christmas 2012 and when I turned on my old MBP and allowed sharing, the MBP showed up immediately in the connected servers (Finder sidebar). I turned off my computers a few days ago and now I cannot see either computer or the other shared computers in my household that also used to show.  I've checked the Wifi settings and they match as well as being on the same network and no changes have been made to our network (router).  Ive also tried rebooting both computers with no luck.  I'm stuck and can only print via printer sharing and need it for teaching.  Please help!  Thanks!

Great news, thanks!

Similar Messages

  • TS2655 imac can no longer find the time capsule to add it...how do i fix this

    my imac can no longer find the time capsule....i had to delete the old network and re add the time capsule to create a new one and now the imac keeps searching for the base and cant locate it

    If you mean that Time Machine can't find the Time Capsule, I'd try using the Time Machine panel of System Preferences to redeclare your backup disk.  If that's not what you mean, please explain.

  • My iMac can no longer find one of the external hard drive

    My iMac can no longer find one of the external hard drive. It was finding it once in awhile and during one of those times I ran Disk Utility and all was OK. Any ideas?

    Well duh.  I restarted the router and then it was able to find the printer.  There you go.  Thanks.

  • My iMac can no longer find my Canon Mg-5320 on the network.

    I have a 2012 iMac and a Canon MG-5320 printer connected on home wifi.  It was working fine when last I checked, about a month ago.  Today the iMac can't find the printer on the network.  I ran the setup on the printer, even though it runs fine on the PCs in the house and my iPad.  I started and restarted both machines.  I reinstalled the driver.  The iMac still can't find it on the network.

    Well duh.  I restarted the router and then it was able to find the printer.  There you go.  Thanks.

  • Airport TimeCapsule wireless works fine, but iMac can no longer find the time capsule disk for backups.

    Hi,
    I have a new Airport TimeCapsule that I set up about two weeks ago in combination with a new iMac running OS 10.9.4.  It ran fine until 2 days ago, when the TC disk image disappeared from the iMac and Time Machine was not able to back up.  I tried to find the TC in Airport Utility and it states the "Airport Time Capsule was previously part of your network. Check that it is still in range of your network and is plugged into a power outlet..."  I've tried restarting the time capsule. I've tried restarting everything in order (modem>TC>iMac) and the iMac still cannot see the TC disk.
    I've had two other issues that I will list in case they are all related somehow:
    1) The time capsule took several attempts to set up when I first bought it.  I had to reset the TC several times before I got all the way through the set up process successfully.
    2) I tried hooking up my printer to the USB port on the airport time capsule and although my MacBook could see it and print to it just fine, my iMac was never able to see it.
    The TC is hooked up to the iMac via ethernet cable.  Does any of this sound familiar to anyone?  I'm about ready to send the time capsule back and just resurrect my old airport that worked flawlessly for years.  This airport TC has been a huge disappointment so far.
    Thanks

    There are some real issues between Mavericks and TC .. (or just network bugginess!!)
    There is a heap of things you can do but it is easier to just run through the whole lot in order. None is necessarily the cure and that is why doing all is important.
    The list is in this thread.
    Airport Utility shows "unexpected error - please try again" when connecting to Time Capsule
    In your case using ethernet can be a problem.. let me say please make sure you have ipv6 set to link-local only in your ethernet setup. I usually only show it in wireless but for you it must be ethernet. The wireless connection seems to be utterly required now for connection.. and hidden away into the airport utility is a switch over from wireless to ethernet. When I made the manual setup instructions above this particular ability (or stupidity) of the Airport Utility was not apparent to me.
    So here is typical Airport Utility (AU) v6.. but it is actually working over wireless only. (The v5 utility was wireless + ethernet).
    I have an ethernet client on the network that is completely invisible.
    Click on the Other WiFi Devices (wrongly named.. it should say other devices).
    And you will see the option to choose ethernet.
    Then the AU sees the ethernet client and none of the wireless clients.. brilliant stuff eh??
    PS this is just a test setup.. never would I have any TC with such an illegal name.. But I hope it shows you what to do.
    Fix the names.. most important.. keep them short.. less than 10 characters all the better.
    No spaces and pure alphanumeric.

  • IMac will no longer find my wireless network.

    Hello, I have seen several posts for this on the net but no one seems to have a resolution. I have an iMac running OS X 10.6.3. I was not having any issues connecting to my personal WEP password protected network until just a few days ago. My computer does not list my network as an available option anymore and despite my best efforts I cannot get it to reappear. I have tried refreshing my IP address, removing preferred networks, deleting key chains and everything else I can think of. I had not changed any settings or downloaded any updates so I'm not sure why it suddenly stopped working. I have reset my router multiple times and even moved my computer so its right next to it and still nothing. Any suggestions would be great. It can find all of my neighbors networks just not mine. My roommate also runs a PC laptop and has no issues logging in.
    Please help!!

    Turn of the MG and unplug the power cord. Leave it off for about a minute and then reconnect the power cord and turn the power back on. Wait while the device attempts to reconnect to your wireless network - the blue wifi symbol on the MG will flash and then stay on once it has connected. If it keeps flashing then you will have to reconnect the MG to your wireless access point via the control panel on the MG.

  • IMac Can No Longer See MBP for File Sharing

    Hello all,
    I have had my iMac and MBP set up for ages to see one another and share files. Worked like a charm. Now, all of a sudden, the iMac can no longer see the MBP - but - the MBP CAN see the iMac and connect. Odd??
    To my knowledge, nothing has been changed on my end. File Sharing is on. Firewall is off. Both units have the latest updates from Apple and the AEBS has the latest firmware and is working pefectly.
    What can I do to troubleshoot this?
    Thanks,
    Stu

    Thanks for the help!
    Well, when I rebooted the MBP, it magically appeared on the iMac..so I thought all was well. However, I am now suspicious of the iMac as the culprit.
    For example, I have a USB Disk connected to the AEBS - and the iMac is connected to it right now, showing the ddisk icon on the desktop. I can browse the contents.
    However, when clicking on Network in the Finder, the AEBS does not appear at all! Even though I am connected to the disk. Why would this be?
    I am not against trying your idea - but this new information might point us in another direction?
    Stu

  • I could no longer find hotspot menu for sharing my cellular data on IOS 8.1.3. Please help!

    i have just upgraded to IOS 8.1.3 from IOS 7.1.2 , and I could no longer find my hotspot menu for sharing my cellular data with my other devices.
    what should I do?

    Hello rotimifelix,
    Thank you for contributing to the Apple Support Communities.
    If Personal Hotspot doesn't seem to be enabled on your iPhone after updating to iOS 8, check for the option in both of these locations in Settings:
    Turn Personal Hotspot off and on: Tap Settings > Personal Hotspot or Settings > Cellular > Personal Hotspot.
    If the menu option can't be found, you may want to contact your carrier to ensure your account is set up correctly:
    Verify that your carrier supports Personal Hotspot for your device and that you have Personal Hotspot enabled on your cellular plan:
    iPhone: View a list of carriers that support Personal Hotspot on the iPhone.
    If the issue continues, try these troubleshooting steps next:
    Reset your network settings: Tap Settings > General > Reset > Reset Network Settings.
    If you still see the issue, restore the iPhone.
    You can find the information and steps above, as well as more troubleshooting advice, in these support articles:
    iOS: System requirements for Personal Hotspot - Apple Support
    iOS: Troubleshooting Personal Hotspot - Apple Support
    Best Regards,
    Jeremy

  • MBP can no longer find TC

    My laptop no longer finds my TC, either for reading or writing.  It sees the wiresless network run by the airport just fine, and a second laptop is backing up as usual to the TC, but this one computer is never able to locate the TC.  It possible that the last time it successfully backed up was around the time I did a software update on the Time Capsule -- perhaps related to my current problem?
    Any suggestions?
    Thanks.

    Yes, particularly if the problem machine is Lion and the one working properly is SL.. Apple seem to have a few bugs in the system.
    You can go back to previous firmware.. alot of us have done that..
    And there might be other ways to access the TC.. but not for TM.
    When you say reading or writing to the TC do you mean TM or just using it to store files??

  • I have an iMac with OS X 10.5.8 and Time Machine no longer finds the backup device. It had initially worked. I have checked the connections and restarted the backup device but cannot make it work. What actions should I take to correct this?

    Time Machine no longer finds the backup device

    Have you looked through Pondini's extensive TM help site?
    http://Pondini.org/TM/FAQ.html
    http://pondini.org/TM/Troubleshooting.html
    Can't imagine something not being covered there.

  • I haven't used my desktop iMac in a long time and can't get pass the opening login...I thought I remembered my password, but, apparently not.  How do I change it.  I don't THINK I have a "master password" on the thing.  I've never used one on any of

    I haven't used my IMac in a long time and went to boot it up, and I find I don't remember the correct username and password (I use several computers..I try to keep the passwords similar, with a number for the chronological order in which I started using them) I've tried all the others I use for passwords. The 'hint" keeps coming up for the password I am pretty sure is the correct one, but, still cannot get in.  I also don't remember whether I changed my surname on the computer...it was changed legally a little while ago, but some of my older devices still have my birth-name in there)
    HELP
    I don't think I ever set up a "master password" on the thing...I never use those.  I am the only person with access to my personal devices.
    thanks

    Forgot Your Account Password
    For Lion, Mountain Lion, or Mavericks
        Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
         When the menubar appears select Terminal from the Utilities menu.
         Enter resetpassword at the prompt and press RETURN. Follow
         instructions in the dialog window that will appear.
         Or see:
           Reset a Mac OS X 10.7 Lion Password
           OS X Mountain Lion- Reset a login password,
           OS X Mavericks- Solve password problems,
           OS X Lion- Apple ID can be used to reset your user account password.
    For Snow Leopard and earlier with installer DVD
         Mac OS X 10.6- If you forget your administrator password,
         OS X- Changing or resetting an account password (Snow Leopard and earlier).
    For Snow Leopard and earlier without installer DVD
        How to reset your Mac OS X password without an installer disc | MacYourself
        Reset OS X Password Without an OS X CD — Tech News and Analysis
        How To Create A New Administrator Account - Hack Mac

  • IMac will no longer connect to my Airport wireless network

    I set up a wireless network at home using Airport Express some time ago, but as of yesterday my iMac will no longer connect to it. The name of the wireless network still appears in the list of visible networks but when I try to connect it just times out. The iMac is only about 12 feet away from the Airport Express access point, and both my MBP and my iPhone are both able to connect as normal without a problem, but the iMac will no longer connect. I have made no changes at all to the network, or the iMac - it just no longer connects. Any help would be much appreciated.
    Jason.

    If everything else is connecting with no issues, I would go into the wifi setting on the iPad and redo the info there, user, password and anything else related to your wifi at your house.
    It is possible whatever he reset may have reset something to default setting which will not allow it to connect. If you need too then verify the wifi setting by comparing it with another device setting that works on your home network.
    Good luck

  • I can no longer find my apple TV with my iTunes, need to pair them, suggestions?

    Hi, I can no longer find my Apple TV with the new version on iTunes (i'm on OS X) on my computer, I need it so I can pair the Apple TV and iTunes account, any suggestions?
    Thanks!

    if it's an appletv 1g then you should go to settings on your appletv and remove the bind with the computer
    and then set it up again
    if it's the small black appletv then you don't pair them from itunes you only use it as airplay speaker and the atv access the itunes shared lib

  • ITunes no longer finding iOS devices

    All of sudden iTunes is no longer finding my iOS devices.  I have an iPhone 6 and an iPad Air 2.  I have connected both to my iMac running latest OS, using the lightning cable.  It worked fine till about an hour ago.  Now both devices keep prompting me to trust my mac.  I click trust and nothing happens.  Disconnect and reconnect and same thing appears on my iOS devices.
    I have reset both devices, reloaded iTunes and reset my Mac, nothing seems to work.  Odd thing is that I can still connect all devices to my Apple TV, which is normally temperamental and drops the connection to iTunes half way through a show.
    Anyone else having this issue?
    iTunes and iOS are definitely full of bugs between this and the missing TV Show Art Work, it is becoming very tiresome waiting on Apple releasing updates

    In my experience, yeah, everything was fine. Until the next day, when you have to shut down and restart again. And then the next day.... ridiculous.

  • My old Intel-Based iMac is no longer recognizing USB wired input devices; it only recognizes Bluetooth.  What happened?

    My friend's old Intel-Based iMac is no longer recognizing USB-wired input devices (Kensington TrackBall, Logitech Mouse) plugged into any USB slot at the back of the computer.
    They were working before and for many years.
    All of a sudden, A pop up window came up. IT said no Bluetooth mice could be found.  We don't know what set off that window to pop up and look for a WL mouse. It never has before in the 5 or more years my friend has been using this computer.
    I supplied a wireless Apple mouse and his is back running again.
    But want to know why his USB-input devices (Except his keyboard) are not being recognized. He would prefer to use his  Trackpad (Wired), but can't find anything in SYstem PReferences to allow that.  The computer only seems to want a Bluetooth input device.
    Anyone have an idea what happened and if this can be reversed?
    I think he is still running Mac OS X 10.5.8.

    Hi Carol, lets try this...
    reset FW bus, same goes for USB reset...
    Reset the Firewire bus
    If your Firewire or USB isn't recognizing any device.  A solution which has worked for some whose hard drive became invisible in 10.4 was simply to follow these four steps to reset the Firewire/USB bus:
    1. Shut the machine down.
    2. UNPLUG the power lead to the computer and any firewire/USB drive/devices.
    3. leave it for 10 minutes.
    4. Connect back up and reboot.
    http://www.macmaps.com/firewirebug2.html

Maybe you are looking for

  • DuplicateKeyException

    Hello! I am using a receiver file adapter with a content conversion with j2ee jms adapter in the module chain. When I am trying to poll a message I always receive the follwowing error message in the runtime workbench: "Message ID 634a89b0-2663-11dd-8

  • Strange thin line of 'noise' across all video playback

    Hey, another problem I'm currently having... for no reason my mac has started displaying a flashing line of what I can only describe as 'noise', it's very thin only a few pixels high but as wide as the video playback. This happens in FCP on my viewer

  • How to implement a shuttle

    Hi, Is there a way of implementing a shuttle in HTMLDB? I would like a page with two data-driven side-by-side lists that th user can transfer easily between the lists. I seem to remember somewhere in the HTMLDB admin pages this was actually used, but

  • How To Remove Original Applications

    Hello! I was wondering if its possible to remove the original applications that we've got with the iPhone? Like Weather or Stocks or Notes? Thanks for your help. Vinny.

  • DisplayConfigX blacked out my screen!!!!

    I used DisplayConfigX to adjust the picture of my MacMini on the TV screen. Apparently I set it to some resolution the TV can't handle. Now I can't see anything. How do I unistall the software? Can I restart from the disk somehow?