IMac is slow to wake from sleep, or doesn't wake at all sometimes

hi guys
I have a mac from late last year, i have updated software to 10.8.3, and found another update to help wake the mac up.  I have enabled hot corners, so you can you the mac to sleep by touching the corner, then swiping the track pad to wake....this will work for about 15 mins or so.  If you leave the screen for 2-4 hours, approx half the time you need to push the button on the back to start it back up.  Sometimes you will swipe the track pad, it will wake but the keyboard won't be working.  So then have to restart and all is well again.
Am i missing something? 

Have you read for possible solutions over in the "More Like This" thread over here?-----------------------> 

Similar Messages

  • When mac wakes from sleep, the hard drive wakes but the screen is black

    It's a problem I've been having off and on for quite a while with my ~2010 MacBook Pro. Sporadically/randomly, when I wake my computer from sleep or turn it on, the status light turns on and the hard drive makes sounds like it's on, but the screen stays black. The only way to get it on again is to manually hold the power button to shut if off and start it up again. Sometimes, the same issue reoccurs when I restart it and I have to manually restart it 5 or 6 times until it finally turns on normally, or I just get tired and give up. I've had everything done at the genius bar, from getting a new hard drive to running diagnostic testing. Nothing works. Any suggestions??

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

  • Wakes from sleep very slowly, starting to flicker sometimes, very slow to load websites

    wakes from sleep very slowly, screen starting to flicker sometimes, very slow to load. i use microsoft email and just did an update. did this affect my system? My msn mail is awkward..... today, beeping sounds starting at random. ???

    i did a restore off the Toshiba discs i had made, and again, it ran fine in the beginning, then all of sudden a month or two, and it started being slow again.
    I expect something you installed or updated caused the trouble. Best strategy is to identify the culprit.
    I would restore from the Toshiba discs again. Then carefully add things one-at-a-time, rebooting, and checking things out after each.
    Be sure you create a restore point prior to adding hardware or installing software. Microsoft programs like Windows Update will automatically make one before installing anything.
    -Jerry

  • My iMac has suddenly become very slow to wake from "sleep." Why? How can I fix this?

    My iMac has suddenly become very slow to wake from "sleep." How do I fix this and what is causing the problem? Even the mouse wakes very slowly.

    Try these basic troubleshooting steps.
    1. Quit all app scompletely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    2. Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    3. Go to Settings>Safari>Clear History, Cookies and Data. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

  • Mac Book pro slow to wake from sleep

    Hi , Sometimes when I leave my mac book pro and it goes to sleep (screen goes black when lid open) it takes a while to wake from sleep again - sometimes up to 30-40 seconds? This seems very odd for an expensive machine that is around 6 months old and something that never used to happen with my old powerbook G4. It doesn't happen all the time but regularly. Should I be worried? Any help greatly appreciated!

    I'm curious if you ever found a solution for this issue.  I recently purchased the SanDisk Extreme II 480GB, replacing my OWC Extreme Pro 240GB.  The OWC never experienced the "slow to wake" issue whereas the SanDisk drive does, consistently.  To make sure I'm having the same symptoms, this is what happens to me:  Put the mac to sleep (either manually or letting it do it on its own, waiting for the led to pulse showing that it is asleep), then wake it up (press a key on the keyboard), the logon screen shows almost immediately but as soon as I try to type the pinwheel/beach ball shows up, I wait between 20 and 30 seconds and then I'm able to type and all is well.
    I contataced SanDisk and their support was horrible.  They simply told me "contact MAC for this issue" (no joke, not "contact Apple" but "contact MAC", in all caps).  I explained that it works fine with the OWC drive just not the SanDisk.  They replied with another article showing that all macs have trouble waking from sleep (not true). I replied again indicating that I've never had this issue with any of my 3rd party drives, only this SanDisk.  Then the replied simply stating that all mac's have issues with 3rd party hard drives when waking from sleep.  At this point I threw a fit and yelled at my screen, even though it wasn't my screens fault.
    In any case, their support has not been willing to do any actual troubleshooting.  I'd love to return it and I might have to - but as you stated, it's annoying to have this issue but the performance is fine the rest of the time.
    Thanks for any input you have.
    Bryan

  • External hard drives ejecting after iMac wakes from sleep.

    External hard drive keeps ejecting after iMac wakes from sleep. TM does not recognise, so have to unplug then re plug in Ext HD, only then TM will perform a back up. Not seamless backups. Help to resolve would be grand

    Ive got the same problem with a Western Digital 500GB My Book Pro on my iMac Ive tried it on a few other machines and I think its happened on them, I say think because it was only when it had happened a couple of time that I started to take notice of circumstances etc and ive only had the drive a week, downloaded what may be a more uptodate "My Button manager" from the WD site still happened but Ive got this idea that it didnt happen on one machine which may not have had the MyButton thing on at that time, have you solved it yet I am using USB at the moment.
    20" iMac 2.13Ghz   Mac OS X (10.4.8)  

  • Folder always opens when imac wakes from sleep

    Don't think its a huge problem but when new imac wakes from sleep the same folder always pops up on screen(shaded in black). It always has to be closed before I can proceed with anything.Any suggestions would be appreciated. Also the folders name is always highlighted red. Thanks

    Searching the web for "appcode.hex" the first item that I found was for something related to an Olevia TV.
    A .exe file is a Windows file and will not run under Mac OS X.
    Installer Vise "Creates software installers for Windows or Macintosh.(MindVision Software)"

  • My elderly iMac (about six years old) won't wake from sleep after an electrical failure today, and starts up with a black screen.

    This Intel iMac is about six years old, has had the motherboard replaced by Apple.  Today we had an electrical failure, and it was asleep at the time.  It refused to wake from sleep, and it seems to start up, but the screen stays black.  I tried zapping the PRAM, shutting it down and turning off the surge protector, etc. . .  and still, nothing.  Any thoughts?

    If http://support.apple.com/kb/HT3964 Intel-based Macs: Resetting the System Management Controller (SMC) does not work and you are comfortable working in the Terminal, try the following:
    Enter into the Terminal the following: sudo pmset autopoweroff 0 and sudo pmset standby 0
    If you like the hibernation, you can switch it back on by re-entering the commands with 1's instead of 0's. You can even change the amount of time by adjusting "autopoweroffdelay" and "standbydelay".

  • IMac will not wake from sleep after 10.4.8 Update

    Recently after a couple of software updates my IMac goes to sleep and the Bluetooth keyboard and mouse will not wake it. The option for wake with Bluetooth is checked. I zapped the PRAM and also checked the HD, Nothing has changed. NOTE: No new software or hardware installs were done except for 10.4.8 update and the other mac software updates. This did not happen in prior versions of the OS on my iMac. Is this a new bug?
    iMac G5 1.8 (pre iSight)   Mac OS X (10.4.8)   Bluetooth, Wake from Sleep

    I've been dealing with this same issue, have tried everything, but to no avail. After MANY sessions on the phone with Apple tech support, as well as an Apple product specialist, I was advised to erase my computer and do a fresh install. I did an archive an install, which didn't help, but am not thrilled about the prospect of erasing everything and starting over. This problem started after the August 2006 round of updates. I feel it's bluetooth related, because I used a usb keyboard and mouse for a week as a test, with no problem. The funny thing is, I unchecked "allow bluetooth device to wake computer" thinking it might help, but the bluetooth devices continue to wake the computer anyway (except when it refuses to wake, of course!)
    Jerry

  • IMac wakes from sleep on its own with Yosemite

    After installing Yosemite, my iMac wakes from sleep all on its own multiple times throughout the day and night.  The screen does not turn on when this occurs and it goes back to sleep on its own.  I figured the my energy settings may have changed after the upgrade, but nothing is different.  I have no schedule set and the "wake for network access" is unchecked.

    To my knowledge, any Mac that is 1. connected to power and 2. not powered down will wake periodically for the reasons I explained, and perhaps for additional reasons known only to Apple. If disabling "wake for network access" does not change anything, all I can say is that it's working as Apple intends it to work. Before you ask, I strongly discourage you from finding clever system "hacks" or workarounds to prevent your Mac from working as designed.
    It may or may not be a bug. Whether it is or not though, if it bothers you, consider providing feedback to Apple.
    When questions such as yours arise, it helps to look at iOS. iPads and iPhones will all periodically connect themselves for the purposes of downloading emails, Messages, alerts etc. There is no way to disable that, other than to completely power down the device, which almost no one does. Apple has been inexorably changing OS X to effectively implement iOS design features such as this – for better or worse is not for us to say.
    May I ask why this concerns you? Perhaps that would lend some insight regarding possible solutions.

  • Intuos4 tablet won't work when iMac wakes from sleep

    Whenever my iMac wakes from sleep my Intuos4 tablet no longer functions (I use it in place of my Magic Mouse). Has anyone had this issue?

    Viking501,
    You may want to mark this thread with a correct answer which you will find in the Legend to the right. This may help other people with a similar issue.

  • IMac (Early 2009) always wakes from sleep after Security Update 2010-001

    I posted this already in the Snow Leopard section, but wasn't able to get a resolution to the problem:
    http://discussions.apple.com/thread.jspa?threadID=2309613&tstart=0
    I tried all the suggested things, but my iMac still always wakes from sleep and this never happened before the 2010-001 security update. I was asked to paste the console log entry from when this happens, so here it is:
    28/01/2010 08:57:47 kernel Wake reason = OHC2
    28/01/2010 08:57:47 kernel System Wake
    28/01/2010 08:57:47 kernel Previous Sleep Cause: 5
    28/01/2010 08:57:47 kernel USB (OHCI):Port 1 on bus 0x6 has remote wakeup from some device
    I'm wondering if others have seen this and if so know of a solution. At the moment I'm stuck with having to shutdown my iMac every time I leave it. Thanks.

    Here is a solution that should work:
    1. Turn off all Bluetooth devices connected to your computer.
    2. Make sure Bluetooth icon in the Menu Bar is black (BT is On) and BT is not connected to anything
    3. Plug in a USB mouse
    4. Go to System Preferences>Bluetooth>Advanced
    5. The option to "Allow Bluetooth devices to wake this computer" should now be uncheckable>Uncheck it and click OK
    6. Turn on your Bluetooth devices and let them connect to your Mac
    7. Try and put your Mac to sleep and then wake with the power button
    8. Check if the "Allow Bluetooth devices to wake this computer" option is still unchecked (it should be)
    9. Try and restart your Mac and check again if the "Allow Bluetooth devices to wake this computer" option is still unchecked (I had mixed results with this test, depending on the type of the Mac being tested)
    Anyhow, this way you should be able to uncheck the option that causes the issue and it should not get checked again by itself unless you restart your computer and maybe even after that. If it does get checked again after reboot, just get used to putting your Mac only to sleep until a fix from Apple is available or repeat the above process after every reboot if necessary.
    Hope this helps.
    Marian

  • New iMac wakes from sleep sluggishly and requires password despite preference setting

    My new iMac (Core i7) wakes from sleep very sluggishly and it requires a password despite the fact that I have de-selected this option in Preferences.
    I have a new iMac.  I used Migration Assistant to move everything from my older Mac Pro, which was running Lion.  Under the Secucrity settings in Preferences, I de-selected "Require Password."
    I use a bluetooth mouse and wireless keyboard.  Typically I click the mouse to wake up my Mac.  The screen comes to life and the cursor moves with the mouse, but...how can I explain this?  When I move the mouse in this situation, the cursor paints a gray swath over the desktop screen.  It looks like I am using a paint program.
    After clicking the mouse repeatedly the computer becomes responsive and the password entry screen appears--most of the time.  I have tried to set it up so a password is not required, but usually I get this screen.  SOMETIMES, it behaves correctly--say one-fourth of the time.
    Another problem...  When I shut the iMac off and then back on, it does not always link to my Apple bluetooth mouse.  I have to connect a USB mouse and re-link the wireless mouse.
    I wonder if this is a software/OS issue.  My old Mac Pro had similar wake-up issues, and I wonder if Migration Assistant transferred them to my new machine.
    Your thoughts and great ideas are appreciated.
    John Graham
    Fort Collins, CO

    I too am having trouble with my bluetooth mouse after upgrading to 10.7.2 and the associated iOS 5 upgrades.  The mouse keeps losing its connection.  I've turned bluetooth off, trashed the preferences, rebooted and repaired both the keyboard and mouse but the mouse keeping dropping out.  Keyboard seems ok.  Anyone have any ideas? 
    Len

  • HT1338 why do i lose wi-fi internet connection on iMac when computer wakes from sleep

    Everytime my imac wakes from sleep I lose internet connection and have to go into network and reconnect.  I am using OS X Mountain Lion software.  Please help!

    You might try looking at these Apple support articles:
    http://support.apple.com/kb/PH11099
    http://support.apple.com/kb/PH10662 - very simple suggestions only
    Here is another thread with a suggestion:
    https://discussions.apple.com/message/18848093#18848093
    You also might want to consider filing a feedback report. A lot of people are having similiar problems:
    http://www.apple.com/feedback/
    If you monitor the "More Like This" box (top right), other threads appear. Opening them usually displays other threads.

  • I lose internet connection on iMac when it wakes from sleep

    Everytime my imac wakes from sleep I lose Wi-Fi connection.  I am using OS X Mountain Lion.  Please help

    You might try looking at these Apple support articles:
    http://support.apple.com/kb/PH11099
    http://support.apple.com/kb/PH10662 - very simple suggestions only
    Here is another thread with a suggestion:
    https://discussions.apple.com/message/18848093#18848093
    You also might want to consider filing a feedback report. A lot of people are having similiar problems:
    http://www.apple.com/feedback/
    If you monitor the "More Like This" box (top right), other threads appear. Opening them usually displays other threads.

Maybe you are looking for

  • Outlook 2013 set cached mode "Mail to keep offline" to All for existing Outlook profiles via GPO or registry changes

    We recently migrated from Office 2010 to Office 2013.  An annoying change is Outlook's "Use Cached Exchange Mode" setting that changes the previous setting of all email to partial email based on how old emails are.  This is confusing for end users be

  • JTextField max length, JTextArea automatic scrolling

    i cant find how to do 2 things, i would like to limit the size of the text entered in a JTextField i could probably do this by making its KeyListener trim off the extra from getText() and use setText(whateverIsLeft) but i was hoping there was a bette

  • Oracle portal and session tracking

    Friend I am working in JDeveloper in my PC and my statements in with setAttribute and getAttribute does work ,but the same statement doesn't work when I use this jsp as my portlet.The error is given below.So portal doesnot support this method's ? Met

  • Paper preferences with Epson R1800

    I am trying to print on glossy paper with iPhoto 08. I cannot find that option. I can only find Matte or Fine Matte. Any suggestions.

  • URGENT : Error 5 when checking the job status

    Hello Forum, While monitoring the Process Chains in BW 3.1, I got the following message in the <b>Information </b>Pop-up: <b>Error 5 when checking the job status</b> Could you please tell me what it means? Thank you, its my duty to assign points, raj